LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* Re: Timeouts on ICH7 PATA drive with ata_piix; ide_generic works perfectly
@ 2007-02-05 18:29 Keenan Pepper
  0 siblings, 0 replies; 7+ messages in thread
From: Keenan Pepper @ 2007-02-05 18:29 UTC (permalink / raw)
  To: linux-kernel

Luming Yu wrote:
> From the dmesg, I found a problem NOT relative to the PATA driver.
> I would like to know if cpu freq driver works? If not, please enter a
> acpi bug on bugzilla.kernel.org.

The acpi-cpufreq driver does work, but there are some other
ACPI-related problems. Most importantly for me, S3 sleep does not
work, and although S1 sleep works, the Fn key combinations stop
working afterwards. Should I file a bug about this?

Keenan

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Timeouts on ICH7 PATA drive with ata_piix; ide_generic works perfectly
  2007-02-04  5:32 Keenan Pepper
                   ` (2 preceding siblings ...)
  2007-02-05  3:56 ` Luming Yu
@ 2007-02-05 23:53 ` Martin Drab
  3 siblings, 0 replies; 7+ messages in thread
From: Martin Drab @ 2007-02-05 23:53 UTC (permalink / raw)
  To: Keenan Pepper; +Cc: linux-kernel

On Sun, 4 Feb 2007, Keenan Pepper wrote:

> I just upgraded the kernel on my System76 Gazelle laptop (basically an
> ASUS Z62FP without the Microsoft tax) and the hard drive began
> freezing every few minutes. I blacklisted ata_piix and the problem
> went away, so that really narrows down where the bug has to be. Here's
> the relevant part of the dmesg:
> 
> [  924.000000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
> frozen
> [  924.000000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0
> cdb 0x25 data 8 in
> [  924.000000]          res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask
> 0x4 (timeout)
> [  931.004000] ata1: port is slow to respond, please be patient (Status 0xd0)
> [  954.028000] ata1: port failed to respond (30 secs, Status 0xd0)
> [  954.028000] ata1: soft resetting port
> [  954.380000] ata1.00: configured for UDMA/100
> [  954.560000] ata1.01: configured for UDMA/33
> [  954.560000] ata1: EH complete

This seems kind of similar to my problems with ICH7 and other SATA on the 
same comp. See <http://bugzilla.kernel.org/show_bug.cgi?id=7883>. I'm 
getting very similar messages.

Martin

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Timeouts on ICH7 PATA drive with ata_piix; ide_generic works perfectly
  2007-02-04  5:32 Keenan Pepper
  2007-02-04  6:38 ` Andrew Morton
  2007-02-04  9:53 ` Tejun Heo
@ 2007-02-05  3:56 ` Luming Yu
  2007-02-05 23:53 ` Martin Drab
  3 siblings, 0 replies; 7+ messages in thread
From: Luming Yu @ 2007-02-05  3:56 UTC (permalink / raw)
  To: Keenan Pepper; +Cc: linux-kernel

>From the dmesg, I found a problem NOT relative to the PATA driver.
I would like to know if cpu freq driver works? If not, please enter a
acpi bug on bugzilla.kernel.org.

"[   17.368000] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT,
Index (0FFFFFFFD) is beyond end of object [20060707]
[   17.368000] ACPI Error (psparse-0537): Method parse/execution
failed [\_PR_.CPU1._PSS] (Node c1468ba8), AE_AML_PACKAGE_LIMIT
[   17.368000] ACPI Exception (acpi_processor-0235):
AE_AML_PACKAGE_LIMIT, Evaluating _PSS [20060707]
[   17.368000] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT,
Index (0FFFFFFFD) is beyond end of object [20060707]
[   17.368000] ACPI Error (psparse-0537): Method parse/execution
failed [\_PR_.CPU2._PSS] (Node c14689f0), AE_AML_PACKAGE_LIMIT
[   17.368000] ACPI Exception (acpi_processor-0235):
AE_AML_PACKAGE_LIMIT, Evaluating _PSS [20060707]
"

On 2/4/07, Keenan Pepper <keenanpepper@gmail.com> wrote:
> I just upgraded the kernel on my System76 Gazelle laptop (basically an
> ASUS Z62FP without the Microsoft tax) and the hard drive began
> freezing every few minutes. I blacklisted ata_piix and the problem
> went away, so that really narrows down where the bug has to be. Here's
> the relevant part of the dmesg:
>
> [  924.000000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> [  924.000000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0
> cdb 0x25 data 8 in
> [  924.000000]          res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask
> 0x4 (timeout)
> [  931.004000] ata1: port is slow to respond, please be patient (Status 0xd0)
> [  954.028000] ata1: port failed to respond (30 secs, Status 0xd0)
> [  954.028000] ata1: soft resetting port
> [  954.380000] ata1.00: configured for UDMA/100
> [  954.560000] ata1.01: configured for UDMA/33
> [  954.560000] ata1: EH complete
>
> Complete dmesg and lspci -vvx are attached; please CC me because I'm
> not subscribed. My sincere apologies if this is already fixed in the
> main kernel.
>
> Keenan Pepper
>
>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Timeouts on ICH7 PATA drive with ata_piix; ide_generic works perfectly
  2007-02-04  9:53 ` Tejun Heo
@ 2007-02-04 10:54   ` Tejun Heo
  0 siblings, 0 replies; 7+ messages in thread
From: Tejun Heo @ 2007-02-04 10:54 UTC (permalink / raw)
  To: Keenan Pepper; +Cc: linux-kernel

