LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: "Türk, Jan" <Jan.Tuerk@emtrion.de>
To: "'Shawn Guo'" <shawnguo@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	David Airlie <airlied@linux.ie>,
	Sascha Hauer <kernel@pengutronix.de>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	Russell King <linux@armlinux.org.uk>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"dri-devel@lists.freedesktop.org"
	<dri-devel@lists.freedesktop.org>,
	LinuxArmKernelMailingListe <linux-arm-kernel@lists.infradead.org>
Subject: AW: [PATCH v3 5/6] ARM: dts: Add support for emtrion emCON-MX6 series
Date: Tue, 24 Apr 2018 10:32:07 +0200	[thread overview]
Message-ID: <95F51F4B902CAC40AF459205F6322F01B83109E5B1@BMK019S01.emtrion.local> (raw)
In-Reply-To: <20180423084454.GZ25429@dragon>

> -----Ursprüngliche Nachricht-----
> Von: Shawn Guo Gesendet: Montag, 23. April 2018 10:45
> Re: [PATCH v3 5/6] ARM: dts: Add support for emtrion emCON-MX6 series
> 
> On Fri, Apr 20, 2018 at 02:50:52PM +0200, jan.tuerk@emtrion.com wrote:
> > From: Jan Tuerk <jan.tuerk@emtrion.com>
> >
> > This patch adds support for the emtrion GmbH emCON-MX6 modules.
> > They are available with imx.6 Solo, Dual-Lite, Dual and Quad equipped
> > with Memory from 512MB to 2GB (configured by U-Boot).
> >
> > Our default developer-Kit ships with the Avari baseboard and the EDT
> > ETM0700G0BDH6 Display (imx6[q|dl]-emcon-avari).
> >
> > The devicetree is split into the common part providing all module
> > components and the basic support for all SoC versions
> > (imx6qdl-emcon.dtsi) and parts which are i.mx6 S|DL and D|Q relevant.
> > Finally the support for the avari baseboard in the developer-kit
> > configuration is provided by the emcon-avari dts files.
> >
> > Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com>
> > ---
> >  Documentation/devicetree/bindings/arm/emtrion.txt |  13 +
> 
> It's better to have a separate patch for bindings doc, which needs to be
> acknowledged by DT maintainers.

I can change that, but nobody complained in the first 2 revisions of the patch. 
Also I though having the documentation is required for merging new bindings?

> 
> >  arch/arm/boot/dts/Makefile                        |   2 +
> >  arch/arm/boot/dts/imx6dl-emcon-avari.dts          | 224 ++++++
> >  arch/arm/boot/dts/imx6dl-emcon.dtsi               |  27 +
> >  arch/arm/boot/dts/imx6q-emcon-avari.dts           | 224 ++++++
> >  arch/arm/boot/dts/imx6q-emcon.dtsi                |  27 +
> >  arch/arm/boot/dts/imx6qdl-emcon.dtsi              | 838
> ++++++++++++++++++++++
> >  7 files changed, 1355 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/arm/emtrion.txt
> >  create mode 100644 arch/arm/boot/dts/imx6dl-emcon-avari.dts
> >  create mode 100644 arch/arm/boot/dts/imx6dl-emcon.dtsi
> >  create mode 100644 arch/arm/boot/dts/imx6q-emcon-avari.dts
> >  create mode 100644 arch/arm/boot/dts/imx6q-emcon.dtsi
> >  create mode 100644 arch/arm/boot/dts/imx6qdl-emcon.dtsi
> >
> > diff --git a/Documentation/devicetree/bindings/arm/emtrion.txt
> > b/Documentation/devicetree/bindings/arm/emtrion.txt
> > new file mode 100644
> > index 000000000000..3ff6c6c2034d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/emtrion.txt
> > @@ -0,0 +1,13 @@
> > +Emtrion Devicetree Bindings
> > +===========================
> > +
> > +emCON Series:
[..]
> > index 000000000000..2344fb9498e3
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/imx6dl-emcon-avari.dts
> > @@ -0,0 +1,224 @@
> > +// SPDX-License-Identifier: (GPL-2.0 or MIT)
> > +/* Copyright (C) 2018 emtrion GmbH
> > + * Author: Jan Tuerk  <jan.tuerk@emtrion.com>  */
> 
> /*
>  * Copyright ...
>  */
Ack
> > +
> > +/dts-v1/;
> > +#include "imx6dl.dtsi"
> > +#include "imx6qdl-emcon.dtsi"
> > +#include "imx6dl-emcon.dtsi" /*Include camera2 pinmux*/
> 
> /* bla bla */
> 
> > +
> > +/ {
> > +	model = "emtrion SoM emCON-MX6 Solo/Dual-Lite Avari";
> > +	compatible = "emtrion,emcon-mx6-avari", "fsl,imx6dl";
> > +
> > +	aliases {
> > +		mmc0 = &usdhc3;
> > +		mmc2 = &usdhc1;
> > +		mmc1 = &usdhc2;
> > +		mmc3 = &usdhc4;
> > +	};
> > +
> > +	chosen {
> > +		stdout-path = <&uart1>;
> > +	};
> > +
> > +	memory {
> 
> The unit-address is missing.

