LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Sameer Pujar <firstname.lastname@example.org>
To: "Pierre-Louis Bossart" <email@example.com>,
"Péter Ujfalusi" <firstname.lastname@example.org>,
email@example.com, firstname.lastname@example.org, email@example.com,
firstname.lastname@example.org, email@example.com, firstname.lastname@example.org,
Cc: <email@example.com>, <firstname.lastname@example.org>,
Subject: Re: [PATCH 01/13] ASoC: soc-pcm: Don't reconnect an already active BE
Date: Thu, 30 Sep 2021 13:27:01 +0530 [thread overview]
Message-ID: <email@example.com> (raw)
On 9/29/2021 8:22 PM, Pierre-Louis Bossart wrote:
>>>> But in addition we'd need to agree on what an 'active BE' is. Why can't
>>>> we connect a second stream while the first one is already in HW_PARAMS
>>>> or PAUSED or STOP? It's perfectly legal in ALSA/ASoC to have multiple
>>>> HW_PARAMS calls, and when we reach STOP we have to do a prepare again.
>>>> And more fundamentally, the ability to add a second FE on a 'active' BE
>>>> in START state is a basic requirement for a mixer, e.g. to play a
>>>> notification on one FE while listening to music on another. What needs
>>>> to happen is only to make sure that the FE and BE are compatible in
>>>> terms of HW_PARAMS and not sending a second TRIGGER_STOP, only checking
>>>> the BE NEW or CLOSE state is way too restrictive.
>>> Sorry for the trouble to your system.
>>> Idea was to avoid reconfiguration of the same BE DAI again, but not to
>>> stop the provision to add a subsequent FE. In fact I had tested mixing
>>> of streams coming from 10 different FEs.
> Can you describe the sequence that you used to start them? That may be
> useful to understand the criteria you used?
I have something like this:
FE1 --> Crossbar -> Mixer Input1 |
FE2 --> Crossbar -> Mixer Input2 |
... | --> Mixer Output -->
FE10 --> Crossbar -> Mixer Input10 |
All these FEs are started one after the other. This is an example of
10x1. Similarly we can have 2x1, 3x1 etc.,
In our system, the crossbar  and mixer  are separate ASoC
components. Basically audio paths consist of a group of ASoC components
which are connected back to back.
> I don't fully understand the notion of mixer input DAI, in our case we
> have a bunch of PCM devices connected to a mixer. The mixer is not
> directly connected to a DAI.
Please see above mixer example. Since mixer is a separate ASoC
component, it exposes 10 inputs (or DAIs) and outputs. Originally what I
wanted to do was, for subsequent FE runs (FE2, FE3 ...) mixer output
need not be configured again and again.
>> The problem as I see is that with this patch one can not connect a new
>> FE to a BE which is _not_ in NEW or CLOSE state.
>> The FE and BE needs to be connected to have DPCM working and this patch
>> makes the code to skip the dpcm_be_connect().
>> Consider this simple setup:
>> FE1 -->|
>> | --> BE -->
>> FE2- ->|
>> First we start FE1, dpcm_be_connect(FE1, BE, stream) is made.
>> Later FE2 is started but dpcm_be_connect(FE2, BE, stream) would be not
>> made because BE is no longer in NEW/CLOSE state.
> I share Peter's analysis, there cannot be any restrictions on
> connections - at any time. A mixer input might become active and be
> added to the mix. We might have a temporary lock to delay new
> connections but cannot not reject them outright based on BE state.
Yes, I understand how this affects a system like yours. As per mixer
example above, in our case subsequent FEs always find BE from Crossbar.
That is why I don't see similar error.
>>> I am just
>>> curious to know, if originally you were reconfiguring the BE DAI again
>>> with same parameters (for a second FE) or some additional configuration
>>> is done?
> That's a different question - and a good one.
> In the case of a mixer, the propagation of hw_params is a broken
> concept. It leads to the first FE configuring the BE to define its
> preferred parameters, e.g. S16_LE format. If later on a second FE is
> started which could play S24_LE, the mixer and BE are already configured
> to a lower resolution. A mixer should really have its own parameters and
> be the start of a new 'domain' - as Lars described it several years ago
> at the audio miniconference.
Propagation is one of the problems we want to address and require help
from DPCM experts. But the scenario you mentioned is a special case
which need not be supported, because mixer can operate in one
configuration at a given time and subsequent FEs should agree to the
already running configuration. However mixer should support both S16_LE
and S24_LE (whenever possible), but not simultaneously. At least this is
the expecation from our systems. Yes mixer may require fixup of a
specific config (we earlier had proposed mixer controls to configure
mixer parameters, but the idea was disliked), but propagation may help
avoid fixing up everywhere in the audio path where it is not really
required. But I don't know how this can be done at the moment.
> For now, the only restriction that we could enforce is that the BE
> cannot be reconfigured after the prepare step.
> Note that our DAIs tolerate multiple calls to hw_params. If you have a
> case where the hw_params allocates resources, maybe you should consider
> moving that allocation to the prepare step, or free them if you detect a
> reconfiguration. That would be something needed even outside of the DPCM
> scope. Similarly you need to support the case where the DAI hw_free is
> called without hw_params ever being called, it's a known sequence that
> can happen if the FE hw-params fails.
Currently this does not seem to be a problem for us. Patch was to avoid
reconfiguration which was felt to be redundant for our system.
>>>> I can send a revert with the explanations in the commit message if there
>>>> is a consensus that this patch needs to be revisited.
>>> May be this can be revisited since it appears to be a critical problem
>>> for your system. But I hope this discussion can be alive on following
>>> points for a better fix.
>>> 1. The original issue at my end was not just a configuration redundancy.
>>> I realize now that with more stream addition following error print is seen.
>>> "ASoC: too many users playback at open 4"
>>> This is because the max DPCM users is capped at 8. Increasing this
>>> may help (need to see what number is better), but does not address the
>>> redundancy problem.
> we haven't used more than 2 users, but it's already broken at 2 with
> race conditions left and right. I am really surprised you managed to
> have more than 2 without hitting inconsistent states - our automated
> play/stop/pause monkey tests reliably break DPCM in less than 20s.
I am not sure what is the exact difference, may be DPCM usage in our
case is different from what you have. I have mixer tests for different
combinations (2x1, 3x1 ...), which seem to pass. In general, we want to
have path like this.
FE -> BE1 -> BE2 -> ... -> BEx
Each BEx could be a mixer, resampler etc., Currently DPCM core sees this
as multiple BEs for a given FE and that is why multiple "users" are
In the interim, may be we can have following patch to keep both systems
working and keep the discussion going to address the oustanding
diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index ab25f99..0fbab50 100644
@@ -1395,7 +1395,13 @@ static int dpcm_add_paths(struct
snd_soc_pcm_runtime *fe, int stream,
if (!fe->dpcm[stream].runtime && !fe->fe_compr)
- if ((be->dpcm[stream].state != SND_SOC_DPCM_STATE_NEW) &&
+ * Filter for systems with 'component_chaining' enabled.
+ * This helps to avoid unnecessary re-configuration of an
+ * already active BE on such systems.
+ if (fe->card->component_chaining &&
+ (be->dpcm[stream].state != SND_SOC_DPCM_STATE_NEW) &&
(be->dpcm[stream].state != SND_SOC_DPCM_STATE_CLOSE))
>>> 2. If reconfiguration of the same BE is not necessary for a subsequent
>>> FE run, shouldn't we avoid the reconfig itself and somehow avoid FE
>> I'm not sure, but it might be possible to just skip the
>> dpcm_set_be_update_state(be, stream, SND_SOC_DPCM_UPDATE_BE);
>> call at the end of the loop, but the question is under which condition?