Tejun Heo wrote:
> Keenan Pepper wrote:
>> I just upgraded the kernel on my System76 Gazelle laptop (basically an
>> ASUS Z62FP without the Microsoft tax) and the hard drive began
>> freezing every few minutes. I blacklisted ata_piix and the problem
>> went away, so that really narrows down where the bug has to be. Here's
>> the relevant part of the dmesg:
>>
>> [  924.000000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
>> frozen
>> [  924.000000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0
>> cdb 0x25 data 8 in
>> [  924.000000]          res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask
>> 0x4 (timeout)
>> [  931.004000] ata1: port is slow to respond, please be patient (Status
>> 0xd0)
>> [  954.028000] ata1: port failed to respond (30 secs, Status 0xd0)
> 
> It seems that something is issuing READ_CAPACITY to your drive or trying
> to open the device triggering media revalidation periodically and your
> drive doesn't like it.  Your harddisk is sharing the channel with the
> ODD so it can't be accessed till the command times out and the ODD gets
> recovered.
> 
> * Does putting in a readable CD or DVD make any difference?
> 
> * Does the problem occur in single mode where no HAL or whatever is running?
> 
> PS: It *really* helps if you include full dmesg including the detection
> messages and whole error messages when reporting bugs.  If you need
> snippet of it to explain, copy that part but keep the whole dmesg at the
> end.  Kernel developers are usually pretty good at filtering useful info
> from tons of kernel messages.

Auch, scrap the last paragraph.  You actually did.  Sorry about that.  ;-)

I see your controller is ICH7 and the errors are over ten minutes apart.
 It really seems that HAL, smartd, hddtemp or whatever is poking the dvd
writer and it isn't happy about it.  In addition to the above questions,
you can read cd/dvd's using the drive, right?

Thanks.

-- 
tejun

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Timeouts on ICH7 PATA drive with ata_piix; ide_generic works perfectly
  2007-02-04  5:32 Keenan Pepper
  2007-02-04  6:38 ` Andrew Morton
@ 2007-02-04  9:53 ` Tejun Heo
  2007-02-04 10:54   ` Tejun Heo
  2007-02-05  3:56 ` Luming Yu
  2007-02-05 23:53 ` Martin Drab
  3 siblings, 1 reply; 7+ messages in thread
From: Tejun Heo @ 2007-02-04  9:53 UTC (permalink / raw)
  To: Keenan Pepper; +Cc: linux-kernel

Keenan Pepper wrote:
> I just upgraded the kernel on my System76 Gazelle laptop (basically an
> ASUS Z62FP without the Microsoft tax) and the hard drive began
> freezing every few minutes. I blacklisted ata_piix and the problem
> went away, so that really narrows down where the bug has to be. Here's
> the relevant part of the dmesg:
> 
> [  924.000000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
> frozen
> [  924.000000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0
> cdb 0x25 data 8 in
> [  924.000000]          res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask
> 0x4 (timeout)
> [  931.004000] ata1: port is slow to respond, please be patient (Status
> 0xd0)
> [  954.028000] ata1: port failed to respond (30 secs, Status 0xd0)

It seems that something is issuing READ_CAPACITY to your drive or trying
to open the device triggering media revalidation periodically and your
drive doesn't like it.  Your harddisk is sharing the channel with the
ODD so it can't be accessed till the command times out and the ODD gets
recovered.

* Does putting in a readable CD or DVD make any difference?

* Does the problem occur in single mode where no HAL or whatever is running?

PS: It *really* helps if you include full dmesg including the detection
messages and whole error messages when reporting bugs.  If you need
snippet of it to explain, copy that part but keep the whole dmesg at the
end.  Kernel developers are usually pretty good at filtering useful info
from tons of kernel messages.

-- 
tejun

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Timeouts on ICH7 PATA drive with ata_piix; ide_generic works perfectly
  2007-02-04  5:32 Keenan Pepper
@ 2007-02-04  6:38 ` Andrew Morton
  2007-02-04  9:53 ` Tejun Heo
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 7+ messages in thread
From: Andrew Morton @ 2007-02-04  6:38 UTC (permalink / raw)
  To: Keenan Pepper; +Cc: linux-kernel, Tejun Heo, Jeff Garzik

On Sun, 4 Feb 2007 00:32:12 -0500 "Keenan Pepper" <keenanpepper@gmail.com> wrote:

> I just upgraded the kernel on my System76 Gazelle laptop (basically an
> ASUS Z62FP without the Microsoft tax) and the hard drive began
> freezing every few minutes. I blacklisted ata_piix and the problem
> went away, so that really narrows down where the bug has to be. Here's
> the relevant part of the dmesg:
> 
> [  924.000000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> [  924.000000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0
> cdb 0x25 data 8 in
> [  924.000000]          res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask
> 0x4 (timeout)
> [  931.004000] ata1: port is slow to respond, please be patient (Status 0xd0)
> [  954.028000] ata1: port failed to respond (30 secs, Status 0xd0)
> [  954.028000] ata1: soft resetting port
> [  954.380000] ata1.00: configured for UDMA/100
> [  954.560000] ata1.01: configured for UDMA/33
> [  954.560000] ata1: EH complete

>From what version of the kernel did you upgrade?