Ack

> 
> > +		reg = <0x10000000 0x40000000>;
> > +	};
> > +
> > +	supplies {
> > +		compatible = "simple-bus";
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> 
> DT maintainers do not like this fake container node.  Please put the
> fixed regulator nodes directly under root with a unique name like below.

Ok I'll change this
> 
> 	reg_xxx: regulator-xxx {
> 		...
> 	};
> 
> > +
> > +		wallplug5p0: supply@0 {
> > +			compatible = "regulator-fixed";
> > +			reg = <0>;
> > +			regulator-name = "WALL-PLUG";
> > +			regulator-min-microvolt = <5000000>;
> > +			regulator-max-microvolt = <5000000>;
> > +			regulator-always-on;
> > +			regulator-boot-on;
> > +		};
[...]
> > +		reg_usb_otg: otgvbus@3 {
> > +			compatible = "regulator-fixed";
> > +			reg = <3>;
> > +			vin-supply = <&wallplug5p0>;
> > +			regulator-name = "OTG_VBUS";
> > +			regulator-min-microvolt = <5000000>;
> > +			regulator-max-microvolt = <5000000>;
> > +			gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
> > +			regulator-always-on;
> > +		};
> > +
> > +	};
> > +
> > +
> > +	sndosc: 12MHZosc {
> 
> 	clock-xxx {
> 		...
> 	};

ok
> 
> > +		compatible = "fixed-clock";
> > +		#clock-cells = <0>;
> > +		clock-frequency  = <12000000>;
> > +	};
> > +
> > +	sound {
> > +		compatible = "fsl,imx-audio-sgtl5000";
> > +		model = "emCON-avari-sgtl5000";
> > +		ssi-controller = <&ssi2>;
> > +		audio-codec = <&sgtl5000>;
> > +		audio-routing =
> > +			"Headphone Jack", "HP_OUT";
> > +		mux-int-port = <2>;
> > +		mux-ext-port = <3>;
> > +	};
> > +
> > +};
> > +
> > +
> 
> One newline is good enough.
ack
> 
> > +&iomuxc {
> > +	pinctrl-names = "default";
> > +	/*Unused emCON-MX6 outputs on AVARI*/
> > +	pinctrl-0 = <
> > +				 &pinctrl_emcon_gpio1
> &pinctrl_emcon_gpio2
> > +				 &pinctrl_emcon_gpio3
> &pinctrl_emcon_gpio5
> > +				 &pinctrl_emcon_gpio6
> &pinctrl_emcon_gpio7
> > +				 &pinctrl_emcon_gpio8
> &pinctrl_emcon_irq_a
> > +				 &pinctrl_emcon_irq_b &pinctrl_emcon_irq_c
> > +				 &pinctrl_emcon_irq_pwr &pinctrl_nor_flash
> > +				 &pinctrl_usdhc2
> > +				 &pinctrl_spdif_out     &pinctrl_spdif_in
> > +				 &pinctrl_cpi1          &pinctrl_cpi2
> > +				>;
> 
> Only pins without clear consumer should be put into hog group.  Also the
> indent seems broken.

Yes the consumer is currently "not-defined" on the Avari baseboard, as those pins are signals on the emCON Interface.
I've added them there to force a basic initialization matching the Interfaces specified function blocks in the SoC.  
I'll rework the indent as well.

