LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Pankaj Gupta <pagupta@redhat.com>
To: David Hildenbrand <david@redhat.com>
Cc: linux-nvdimm@lists.01.org, linux-kernel@vger.kernel.org,
	virtualization@lists.linux-foundation.org, kvm@vger.kernel.org,
	linux-fsdevel@vger.kernel.org, linux-acpi@vger.kernel.org,
	qemu-devel@nongnu.org, linux-ext4@vger.kernel.org,
	linux-xfs@vger.kernel.org,
	dan j williams <dan.j.williams@intel.com>,
	zwisler@kernel.org, vishal l verma <vishal.l.verma@intel.com>,
	dave jiang <dave.jiang@intel.com>,
	mst@redhat.com, jasowang@redhat.com, willy@infradead.org,
	rjw@rjwysocki.net, hch@infradead.org, lenb@kernel.org,
	jack@suse.cz, tytso@mit.edu,
	adilger kernel <adilger.kernel@dilger.ca>,
	darrick wong <darrick.wong@oracle.com>,
	lcapitulino@redhat.com, kwolf@redhat.com, imammedo@redhat.com,
	jmoyer@redhat.com, nilal@redhat.com, riel@surriel.com,
	stefanha@redhat.com, aarcange@redhat.com, david@fromorbit.com,
	cohuck@redhat.com,
	xiaoguangrong eric <xiaoguangrong.eric@gmail.com>,
	pbonzini@redhat.com, kilobyte@angband.pl,
	yuval shaia <yuval.shaia@oracle.com>,
	jstaron@google.com
Subject: Re: [PATCH v8 2/6] virtio-pmem: Add virtio pmem driver
Date: Tue, 14 May 2019 05:27:02 -0400 (EDT)	[thread overview]
Message-ID: <752392764.28554139.1557826022323.JavaMail.zimbra@redhat.com> (raw)
In-Reply-To: <f2ea35a6-ec98-447c-44fe-0cb3ab309340@redhat.com>


Hi David,

Thank you for the review.

> On 10.05.19 17:51, Pankaj Gupta wrote:
> > This patch adds virtio-pmem driver for KVM guest.
> > 
> > Guest reads the persistent memory range information from
> > Qemu over VIRTIO and registers it on nvdimm_bus. It also
> > creates a nd_region object with the persistent memory
> > range information so that existing 'nvdimm/pmem' driver
> > can reserve this into system memory map. This way
> > 'virtio-pmem' driver uses existing functionality of pmem
> > driver to register persistent memory compatible for DAX
> > capable filesystems.
> > 
> > This also provides function to perform guest flush over
> > VIRTIO from 'pmem' driver when userspace performs flush
> > on DAX memory range.
> > 
> > Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
> > Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
> > ---
> >  drivers/nvdimm/Makefile          |   1 +
> >  drivers/nvdimm/nd_virtio.c       | 129 +++++++++++++++++++++++++++++++
> >  drivers/nvdimm/virtio_pmem.c     | 117 ++++++++++++++++++++++++++++
> >  drivers/virtio/Kconfig           |  10 +++
> >  include/linux/virtio_pmem.h      |  60 ++++++++++++++
> >  include/uapi/linux/virtio_ids.h  |   1 +
> >  include/uapi/linux/virtio_pmem.h |  10 +++
> >  7 files changed, 328 insertions(+)
> >  create mode 100644 drivers/nvdimm/nd_virtio.c
> >  create mode 100644 drivers/nvdimm/virtio_pmem.c
> >  create mode 100644 include/linux/virtio_pmem.h
> >  create mode 100644 include/uapi/linux/virtio_pmem.h
> > 
> > diff --git a/drivers/nvdimm/Makefile b/drivers/nvdimm/Makefile
> > index 6f2a088afad6..cefe233e0b52 100644
> > --- a/drivers/nvdimm/Makefile
> > +++ b/drivers/nvdimm/Makefile
> > @@ -5,6 +5,7 @@ obj-$(CONFIG_ND_BTT) += nd_btt.o
> >  obj-$(CONFIG_ND_BLK) += nd_blk.o
> >  obj-$(CONFIG_X86_PMEM_LEGACY) += nd_e820.o
> >  obj-$(CONFIG_OF_PMEM) += of_pmem.o
> > +obj-$(CONFIG_VIRTIO_PMEM) += virtio_pmem.o nd_virtio.o
> >  
> >  nd_pmem-y := pmem.o
> >  
> > diff --git a/drivers/nvdimm/nd_virtio.c b/drivers/nvdimm/nd_virtio.c
> > new file mode 100644
> > index 000000000000..ed7ddcc5a62c
> > --- /dev/null
> > +++ b/drivers/nvdimm/nd_virtio.c
> > @@ -0,0 +1,129 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * virtio_pmem.c: Virtio pmem Driver
> > + *
> > + * Discovers persistent memory range information
> > + * from host and provides a virtio based flushing
> > + * interface.
> > + */
> > +#include <linux/virtio_pmem.h>
> > +#include "nd.h"
> > +
> > + /* The interrupt handler */
> > +void host_ack(struct virtqueue *vq)
> > +{
> > +	unsigned int len;
> > +	unsigned long flags;
> > +	struct virtio_pmem_request *req, *req_buf;
> > +	struct virtio_pmem *vpmem = vq->vdev->priv;
> 
> Nit: use reverse Christmas tree layout :)