>> Can a BE asked to be reconfigured when STOP/OPEN/HW_PARAMS?
>> Skipping the connect does not sound right for a new FE-BE connection.
> The reconfiguration is one problem, but what also happens is that the BE
> dailink will see multiple triggers. I've been playing with refcounts to
> force consistency and make sure there is only one TRIGGER_START send to
> the dailink, and conversely there are cases where the TRIGGER_STOP is
> never sent...
Just a thought. FE links have dummy codec DAI and core wants to find a
real BE when FE is started. May be don't fail a FE when no back end DAI
is found (and/or find if the same BE is already connected to some FE)
and the above problem becomes simpler?
next prev parent reply other threads:[~2021-09-30 7:57 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-27 9:33 [PATCH 00/13] Extend AHUB audio support for Tegra210 and later Sameer Pujar
2021-08-27 9:33 ` [PATCH 01/13] ASoC: soc-pcm: Don't reconnect an already active BE Sameer Pujar
2021-09-28 21:25 ` Pierre-Louis Bossart
2021-09-29 7:43 ` Sameer Pujar
[not found] ` <firstname.lastname@example.org>
2021-09-29 14:52 ` Pierre-Louis Bossart
2021-09-30 7:57 ` Sameer Pujar [this message]
2021-09-30 14:34 ` Pierre-Louis Bossart
2021-09-30 15:35 ` Sameer Pujar
2021-09-30 16:13 ` Pierre-Louis Bossart
2021-09-30 19:00 ` Pierre-Louis Bossart
2021-10-04 4:38 ` Sameer Pujar
2021-08-27 9:33 ` [PATCH 02/13] ASoC: simple-card-utils: Increase maximum DAI links limit to 512 Sameer Pujar
2021-08-27 9:33 ` [PATCH 03/13] ASoC: audio-graph: Fixup CPU endpoint hw_params in a BE<->BE link Sameer Pujar
2021-08-27 9:33 ` [PATCH 04/13] ASoC: dt-bindings: tegra: Few more Tegra210 AHUB modules Sameer Pujar
2021-08-31 20:21 ` Rob Herring
2021-09-01 7:09 ` Sameer Pujar
2021-08-27 9:33 ` [PATCH 05/13] ASoC: tegra: Add routes for few " Sameer Pujar
2021-08-27 9:33 ` [PATCH 06/13] ASoC: tegra: Add Tegra210 based MVC driver Sameer Pujar
2021-09-03 18:13 ` Mark Brown
[not found] ` <email@example.com>
[not found] ` <firstname.lastname@example.org>
2021-09-09 14:20 ` Mark Brown
[not found] ` <email@example.com>
2021-09-13 14:23 ` Mark Brown
2021-08-27 9:33 ` [PATCH 07/13] ASoC: tegra: Add Tegra210 based SFC driver Sameer Pujar
2021-08-27 9:33 ` [PATCH 08/13] ASoC: tegra: Add Tegra210 based AMX driver Sameer Pujar
2021-08-27 9:33 ` [PATCH 09/13] ASoC: tegra: Add Tegra210 based ADX driver Sameer Pujar
2021-08-27 9:33 ` [PATCH 10/13] ASoC: tegra: Add Tegra210 based Mixer driver Sameer Pujar
2021-08-27 9:33 ` [PATCH 11/13] arm64: defconfig: Enable few Tegra210 based AHUB drivers Sameer Pujar
2021-08-27 9:33 ` [PATCH 12/13] arm64: tegra: Add few AHUB devices for Tegra210 and later Sameer Pujar
2021-08-27 9:33 ` [PATCH 13/13] arm64: tegra: Extend APE audio support on Jetson platforms Sameer Pujar
2021-09-08 4:56 ` [PATCH 00/13] Extend AHUB audio support for Tegra210 and later Sameer Pujar
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--subject='Re: [PATCH 01/13] ASoC: soc-pcm: Don'\''t reconnect an already active BE' \
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).