LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Tom Joseph <tjoseph@cadence.com>, <linux-omap@vger.kernel.org>,
	<linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Lokesh Vutla <lokeshvutla@ti.com>
Subject: Re: [PATCH v2 2/3] PCI: j721e: Add PCI legacy interrupt support for J721E
Date: Wed, 04 Aug 2021 16:13:39 +0100	[thread overview]
Message-ID: <87h7g5w8d8.wl-maz@kernel.org> (raw)
In-Reply-To: <20210804132912.30685-3-kishon@ti.com>

On Wed, 04 Aug 2021 14:29:11 +0100,
Kishon Vijay Abraham I <kishon@ti.com> wrote:
> 
> Add PCI legacy interrupt support for J721E. J721E has a single HW
> interrupt line for all the four legacy interrupts INTA/INTB/INTC/INTD.
> The HW interrupt line connected to GIC is a pulse interrupt whereas
> the legacy interrupts by definition is level interrupt. In order to
> provide level interrupt functionality to edge interrupt line, PCIe
> in J721E has provided IRQ_EOI register.
> 
> However due to Errata ID #i2094 ([1]), EOI feature is not enabled in HW
> and only a single pulse interrupt will be generated for every
> ASSERT_INTx/DEASSERT_INTx.

So my earlier remark stands. If you get a single edge, how do you
handle a level that is still high after having handled the interrupt
on hardware that has this bug?

> 
> [1] -> J721E DRA829/TDA4VM Processors Silicon Revision 1.1/1.0 SPRZ455A –
>        DECEMBER 2020 – REVISED AUGUST 2021
>        (https://www.ti.com/lit/er/sprz455a/sprz455a.pdf)
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  drivers/pci/controller/cadence/pci-j721e.c | 85 ++++++++++++++++++++++
>  1 file changed, 85 insertions(+)
> 
> diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
> index 2ec037c43bd5..c2e7a78dc31f 100644
> --- a/drivers/pci/controller/cadence/pci-j721e.c
> +++ b/drivers/pci/controller/cadence/pci-j721e.c
> @@ -29,6 +29,13 @@
>  #define LINK_DOWN		BIT(1)
>  #define J7200_LINK_DOWN		BIT(10)
>  
> +#define EOI_REG			0x10
> +
> +#define ENABLE_REG_SYS_0	0x100
> +#define STATUS_REG_SYS_0	0x500
> +#define STATUS_CLR_REG_SYS_0	0x700
> +#define INTx_EN(num)		(1 << (num))
> +
>  #define J721E_PCIE_USER_CMD_STATUS	0x4
>  #define LINK_TRAINING_ENABLE		BIT(0)
>  
> @@ -59,6 +66,7 @@ struct j721e_pcie {
>  	void __iomem		*user_cfg_base;
>  	void __iomem		*intd_cfg_base;
>  	u32			linkdown_irq_regfield;
> +	struct irq_domain	*legacy_irq_domain;
>  };
>  
>  enum j721e_pcie_mode {
> @@ -121,6 +129,79 @@ static void j721e_pcie_config_link_irq(struct j721e_pcie *pcie)
>  	j721e_pcie_intd_writel(pcie, ENABLE_REG_SYS_2, reg);
>  }
>  
> +static void j721e_pcie_v1_legacy_irq_handler(struct irq_desc *desc)
> +{
> +	struct j721e_pcie *pcie = irq_desc_get_handler_data(desc);
> +	struct irq_chip *chip = irq_desc_get_chip(desc);
> +	int i, virq;
> +	u32 reg;
> +
> +	chained_irq_enter(chip, desc);
> +
> +	for (i = 0; i < PCI_NUM_INTX; i++) {
> +		reg = j721e_pcie_intd_readl(pcie, STATUS_REG_SYS_0);
> +		if (!(reg & INTx_EN(i)))
> +			continue;

Why do you need to perform multiple reads? Surely reg contains all the
bits you need, doesn't it?

> +
> +		virq = irq_find_mapping(pcie->legacy_irq_domain, 3 - i);
> +		generic_handle_irq(virq);

Please combine both lines into a single generic_handle_domain_irq()
call.

> +		j721e_pcie_intd_writel(pcie, STATUS_CLR_REG_SYS_0, INTx_EN(i));

What is the purpose of this write? It feels like this should be a
irq_eoi callback.

> +	}
> +
> +	chained_irq_exit(chip, desc);
> +}
> +
> +static int j721e_pcie_intx_map(struct irq_domain *domain, unsigned int irq, irq_hw_number_t hwirq)
> +{
> +	irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);

An INTx interrupt is a level interrupt. Please use the corresponding flow.

> +	irq_set_chip_data(irq, domain->host_data);
> +
> +	return 0;
> +}
> +
> +static const struct irq_domain_ops j721e_pcie_intx_domain_ops = {
> +	.map = j721e_pcie_intx_map,
> +};
> +
> +static int j721e_pcie_config_legacy_irq(struct j721e_pcie *pcie)
> +{
> +	struct irq_domain *legacy_irq_domain;
> +	struct device *dev = pcie->dev;
> +	struct device_node *node = dev->of_node;
> +	struct device_node *intc_node;
> +	int irq, i;
> +	u32 reg;
> +
> +	intc_node = of_get_child_by_name(node, "interrupt-controller");
> +	if (!intc_node) {
> +		dev_dbg(dev, "interrupt-controller node is absent. Legacy INTR not supported\n");
> +		return 0;
> +	}
> +
> +	irq = irq_of_parse_and_map(intc_node, 0);
> +	if (!irq) {
> +		dev_err(dev, "Failed to parse and map legacy irq\n");
> +		return -EINVAL;
> +	}
> +	irq_set_chained_handler_and_data(irq, j721e_pcie_v1_legacy_irq_handler, pcie);
> +
> +	legacy_irq_domain = irq_domain_add_linear(intc_node, PCI_NUM_INTX,
> +						  &j721e_pcie_intx_domain_ops, pcie);
> +	if (!legacy_irq_domain) {
> +		dev_err(dev, "Failed to add irq domain for legacy irqs\n");
> +		return -EINVAL;
> +	}
> +	pcie->legacy_irq_domain = legacy_irq_domain;
> +
> +	for (i = 0; i < PCI_NUM_INTX; i++) {
> +		reg = j721e_pcie_intd_readl(pcie, ENABLE_REG_SYS_0);
> +		reg |= INTx_EN(i);
> +		j721e_pcie_intd_writel(pcie, ENABLE_REG_SYS_0, reg);
> +	}

This should be moved to the irq_unmask() callback.

Thanks,

	M.

-- 
Without deviation from the norm, progress is not possible.

  reply	other threads:[~2021-08-04 15:13 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-04 13:29 [PATCH v2 0/3] PCI: Add legacy interrupt support in pci-j721e Kishon Vijay Abraham I
2021-08-04 13:29 ` [PATCH v2 1/3] dt-bindings: PCI: ti,j721e: Add bindings to specify legacy interrupts Kishon Vijay Abraham I
2021-08-04 15:05   ` Marc Zyngier
2021-08-09  4:38     ` Kishon Vijay Abraham I
2021-08-13 17:17   ` Rob Herring
2021-08-18 13:58     ` Kishon Vijay Abraham I
2021-09-23  4:33       ` Kishon Vijay Abraham I
2021-09-23 15:44         ` Rob Herring
2021-08-04 13:29 ` [PATCH v2 2/3] PCI: j721e: Add PCI legacy interrupt support for J721E Kishon Vijay Abraham I
2021-08-04 15:13   ` Marc Zyngier [this message]
2021-08-09  4:50     ` Kishon Vijay Abraham I
2021-08-09  9:39       ` Marc Zyngier
2021-08-09 14:58         ` Kishon Vijay Abraham I
2021-08-10 12:33           ` Marc Zyngier
2021-08-11 12:07             ` Kishon Vijay Abraham I
2021-08-04 13:29 ` [PATCH v2 3/3] PCI: j721e: Add PCI legacy interrupt support for J7200 Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87h7g5w8d8.wl-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tjoseph@cadence.com \
    --subject='Re: [PATCH v2 2/3] PCI: j721e: Add PCI legacy interrupt support for J721E' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).