> 
> > +};
> > +
> > +&audmux {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_audmux>;
> > +	status = "okay";
> > +};
> > +
> > +
> > +
> 
> One newline is good enough.  Also, please try to sort these labelled
> nodes alphabetically.
> 
> > +&i2c3 {
> > +	clock-frequency = <100000>;
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_i2c3>;
> > +	status = "okay";
> > +
> > +	sgtl5000: audio-codec@a {
> > +		compatible = "fsl,sgtl5000";
> > +		reg = <0x0a>;
> > +		clocks = <&sndosc>;
> > +		VDDA-supply = <&base3p3>;
> > +		VDDIO-supply = <&base3p3>;
> 
> #sound-dai-cells is missing.
yes, I'll change that
> 
> > +	};
> > +
> > +	boardID: pca8754a@3a {
> 
> Please find a more generic node name for it.

you mean boardID@3a?
This chip identifies the baseboard type for the bootloader.

> 
> > +		compatible = "nxp,pca8574";
> > +		reg = <0x3a>;
> > +		gpio-controller;
> > +		#gpio-cells = <1>;
> > +	};
> > +
> > +	captouch: touchscreen@38 {
> > +		compatible = "edt,edt-ft5406";
> > +		reg = <0x38>;
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&pinctrl_irq_touch2 &pinctrl_emcon_gpio4>;
> > +		interrupt-parent = <&gpio6>;
> > +		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
> > +		wake-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
> > +		wakeup-source;
> > +		status = "okay";
> 
> The "okay" status is only needed to flip the default "disabled" device.
> 
> > +	};
[...]
> +};
> diff --git a/arch/arm/boot/dts/imx6q-emcon-avari.dts b/arch/arm/boot/dts/imx6q-emcon-avari.dts
> new file mode 100644
> index 000000000000..0c85b5ee011c
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-emcon-avari.dts
There are so many things duplicated between imx6dl-emcon-avari.dts and
imx6q-emcon-avari.dts.  Can you do something to avoid that?

I could try to merge them into a "common", but it will be an additional file.

> @@ -0,0 +1,224 @@
> +// SPDX-License-Identifier: (GPL-2.0 or MIT)
> +/* Copyright (C) 2018 emtrion GmbH
> + * Author: Jan Tuerk  <jan.tuerk@emtrion.com>
> + */
> +
> +/dts-v1/;
> +#include "imx6q.dtsi"
> +#include "imx6qdl-emcon.dtsi"
> +#include "imx6q-emcon.dtsi" /*Include camera2 pinmux*/
> +
> +/ {
> +	model = "emtrion SoM emCON-MX6 Dual/Quad on Avari";
> +	compatible = "emtrion,emcon-mx6-avari", "fsl,imx6q";
> +
> +	aliases {
> +		mmc0 = &usdhc3;
> +		mmc2 = &usdhc1;
> +		mmc1 = &usdhc2;
> +		mmc3 = &usdhc4;
> +	};
[...]
> > +};
> > +
> > +&ssi2 {
> > +	pwm_fan: pwm-fan {
> > +		compatible = "pwm-fan";
> > +		cooling-min-state = <0>;
> > +		cooling-max-state = <4>;
> > +		#cooling-cells = <2>;
> > +		pwms = <&pwm4 0 50000>;
> > +		cooling-levels = <0 64 127 191 255>;
> > +		status = "disabled";
> > +	};
> > +
> > +	rgb_encoder: disp0 {
> 
> s/disp0/display
Ack

> 
> > +		compatible = "fsl,imx-parallel-display";
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&pinctrl_rgb24_display>;
> > +		status = "disabled";
> > +
> > +		port@0 {
> > +			reg = <0>;
> 
> Have a newline between property list and child node.
Ok
> 
> > +			rgb_encoder_in: endpoint {
> > +				remote-endpoint = <&ipu1_di0_disp0>;
> > +			};
> > +		};
> > +
> > +		port@1 {
> > +			reg = <1>;
> > +			rgb_encoder_out: endpoint {
> > +				remote-endpoint = <&rgb_panel_in>;
> > +			};
> > +		};
> > +	};
> > +
> > +	rgb_panel: panel {
> > +		backlight = <&rgb_backlight>;
> > +		power-supply = <&reg_parallel_disp>;
> > +		port {
> > +			rgb_panel_in: endpoint {
> > +				remote-endpoint = <&rgb_encoder_out>;
> > +			};
> > +		};
> > +	};
> > +
> > +	rgb_backlight: rgb-backlight {
> > +		compatible = "pwm-backlight";
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&pinctrl_rgb_bl>;
> > +		enable-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
> > +		pwms = <&pwm3 0 5000000>;
> > +		brightness-levels = <250 176 160 144 128 112
> > +							96 80 64 48 32 16 8 1
> > +							>;
> 
> Broken indent.
ack
> 
> > +		default-brightness-level = <13>;
> > +		status = "okay";
> > +	};
> > +
> > +	lvds_backlight: lvds-backlight {
> > +		compatible = "pwm-backlight";
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&pinctrl_lvds_bl>;
> > +		enable-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
> > +		pwms = <&pwm1 0 50000>;
> > +		brightness-levels = <0 4 8 16 32 64 80 96 112
> > +							128 144 160 176 250
> > +							>;
> > +		default-brightness-level = <13>;
> > +		status = "okay";
> > +	};
> > +};
> > +
> > +
> > +&iomuxc {
> > +
> > +	pinctrl_secure: securegrp {
> 
> Unused?

in this configuration, yes. 
The imx6qdl-emcon.dtsi defines all pinctrl values for the Interfaces defined in the emCON specification.

> 
> > +		fsl,pins = <
> > +			MX6QDL_PAD_GPIO_18__GPIO7_IO13
> 		0x1b0b1
> > +		>;
> > +	};
> > +
> > +	pinctrl_uart1: uart1grp {
> > +		fsl,pins = <
> > +			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA
> 	0x1b0b1
> > +			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA
> 	0x1b0b1
> > +		>;
> > +	};
> > +
[...]
> > +
> > +	pinctrl_uart5: uart5grp {
> > +		fsl,pins = <
> > +			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA
> 	0x1b0b1
> > +			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA
> 	0x1b0b1
> > +		>;
> > +	};
> > +
> > +	pinctrl_emcon_gpio1: emcongpio1 {
> > +		fsl,pins = <
> > +			MX6QDL_PAD_NANDF_D0__GPIO2_IO00
> 		0x0b0b1
> > +		>;
> > +	};
> 
> Try to keep these pinctrl entries alphabetically sorted.
If this helps to merge it, I'll change that
> 
> > +
> > +	pinctrl_emcon_gpio2: emcongpio2 {
> > +		fsl,pins = <
> > +			MX6QDL_PAD_NANDF_D1__GPIO2_IO01
> 		0x0b0b1
> > +		>;
> > +	};
> > +
[...]
> > +
> > +		wdt {
> 
> s/wdt/watchdog
Ack.

> 
> > +			compatible = "dlg,da9063-watchdog";
> > +			timeout-sec = <0>;
> > +		};
> > +
> > +		regulators {
> > +			vddcore_reg: bcore1 {
> > +				regulator-min-microvolt = <1100000>;
> > +
[...]
> > +/*******Disabled HW following***********/
> > +
> > +
> > +&weim {
> > +	status = "disabled";
> > +};
> 
> Isn't weim disabled by default?

Yes, the patch was originally done for our internal "vendor" kernel, which was based on 4.9 where it was enabled by default.
I remove the node, as it became obsolete now.
> 
> Shawn
> 
> > +
> > +&snvs_rtc {
> > +	status = "disabled";
> > +};
> > --
> > 2.11.0
> >

  reply	other threads:[~2018-04-24  8:32 UTC|newest]

