[PATCH v2 1/3] dt-bindings: watchdog: sunxi: Add compatible for R329

[PATCH v2 1/3] dt-bindings: watchdog: sunxi: Add compatible for R329

[Samuel Holland]

On existing SoCs, the watchdog has a single clock input: HOSC (OSC24M)
divided by 750.  However, starting with R329, LOSC (OSC32k) is added as
an alternative clock source, with a bit to switch between them.

Since 24 MHz / 750 == 32 kHz, not 32.768 kHz, the hardware adjusts the
cycle counts to keep the timeouts independent of the clock source. This
keeps the programming interface backward-compatible.

R329 also adds two new registers, to allow software to immediately drive
the SoC reset signal.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---
Changes v1 to v2:
 - Switch from enum to const
 - Add descriptions to "clocks" items

 .../watchdog/allwinner,sun4i-a10-wdt.yaml     | 32 ++++++++++++++++++-
 1 file changed, 31 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
index 9aa3c313c49f..8fa5b0d32381 100644
--- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
@@ -24,6 +24,7 @@ properties:
               - allwinner,sun50i-a100-wdt
               - allwinner,sun50i-h6-wdt
               - allwinner,sun50i-h616-wdt
+              - allwinner,sun50i-r329-wdt
           - const: allwinner,sun6i-a31-wdt
       - items:
           - const: allwinner,suniv-f1c100s-wdt
@@ -33,7 +34,18 @@ properties:
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: High-frequency oscillator input, divided internally
+      - description: Low-frequency oscillator input, only found on some variants
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: hosc
+      - const: losc
 
   interrupts:
     maxItems: 1
@@ -44,6 +56,24 @@ required:
   - clocks
   - interrupts
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun50i-r329-wdt
+
+then:
+  properties:
+    clocks:
+      minItems: 2
+
+    clock-names:
+      minItems: 2
+
+  required:
+    - clock-names
+
 unevaluatedProperties: false
 
 examples:
-- 
2.31.1

[PATCH v2 2/3] dt-bindings: watchdog: sunxi: Add compatible for D1

[Samuel Holland]

D1 keeps the same register layout and clock sources as the R329, but it
adds a key field which must be set to update the watchdog's "CFG" and
"MODE" registers. Therefore it is not backward-compatible.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
Changes v1 to v2:
 - None.

 .../devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml   | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
index 8fa5b0d32381..6ef5e7caae80 100644
--- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
@@ -29,6 +29,7 @@ properties:
       - items:
           - const: allwinner,suniv-f1c100s-wdt
           - const: allwinner,sun4i-a10-wdt
+      - const: allwinner,sun20i-d1-wdt
 
   reg:
     maxItems: 1
@@ -61,6 +62,7 @@ if:
     compatible:
       contains:
         enum:
+          - allwinner,sun20i-d1-wdt
           - allwinner,sun50i-r329-wdt
 
 then:
-- 
2.31.1

[PATCH v2 3/3] watchdog: sunxi_wdt: Add support for D1

[Samuel Holland]

D1 adds a key field to the "CFG" and "MODE" registers, that must be set
to change the other bits. Add logic to set the key when updating those
registers.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
Changes v1 to v2:
 - None.

 drivers/watchdog/sunxi_wdt.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/sunxi_wdt.c b/drivers/watchdog/sunxi_wdt.c
index b50757882a98..6cf82922d3fb 100644
--- a/drivers/watchdog/sunxi_wdt.c
+++ b/drivers/watchdog/sunxi_wdt.c
@@ -48,6 +48,7 @@ struct sunxi_wdt_reg {
 	u8 wdt_timeout_shift;
 	u8 wdt_reset_mask;
 	u8 wdt_reset_val;
+	u32 wdt_key_val;
 };
 
 struct sunxi_wdt_dev {
@@ -91,12 +92,14 @@ static int sunxi_wdt_restart(struct watchdog_device *wdt_dev,
 	val = readl(wdt_base + regs->wdt_cfg);
 	val &= ~(regs->wdt_reset_mask);
 	val |= regs->wdt_reset_val;
+	val |= regs->wdt_key_val;
 	writel(val, wdt_base + regs->wdt_cfg);
 
 	/* Set lowest timeout and enable watchdog */
 	val = readl(wdt_base + regs->wdt_mode);
 	val &= ~(WDT_TIMEOUT_MASK << regs->wdt_timeout_shift);
 	val |= WDT_MODE_EN;
+	val |= regs->wdt_key_val;
 	writel(val, wdt_base + regs->wdt_mode);
 