It is very helpful for us to knwo the latest version which worked OK.

> Complete dmesg and lspci -vvx are attached; please CC me because I'm
> not subscribed. My sincere apologies if this is already fixed in the
> main kernel.

You're running 2.6.20-rc6.  This won't have been fixed.

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Timeouts on ICH7 PATA drive with ata_piix; ide_generic works perfectly
@ 2007-02-04  5:32 Keenan Pepper
  2007-02-04  6:38 ` Andrew Morton
                   ` (3 more replies)
  0 siblings, 4 replies; 7+ messages in thread
From: Keenan Pepper @ 2007-02-04  5:32 UTC (permalink / raw)
  To: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 1039 bytes --]

I just upgraded the kernel on my System76 Gazelle laptop (basically an
ASUS Z62FP without the Microsoft tax) and the hard drive began
freezing every few minutes. I blacklisted ata_piix and the problem
went away, so that really narrows down where the bug has to be. Here's
the relevant part of the dmesg:

[  924.000000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[  924.000000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0
cdb 0x25 data 8 in
[  924.000000]          res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask
0x4 (timeout)
[  931.004000] ata1: port is slow to respond, please be patient (Status 0xd0)
[  954.028000] ata1: port failed to respond (30 secs, Status 0xd0)
[  954.028000] ata1: soft resetting port
[  954.380000] ata1.00: configured for UDMA/100
[  954.560000] ata1.01: configured for UDMA/33
[  954.560000] ata1: EH complete

Complete dmesg and lspci -vvx are attached; please CC me because I'm
not subscribed. My sincere apologies if this is already fixed in the
main kernel.

Keenan Pepper

[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 29920 bytes --]