Thread overview: 74+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-23 12:55 [PATCH 0/5] Add basic support for emtrion emCON-MX6 modules Jan Tuerk
2017-11-23 12:55 ` [PATCH 1/5] drm/panel: Add support for the EDT ETM0700G0BDH6 Jan Tuerk
2017-11-23 15:08   ` Fabio Estevam
2017-11-23 15:18     ` AW: " Türk, Jan
2017-11-24 14:21       ` Fabio Estevam
2017-11-24 14:59         ` AW: " Türk, Jan
2017-11-26 19:10   ` Rob Herring
2017-11-23 12:55 ` [PATCH 2/5] dt-bindings: Add vendor prefix for emtrion GmbH Jan Tuerk
2017-11-23 12:58   ` Andreas Färber
2017-11-26 19:12   ` Rob Herring
2017-11-23 12:55 ` [PATCH 3/5] ARM: dts: imx: Add an cpu0 label for imx6dl devices Jan Tuerk
2017-11-23 13:00   ` Andreas Färber
2017-11-23 12:55 ` [PATCH 4/5] ARM: dts: Add support for emtrion emCON-MX6 series Jan Tuerk
2017-11-26 19:24   ` Rob Herring
2017-11-28 10:52     ` AW: " Türk, Jan
2017-11-23 12:55 ` [PATCH 5/5] ARM: imx_v6_v7_defconfig: Enable DA0963 PMIC support Jan Tuerk
2017-12-20 13:47 ` [PATCH v2 0/5] Add basic support for emtrion emCON-MX6 modules jan.tuerk
2017-12-20 13:47   ` [PATCH v2 1/5] drm/panel: Add support for the EDT ETM0700G0BDH6 jan.tuerk
2017-12-21 22:59     ` Rob Herring
2018-04-20 12:50     ` [PATCH v3 0/6] Add basic support for emtrion emCON-MX6 modules jan.tuerk
2018-04-20 12:50       ` [PATCH v3 1/6] drm/panel: Add support for the EDT ETM0700G0BDH6 jan.tuerk
2018-04-20 12:50       ` [PATCH v3 2/6] drm/panel: Add support for the EDT ETM0700G0EDH6 jan.tuerk
2018-04-20 12:50       ` [PATCH v3 3/6] dt-bindings: display: Document the EDT et* displays in one file jan.tuerk
2018-04-20 12:50       ` [PATCH v3 4/6] ARM: dts: imx: Add an cpu0 label for imx6dl devices jan.tuerk
2018-04-20 12:50       ` [PATCH v3 5/6] ARM: dts: Add support for emtrion emCON-MX6 series jan.tuerk
2018-04-23  8:44         ` Shawn Guo
2018-04-24  8:32           ` Türk, Jan [this message]
2018-04-26 13:46             ` Rob Herring
2018-04-20 12:50       ` [PATCH v3 6/6] ARM: imx_v6_v7_defconfig: Enable DA0963 PMIC support jan.tuerk
2018-04-27 13:24       ` [PATCH v4 0/7] Add basic support for emtrion emCON-MX6 modules jan.tuerk
2018-04-27 13:24         ` [PATCH v4 1/7] dt-bindings: display: Document the EDT et* displays in one file jan.tuerk
2018-04-27 14:35           ` Rob Herring
2018-06-19  9:55           ` [PATCH 1/3] " jan.tuerk
2018-06-19  9:55             ` [PATCH 2/3] drm/panel: Add support for the EDT ETM0700G0BDH6 jan.tuerk
2018-06-19  9:55             ` [PATCH 3/3] drm/panel: Add support for the EDT ETM0700G0EDH6 jan.tuerk
2018-07-09 17:27             ` [PATCH 1/3] dt-bindings: display: Document the EDT et* displays in one file Thierry Reding
2018-04-27 13:24         ` [PATCH v4 2/7] drm/panel: Add support for the EDT ETM0700G0BDH6 jan.tuerk
2018-04-27 13:24         ` [PATCH v4 3/7] drm/panel: Add support for the EDT ETM0700G0EDH6 jan.tuerk
2018-04-27 13:24         ` [PATCH v4 4/7] ARM: dts: imx: Add an cpu0 label for imx6dl devices jan.tuerk
2018-04-27 13:24         ` [PATCH v4 5/7] dt-bindings: arm: Document emtrion emCON-MX6 bindings jan.tuerk
2018-04-27 14:45           ` Rob Herring
2018-04-27 13:24         ` [PATCH v4 6/7] ARM: dts: Add support for emtrion emCON-MX6 series jan.tuerk
2018-04-28  3:12           ` Shawn Guo