 	/*
@@ -109,6 +112,7 @@ static int sunxi_wdt_restart(struct watchdog_device *wdt_dev,
 		mdelay(5);
 		val = readl(wdt_base + regs->wdt_mode);
 		val |= WDT_MODE_EN;
+		val |= regs->wdt_key_val;
 		writel(val, wdt_base + regs->wdt_mode);
 	}
 	return 0;
@@ -141,6 +145,7 @@ static int sunxi_wdt_set_timeout(struct watchdog_device *wdt_dev,
 	reg = readl(wdt_base + regs->wdt_mode);
 	reg &= ~(WDT_TIMEOUT_MASK << regs->wdt_timeout_shift);
 	reg |= wdt_timeout_map[timeout] << regs->wdt_timeout_shift;
+	reg |= regs->wdt_key_val;
 	writel(reg, wdt_base + regs->wdt_mode);
 
 	sunxi_wdt_ping(wdt_dev);
@@ -154,7 +159,7 @@ static int sunxi_wdt_stop(struct watchdog_device *wdt_dev)
 	void __iomem *wdt_base = sunxi_wdt->wdt_base;
 	const struct sunxi_wdt_reg *regs = sunxi_wdt->wdt_regs;
 
-	writel(0, wdt_base + regs->wdt_mode);
+	writel(regs->wdt_key_val, wdt_base + regs->wdt_mode);
 
 	return 0;
 }
@@ -176,11 +181,13 @@ static int sunxi_wdt_start(struct watchdog_device *wdt_dev)
 	reg = readl(wdt_base + regs->wdt_cfg);
 	reg &= ~(regs->wdt_reset_mask);
 	reg |= regs->wdt_reset_val;
+	reg |= regs->wdt_key_val;
 	writel(reg, wdt_base + regs->wdt_cfg);
 
 	/* Enable watchdog */
 	reg = readl(wdt_base + regs->wdt_mode);
 	reg |= WDT_MODE_EN;
+	reg |= regs->wdt_key_val;
 	writel(reg, wdt_base + regs->wdt_mode);
 
 	return 0;
@@ -220,9 +227,20 @@ static const struct sunxi_wdt_reg sun6i_wdt_reg = {
 	.wdt_reset_val = 0x01,
 };
 
+static const struct sunxi_wdt_reg sun20i_wdt_reg = {
+	.wdt_ctrl = 0x10,
+	.wdt_cfg = 0x14,
+	.wdt_mode = 0x18,
+	.wdt_timeout_shift = 4,
+	.wdt_reset_mask = 0x03,
+	.wdt_reset_val = 0x01,
+	.wdt_key_val = 0x16aa0000,
+};
+
 static const struct of_device_id sunxi_wdt_dt_ids[] = {
 	{ .compatible = "allwinner,sun4i-a10-wdt", .data = &sun4i_wdt_reg },
 	{ .compatible = "allwinner,sun6i-a31-wdt", .data = &sun6i_wdt_reg },
+	{ .compatible = "allwinner,sun20i-d1-wdt", .data = &sun20i_wdt_reg },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, sunxi_wdt_dt_ids);
-- 
2.31.1

Re: [PATCH v2 1/3] dt-bindings: watchdog: sunxi: Add compatible for R329

[Rob Herring]

On Wed, Aug 04, 2021 at 11:57:14PM -0500, Samuel Holland wrote:
> On existing SoCs, the watchdog has a single clock input: HOSC (OSC24M)
> divided by 750.  However, starting with R329, LOSC (OSC32k) is added as
> an alternative clock source, with a bit to switch between them.
> 
> Since 24 MHz / 750 == 32 kHz, not 32.768 kHz, the hardware adjusts the
> cycle counts to keep the timeouts independent of the clock source. This
> keeps the programming interface backward-compatible.
> 
> R329 also adds two new registers, to allow software to immediately drive
> the SoC reset signal.
> 
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> ---
> Changes v1 to v2:
>  - Switch from enum to const
>  - Add descriptions to "clocks" items
> 
>  .../watchdog/allwinner,sun4i-a10-wdt.yaml     | 32 ++++++++++++++++++-
>  1 file changed, 31 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
> index 9aa3c313c49f..8fa5b0d32381 100644
> --- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
> +++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
> @@ -24,6 +24,7 @@ properties:
>                - allwinner,sun50i-a100-wdt
>                - allwinner,sun50i-h6-wdt
>                - allwinner,sun50i-h616-wdt
> +              - allwinner,sun50i-r329-wdt
>            - const: allwinner,sun6i-a31-wdt
>        - items:
>            - const: allwinner,suniv-f1c100s-wdt
> @@ -33,7 +34,18 @@ properties:
>      maxItems: 1
>  
>    clocks:
> -    maxItems: 1
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      - description: High-frequency oscillator input, divided internally
> +      - description: Low-frequency oscillator input, only found on some variants
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      - const: hosc
> +      - const: losc
>  
>    interrupts:
>      maxItems: 1
> @@ -44,6 +56,24 @@ required:
>    - clocks
>    - interrupts
>  
> +if:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - allwinner,sun50i-r329-wdt
> +
> +then:
> +  properties:
> +    clocks:
> +      minItems: 2
> +
> +    clock-names:
> +      minItems: 2
> +
> +  required:
> +    - clock-names

