LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: "Fortier,Vincent [Montreal]" <Vincent.Fortier1@EC.GC.CA>
To: <linux-kernel@vger.kernel.org>
Subject: Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793
Date: Fri, 16 Feb 2007 10:27:15 -0500	[thread overview]
Message-ID: <8E8F647D7835334B985D069AE964A4F7028FE550@ECQCMTLMAIL1.quebec.int.ec.gc.ca> (raw)
In-Reply-To: <45D5C789.1090607@student.ltu.se>

[-- Attachment #1: Type: text/plain, Size: 2021 bytes --]

Hi all

I m using a Logitech MX 5000 keyboard with an included MX 1000 mouse,
both bluetooth using the same USB reciever.

When the USB reciever is already plugged-in at boot-time and the
Bluetooth service fires-up I get this message:
 =======================
BUG: warning: (value > m) at
drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
 [<c0405018>] dump_trace+0x69/0x1b6
 [<c040517d>] show_trace_log_lvl+0x18/0x2c
 [<c0405778>] show_trace+0xf/0x11
 [<c0405875>] dump_stack+0x15/0x17
 [<c05993c0>] hid_output_report+0x23c/0x2e7
 [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
 [<c05997fd>] hid_submit_report+0x134/0x15f
 [<c059bd09>] hiddev_ioctl+0x327/0x88a
 [<c04802c8>] do_ioctl+0x4c/0x62
 [<c0480528>] vfs_ioctl+0x24a/0x25c
 [<c0480586>] sys_ioctl+0x4c/0x66
 [<c040404b>] syscall_call+0x7/0xb
 [<005b5402>] 0x5b5402
 =======================

At this point both the keyboard and mouse do not work.  I simply have to
remove/replug the reciever to make them work properly... Here is the
dmesg associated with the replug:
usb 2-2: USB disconnect, address 3
usb 2-2.1: USB disconnect, address 6
usb 2-2.2: USB disconnect, address 4
usb 2-2.3: USB disconnect, address 5
usb 2-2: new full speed USB device using uhci_hcd and address 7
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 3 ports detected
usb 2-2.2: new full speed USB device using uhci_hcd and address 8
usb 2-2.2: configuration #1 chosen from 1 choice
input: Logitech Logitech BT Mini-Receiver as /class/input/input6
input: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on
usb-0000:00:1d.1-2.2
usb 2-2.3: new full speed USB device using uhci_hcd and address 9
usb 2-2.3: configuration #1 chosen from 1 choice
input: Logitech Logitech BT Mini-Receiver as /class/input/input7
input,hiddev96: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver]
on usb-0000:00:1d.1-2.3

Kernel: 2.6.19 on i686

I have attached the lsusb output and dmesg.

- vin

[-- Attachment #2: lsusb.txt --]
[-- Type: text/plain, Size: 22408 bytes --]


Bus 001 Device 001: ID 0000:0000  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed hub
  bMaxPacketSize0        64
  idVendor           0x0000 
  idProduct          0x0000 
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.19-1.2911.fc6 uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:1d.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0xc0
  PortPwrCtrlMask    0x66 
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power

Bus 003 Device 001: ID 0000:0000  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed hub
  bMaxPacketSize0        64
  idVendor           0x0000 
  idProduct          0x0000 
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.19-1.2911.fc6 uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:1d.2
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0xc0
  PortPwrCtrlMask    0x66 
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power

Bus 004 Device 001: ID 0000:0000  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x0000 
  idProduct          0x0000 
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.19-1.2911.fc6 ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:00:1d.7
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             6
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0xc0
  PortPwrCtrlMask    0x66 
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0000
   Port 5: 0000.0100 power
   Port 6: 0000.0503 highspeed power enable connect

Bus 004 Device 003: ID 413c:0058 Dell Computer Corp. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         2 TT per port
  bMaxPacketSize0        64
  idVendor           0x413c Dell Computer Corp.
  idProduct          0x0058 
  bcdDevice           10.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           41
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      1 Single TT
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      2 TT per port
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             4
  wHubCharacteristic 0x0089
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
    Port indicators
  bPwrOn2PwrGood       50 * 2 milli seconds
  bHubContrCurrent    100 milli Ampere
  DeviceRemovable    0xc0
  PortPwrCtrlMask    0x66 
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0503 highspeed power enable connect
   Port 3: 0000.0100 power
   Port 4: 0000.0103 power enable connect
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed hub
  bMaxPacketSize0        64
  bNumConfigurations      1