o.k

> 
> > +
> > +	spin_lock_irqsave(&vpmem->pmem_lock, flags);
> > +	while ((req = virtqueue_get_buf(vq, &len)) != NULL) {
> > +		req->done = true;
> > +		wake_up(&req->host_acked);
> > +
> > +		if (!list_empty(&vpmem->req_list)) {
> > +			req_buf = list_first_entry(&vpmem->req_list,
> > +					struct virtio_pmem_request, list);
> > +			req_buf->wq_buf_avail = true;
> > +			wake_up(&req_buf->wq_buf);
> > +			list_del(&req_buf->list);
> > +		}
> > +	}
> > +	spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
> > +}
> > +EXPORT_SYMBOL_GPL(host_ack);
> > +
> > + /* The request submission function */
> > +int virtio_pmem_flush(struct nd_region *nd_region)
> > +{
> > +	int err, err1;
> > +	unsigned long flags;
> > +	struct scatterlist *sgs[2], sg, ret;
> > +	struct virtio_device *vdev = nd_region->provider_data;
> > +	struct virtio_pmem *vpmem = vdev->priv;
> > +	struct virtio_pmem_request *req;
> 
> Nit: use reverse Christmas tree layout :)

o.k

> 
> > +
> > +	might_sleep();
> > +	req = kmalloc(sizeof(*req), GFP_KERNEL);
> > +	if (!req)
> > +		return -ENOMEM;
> > +
> > +	req->done = false;
> > +	strcpy(req->name, "FLUSH");
> > +	init_waitqueue_head(&req->host_acked);
> > +	init_waitqueue_head(&req->wq_buf);
> > +	INIT_LIST_HEAD(&req->list);
> > +	sg_init_one(&sg, req->name, strlen(req->name));
> > +	sgs[0] = &sg;
> > +	sg_init_one(&ret, &req->ret, sizeof(req->ret));
> > +	sgs[1] = &ret;
> > +
> > +	spin_lock_irqsave(&vpmem->pmem_lock, flags);
> > +	 /*
> > +	  * If virtqueue_add_sgs returns -ENOSPC then req_vq virtual
> > +	  * queue does not have free descriptor. We add the request
> > +	  * to req_list and wait for host_ack to wake us up when free
> > +	  * slots are available.
> > +	  */
> > +	while ((err = virtqueue_add_sgs(vpmem->req_vq, sgs, 1, 1, req,
> > +					GFP_ATOMIC)) == -ENOSPC) {
> > +
> > +		dev_err(&vdev->dev, "failed to send command to virtio pmem"\
> > +			"device, no free slots in the virtqueue\n");
> > +		req->wq_buf_avail = false;
> > +		list_add_tail(&req->list, &vpmem->req_list);
> > +		spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
> > +
> > +		/* When host has read buffer, this completes via host_ack */
> 
> "A host repsonse results in "host_ack" getting called" ... ?