[    0.000000] Linux version 2.6.20-6-generic (root@palmer) (gcc version 4.1.2 20070106 (prerelease) (Ubuntu 4.1.1-21ubuntu7)) #2 SMP Wed Jan 31 20:53:39 UTC 2007 (Ubuntu 2.6.20-6.11-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000001f6c0000 end: 000000001f7c0000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000001f7c0000 size: 000000000000e000 end: 000000001f7ce000 type: 3
[    0.000000] copy_e820_map() start: 000000001f7ce000 size: 0000000000032000 end: 000000001f800000 type: 4
[    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[    0.000000] copy_e820_map() start: 00000000ffb80000 size: 0000000000480000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001f7c0000 (usable)
[    0.000000]  BIOS-e820: 000000001f7c0000 - 000000001f7ce000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001f7ce000 - 000000001f800000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 503MB LOWMEM available.
[    0.000000] found SMP MP-table at 000ff780
[    0.000000] Entering add_active_range(0, 0, 128960) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   128960
[    0.000000]   HighMem    128960 ->   128960
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   128960
[    0.000000] On node 0 totalpages: 128960
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 975 pages used for memmap
[    0.000000]   Normal zone: 123889 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f7a20
[    0.000000] ACPI: RSDT (v001 A.M.I. OEMRSDT  0x10000623 MSFT 0x00000097) @ 0x1f7c0000
[    0.000000] ACPI: FADT (v002 A.M.I. OEMFACP  0x10000623 MSFT 0x00000097) @ 0x1f7c0200
[    0.000000] ACPI: MADT (v001 A.M.I. OEMAPIC  0x10000623 MSFT 0x00000097) @ 0x1f7c0390
[    0.000000] ACPI: MCFG (v001 A.M.I. OEMMCFG  0x10000623 MSFT 0x00000097) @ 0x1f7c03f0
[    0.000000] ACPI: BOOT (v001 A.M.I. OEMBOOT  0x10000623 MSFT 0x00000097) @ 0x1f7c0430
[    0.000000] ACPI: OEMB (v001 A.M.I. AMI_OEM  0x10000623 MSFT 0x00000097) @ 0x1f7ce040
[    0.000000] ACPI: TCPA (v001 A.M.I. TBLOEMID 0x00000001 MSFT 0x00000097) @ 0x1f7c8130
[    0.000000]   >>> ERROR: Invalid checksum
[    0.000000] ACPI: DSDT (v001  Z62FP Z62FP101 0x00000101 INTL 0x02002026) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:15 APIC version 20
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 1f800000:df600000)
[    0.000000] Detected 1662.672 MHz processor.
[   32.802714] Built 1 zonelists.  Total pages: 127953
[   32.802718] Kernel command line: root=UUID=24fe414d-3087-4e5e-a458-33e4606edc52 ro pci=assign-busses quiet splash
[   32.802871] mapped APIC to ffffd000 (fee00000)
[   32.802873] mapped IOAPIC to ffffc000 (fec00000)
[   32.802876] Enabling fast FPU save and restore... done.
[   32.802879] Enabling unmasked SIMD FPU exception support... done.
[   32.802886] Initializing CPU#0
[   32.802957] PID hash table entries: 2048 (order: 11, 8192 bytes)
[   32.804604] Console: colour VGA+ 80x25
[   32.804750] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   32.804902] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   32.814989] Memory: 500708k/515840k available (1975k kernel code, 14508k reserved, 878k data, 324k init, 0k highmem)
[   32.814998] virtual kernel memory layout:
[   32.814999]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   32.815000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   32.815001]     vmalloc : 0xe0000000 - 0xff7fe000   ( 503 MB)
[   32.815002]     lowmem  : 0xc0000000 - 0xdf7c0000   ( 503 MB)
[   32.815003]       .init : 0xc03cf000 - 0xc0420000   ( 324 kB)
[   32.815004]       .data : 0xc02edd14 - 0xc03c96d4   ( 878 kB)
[   32.815005]       .text : 0xc0100000 - 0xc02edd14   (1975 kB)
[   32.815008] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   32.894831] Calibrating delay using timer specific routine.. 3328.98 BogoMIPS (lpj=6657971)
[   32.894866] Security Framework v1.0.0 initialized
[   32.894871] SELinux:  Disabled at boot.
[   32.894885] Mount-cache hash table entries: 512
[   32.895002] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001
[   32.895010] monitor/mwait feature present.
[   32.895011] using mwait in idle threads.
[   32.895015] CPU: L1 I cache: 32K, L1 D cache: 32K
[   32.895017] CPU: L2 cache: 2048K
[   32.895020] CPU: Physical Processor ID: 0
[   32.895021] CPU: Processor Core ID: 0
[   32.895023] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001
[   32.895041] Checking 'hlt' instruction... OK.
[   32.910894] SMP alternatives: switching to UP code
[   32.911120] ACPI: Core revision 20060707
[   32.927390] CPU0: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
[   32.927408] SMP alternatives: switching to SMP code
[   32.927426] Booting processor 1/1 eip 3000
[   32.937821] Initializing CPU#1
[   33.014652] Calibrating delay using timer specific routine.. 3325.25 BogoMIPS (lpj=6650502)
[   33.014659] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001
[   33.014663] monitor/mwait feature present.
[   33.014666] CPU: L1 I cache: 32K, L1 D cache: 32K
[   33.014668] CPU: L2 cache: 2048K
[   33.014671] CPU: Physical Processor ID: 0
[   33.014673] CPU: Processor Core ID: 1
[   33.014674] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001
[   33.015167] CPU1: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
[   33.015191] Total of 2 processors activated (6654.23 BogoMIPS).
[   33.015386] ENABLING IO-APIC IRQs
[   33.015582] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   33.162445] checking TSC synchronization across 2 CPUs: passed.
[    0.003995] Brought up 2 CPUs
[    0.089329] migration_cost=701
[    0.089594] Booting paravirtualized kernel on bare hardware
[    0.089660] NET: Registered protocol family 16
[    0.089742] EISA bus registered
[    0.089746] ACPI: bus type pci registered
[    0.089755] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[    0.089812] PCI: Not using MMCONFIG.
[    0.090042] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[    0.090044] PCI: Using configuration type 1
[    0.090046] Setting up standard PCI resources
[    0.098489] APIC error on CPU1: 00(40)
[    0.157607] ACPI: Interpreter enabled
[    0.157609] ACPI: Using IOAPIC for interrupt routing
[    0.158772] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.158780] PCI: Probing PCI hardware (bus 00)
[    0.159113] Boot video device is 0000:00:02.0
[    0.159758] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.159762] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.160845] PCI: Transparent bridge - 0000:00:1e.0
[    0.160932] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.182278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[    0.183149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.183504] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.184850] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[    0.185176] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 12)
[    0.185497] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 12)
[    0.185819] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 12)
[    0.186140] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[    0.186463] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
[    0.186784] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
[    0.187106] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 12)
[    0.187484] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.187494] pnp: PnP ACPI init
[    0.190620] pnp: PnP ACPI: found 14 devices
[    0.190624] PnPBIOS: Disabled by ACPI PNP
[    0.190663] PCI: Using ACPI for IRQ routing
[    0.190665] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.214971] pnp: 00:09: ioport range 0xa00-0xa0f has been reserved
[    0.214978] pnp: 00:0b: ioport range 0x250-0x25f has been reserved
[    0.215241] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[    0.215244] PCI: Bridge: 0000:00:1c.0
[    0.215246]   IO window: disabled.
[    0.215251]   MEM window: disabled.
[    0.215256]   PREFETCH window: disabled.
[    0.215261] PCI: Bridge: 0000:00:1c.1
[    0.215263]   IO window: disabled.
[    0.215269]   MEM window: fdf00000-fdffffff
[    0.215273]   PREFETCH window: disabled.
[    0.215287] PCI: Bus 4, cardbus bridge: 0000:03:01.0
[    0.215288]   IO window: 0000c000-0000c0ff
[    0.215293]   IO window: 0000c400-0000c4ff
[    0.215298]   PREFETCH window: 20000000-23ffffff
[    0.215303]   MEM window: 24000000-27ffffff
[    0.215307] PCI: Bridge: 0000:00:1e.0
[    0.215310]   IO window: c000-dfff
[    0.215317]   MEM window: fe000000-fe8fffff
[    0.215322]   PREFETCH window: bdf00000-bfefffff