Bus 004 Device 004: ID 413c:0058 Dell Computer Corp. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         2 TT per port
  bMaxPacketSize0        64
  idVendor           0x413c Dell Computer Corp.
  idProduct          0x0058 
  bcdDevice           10.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           41
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      1 Single TT
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      2 TT per port
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             4
  wHubCharacteristic 0x0089
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
    Port indicators
  bPwrOn2PwrGood       50 * 2 milli seconds
  bHubContrCurrent    100 milli Ampere
  DeviceRemovable    0xc0
  PortPwrCtrlMask    0x66 
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed hub
  bMaxPacketSize0        64
  bNumConfigurations      1

Bus 004 Device 005: ID 054c:002c Sony Corp. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x054c Sony Corp.
  idProduct          0x002c 
  bcdDevice            6.01
  iManufacturer           1 Sony
  iProduct                2 USB Floppy Drive
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      4 Floppy (UFI)
      bInterfaceProtocol      0 Control/Bulk/Interrupt
      iInterface              4 FLOPPY
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval              16

Bus 002 Device 009: ID 046d:c70a Logitech, Inc. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x046d Logitech, Inc.
  idProduct          0xc70a 
  bcdDevice           40.02
  iManufacturer           1 Logitech
  iProduct                2 Logitech BT Mini-Receiver
  iSerial                 3 0007FA61C268
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4 RR40.02_B0036
    bmAttributes         0xa0
      Remote Wakeup
    MaxPower               98mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Devices
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      2 Mouse
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.11
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength     226
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval               5

Bus 002 Device 008: ID 046d:c70e Logitech, Inc. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x046d Logitech, Inc.
  idProduct          0xc70e 
  bcdDevice           40.02
  iManufacturer           1 Logitech
  iProduct                2 Logitech BT Mini-Receiver
  iSerial                 3 0007FA61C268
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4 RR40.02_B0036
    bmAttributes         0xa0
      Remote Wakeup
    MaxPower               98mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Devices
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      1 Keyboard
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.11
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      59
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              10

Bus 002 Device 007: ID 046d:0b02 Logitech, Inc. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed hub
  bMaxPacketSize0         8
  idVendor           0x046d Logitech, Inc.
  idProduct          0x0b02 
  bcdDevice           40.02
  iManufacturer           1 Logitech
  iProduct                2 Logitech BT Mini-Receiver
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             3
  wHubCharacteristic 0x0004
    Ganged power switching
    Compound device
    Ganged overcurrent protection
  bPwrOn2PwrGood       50 * 2 milli seconds
  bHubContrCurrent    100 milli Ampere
  DeviceRemovable    0xc0
  PortPwrCtrlMask    0x66 
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0103 power enable connect
   Port 3: 0000.0103 power enable connect

Bus 002 Device 001: ID 0000:0000  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed hub
  bMaxPacketSize0        64
  idVendor           0x0000 
  idProduct          0x0000 
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.19-1.2911.fc6 uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:1d.1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0xc0
  PortPwrCtrlMask    0x66 
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0103 power enable connect

[-- Attachment #3: dmesg.2.6.19-1.2911.fc6.PreBoot-plugged.txt --]
[-- Type: text/plain, Size: 27292 bytes --]