o.k

> 
> > +		wait_event(req->wq_buf, req->wq_buf_avail);
> > +		spin_lock_irqsave(&vpmem->pmem_lock, flags);
> > +	}
> > +	err1 = virtqueue_kick(vpmem->req_vq);
> > +	spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
> > +
> > +	/*
> > +	 * virtqueue_add_sgs failed with error different than -ENOSPC, we can't
> > +	 * do anything about that.
> > +	 */
> > +	if (err || !err1) {
> > +		dev_info(&vdev->dev, "failed to send command to virtio pmem device\n");
> > +		err = -EIO;
> > +		goto ret;
> 
> Avoid the goto. Just move the following statements into an "else" case.

o.k

> 
> > +	}
> > +
> > +	/* When host has read buffer, this completes via host_ack */
> 
> "A host repsonse results in "host_ack" getting called" ... ?
> 
> > +	wait_event(req->host_acked, req->done);
> > +	err = req->ret;
> > +ret:
> > +	kfree(req);
> > +	return err;
> > +};
> > +
> > +/* The asynchronous flush callback function */
> > +int async_pmem_flush(struct nd_region *nd_region, struct bio *bio)
> > +{
> > +	int rc = 0;
> > +
> > +	/* Create child bio for asynchronous flush and chain with
> > +	 * parent bio. Otherwise directly call nd_region flush.
> > +	 */
> > +	if (bio && bio->bi_iter.bi_sector != -1) {
> > +		struct bio *child = bio_alloc(GFP_ATOMIC, 0);
> > +
> > +		if (!child)
> > +			return -ENOMEM;
> > +		bio_copy_dev(child, bio);
> > +		child->bi_opf = REQ_PREFLUSH;
> > +		child->bi_iter.bi_sector = -1;
> > +		bio_chain(child, bio);
> > +		submit_bio(child);
> 
> return 0;
> 
> Then, drop the "else" case and "int rc" and do directly
> 
> if (virtio_pmem_flush(nd_region))
> 	return -EIO;

and another 'return 0' here :)

I don't like return from multiple places instead I prefer
single exit point from function.

> 
> > +	} else {
> > +
> > +			rc = -EIO;
> > +	}
> > +
> > +	return rc;
> > +};
> > +EXPORT_SYMBOL_GPL(async_pmem_flush);
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/nvdimm/virtio_pmem.c b/drivers/nvdimm/virtio_pmem.c
> > new file mode 100644
> > index 000000000000..cfc6381c4e5d
> > --- /dev/null
> > +++ b/drivers/nvdimm/virtio_pmem.c
> > @@ -0,0 +1,117 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * virtio_pmem.c: Virtio pmem Driver
> > + *
> > + * Discovers persistent memory range information
> > + * from host and registers the virtual pmem device
> > + * with libnvdimm core.
> > + */
> > +#include <linux/virtio_pmem.h>
> > +#include "nd.h"
> > +
> > +static struct virtio_device_id id_table[] = {
> > +	{ VIRTIO_ID_PMEM, VIRTIO_DEV_ANY_ID },
> > +	{ 0 },
> > +};
> > +
> > + /* Initialize virt queue */
> > +static int init_vq(struct virtio_pmem *vpmem)
> > +{
> > +	/* single vq */
> > +	vpmem->req_vq = virtio_find_single_vq(vpmem->vdev,
> > +				host_ack, "flush_queue");
> 
> Nit: Wrong indentation of parameters.

o.k

> 
> > +	if (IS_ERR(vpmem->req_vq))
> > +		return PTR_ERR(vpmem->req_vq);
> > +
> > +	spin_lock_init(&vpmem->pmem_lock);
> > +	INIT_LIST_HEAD(&vpmem->req_list);
> 
> I would initialize the locks in the virtio_pmem_probe() directly,
> earlier (directly after allocating vpmem).

Since the lock is to protect the vq so logically I put it in 'init_vq'
which is eventually called by probe.
 
> 
> > +
> > +	return 0;
> > +};
> > +
> > +static int virtio_pmem_probe(struct virtio_device *vdev)
> > +{
> > +	int err = 0;
> > +	struct resource res;
> > +	struct virtio_pmem *vpmem;
> > +	struct nd_region_desc ndr_desc = {};
> > +	int nid = dev_to_node(&vdev->dev);
> > +	struct nd_region *nd_region;
> 
> Nit: use reverse Christmas tree layout :)

Done.