[    0.215351] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.215358] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.215382] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[    0.215388] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.215402] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.215417] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 17 (level, low) -> IRQ 17
[    0.215446] NET: Registered protocol family 2
[    0.255661] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.255733] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.255792] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.255820] TCP: Hash tables configured (established 16384 bind 8192)
[    0.255824] TCP reno registered
[    0.267710] checking if image is initramfs... it is
[    0.853501] Freeing initrd memory: 6387k freed
[    0.853701] Simple Boot Flag at 0x52 set to 0x1
[    0.854159] audit: initializing netlink socket (disabled)
[    0.854176] audit(1170563922.232:1): initialized
[    0.854351] VFS: Disk quotas dquot_6.5.1
[    0.854375] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.854427] io scheduler noop registered
[    0.854429] io scheduler anticipatory registered
[    0.854432] io scheduler deadline registered
[    0.854443] io scheduler cfq registered (default)
[    0.854686] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.854756] assign_interrupt_mode Found MSI capability
[    0.854813] Allocate Port Service[0000:00:1c.0:pcie00]
[    0.854847] Allocate Port Service[0000:00:1c.0:pcie02]
[    0.854984] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.855043] assign_interrupt_mode Found MSI capability
[    0.855087] Allocate Port Service[0000:00:1c.1:pcie00]
[    0.855120] Allocate Port Service[0000:00:1c.1:pcie02]
[    0.855305] isapnp: Scanning for PnP cards...
[    1.208754] isapnp: No Plug & Play device found
[    1.229468] Real Time Clock Driver v1.12ac
[    1.229529] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.230224] mice: PS/2 mouse device common for all mice
[    1.230754] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    1.230927] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    1.230931] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    1.231219] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.234728] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.235679] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.235682] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.235684] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.235687] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.235689] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.235799] EISA: Probing bus 0 at eisa.0
[    1.235838] EISA: Detected 0 cards.
[    1.265978] TCP cubic registered
[    1.265987] NET: Registered protocol family 1
[    1.265992] NET: Registered protocol family 8
[    1.265994] NET: Registered protocol family 20
[    1.266029] Starting balanced_irq
[    1.266036] Using IPI No-Shortcut mode
[    1.266125] Time: tsc clocksource has been installed.
[    1.266193] ACPI: (supports S0 S1 S3 S4 S5)
[    1.266417] Freeing unused kernel memory: 324k freed
[    1.270431] input: AT Translated Set 2 keyboard as /class/input/input0
[    2.445943] Capability LSM initialized
[    2.474435] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU1PM] [20060707]
[    2.474709] ACPI: CPU0 (power states: C1[C1] C2[C2])
[    2.474714] ACPI: Processor [CPU1] (supports 8 throttling states)
[    2.475127] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU2PM] [20060707]
[    2.475374] ACPI: CPU1 (power states: C1[C1] C2[C2])
[    2.475379] ACPI: Processor [CPU2] (supports 8 throttling states)
[    2.676000] ACPI: Thermal Zone [THRM] (56 C)
[    2.684000] Time: acpi_pm clocksource has been installed.
[    2.976000] usbcore: registered new interface driver usbfs
[    2.976000] usbcore: registered new interface driver hub
[    3.008000] usbcore: registered new device driver usb
[    3.008000] SCSI subsystem initialized
[    3.016000] libata version 2.00 loaded.
[    3.020000] ata_piix 0000:00:1f.1: version 2.00ac7
[    3.020000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[    3.020000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    3.020000] ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14
[    3.020000] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15
[    3.020000] scsi0 : ata_piix
[    3.044000] USB Universal Host Controller Interface driver v3.0
[    3.112000] ieee1394: Initialized config rom entry `ip1394'
[    3.184000] ata1.00: ATA-6, max UDMA/100, 78140160 sectors: LBA48 
[    3.184000] ata1.00: ata1: dev 0 multi count 16
[    3.364000] ata1.01: ATAPI, max UDMA/33
[    3.372000] ata1.00: configured for UDMA/100
[    3.552000] ata1.01: configured for UDMA/33
[    3.552000] scsi1 : ata_piix
[    3.556000] ata2: port disabled. ignoring.
[    3.556000] scsi 0:0:0:0: Direct-Access     ATA      HTS541040G9AT00  MB2O PQ: 0 ANSI: 5
[    3.568000] scsi 0:0:1:0: CD-ROM            TSSTcorp CD/DVDW TS-L632D AS05 PQ: 0 ANSI: 5
[    3.568000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[    3.568000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    3.568000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.568000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    3.568000] ehci_hcd 0000:00:1d.7: debug port 1
[    3.568000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    3.568000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfeb3bc00
[    3.572000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.572000] usb usb1: configuration #1 chosen from 1 choice
[    3.572000] hub 1-0:1.0: USB hub found
[    3.572000] hub 1-0:1.0: 8 ports detected
[    3.676000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[    3.676000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    3.676000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.676000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.676000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e880
[    3.676000] usb usb2: configuration #1 chosen from 1 choice
[    3.676000] hub 2-0:1.0: USB hub found
[    3.676000] hub 2-0:1.0: 2 ports detected
[    3.780000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[    3.780000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.780000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.780000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    3.780000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000e800
[    3.780000] usb usb3: configuration #1 chosen from 1 choice
[    3.780000] hub 3-0:1.0: USB hub found
[    3.780000] hub 3-0:1.0: 2 ports detected
[    3.884000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    3.884000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    3.884000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.884000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    3.884000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e480
[    3.884000] usb usb4: configuration #1 chosen from 1 choice
[    3.884000] hub 4-0:1.0: USB hub found
[    3.884000] hub 4-0:1.0: 2 ports detected
[    3.988000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[    3.988000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    3.988000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.988000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    3.988000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400
[    3.988000] usb usb5: configuration #1 chosen from 1 choice
[    3.988000] hub 5-0:1.0: USB hub found
[    3.988000] hub 5-0:1.0: 2 ports detected
[    4.092000] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 18
[    4.148000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18]  MMIO=[fe8ff800-fe8fffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    4.152000] r8169 Gigabit Ethernet driver 2.2LK loaded
[    4.152000] ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 16 (level, low) -> IRQ 16
[    4.152000] eth0: RTL8169sb/8110sb at 0xe011ac00, 00:18:f3:e6:e4:f8, IRQ 16
[    4.164000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[    4.164000] sda: Write Protect is off
[    4.164000] sda: Mode Sense: 00 3a 00 00
[    4.164000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.164000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[    4.164000] sda: Write Protect is off
[    4.164000] sda: Mode Sense: 00 3a 00 00
[    4.164000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.164000]  sda: sda1 sda2 sda3
[    4.188000] sd 0:0:0:0: Attached scsi disk sda
[    4.192000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.192000] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    4.328000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.328000] Uniform CD-ROM driver Revision: 3.20
