LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Pierre Morel <pmorel@linux.ibm.com>
To: David Hildenbrand <david@redhat.com>, kvm@vger.kernel.org
Cc: linux-s390@vger.kernel.org, linux-kernel@vger.kernel.org,
	borntraeger@de.ibm.com, frankja@linux.ibm.com, cohuck@redhat.com,
	thuth@redhat.com, imbrenda@linux.ibm.com, hca@linux.ibm.com,
	gor@linux.ibm.com
Subject: Re: [PATCH v3 2/3] s390x: KVM: Implementation of Multiprocessor Topology-Change-Report
Date: Thu, 9 Sep 2021 11:03:30 +0200	[thread overview]
Message-ID: <8b30dd8b-45f6-c04f-a23a-2a4477e21938@linux.ibm.com> (raw)
In-Reply-To: <d85a6998-0f86-44d9-4eae-3051b65c2b4e@redhat.com>



On 9/6/21 8:37 PM, David Hildenbrand wrote:
> On 03.08.21 10:26, Pierre Morel wrote:
>> We let the userland hypervisor know if the machine support the CPU
>> topology facility using a new KVM capability: KVM_CAP_S390_CPU_TOPOLOGY.
>>
>> The PTF instruction will report a topology change if there is any change
>> with a previous STSI_15_2 SYSIB.
>> Changes inside a STSI_15_2 SYSIB occur if CPU bits are set or clear
>> inside the CPU Topology List Entry CPU mask field, which happens with
>> changes in CPU polarization, dedication, CPU types and adding or
>> removing CPUs in a socket.
>>
>> The reporting to the guest is done using the Multiprocessor
>> Topology-Change-Report (MTCR) bit of the utility entry of the guest's
>> SCA which will be cleared during the interpretation of PTF.
>>
>> To check if the topology has been modified we use a new field of the
>> arch vCPU to save the previous real CPU ID at the end of a schedule
>> and verify on next schedule that the CPU used is in the same socket.
>>
>> We deliberatly ignore:
>> - polarization: only horizontal polarization is currently used in linux.
>> - CPU Type: only IFL Type are supported in Linux
>> - Dedication: we consider that only a complete dedicated CPU stack can
>>    take benefit of the CPU Topology.
>>
>> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
> 
> 
>> @@ -228,7 +232,7 @@ struct kvm_s390_sie_block {
>>       __u8    icptcode;        /* 0x0050 */
>>       __u8    icptstatus;        /* 0x0051 */
>>       __u16    ihcpu;            /* 0x0052 */
>> -    __u8    reserved54;        /* 0x0054 */
>> +    __u8    mtcr;            /* 0x0054 */
>>   #define IICTL_CODE_NONE         0x00
>>   #define IICTL_CODE_MCHK         0x01
>>   #define IICTL_CODE_EXT         0x02
>> @@ -246,6 +250,7 @@ struct kvm_s390_sie_block {
>>   #define ECB_TE        0x10
>>   #define ECB_SRSI    0x04
>>   #define ECB_HOSTPROTINT    0x02
>> +#define ECB_PTF        0x01
> 
>  From below I understand, that ECB_PTF can be used with stfl(11) in the 
> hypervisor.
> 
> What is to happen if the hypervisor doesn't support stfl(11) and we 
> consequently cannot use ECB_PTF? Will QEMU be able to emulate PTF fully?
> 
> 
>>       __u8    ecb;            /* 0x0061 */
>>   #define ECB2_CMMA    0x80
>>   #define ECB2_IEP    0x20
>> @@ -747,6 +752,7 @@ struct kvm_vcpu_arch {
>>       bool skey_enabled;
>>       struct kvm_s390_pv_vcpu pv;
>>       union diag318_info diag318_info;
>> +    int prev_cpu;
>>   };
>>   struct kvm_vm_stat {
>> diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
>> index b655a7d82bf0..ff6d8a2b511c 100644
>> --- a/arch/s390/kvm/kvm-s390.c
>> +++ b/arch/s390/kvm/kvm-s390.c
>> @@ -568,6 +568,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, 
>> long ext)
>>       case KVM_CAP_S390_VCPU_RESETS:
>>       case KVM_CAP_SET_GUEST_DEBUG:
>>       case KVM_CAP_S390_DIAG318:
>> +    case KVM_CAP_S390_CPU_TOPOLOGY:
> 
> I would have expected instead
> 
> r = test_facility(11);
> break

I will change to this as we decided not to support emulation if the hist 
does not support facility 11.


> 
> ...
> 
>>           r = 1;
>>           break;
>>       case KVM_CAP_SET_GUEST_DEBUG2:
>> @@ -819,6 +820,23 @@ int kvm_vm_ioctl_enable_cap(struct kvm *kvm, 
>> struct kvm_enable_cap *cap)
>>           icpt_operexc_on_all_vcpus(kvm);
>>           r = 0;
>>           break;
>> +    case KVM_CAP_S390_CPU_TOPOLOGY:
>> +        mutex_lock(&kvm->lock);
>> +        if (kvm->created_vcpus) {
>> +            r = -EBUSY;
>> +        } else {
> 
> ...
> } else if (test_facility(11)) {
>      set_kvm_facility(kvm->arch.model.fac_mask, 11);
>      set_kvm_facility(kvm->arch.model.fac_list, 11);
>      r = 0;
> } else {
>      r = -EINVAL;
> }
> 
> similar to how we handle KVM_CAP_S390_VECTOR_REGISTERS.
> 
> But I assume you want to be able to support hosts without ECB_PTF, correct?

No more, after Christian comments we do not want to support emulation at 
all.

> 
> 

...snip...

>> +
>> +    /* PTF needs both host and guest facilities to enable 
>> interpretation */
>> +    if (test_kvm_facility(vcpu->kvm, 11) && test_facility(11))
>> +        vcpu->arch.sie_block->ecb |= ECB_PTF;
> 
> Here you say we need both ...
> 
>> +
>>       if (test_kvm_facility(vcpu->kvm, 73))
>>           vcpu->arch.sie_block->ecb |= ECB_TE;
>> diff --git a/arch/s390/kvm/vsie.c b/arch/s390/kvm/vsie.c
>> index 4002a24bc43a..50d67190bf65 100644
>> --- a/arch/s390/kvm/vsie.c
>> +++ b/arch/s390/kvm/vsie.c
>> @@ -503,6 +503,9 @@ static int shadow_scb(struct kvm_vcpu *vcpu, 
>> struct vsie_page *vsie_page)
>>       /* Host-protection-interruption introduced with ESOP */
>>       if (test_kvm_cpu_feat(vcpu->kvm, KVM_S390_VM_CPU_FEAT_ESOP))
>>           scb_s->ecb |= scb_o->ecb & ECB_HOSTPROTINT;
>> +    /* CPU Topology */
>> +    if (test_kvm_facility(vcpu->kvm, 11))
>> +        scb_s->ecb |= scb_o->ecb & ECB_PTF;
> 
> but here you don't check?

do we really need to check at all, even for test_kvm_facility() ?
as facilities do not change during a guest session and we checked for 
setting it at first time.

Regards,
Pierre


-- 
Pierre Morel
IBM Lab Boeblingen

  parent reply	other threads:[~2021-09-09  9:03 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-03  8:26 [PATCH v3 0/3] s390x: KVM: CPU Topology Pierre Morel
2021-08-03  8:26 ` [PATCH v3 1/3] s390x: KVM: accept STSI for CPU topology information Pierre Morel
2021-08-31 13:59   ` David Hildenbrand
2021-09-01  9:43     ` Pierre Morel
2021-09-06 18:14       ` David Hildenbrand
2021-09-07 10:11         ` Pierre Morel
2021-08-03  8:26 ` [PATCH v3 2/3] s390x: KVM: Implementation of Multiprocessor Topology-Change-Report Pierre Morel
2021-08-31 14:03   ` David Hildenbrand
2021-09-01  9:46     ` Pierre Morel
2021-09-06 18:37   ` David Hildenbrand
2021-09-07 10:24     ` Pierre Morel
2021-09-08  7:04       ` Christian Borntraeger
2021-09-08 12:00         ` Pierre Morel
2021-09-08 12:01           ` Christian Borntraeger
2021-09-08 12:52             ` Pierre Morel
2021-09-07 12:28     ` Pierre Morel
2021-09-08  7:07       ` Christian Borntraeger
2021-09-08 13:09         ` Pierre Morel
2021-09-08 13:16           ` Christian Borntraeger
2021-09-08 14:17             ` Pierre Morel
2021-09-09  9:03     ` Pierre Morel [this message]
2021-08-03  8:26 ` [PATCH v3 3/3] s390x: optimization of the check for CPU topology change Pierre Morel
2021-08-03  8:42   ` Heiko Carstens
2021-08-03  8:57     ` Pierre Morel
2021-08-03  9:28       ` Pierre Morel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8b30dd8b-45f6-c04f-a23a-2a4477e21938@linux.ibm.com \
    --to=pmorel@linux.ibm.com \
    --cc=borntraeger@de.ibm.com \
    --cc=cohuck@redhat.com \
    --cc=david@redhat.com \
    --cc=frankja@linux.ibm.com \
    --cc=gor@linux.ibm.com \
    --cc=hca@linux.ibm.com \
    --cc=imbrenda@linux.ibm.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-s390@vger.kernel.org \
    --cc=thuth@redhat.com \
    --subject='Re: [PATCH v3 2/3] s390x: KVM: Implementation of Multiprocessor Topology-Change-Report' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).