> 
> > +
> > +	if (!vdev->config->get) {
> > +		dev_err(&vdev->dev, "%s failure: config access disabled\n",
> > +			__func__);
> > +		return -EINVAL;
> > +	}
> > +
> > +	vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem), GFP_KERNEL);
> > +	if (!vpmem) {
> > +		err = -ENOMEM;
> > +		goto out_err;
> > +	}
> > +
> > +	vpmem->vdev = vdev;
> > +	vdev->priv = vpmem;
> > +	err = init_vq(vpmem);
> > +	if (err)
> > +		goto out_err;
> > +
> > +	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
> > +			start, &vpmem->start);
> > +	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
> > +			size, &vpmem->size);
> > +
> > +	res.start = vpmem->start;
> > +	res.end   = vpmem->start + vpmem->size-1;
> > +	vpmem->nd_desc.provider_name = "virtio-pmem";
> > +	vpmem->nd_desc.module = THIS_MODULE;
> > +
> > +	vpmem->nvdimm_bus = nvdimm_bus_register(&vdev->dev,
> > +						&vpmem->nd_desc);
> > +	if (!vpmem->nvdimm_bus)
> > +		goto out_vq;
> > +
> > +	dev_set_drvdata(&vdev->dev, vpmem->nvdimm_bus);
> > +
> > +	ndr_desc.res = &res;
> > +	ndr_desc.numa_node = nid;
> > +	ndr_desc.flush = async_pmem_flush;
> > +	set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
> > +	set_bit(ND_REGION_ASYNC, &ndr_desc.flags);
> > +	nd_region = nvdimm_pmem_region_create(vpmem->nvdimm_bus, &ndr_desc);
> > +
> 
> I'd drop this empty line.

hmm.

> 
> > +	if (!nd_region)
> > +		goto out_nd;
> > +	nd_region->provider_data = dev_to_virtio(nd_region->dev.parent->parent);
> 
> Does it make sense to move some parts into separate functions for
> readability? E.g., virtio_pmem_init_nvdimm_bus()

I think this function only has initialization and don't have any complex logic.

> 
> > +	return 0;
> > +out_nd:
> > +	err = -ENXIO;
> 
> I'd always initialize "err" along with the goto statement for
> readability, especially because ...
> 
> > +	nvdimm_bus_unregister(vpmem->nvdimm_bus);
> > +out_vq:
> 
> ... you don't initialize err in this case. Err is here 0 if I am not wrong.

Right. Changed.

> 
> > +	vdev->config->del_vqs(vdev);
> > +out_err:
> > +	dev_err(&vdev->dev, "failed to register virtio pmem memory\n");
> 
> Should we try to give more meaning full messages? I can think of
> scenarios like "memory region is not properly aligned" or "out of memory".

o.k

> 
> > +	return err;
> > +}
> > +
> > +static void virtio_pmem_remove(struct virtio_device *vdev)
> > +{
> > +	struct nvdimm_bus *nvdimm_bus = dev_get_drvdata(&vdev->dev);
> > +
> 
> Is the nd_region implicitly cleaned up?

yes. it will be.

> 
> You are not freeing "vdev->priv".

vdev->priv is vpmem which is allocated using devm API.
> 
> > +	nvdimm_bus_unregister(nvdimm_bus);
> > +	vdev->config->del_vqs(vdev);
> > +	vdev->config->reset(vdev);
> > +}
> > +
> > +static struct virtio_driver virtio_pmem_driver = {
> > +	.driver.name		= KBUILD_MODNAME,
> > +	.driver.owner		= THIS_MODULE,
> > +	.id_table		= id_table,
> > +	.probe			= virtio_pmem_probe,
> > +	.remove			= virtio_pmem_remove,
> > +};
> > +
> > +module_virtio_driver(virtio_pmem_driver);
> > +MODULE_DEVICE_TABLE(virtio, id_table);
> > +MODULE_DESCRIPTION("Virtio pmem driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
> > index 35897649c24f..9f634a2ed638 100644
> > --- a/drivers/virtio/Kconfig
> > +++ b/drivers/virtio/Kconfig
> > @@ -42,6 +42,16 @@ config VIRTIO_PCI_LEGACY
> >  
> >  	  If unsure, say Y.
> >  
> > +config VIRTIO_PMEM
> > +	tristate "Support for virtio pmem driver"
> > +	depends on VIRTIO
> > +	depends on LIBNVDIMM
> > +	help
> > +	This driver provides support for virtio based flushing interface
> > +	for persistent memory range.
> 
> "This driver provides access to virtio-pmem devices, storage devices
> that are mapped into the physical address space - similar to NVDIMMs -
> with a virtio-based flushing interface." ... ?

looks better. Incorporated.