[    4.328000] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    4.696000] Attempting manual resume
[    4.704000] ReiserFS: sda2: found reiserfs format "3.6" with standard journal
[    4.704000] ReiserFS: sda2: using ordered data mode
[    4.720000] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    4.720000] ReiserFS: sda2: checking transaction log (sda2)
[    4.784000] ReiserFS: sda2: Using r5 hash to sort names
[    5.428000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e018000377ebdf]
[   15.740000] Linux agpgart interface v0.101 (c) Dave Jones
[   15.744000] agpgart: Detected an Intel 945GM Chipset.
[   15.744000] agpgart: Detected 7932K stolen memory.
[   15.764000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   15.876000] agpgart: AGP aperture is 256M @ 0xd0000000
[   15.876000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.884000] intel_rng: FWH not detected
[   15.936000] pnp: Device 00:08 disabled.
[   15.936000] parport_pc: probe of 00:08 failed with error -22
[   16.056000] input: PC Speaker as /class/input/input1
[   16.160000] iTCO_vendor_support: vendor-support=0
[   16.212000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[   16.216000] Yenta: CardBus bridge found at 0000:03:01.0 [1043:1297]
[   16.252000] sdhci: Secure Digital Host Controller Interface driver, 0.12
[   16.252000] sdhci: Copyright(c) Pierre Ossman
[   16.264000] ieee80211_crypt: registered algorithm 'NULL'
[   16.344000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 17
[   16.344000] Socket status: 30000006
[   16.344000] pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff
[   16.344000] cs: IO port probe 0xc000-0xdfff: clean.
[   16.344000] pcmcia: parent PCI bridge Memory window: 0xfe000000 - 0xfe8fffff
[   16.344000] pcmcia: parent PCI bridge Memory window: 0xbdf00000 - 0xbfefffff
[   16.344000] sdhci: SDHCI controller found at 0000:03:01.2 [1180:0822] (rev 17)
[   16.344000] ACPI: PCI Interrupt 0000:03:01.2[C] -> GSI 19 (level, low) -> IRQ 20
[   16.344000] sdhci:slot0: Controller reports > 25 MHz base clock, but no high speed support.
[   16.344000] mmc0: SDHCI at 0xfe8ff400 irq 20 DMA
[   16.440000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   16.440000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   16.552000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.1.3mp
[   16.552000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[   16.552000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   16.552000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   16.552000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   16.668000] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[   16.712000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[   16.716000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
[   16.716000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   16.808000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[   16.808000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   16.844000] cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
[   16.844000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   16.844000] cs: IO port probe 0x820-0x8ff: clean.
[   16.844000] cs: IO port probe 0xc00-0xcf7: clean.
[   16.844000] cs: IO port probe 0xa00-0xaff: clean.
[   17.368000] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFD) is beyond end of object [20060707]
[   17.368000] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PSS] (Node c1468ba8), AE_AML_PACKAGE_LIMIT
[   17.368000] ACPI Exception (acpi_processor-0235): AE_AML_PACKAGE_LIMIT, Evaluating _PSS [20060707]
[   17.368000] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFD) is beyond end of object [20060707]
[   17.368000] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PSS] (Node c14689f0), AE_AML_PACKAGE_LIMIT
[   17.368000] ACPI Exception (acpi_processor-0235): AE_AML_PACKAGE_LIMIT, Evaluating _PSS [20060707]
[   17.464000] Adding 1052216k swap on /dev/disk/by-uuid/b105993d-2956-48a3-85c8-15201b7a211c.  Priority:-1 extents:1 across:1052216k
[   18.456000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
[   32.668000] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
[   32.668000] ReiserFS: sda3: using ordered data mode
[   32.688000] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   32.688000] ReiserFS: sda3: checking transaction log (sda3)
[   32.700000] ReiserFS: sda3: Using r5 hash to sort names
[   34.056000] NET: Registered protocol family 17
[   36.688000] Using specific hotkey driver
[   36.764000] Asus Laptop ACPI Extras version 0.30
[   36.764000]   unsupported model Z62FP, trying default values
[   36.764000]   send /proc/acpi/dsdt to the developers
[   36.784000] ACPI: AC Adapter [AC0] (on-line)
[   36.796000] No dock devices found.
[   36.848000] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[   36.856000] input: Power Button (FF) as /class/input/input3
[   36.856000] ACPI: Power Button (FF) [PWRF]
[   36.856000] input: Lid Switch as /class/input/input4
[   36.856000] ACPI: Lid Switch [LID]
[   36.880000] input: Power Button (CM) as /class/input/input5
[   36.880000] ACPI: Power Button (CM) [PWRB]
[   36.896000] input: Sleep Button (CM) as /class/input/input6
[   36.896000] ACPI: Sleep Button (CM) [SLPB]
[   36.984000] ibm_acpi: ec object not found
[   37.040000] ACPI: Battery Slot [BAT0] (battery present)
[   37.048000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   38.248000] lp: driver loaded but no devices found
[   38.340000] ppdev: user-space parallel port driver
[   38.572000] [drm] Initialized drm 1.1.0 20060810
[   38.576000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[   38.576000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   40.048000] apm: BIOS not found.
[   43.148000] r8169: eth0: link down
[   43.228000] NET: Registered protocol family 10
[   43.228000] lo: Disabled Privacy Extensions
[   43.228000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   43.228000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   43.532000] Bluetooth: Core ver 2.11
[   43.532000] NET: Registered protocol family 31
[   43.532000] Bluetooth: HCI device and connection manager initialized
[   43.532000] Bluetooth: HCI socket layer initialized
[   43.556000] Bluetooth: L2CAP ver 2.8
[   43.556000] Bluetooth: L2CAP socket layer initialized
[   43.716000] Bluetooth: RFCOMM socket layer initialized
[   43.716000] Bluetooth: RFCOMM TTY layer initialized
[   43.716000] Bluetooth: RFCOMM ver 1.8
[   56.136000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   71.208000] eth1: no IPv6 routers present
[  924.000000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[  924.000000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in
[  924.000000]          res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
[  931.004000] ata1: port is slow to respond, please be patient (Status 0xd0)
[  954.028000] ata1: port failed to respond (30 secs, Status 0xd0)
[  954.028000] ata1: soft resetting port
[  954.380000] ata1.00: configured for UDMA/100
[  954.560000] ata1.01: configured for UDMA/33
[  954.560000] ata1: EH complete
[  954.576000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[  954.592000] sda: Write Protect is off
[  954.592000] sda: Mode Sense: 00 3a 00 00
[  954.616000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  955.008000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[  955.040000] sda: Write Protect is off
[  955.040000] sda: Mode Sense: 00 3a 00 00
[  955.040000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1702.632000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 1702.632000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in
[ 1702.632000]          res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
[ 1709.636000] ata1: port is slow to respond, please be patient (Status 0xd0)
[ 1732.652000] ata1: port failed to respond (30 secs, Status 0xd0)
[ 1732.652000] ata1: soft resetting port
[ 1733.004000] ata1.00: configured for UDMA/100
[ 1733.184000] ata1.01: configured for UDMA/33
[ 1733.184000] ata1: EH complete
[ 1733.200000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[ 1733.216000] sda: Write Protect is off
[ 1733.216000] sda: Mode Sense: 00 3a 00 00
[ 1733.248000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1733.604000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[ 1733.608000] sda: Write Protect is off
[ 1733.608000] sda: Mode Sense: 00 3a 00 00
[ 1733.612000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[-- Attachment #3: lspci --]
[-- Type: application/octet-stream, Size: 15634 bytes --]

