LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Junio C Hamano <gitster@pobox.com>
To: git@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [ANNOUNCE] GIT 1.5.4.4
Date: Sun, 09 Mar 2008 03:46:12 -0700	[thread overview]
Message-ID: <7vr6eknpjf.fsf@gitster.siamese.dyndns.org> (raw)
In-Reply-To: <7vr6f31iwj.fsf@gitster.siamese.dyndns.org>

The latest maintenance release GIT 1.5.4.4 is available at the
usual places:

  http://www.kernel.org/pub/software/scm/git/

  git-1.5.4.4.tar.{gz,bz2}			(tarball)
  git-htmldocs-1.5.4.4.tar.{gz,bz2}		(preformatted docs)
  git-manpages-1.5.4.4.tar.{gz,bz2}		(preformatted docs)
  RPMS/$arch/git-*-1.5.4.4-1.$arch.rpm	(RPM)

----------------------------------------------------------------

GIT v1.5.4.4 Release Notes
==========================

Fixes since v1.5.4.3
--------------------

 * Building and installing with an overtight umask such as 077 made
   installed templates unreadable by others, while the rest of the install
   are done in a way that is friendly to umask 022.

 * "git cvsexportcommit -w $cvsdir" misbehaved when GIT_DIR is set to a
   relative directory.

 * "git http-push" had an invalid memory access that could lead it to
   segfault.

 * When "git rebase -i" gave control back to the user for a commit that is
   marked to be edited, it just said "modify it with commit --amend",
   without saying what to do to continue after modifying it.  Give an
   explicit instruction to run "rebase --continue" to be more helpful.

 * "git send-email" in 1.5.4.3 issued a bogus empty In-Reply-To: header.

 * "git bisect" showed mysterious "won't bisect on seeked tree" error message.
   This was leftover from Cogito days to prevent "bisect" starting from a
   cg-seeked state.  We still keep the Cogito safety, but running "git bisect
   start" when another bisect was in effect will clean up and start over.

 * "git push" with an explicit PATH to receive-pack did not quite work if
   receive-pack was not on usual PATH.  We earlier fixed the same issue
   with "git fetch" and upload-pack, but somehow forgot to do so in the
   other direction.

 * git-gui's info dialog was not displayed correctly when the user tries
   to commit nothing (i.e. without staging anything).

 * "git revert" did not properly fail when attempting to run with a
   dirty index.

 * "git merge --no-commit --no-ff <other>" incorrectly made commits.

 * "git merge --squash --no-ff <other>", which is a nonsense combination
   of options, was not rejected.

 * "git ls-remote" and "git remote show" against an empty repository
   failed, instead of just giving an empty result (regression).

 * "git fast-import" did not handle a renamed path whose name needs to be
   quoted, due to a bug in unquote_c_style() function.

 * "git cvsexportcommit" was confused when multiple files with the same
   basename needed to be pushed out in the same commit.

 * "git daemon" did not send early errors to syslog.

 * "git log --merge" did not work well with --left-right option.

 * "git svn" promprted for client cert password every time it accessed the
   server.

 * The reset command in "git fast-import" data stream was documented to
   end with an optional LF, but it actually required one.

 * "git svn dcommit/rebase" did not honor --rewrite-root option.

Also included are a handful documentation updates.

----------------------------------------------------------------

Changes since v1.5.4.3 are as follows:

Adeodato Simó (1):
      Really make the LF after reset in fast-import optional

Björn Steinbrink (1):
      receive-pack: Initialize PATH to include exec-dir.

Brandon Casey (1):
      builtin-reflog.c: don't install new reflog on write failure

Bryan Donlan (1):
      Documentation/git-am.txt: Pass -r in the example invocation of rm -f .dotest

Caio Marcelo de Oliveira Filho (1):
      filter-branch documentation: non-zero exit status in command abort the filter

Carl Worth (1):
      Eliminate confusing "won't bisect on seeked tree" failure

Daniel Barkalow (3):
      Use a single implementation and API for copy_file()
      Don't use GIT_CONFIG in t5505-remote
      Correct name of diff_flush() in API documentation

Gerrit Pape (2):
      templates/Makefile: don't depend on local umask setting
      git-merge.sh: better handling of combined --squash,--no-ff,--no-commit options

Jay Soffian (2):
      rev-parse: fix potential bus error with --parseopt option spec handling
      send-email: fix In-Reply-To regression

Jeff King (1):
      revert: actually check for a dirty index

Johan Herland (2):
      Add testcase for 'git cvsexportcommit -w $cvsdir ...' with relative $GIT_DIR
      Fix 'git cvsexportcommit -w $cvsdir ...' when used with relative $GIT_DIR

Johannes Schindelin (4):
      http-push: avoid invalid memory accesses
      http-push: do not get confused by submodules
      http-push: avoid a needless goto
      cvsexportcommit: be graceful when "cvs status" reorders the arguments

Johannes Sixt (2):
      daemon: send more error messages to the syslog
      daemon: ensure that base-path is an existing directory

John Goerzen (1):
      Fix dcommit, rebase when rewriteRoot is in use

Jonathan del Strother (1):
      Prompt to continue when editing during rebase --interactive

Junio C Hamano (6):
      Fix "git log --merge --left-right"
      Start preparing for 1.5.4.4
      tests: introduce test_must_fail
      Update draft release notes for 1.5.4.4
      test-lib: fix TERM to dumb for test repeatability
      GIT 1.5.4.4

Matthieu Moy (1):
      Fix incorrect wording in git-merge.txt.

Mike Hommey (2):
      Set proxy override with http_init()
      Fix random crashes in http_cleanup()

Mike Ralphson (1):
      Documentation cherry-pick: Fix cut-and-paste error

Miklos Vajna (2):
      Documentation/git-filter-branch: add a new msg-filter example
      Documentation/git svn log: add a note about timezones.

Pierre Habouzit (1):
      unquote_c_style: fix off-by-one.

Ping Yin (1):
      git-submodule: Fix typo 'url' which should be '$url'

Rémi Vanicat (1):
      git.el: find the git-status buffer whatever its name is

Santi Béjar (1):
      ident.c: reword error message when the user name cannot be determined

Sebastian Noack (1):
      git-svn: Don't prompt for client cert password everytime.

Shawn O. Pearce (6):
      Ensure 'make dist' compiles git-archive.exe on Cygwin
      Protect peel_ref fallback case from NULL parse_object result
      Correct fast-export file mode strings to match fast-import standard
      git-gui: Paper bag fix info dialog when no files are staged at commit
      Fix 'git remote show' regression on empty repository in 1.5.4
      git-gui: Gracefully fall back to po2msg.sh if msgfmt --tcl fails

Steven Drake (1):
      timezone_names[]: fixed the tz offset for New Zealand.

Uwe Kleine-König (1):
      config.txt: refer to --upload-pack and --receive-pack instead of --exec



  reply	other threads:[~2008-03-09 10:46 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-02-23 21:07 [ANNOUNCE] GIT 1.5.4.3 Junio C Hamano
2008-03-09 10:46 ` Junio C Hamano [this message]
2008-03-09 16:56   ` [ANNOUNCE] GIT 1.5.4.4 Jeff Garzik
2008-03-09 20:28     ` Junio C Hamano
2008-03-09 21:42       ` Jeff Garzik
2008-03-10  6:34         ` Junio C Hamano
2008-03-11 19:11           ` Jeff Garzik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7vr6eknpjf.fsf@gitster.siamese.dyndns.org \
    --to=gitster@pobox.com \
    --cc=git@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --subject='Re: [ANNOUNCE] GIT 1.5.4.4' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).