Needs an else clause with 'maxItems: 1' or is the 2nd clock now valid 
for all?

> +
>  unevaluatedProperties: false
>  
>  examples:
> -- 
> 2.31.1
> 
> 

Re: [PATCH v2 1/3] dt-bindings: watchdog: sunxi: Add compatible for R329

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 2664 bytes --]

Hi,

On Wed, Aug 04, 2021 at 11:57:14PM -0500, Samuel Holland wrote:
> On existing SoCs, the watchdog has a single clock input: HOSC (OSC24M)
> divided by 750.  However, starting with R329, LOSC (OSC32k) is added as
> an alternative clock source, with a bit to switch between them.
> 
> Since 24 MHz / 750 == 32 kHz, not 32.768 kHz, the hardware adjusts the
> cycle counts to keep the timeouts independent of the clock source. This
> keeps the programming interface backward-compatible.
> 
> R329 also adds two new registers, to allow software to immediately drive
> the SoC reset signal.
> 
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> ---
> Changes v1 to v2:
>  - Switch from enum to const
>  - Add descriptions to "clocks" items
> 
>  .../watchdog/allwinner,sun4i-a10-wdt.yaml     | 32 ++++++++++++++++++-
>  1 file changed, 31 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
> index 9aa3c313c49f..8fa5b0d32381 100644
> --- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
> +++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
> @@ -24,6 +24,7 @@ properties:
>                - allwinner,sun50i-a100-wdt
>                - allwinner,sun50i-h6-wdt
>                - allwinner,sun50i-h616-wdt
> +              - allwinner,sun50i-r329-wdt
>            - const: allwinner,sun6i-a31-wdt
>        - items:
>            - const: allwinner,suniv-f1c100s-wdt
> @@ -33,7 +34,18 @@ properties:
>      maxItems: 1
>  
>    clocks:
> -    maxItems: 1
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      - description: High-frequency oscillator input, divided internally
> +      - description: Low-frequency oscillator input, only found on some variants
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      - const: hosc
> +      - const: losc
>  
>    interrupts:
>      maxItems: 1
> @@ -44,6 +56,24 @@ required:
>    - clocks
>    - interrupts
>  
> +if:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - allwinner,sun50i-r329-wdt
> +
> +then:
> +  properties:
> +    clocks:
> +      minItems: 2
> +
> +    clock-names:
> +      minItems: 2
> +
> +  required:
> +    - clock-names
> +

We should also make sure through an else clause that all the other SoCs
have a length of one for both clocks and clock-names

Also, it looks like you forgot the patch to enable the compatible in the
driver?

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 2/3] dt-bindings: watchdog: sunxi: Add compatible for D1

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 437 bytes --]

On Wed, Aug 04, 2021 at 11:57:15PM -0500, Samuel Holland wrote:
> D1 keeps the same register layout and clock sources as the R329, but it
> adds a key field which must be set to update the watchdog's "CFG" and
> "MODE" registers. Therefore it is not backward-compatible.
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Samuel Holland <samuel@sholland.org>

Acked-by: Maxime Ripard <maxime@cerno.tech>

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 3/3] watchdog: sunxi_wdt: Add support for D1

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 395 bytes --]

On Wed, Aug 04, 2021 at 11:57:16PM -0500, Samuel Holland wrote:
> D1 adds a key field to the "CFG" and "MODE" registers, that must be set
> to change the other bits. Add logic to set the key when updating those
> registers.
> 
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> Signed-off-by: Samuel Holland <samuel@sholland.org>