2018-05-03 10:00             ` AW: " Türk, Jan
2018-05-04  7:03               ` Shawn Guo
2018-04-27 13:24         ` [PATCH v4 7/7] ARM: imx_v6_v7_defconfig: Enable DA0963 PMIC support jan.tuerk
2018-04-28  2:34         ` [PATCH v4 0/7] Add basic support for emtrion emCON-MX6 modules Shawn Guo
2018-05-03 10:01           ` AW: " Türk, Jan
2018-08-22 15:51         ` [PATCH v5 1/4] ARM: dts: imx: Add an cpu0 label for imx6dl devices Jan Tuerk
2018-08-22 15:51           ` [PATCH v5 2/4] dt-bindings: arm: Document emtrion emCON-MX6 bindings Jan Tuerk
2018-08-22 15:51           ` [PATCH v5 3/4] ARM: dts: Add support for emtrion emCON-MX6 series Jan Tuerk
2018-08-22 15:51           ` [PATCH v5 4/4] ARM: imx_v6_v7_defconfig: Enable DA0963 PMIC support Jan Tuerk
2018-08-22 16:26             ` Fabio Estevam
2018-08-24 13:26           ` [PATCH v6 1/4] ARM: dts: imx: Add an cpu0 label for imx6dl devices Jan Tuerk
2018-08-24 13:26             ` [PATCH v6 2/4] dt-bindings: arm: Document emtrion emCON-MX6 bindings Jan Tuerk
2018-08-28 22:16               ` Rob Herring
2018-08-24 13:26             ` [PATCH v6 3/4] ARM: dts: Add support for emtrion emCON-MX6 series Jan Tuerk
2018-08-27  1:13               ` Shawn Guo
2018-08-24 13:26             ` [PATCH v6 4/4] ARM: imx_v6_v7_defconfig: Enable DA9063 PMIC support Jan Tuerk
2018-08-29 10:07             ` [PATCH v7 1/4] ARM: dts: imx: Add an cpu0 label for imx6dl devices Jan Tuerk
2018-08-29 10:07               ` [PATCH v7 2/4] dt-bindings: arm: Document emtrion emCON-MX6 bindings Jan Tuerk
2018-08-29 12:46                 ` Rob Herring
2018-08-29 10:07               ` [PATCH v7 3/4] ARM: dts: Add support for emtrion emCON-MX6 series Jan Tuerk
2018-08-29 10:08               ` [PATCH v7 4/4] ARM: imx_v6_v7_defconfig: Enable DA9063 PMIC support Jan Tuerk
2018-11-27 15:04               ` [PATCH v8 1/4] ARM: dts: imx: Add an cpu0 label for imx6dl devices Jan Tuerk
2018-11-27 15:04                 ` [PATCH v8 2/4] dt-bindings: arm: Document emtrion emCON-MX6 bindings Jan Tuerk
2018-11-27 15:04                 ` [PATCH v8 3/4] ARM: dts: Add support for emtrion emCON-MX6 series Jan Tuerk
2018-11-27 15:04                 ` [PATCH v8 4/4] ARM: imx_v6_v7_defconfig: Enable DA9063 PMIC support Jan Tuerk
2018-11-28  2:06                 ` [PATCH v8 1/4] ARM: dts: imx: Add an cpu0 label for imx6dl devices Shawn Guo
2017-12-20 13:47   ` [PATCH v2 2/5] dt-bindings: Add vendor prefix for emtrion GmbH jan.tuerk
2017-12-20 13:47   ` [PATCH v2 3/5] ARM: dts: imx: Add an cpu0 label for imx6dl devices jan.tuerk
2017-12-20 13:47   ` [PATCH v2 4/5] ARM: dts: Add support for emtrion emCON-MX6 series jan.tuerk
2017-12-21 23:19     ` Rob Herring
2017-12-20 13:47   ` [PATCH v2 5/5] ARM: imx_v6_v7_defconfig: Enable DA0963 PMIC support jan.tuerk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=95F51F4B902CAC40AF459205F6322F01B83109E5B1@BMK019S01.emtrion.local \
    --to=jan.tuerk@emtrion.de \
    --cc=airlied@linux.ie \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=fabio.estevam@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=thierry.reding@gmail.com \
    --subject='Re: AW: [PATCH v3 5/6] ARM: dts: Add support for emtrion emCON-MX6 series' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).