Thanks,
Pankaj
> 
> > +
> > +	If unsure, say M.
> > +
> 
> 
> --
> 
> Thanks,
> 
> David / dhildenb
> 

  reply	other threads:[~2019-05-14  9:27 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-10 15:51 [PATCH v8 0/6] " Pankaj Gupta
2019-05-10 15:51 ` [PATCH v8 1/6] libnvdimm: nd_region flush callback support Pankaj Gupta
2019-05-10 15:51 ` [PATCH v8 2/6] virtio-pmem: Add virtio pmem driver Pankaj Gupta
2019-05-12 16:51   ` Michael S. Tsirkin
2019-05-13  4:43     ` [Qemu-devel] " Pankaj Gupta
2019-05-14  8:19   ` David Hildenbrand
2019-05-14  9:27     ` Pankaj Gupta [this message]
2019-05-14  9:34       ` David Hildenbrand
2019-05-14  9:47         ` Pankaj Gupta
2019-05-14  9:57           ` David Hildenbrand
2019-05-14 10:02             ` Pankaj Gupta
2019-05-10 15:51 ` [PATCH v8 3/6] libnvdimm: add dax_dev sync flag Pankaj Gupta
2019-05-10 20:14   ` Dan Williams
2019-05-11  0:45     ` Pankaj Gupta
2019-05-11  0:59       ` Dan Williams
2019-05-11  1:23         ` [Qemu-devel] " Pankaj Gupta
2019-05-13 17:32           ` Pankaj Gupta
2019-05-13 17:52             ` Dan Williams
2019-05-14  5:27               ` Pankaj Gupta
2019-05-10 15:52 ` [PATCH v8 4/6] dax: check synchronous mapping is supported Pankaj Gupta
2019-05-10 15:52 ` [PATCH v8 5/6] ext4: disable map_sync for async flush Pankaj Gupta
2019-05-10 15:52 ` [PATCH v8 6/6] xfs: " Pankaj Gupta
2019-05-10 16:30 ` [PATCH v8 0/6] virtio pmem driver Michael S. Tsirkin
2019-05-10 20:15 ` Dan Williams
2019-05-10 23:33   ` Pankaj Gupta
2019-05-12 16:52     ` Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=752392764.28554139.1557826022323.JavaMail.zimbra@redhat.com \
    --to=pagupta@redhat.com \
    --cc=aarcange@redhat.com \
    --cc=adilger.kernel@dilger.ca \
    --cc=cohuck@redhat.com \
    --cc=dan.j.williams@intel.com \
    --cc=darrick.wong@oracle.com \
    --cc=dave.jiang@intel.com \
    --cc=david@fromorbit.com \
    --cc=david@redhat.com \
    --cc=hch@infradead.org \
    --cc=imammedo@redhat.com \
    --cc=jack@suse.cz \
    --cc=jasowang@redhat.com \
    --cc=jmoyer@redhat.com \
    --cc=jstaron@google.com \
    --cc=kilobyte@angband.pl \
    --cc=kvm@vger.kernel.org \
    --cc=kwolf@redhat.com \
    --cc=lcapitulino@redhat.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvdimm@lists.01.org \
    --cc=linux-xfs@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=nilal@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=riel@surriel.com \
    --cc=rjw@rjwysocki.net \
    --cc=stefanha@redhat.com \
    --cc=tytso@mit.edu \
    --cc=virtualization@lists.linux-foundation.org \
    --cc=vishal.l.verma@intel.com \
    --cc=willy@infradead.org \
    --cc=xiaoguangrong.eric@gmail.com \
    --cc=yuval.shaia@oracle.com \
    --cc=zwisler@kernel.org \
    --subject='Re: [PATCH v8 2/6] virtio-pmem: Add virtio pmem driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).