Linux version 2.6.19-1.2911.fc6 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sat Feb 10 15:51:47 EST 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ffae000 (usable)
 BIOS-e820: 000000003ffae000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 262062) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   262062
early_node_map[1] active PFN ranges
    0:        0 ->   262062
On node 0 totalpages: 262062
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 255 pages used for memmap
  HighMem zone: 32431 pages, LIFO batch:7
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 DELL                                  ) @ 0x000fdf00
ACPI: RSDT (v001 DELL    CPi R   0x27d5061e ASL  0x00000061) @ 0x3fff0000
ACPI: FADT (v001 DELL    CPi R   0x27d5061e ASL  0x00000061) @ 0x3fff0400
ACPI: ASF! (v016 DELL    CPi R   0x27d5061e ASL  0x00000061) @ 0x3fff0800
ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Allocating PCI resources starting at 50000000 (gap: 40000000:beda0000)
Detected 1998.429 MHz processor.
Built 1 zonelists.  Total pages: 260015
Kernel command line: ro root=LABEL=/ vga=0x305
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01829000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0806000 soft=c07e6000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032176k/1048248k available (2210k kernel code, 15352k reserved, 1131k data, 240k init, 130744k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc07a5000 - 0xc07e1000   ( 240 kB)
      .data : 0xc0628a27 - 0xc07438f4   (1131 kB)
      .text : 0xc0400000 - 0xc0628a27   (2210 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3998.18 BogoMIPS (lpj=1999091)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f1bf 00000000 00000000 00000040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0800)
CPU0: Intel(R) Pentium(R) M processor 2.00GHz stepping 06
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=424 bytes
sizeof(dentry)=144 bytes
sizeof(ext3inode)=600 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=172 bytes
sizeof(task_struct)=1376 bytes
checking if image is initramfs... it is
Freeing initrd memory: 1541k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc96e, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0880-08bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
PCI: Bus #07 (-#0a) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:02: ioport range 0x800-0x805 could not be reserved
pnp: 00:02: ioport range 0x808-0x80f could not be reserved
pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
pnp: 00:03: ioport range 0x806-0x807 has been reserved
pnp: 00:03: ioport range 0x810-0x85f could not be reserved
pnp: 00:03: ioport range 0x860-0x87f has been reserved
pnp: 00:03: ioport range 0x880-0x8bf has been reserved
pnp: 00:03: ioport range 0x8c0-0x8df has been reserved
pnp: 00:08: ioport range 0x900-0x97f has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: c000-cfff
  MEM window: fc000000-fdffffff
  PREFETCH window: d0000000-dfffffff
PCI: Bus 3, cardbus bridge: 0000:02:01.0
  IO window: 0000d000-0000d0ff
  IO window: 0000d400-0000d4ff
  PREFETCH window: 50000000-51ffffff
  MEM window: f6000000-f7ffffff
PCI: Bus 7, cardbus bridge: 0000:02:01.1
  IO window: 0000d800-0000d8ff
  IO window: 0000dc00-0000dcff
  PREFETCH window: 52000000-53ffffff
  MEM window: f8000000-f9ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: d000-efff
  MEM window: f6000000-fbffffff
  PREFETCH window: 50000000-53ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1171638161.662:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key BE1C9570C411C444
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 131072k
vesafb: mode is 1024x768x8, linelength=1024, pages=3
vesafb: protected mode interface info at c000:e560
vesafb: pmi: set display start = c00ce596, set palette = c00ce600
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THM] (56 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: AGP aperture is 128M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: Hitachi HTS721060G9AT00, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: _NEC DVD+RW ND-6100A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 117210240 sectors (60011 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
ide-floppy driver 0.99.newide
Yenta: CardBus bridge found at 0000:02:01.0 [1028:014e]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:01.0, mfunc 0x012c1202, devctl 0x64
Yenta: ISA IRQ mask 0x04d8, PCI irq 11
Socket status: 30000410
Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
cs: IO port probe 0xd000-0xefff: clean.
pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
Yenta: CardBus bridge found at 0000:02:01.1 [1028:014e]
Yenta: ISA IRQ mask 0x04d8, PCI irq 11
Socket status: 30000047
Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
cs: IO port probe 0xd000-0xefff: clean.
pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 240k freed
Time: acpi_pm clocksource has been installed.
Write protecting the kernel read-only data: 415k
input: AT Translated Set 2 keyboard as /class/input/input0
pccard: PCMCIA card inserted into slot 0
cs: memory probe 0xf6000000-0xfbffffff: excluding 0xf6000000-0xfa1fffff 0xfae00000-0xfb3fffff
pcmcia: registering new device pcmcia0.0
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
input: PS/2 Mouse as /class/input/input1
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4fffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
SCSI subsystem initialized
libata version 2.00 loaded.
device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
usb 4-6: new high speed USB device using ehci_hcd and address 3
usb 4-6: configuration #1 chosen from 1 choice
hub 4-6:1.0: USB hub found
hub 4-6:1.0: 4 ports detected
usb 2-2: new full speed USB device using uhci_hcd and address 3
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 3 ports detected
usb 4-6.2: new high speed USB device using ehci_hcd and address 4
usb 4-6.2: configuration #1 chosen from 1 choice
hub 4-6.2:1.0: USB hub found
hub 4-6.2:1.0: 4 ports detected
usb 4-6.4: new full speed USB device using ehci_hcd and address 5
usb 4-6.4: configuration #1 chosen from 1 choice
usb 2-2.2: new full speed USB device using uhci_hcd and address 4
Initializing USB Mass Storage driver...
usb 2-2.2: configuration #1 chosen from 1 choice
input: Logitech Logitech BT Mini-Receiver as /class/input/input3
input: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.1-2.2
usb 2-2.3: new full speed USB device using uhci_hcd and address 5
usb 2-2.3: configuration #1 chosen from 1 choice
input: Logitech Logitech BT Mini-Receiver as /class/input/input4
input,hiddev96: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.1-2.3
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
audit(1171638170.739:2): selinux=0 auid=4294967295
scsi 0:0:0:0: Direct-Access     SONY     USB-FDU          6.01 PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: Attached scsi removable disk sda
usb-storage: device scan complete
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
0.0: ttyS1 at I/O 0xd3f8 (irq = 3) is a 16450
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
ieee1394: Initialized config rom entry `ip1394'
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
input: PC Speaker as /class/input/input5
bcm43xx driver
ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
bcm43xx: Chip ID 0x4306, rev 0x3
bcm43xx: Number of cores: 5
bcm43xx: Core 0: ID 0x800, rev 0x4, vendor 0x4243, enabled
bcm43xx: Core 1: ID 0x812, rev 0x5, vendor 0x4243, disabled
bcm43xx: Core 2: ID 0x80d, rev 0x2, vendor 0x4243, enabled
bcm43xx: Core 3: ID 0x807, rev 0x2, vendor 0x4243, disabled
bcm43xx: Core 4: ID 0x804, rev 0x9, vendor 0x4243, enabled
bcm43xx: PHY connected
bcm43xx: Detected PHY: Version: 2, Type 2, Revision 2
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.00 (08-Oct-2006)
iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: PCI Interrupt 0000:02:01.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[fafef800-fafeffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
tg3.c:v3.69 (November 15, 2006)
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
eth1: Tigon3 [partno(BCM95705A50) rev 3001 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:11:43:6c:ad:cd
eth1: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
eth1: dma_rwctrl[763f0000] dma_mask[64-bit]
sd 0:0:0:0: Attached scsi generic sg0 type 0
nvidia: module license 'NVIDIA' taints kernel.
intel_rng: FWH not detected
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
NVRM: loading NVIDIA UNIX x86 Kernel Module  1.0-9746  Fri Dec 15 09:54:45 PST 2006
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[344fc00037a260c1]
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
intel8x0_measure_ac97_clock: measured 50427 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.6 to 64
MC'97 1 converters and GPIO not ready (0xff00)
floppy0: no floppy controllers found
lp0: using parport0 (interrupt-driven).
lp0: console ready
sonypi: Sony Programmable I/O Controller Driver v1.26.
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PBTN]
ACPI: Sleep Button (CM) [SBTN]
ACPI: ACPI Dock Station Driver 
ibm_acpi: ec object not found
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on hda5, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2048248k swap on /dev/hda6.  Priority:-1 extents:1 across:2048248k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
PM: Writing back config space on device 0000:02:00.0 at offset b (was 165d14e4, writing 865d1028)
PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000001)
PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00106)
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