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
	Subsystem: ASUSTeK Computer Inc. Unknown device 1297
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Capabilities: <access denied>
00: 86 80 a0 27 06 00 90 20 03 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 97 12
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00

00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA])
	Subsystem: ASUSTeK Computer Inc. Unknown device 1252
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
	Region 1: I/O ports at ec00 [size=8]
	Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 3: Memory at feb40000 (32-bit, non-prefetchable) [size=256K]
	Capabilities: <access denied>
00: 86 80 a2 27 07 00 90 00 03 00 00 03 00 00 80 00
10: 00 00 b8 fe 01 ec 00 00 08 00 00 d0 00 00 b4 fe
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 52 12
30: 00 00 00 00 90 00 00 00 00 00 00 00 0b 01 00 00

00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
	Subsystem: ASUSTeK Computer Inc. Unknown device 1252
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Region 0: Memory at fea80000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: <access denied>
00: 86 80 a6 27 07 00 90 00 03 00 80 03 00 00 80 00
10: 00 00 a8 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 52 12
30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
	Subsystem: ASUSTeK Computer Inc. Unknown device 1297
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at feb3c000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
00: 86 80 d8 27 06 00 10 00 02 00 03 04 08 00 00 00
10: 04 c0 b3 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 97 12
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: <access denied>
00: 86 80 d0 27 04 05 10 00 02 00 04 06 08 00 81 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 20
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 06 00

00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Memory behind bridge: fdf00000-fdffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: <access denied>
00: 86 80 d2 27 06 05 10 00 02 00 04 06 08 00 81 00
10: 00 00 00 00 00 00 00 00 00 02 02 00 f0 00 00 20
20: f0 fd f0 fd f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 05 02 06 00

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Unknown device 1297
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 18
	Region 4: I/O ports at e880 [size=32]
00: 86 80 c8 27 05 00 80 02 02 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 e8 00 00 00 00 00 00 00 00 00 00 43 10 97 12
30: 00 00 00 00 00 00 00 00 00 00 00 00 03 01 00 00

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Unknown device 1297
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at e800 [size=32]
00: 86 80 c9 27 05 00 80 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e8 00 00 00 00 00 00 00 00 00 00 43 10 97 12
30: 00 00 00 00 00 00 00 00 00 00 00 00 04 02 00 00

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Unknown device 1297
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin C routed to IRQ 20
	Region 4: I/O ports at e480 [size=32]
00: 86 80 ca 27 05 00 80 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 e4 00 00 00 00 00 00 00 00 00 00 43 10 97 12
30: 00 00 00 00 00 00 00 00 00 00 00 00 06 03 00 00

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Unknown device 1297
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin D routed to IRQ 16
	Region 4: I/O ports at e400 [size=32]
00: 86 80 cb 27 05 00 80 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e4 00 00 00 00 00 00 00 00 00 00 43 10 97 12
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Unknown device 1297
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at feb3bc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
00: 86 80 cc 27 06 01 90 02 02 20 03 0c 00 00 00 00
10: 00 bc b3 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 97 12
30: 00 00 00 00 50 00 00 00 00 00 00 00 03 01 00 00

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
	I/O behind bridge: 0000c000-0000dfff
	Memory behind bridge: fe000000-fe8fffff
	Prefetchable memory behind bridge: 00000000bdf00000-00000000bfefffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: <access denied>
00: 86 80 48 24 07 01 10 00 e2 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 03 07 20 c0 d0 80 22
20: 00 fe 80 fe f1 bd e1 bf 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 06 00

00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
	Subsystem: ASUSTeK Computer Inc. Unknown device 1297
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Capabilities: <access denied>
00: 86 80 b9 27 07 00 10 02 02 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 97 12
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00

00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
	Subsystem: ASUSTeK Computer Inc. Unknown device 1297
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at ffa0 [size=16]
00: 86 80 df 27 05 00 88 02 02 8a 01 01 00 00 00 00
10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
20: a1 ff 00 00 00 00 00 00 00 00 00 00 43 10 97 12
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00

00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
	Subsystem: ASUSTeK Computer Inc. Unknown device 1297
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 5
	Region 4: I/O ports at 0400 [size=32]
00: 86 80 da 27 01 00 80 02 02 00 05 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 04 00 00 00 00 00 00 00 00 00 00 43 10 97 12
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00

02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
	Subsystem: Intel Corporation Unknown device 1000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
00: 86 80 22 42 06 00 10 00 02 00 80 02 08 00 00 00
10: 00 f0 ff fd 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 00 10
30: 00 00 00 00 c8 00 00 00 00 00 00 00 05 01 00 00

03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
	Subsystem: ASUSTeK Computer Inc. Unknown device 1297
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fe000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
	Memory window 0: 20000000-23fff000 (prefetchable)
	Memory window 1: 24000000-27fff000
	I/O window 0: 0000c000-0000c0ff
	I/O window 1: 0000c400-0000c4ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
00: 80 11 76 04 07 00 10 02 b3 00 07 06 00 a8 82 00
10: 00 00 00 fe dc 00 00 02 03 04 07 b0 00 00 00 20
20: 00 f0 ff 23 00 00 00 24 00 f0 ff 27 00 c0 00 00
30: fc c0 00 00 00 c4 00 00 fc c4 00 00 05 01 80 05
40: 43 10 97 12 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08) (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Unknown device 1297
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (500ns min, 1000ns max)
	Interrupt: pin B routed to IRQ 20
	Region 0: Memory at fe8ff800 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
00: 80 11 52 05 06 00 10 02 08 10 00 0c 00 40 80 00
10: 00 f8 8f fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 97 12
30: 00 00 00 00 dc 00 00 00 00 00 00 00 06 02 02 04

03:01.2 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
	Subsystem: ASUSTeK Computer Inc. Unknown device 1297
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Interrupt: pin C routed to IRQ 19
	Region 0: Memory at fe8ff400 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
00: 80 11 22 08 06 00 10 02 17 00 05 08 00 40 80 00
10: 00 f4 8f fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 97 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 04 03 00 00

03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)
	Subsystem: ASUSTeK Computer Inc. Unknown device 1297
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin C routed to IRQ 4
	Region 0: Memory at fe8ff000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
00: 80 11 92 05 02 00 10 02 08 00 80 08 00 00 80 00
10: 00 f0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 97 12
30: 00 00 00 00 80 00 00 00 00 00 00 00 04 03 00 00

03:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
	Subsystem: ASUSTeK Computer Inc. Unknown device 11e5
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at d800 [size=256]
	Region 1: Memory at fe8fec00 (32-bit, non-prefetchable) [size=256]
	Expansion ROM at bdf00000 [disabled] [size=128K]
	Capabilities: <access denied>
00: ec 10 69 81 17 00 b0 02 10 00 00 02 08 40 00 00
10: 01 d8 00 00 00 ec 8f fe 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 e5 11
30: 00 00 8c fe dc 00 00 00 00 00 00 00 0b 01 20 40


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2007-02-05 23:53 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-02-05 18:29 Timeouts on ICH7 PATA drive with ata_piix; ide_generic works perfectly Keenan Pepper
  -- strict thread matches above, loose matches on Subject: below --
2007-02-04  5:32 Keenan Pepper
2007-02-04  6:38 ` Andrew Morton
2007-02-04  9:53 ` Tejun Heo
2007-02-04 10:54   ` Tejun Heo
2007-02-05  3:56 ` Luming Yu
2007-02-05 23:53 ` Martin Drab

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).