Re: [PATCH 1/4] platform: x86: intel_cht_int33fe: Fix dependencies

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 30-04-18 14:41, Heikki Krogerus wrote:
> The driver will not probe unless bq24190 is loaded, so
> making it a dependency.

Hmm, the dependency is pure run-time, with this Kconfig
change if a user now decides to builtin the intel_cht_int33fe
driver, the bq24190 driver must also be builtin, I'm not sure
if that is a good thing.

Regards,

Hans


> 
> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Cc: Wolfram Sang <wsa@the-dreams.de>
> Cc: Darren Hart <dvhart@infradead.org>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>   drivers/i2c/busses/Kconfig   | 3 +--
>   drivers/platform/x86/Kconfig | 4 ++--
>   2 files changed, 3 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 8d21b9825d71..fce9f2ca0570 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -202,8 +202,7 @@ config I2C_CHT_WC
>   
>   	  Note this controller is hooked up to a TI bq24292i charger-IC,
>   	  combined with a FUSB302 Type-C port-controller as such it is advised
> -	  to also select CONFIG_CHARGER_BQ24190=m and CONFIG_TYPEC_FUSB302=m
> -	  (the fusb302 driver currently is in drivers/staging).
> +	  to also select CONFIG_TYPEC_FUSB302=m.
>   
>   config I2C_NFORCE2
>   	tristate "Nvidia nForce2, nForce3 and nForce4"
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 39d06dd1f63a..1dbd9d547e60 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -866,6 +866,7 @@ config ACPI_CMPC
>   config INTEL_CHT_INT33FE
>   	tristate "Intel Cherry Trail ACPI INT33FE Driver"
>   	depends on X86 && ACPI && I2C && REGULATOR
> +	depends on CHARGER_BQ24190
>   	---help---
>   	  This driver add support for the INT33FE ACPI device found on
>   	  some Intel Cherry Trail devices.
> @@ -877,8 +878,7 @@ config INTEL_CHT_INT33FE
>   	  i2c drivers for these chips can bind to the them.
>   
>   	  If you enable this driver it is advised to also select
> -	  CONFIG_TYPEC_FUSB302=m, CONFIG_CHARGER_BQ24190=m and
> -	  CONFIG_BATTERY_MAX17042=m.
> +	  CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m.
>   
>   config INTEL_INT0002_VGPIO
>   	tristate "Intel ACPI INT0002 Virtual GPIO driver"
>