 [<c0405018>] dump_trace+0x69/0x1b6
 [<c040517d>] show_trace_log_lvl+0x18/0x2c
 [<c0405778>] show_trace+0xf/0x11
 [<c0405875>] dump_stack+0x15/0x17
 [<c05993c0>] hid_output_report+0x23c/0x2e7
 [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
 [<c05997fd>] hid_submit_report+0x134/0x15f
 [<c059bd09>] hiddev_ioctl+0x327/0x88a
 [<c04802c8>] do_ioctl+0x4c/0x62
 [<c0480528>] vfs_ioctl+0x24a/0x25c
 [<c0480586>] sys_ioctl+0x4c/0x66
 [<c040404b>] syscall_call+0x7/0xb
 [<005b5402>] 0x5b5402
 =======================
BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
 [<c0405018>] dump_trace+0x69/0x1b6
 [<c040517d>] show_trace_log_lvl+0x18/0x2c
 [<c0405778>] show_trace+0xf/0x11
 [<c0405875>] dump_stack+0x15/0x17
 [<c05993c0>] hid_output_report+0x23c/0x2e7
 [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
 [<c05997fd>] hid_submit_report+0x134/0x15f
 [<c059bd09>] hiddev_ioctl+0x327/0x88a
 [<c04802c8>] do_ioctl+0x4c/0x62
 [<c0480528>] vfs_ioctl+0x24a/0x25c
 [<c0480586>] sys_ioctl+0x4c/0x66
 [<c040404b>] syscall_call+0x7/0xb
 [<005b5402>] 0x5b5402
 =======================
BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
 [<c0405018>] dump_trace+0x69/0x1b6
 [<c040517d>] show_trace_log_lvl+0x18/0x2c
 [<c0405778>] show_trace+0xf/0x11
 [<c0405875>] dump_stack+0x15/0x17
 [<c05993c0>] hid_output_report+0x23c/0x2e7
 [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
 [<c05997fd>] hid_submit_report+0x134/0x15f
 [<c059bd09>] hiddev_ioctl+0x327/0x88a
 [<c04802c8>] do_ioctl+0x4c/0x62
 [<c0480528>] vfs_ioctl+0x24a/0x25c
 [<c0480586>] sys_ioctl+0x4c/0x66
 [<c040404b>] syscall_call+0x7/0xb
 [<005b5402>] 0x5b5402
 =======================
BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
 [<c0405018>] dump_trace+0x69/0x1b6
 [<c040517d>] show_trace_log_lvl+0x18/0x2c
 [<c0405778>] show_trace+0xf/0x11
 [<c0405875>] dump_stack+0x15/0x17
 [<c05993c0>] hid_output_report+0x23c/0x2e7
 [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
 [<c05997fd>] hid_submit_report+0x134/0x15f
 [<c059bd09>] hiddev_ioctl+0x327/0x88a
 [<c04802c8>] do_ioctl+0x4c/0x62
 [<c0480528>] vfs_ioctl+0x24a/0x25c
 [<c0480586>] sys_ioctl+0x4c/0x66
 [<c040404b>] syscall_call+0x7/0xb
 [<005b5402>] 0x5b5402
 =======================
BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
 [<c0405018>] dump_trace+0x69/0x1b6
 [<c040517d>] show_trace_log_lvl+0x18/0x2c
 [<c0405778>] show_trace+0xf/0x11
 [<c0405875>] dump_stack+0x15/0x17
 [<c05993c0>] hid_output_report+0x23c/0x2e7
 [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
 [<c05997fd>] hid_submit_report+0x134/0x15f
 [<c059bd09>] hiddev_ioctl+0x327/0x88a
 [<c04802c8>] do_ioctl+0x4c/0x62
 [<c0480528>] vfs_ioctl+0x24a/0x25c
 [<c0480586>] sys_ioctl+0x4c/0x66
 [<c040404b>] syscall_call+0x7/0xb
 [<005b5402>] 0x5b5402
 =======================
BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
 [<c0405018>] dump_trace+0x69/0x1b6
 [<c040517d>] show_trace_log_lvl+0x18/0x2c
 [<c0405778>] show_trace+0xf/0x11
 [<c0405875>] dump_stack+0x15/0x17
 [<c05993c0>] hid_output_report+0x23c/0x2e7
 [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
 [<c05997fd>] hid_submit_report+0x134/0x15f
 [<c059bd09>] hiddev_ioctl+0x327/0x88a
 [<c04802c8>] do_ioctl+0x4c/0x62
 [<c0480528>] vfs_ioctl+0x24a/0x25c
 [<c0480586>] sys_ioctl+0x4c/0x66
 [<c040404b>] syscall_call+0x7/0xb
 [<005b5402>] 0x5b5402
 =======================
BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
 [<c0405018>] dump_trace+0x69/0x1b6
 [<c040517d>] show_trace_log_lvl+0x18/0x2c
 [<c0405778>] show_trace+0xf/0x11
 [<c0405875>] dump_stack+0x15/0x17
 [<c05993c0>] hid_output_report+0x23c/0x2e7
 [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
 [<c05997fd>] hid_submit_report+0x134/0x15f
 [<c059bd09>] hiddev_ioctl+0x327/0x88a
 [<c04802c8>] do_ioctl+0x4c/0x62
 [<c0480528>] vfs_ioctl+0x24a/0x25c
 [<c0480586>] sys_ioctl+0x4c/0x66
 [<c040404b>] syscall_call+0x7/0xb
 [<005b5402>] 0x5b5402
 =======================
BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
 [<c0405018>] dump_trace+0x69/0x1b6
 [<c040517d>] show_trace_log_lvl+0x18/0x2c
 [<c0405778>] show_trace+0xf/0x11
 [<c0405875>] dump_stack+0x15/0x17
 [<c05993c0>] hid_output_report+0x23c/0x2e7
 [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
 [<c05997fd>] hid_submit_report+0x134/0x15f
 [<c059bd09>] hiddev_ioctl+0x327/0x88a
 [<c04802c8>] do_ioctl+0x4c/0x62
 [<c0480528>] vfs_ioctl+0x24a/0x25c
 [<c0480586>] sys_ioctl+0x4c/0x66
 [<c040404b>] syscall_call+0x7/0xb
 [<005b5402>] 0x5b5402
 =======================
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
usb 2-2.1: new full speed USB device using uhci_hcd and address 6
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
usb 2-2.1: configuration #1 chosen from 1 choice
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
eth0: no IPv6 routers present
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode

  parent reply	other threads:[~2007-02-16 15:48 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-02-16 12:03 [KJ][PATCH] is_power_of_2 in ia64mm Vignesh Babu BM
2007-02-16 15:02 ` [KJ] [PATCH] " Richard Knutsson
2007-02-16 15:13   ` Andreas Schwab
2007-02-16 15:57     ` Richard Knutsson
2007-02-16 15:59       ` Andreas Schwab
2007-02-16 16:40         ` Richard Knutsson
2007-02-16 16:43           ` Andreas Schwab
2007-02-16 17:06           ` Robert P. J. Day
2007-02-16 17:36             ` Richard Knutsson
2007-02-16 16:58       ` Robert P. J. Day
2007-02-16 15:27   ` Fortier,Vincent [Montreal] [this message]
2007-02-18 21:23     ` Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793 Jiri Kosina
2007-02-19  0:25       ` Marcel Holtmann
2007-02-19  9:36         ` Jiri Kosina
2007-02-27 15:54         ` Jiri Kosina
2007-02-27 16:12           ` Fortier,Vincent [Montreal]
     [not found]             ` <Pine.LNX.4.64.0702271713220.10496@twin.jikos.cz>
2007-02-27 20:35               ` Fortier,Vincent [Montreal]
2007-02-20  2:11 Fwd: " Veronique & Vincent
2007-02-20  8:02 ` Jiri Kosina
2007-02-22  2:50   ` Pete Zaitcev
2007-02-22  8:04     ` Jiri Kosina
2007-02-22 10:38     ` Veronique & Vincent
2007-02-22 10:46       ` Jiri Kosina
2007-03-05 19:19 Amedee Van Gasse
2007-03-05 21:54 ` Jiri Kosina
     [not found]   ` <1173191358.9292.4.camel@saruman>
2007-03-06 14:44     ` Jiri Kosina
2007-03-23  9:15 ` Jiri Kosina

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8E8F647D7835334B985D069AE964A4F7028FE550@ECQCMTLMAIL1.quebec.int.ec.gc.ca \
    --to=vincent.fortier1@ec.gc.ca \
    --cc=linux-kernel@vger.kernel.org \
    --subject='Re: Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).