Acked-by: Maxime Ripard <maxime@cerno.tech>

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 1/3] dt-bindings: watchdog: sunxi: Add compatible for R329

[Samuel Holland]

On 8/18/21 4:07 AM, Maxime Ripard wrote:
> Hi,
> 
> On Wed, Aug 04, 2021 at 11:57:14PM -0500, Samuel Holland wrote:
>> On existing SoCs, the watchdog has a single clock input: HOSC (OSC24M)
>> divided by 750.  However, starting with R329, LOSC (OSC32k) is added as
>> an alternative clock source, with a bit to switch between them.
>>
>> Since 24 MHz / 750 == 32 kHz, not 32.768 kHz, the hardware adjusts the
>> cycle counts to keep the timeouts independent of the clock source. This
>> keeps the programming interface backward-compatible.
>>
>> R329 also adds two new registers, to allow software to immediately drive
>> the SoC reset signal.
>>
>> Signed-off-by: Samuel Holland <samuel@sholland.org>
>> ---
>> Changes v1 to v2:
>>  - Switch from enum to const
>>  - Add descriptions to "clocks" items
>>
>>  .../watchdog/allwinner,sun4i-a10-wdt.yaml     | 32 ++++++++++++++++++-
>>  1 file changed, 31 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
>> index 9aa3c313c49f..8fa5b0d32381 100644
>> --- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
>> +++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
>> @@ -24,6 +24,7 @@ properties:
>>                - allwinner,sun50i-a100-wdt
>>                - allwinner,sun50i-h6-wdt
>>                - allwinner,sun50i-h616-wdt
>> +              - allwinner,sun50i-r329-wdt
>>            - const: allwinner,sun6i-a31-wdt
>>        - items:
>>            - const: allwinner,suniv-f1c100s-wdt
>> @@ -33,7 +34,18 @@ properties:
>>      maxItems: 1
>>  
>>    clocks:
>> -    maxItems: 1
>> +    minItems: 1
>> +    maxItems: 2
>> +    items:
>> +      - description: High-frequency oscillator input, divided internally
>> +      - description: Low-frequency oscillator input, only found on some variants
>> +
>> +  clock-names:
>> +    minItems: 1
>> +    maxItems: 2
>> +    items:
>> +      - const: hosc
>> +      - const: losc
>>  
>>    interrupts:
>>      maxItems: 1
>> @@ -44,6 +56,24 @@ required:
>>    - clocks
>>    - interrupts
>>  
>> +if:
>> +  properties:
>> +    compatible:
>> +      contains:
>> +        enum:
>> +          - allwinner,sun50i-r329-wdt
>> +
>> +then:
>> +  properties:
>> +    clocks:
>> +      minItems: 2
>> +
>> +    clock-names:
>> +      minItems: 2
>> +
>> +  required:
>> +    - clock-names
>> +
> 
> We should also make sure through an else clause that all the other SoCs
> have a length of one for both clocks and clock-names

Yes, I'll do that for v3.

> Also, it looks like you forgot the patch to enable the compatible in the
> driver?

R329 has a fallback to A31, so it doesn't need any changes to the driver.

Regards,
Samuel

Re: [PATCH v2 2/3] dt-bindings: watchdog: sunxi: Add compatible for D1

[Guenter Roeck]

On Wed, Aug 04, 2021 at 11:57:15PM -0500, Samuel Holland wrote:
> D1 keeps the same register layout and clock sources as the R329, but it
> adds a key field which must be set to update the watchdog's "CFG" and
> "MODE" registers. Therefore it is not backward-compatible.
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> Acked-by: Maxime Ripard <maxime@cerno.tech>

Acked-by: Guenter Roeck <linux@roeck-us.net>

> ---
> Changes v1 to v2:
>  - None.
> 
>  .../devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml   | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
> index 8fa5b0d32381..6ef5e7caae80 100644
> --- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
> +++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
> @@ -29,6 +29,7 @@ properties:
>        - items:
>            - const: allwinner,suniv-f1c100s-wdt
>            - const: allwinner,sun4i-a10-wdt
> +      - const: allwinner,sun20i-d1-wdt
>  
>    reg:
>      maxItems: 1
> @@ -61,6 +62,7 @@ if:
>      compatible:
>        contains:
>          enum:
> +          - allwinner,sun20i-d1-wdt
>            - allwinner,sun50i-r329-wdt
>  
>  then: