Re: [PATCH v2] scsi: core: Fix hang of freezing queue between blocking and running device

[Li Jinlin <lijinlin3@huawei.com>]

On 2021/8/9 22:13, Li Jinlin wrote:
> From: Li Jinlin <lijinlin3@huawei.com>
> 
> We found a hang issue, the test steps are as follows:
>   1. blocking device via scsi_device_set_state()
>   2. dd if=/dev/sda of=/mnt/t.log bs=1M count=10
>   3. echo none > /sys/block/sda/queue/scheduler
>   4. echo "running" >/sys/block/sda/device/state
> 
> Step 3 and 4 should finish this work after step 4, but they hangs.
> 
>   CPU#0               CPU#1                CPU#2
>   ---------------     ----------------     ----------------
>                                            Step 1: blocking device
> 
>                                            Step 2: dd xxxx
>                                                   ^^^^^^ get request
>                                                          q_usage_counter++
> 
>                       Step 3: switching scheculer
>                       elv_iosched_store
>                         elevator_switch
>                           blk_mq_freeze_queue
>                             blk_freeze_queue
>                               > blk_freeze_queue_start
>                                 ^^^^^^ mq_freeze_depth++
> 
>                               > blk_mq_run_hw_queues
>                                 ^^^^^^ can't run queue when dev blocked
> 
>                               > blk_mq_freeze_queue_wait
>                                 ^^^^^^ Hang here!!!
>                                        wait q_usage_counter==0
> 
>   Step 4: running device
>   store_state_field
>     scsi_rescan_device
>       scsi_attach_vpd
>         scsi_vpd_inquiry
>           __scsi_execute
>             blk_get_request
>               blk_mq_alloc_request
>                 blk_queue_enter
>                 ^^^^^^ Hang here!!!
>                        wait mq_freeze_depth==0
> 
>     blk_mq_run_hw_queues
>     ^^^^^^ dispatch IO, q_usage_counter will reduce to zero
> 
>                             blk_mq_unfreeze_queue
>                             ^^^^^ mq_freeze_depth--
> 
> Step 3 and 4 wait for each other.
> 
> To fix this, we need to run queue before rescanning device when the device
> state changes to SDEV_RUNNING.
> 
> Fixes: f0f82e2476f6 ("scsi: core: Fix capacity set to zero after offlinining device")
> Signed-off-by: Li Jinlin <lijinlin3@huawei.com>
> Signed-off-by: Qiu Laibin <qiulaibin@huawei.com>
> ---
> changes since v1 send with Message-ID:
> 20210805143231.1713299-1-lijinlin3@huawei.com
> 
>  - Modify the subject to make it distinct
>  - Modify the message to fix typo and make it distinct
>  - Reduce the number of SOB
> 
>  drivers/scsi/scsi_sysfs.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
> index c3a710bceba0..aa701582c950 100644
> --- a/drivers/scsi/scsi_sysfs.c
> +++ b/drivers/scsi/scsi_sysfs.c
> @@ -809,12 +809,12 @@ store_state_field(struct device *dev, struct device_attribute *attr,
>  	ret = scsi_device_set_state(sdev, state);
>  	/*
>  	 * If the device state changes to SDEV_RUNNING, we need to
> -	 * rescan the device to revalidate it, and run the queue to
> -	 * avoid I/O hang.
> +	 * run the queue to avoid I/O hang, and rescan the device
> +	 * to revalidate it.
>  	 */
>  	if (ret == 0 && state == SDEV_RUNNING) {
> -		scsi_rescan_device(dev);
>  		blk_mq_run_hw_queues(sdev->request_queue, true);
> +		scsi_rescan_device(dev);
>  	}
>  	mutex_unlock(&sdev->state_mutex);
>  
> 

Ping.

Thanks,
Li Jinlin