LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Paul Cercueil <paul@crapouillou.net>
To: 周琰杰 <zhouyanjie@wanyeetech.com>
Cc: daniel.lezcano@linaro.org, tglx@linutronix.de,
	linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
	dongsheng.qiu@ingenic.com, aric.pzqi@ingenic.com,
	rick.tyliu@ingenic.com, sihui.liu@ingenic.com,
	jun.jiang@ingenic.com, sernia.zhou@foxmail.com
Subject: Re: [PATCH v2] clocksource: Ingenic: Improve the code.
Date: Fri, 30 Jul 2021 20:00:08 +0100	[thread overview]
Message-ID: <8GN2XQ.MOCZ4R16ZTRH1@crapouillou.net> (raw)
In-Reply-To: <1627638188-116163-1-git-send-email-zhouyanjie@wanyeetech.com>

Hi,

Le ven., juil. 30 2021 at 17:43:08 +0800, 周琰杰 (Zhou Yanjie) 
<zhouyanjie@wanyeetech.com> a écrit :
> Use "FIELD_GET()" and "FIELD_PREP()" to simplify the code.
> 
> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>

Reviewed-by: Paul Cercueil <paul@crapouillou.net>

Thanks!
-Paul

> ---
> 
> Notes:
>     v1->v2:
>     Split "val = (val & ~OSTCCR_PRESCALEx_MASK) | 
> FIELD_PREP(OSTCCR_PRESCALEx_MASK, prescale)"
>     into "val &= ~OSTCCR_PRESCALEx_MASK" and "val |= 
> FIELD_PREP(OSTCCR_PRESCALEx_MASK, prescale)"
>     as Paul Cercueil's suggestion.
> 
>  drivers/clocksource/ingenic-sysost.c | 13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/clocksource/ingenic-sysost.c 
> b/drivers/clocksource/ingenic-sysost.c
> index a129840..cb6fc2f 100644
> --- a/drivers/clocksource/ingenic-sysost.c
> +++ b/drivers/clocksource/ingenic-sysost.c
> @@ -4,6 +4,7 @@
>   * Copyright (c) 2020 周琰杰 (Zhou Yanjie) 
> <zhouyanjie@wanyeetech.com>
>   */
> 
> +#include <linux/bitfield.h>
>  #include <linux/bitops.h>
>  #include <linux/clk.h>
>  #include <linux/clk-provider.h>
> @@ -34,8 +35,6 @@
>  /* bits within the OSTCCR register */
>  #define OSTCCR_PRESCALE1_MASK	0x3
>  #define OSTCCR_PRESCALE2_MASK	0xc
> -#define OSTCCR_PRESCALE1_LSB	0
> -#define OSTCCR_PRESCALE2_LSB	2
> 
>  /* bits within the OSTCR register */
>  #define OSTCR_OST1CLR			BIT(0)
> @@ -98,7 +97,7 @@ static unsigned long 
> ingenic_ost_percpu_timer_recalc_rate(struct clk_hw *hw,
> 
>  	prescale = readl(ost_clk->ost->base + info->ostccr_reg);
> 
> -	prescale = (prescale & OSTCCR_PRESCALE1_MASK) >> 
> OSTCCR_PRESCALE1_LSB;
> +	prescale = FIELD_GET(OSTCCR_PRESCALE1_MASK, prescale);
> 
>  	return parent_rate >> (prescale * 2);
>  }
> @@ -112,7 +111,7 @@ static unsigned long 
> ingenic_ost_global_timer_recalc_rate(struct clk_hw *hw,
> 
>  	prescale = readl(ost_clk->ost->base + info->ostccr_reg);
> 
> -	prescale = (prescale & OSTCCR_PRESCALE2_MASK) >> 
> OSTCCR_PRESCALE2_LSB;
> +	prescale = FIELD_GET(OSTCCR_PRESCALE2_MASK, prescale);
> 
>  	return parent_rate >> (prescale * 2);
>  }
> @@ -151,7 +150,8 @@ static int 
> ingenic_ost_percpu_timer_set_rate(struct clk_hw *hw, unsigned long re
>  	int val;
> 
>  	val = readl(ost_clk->ost->base + info->ostccr_reg);
> -	val = (val & ~OSTCCR_PRESCALE1_MASK) | (prescale << 
> OSTCCR_PRESCALE1_LSB);
> +	val &= ~OSTCCR_PRESCALE1_MASK;
> +	val |= FIELD_PREP(OSTCCR_PRESCALE1_MASK, prescale);
>  	writel(val, ost_clk->ost->base + info->ostccr_reg);
> 
>  	return 0;
> @@ -166,7 +166,8 @@ static int 
> ingenic_ost_global_timer_set_rate(struct clk_hw *hw, unsigned long re
>  	int val;
> 
>  	val = readl(ost_clk->ost->base + info->ostccr_reg);
> -	val = (val & ~OSTCCR_PRESCALE2_MASK) | (prescale << 
> OSTCCR_PRESCALE2_LSB);
> +	val &= ~OSTCCR_PRESCALE2_MASK;
> +	val |= FIELD_PREP(OSTCCR_PRESCALE2_MASK, prescale);
>  	writel(val, ost_clk->ost->base + info->ostccr_reg);
> 
>  	return 0;
> --
> 2.7.4
> 



  reply	other threads:[~2021-07-30 19:00 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-30  9:43 周琰杰 (Zhou Yanjie)
2021-07-30 19:00 ` Paul Cercueil [this message]
2021-08-26 16:25 ` [tip: timers/core] clocksource/drivers/ingenic: Use bitfield macro helpers tip-bot2 for 周琰杰

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8GN2XQ.MOCZ4R16ZTRH1@crapouillou.net \
    --to=paul@crapouillou.net \
    --cc=aric.pzqi@ingenic.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=dongsheng.qiu@ingenic.com \
    --cc=jun.jiang@ingenic.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=rick.tyliu@ingenic.com \
    --cc=sernia.zhou@foxmail.com \
    --cc=sihui.liu@ingenic.com \
    --cc=tglx@linutronix.de \
    --cc=zhouyanjie@wanyeetech.com \
    --subject='Re: [PATCH v2] clocksource: Ingenic: Improve the code.' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).