LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
To: John Syne <john3909@gmail.com>,
Jonathan Cameron <jic23@kernel.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-iio@vger.kernel.org, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org, Barry Song <21cnbao@gmail.com>
Cc: linux-iio@vger.kernel.org, devel@driverdev.osuosl.org,
daniel.baluta@nxp.com, linux-kernel@vger.kernel.org
Subject: [PATCH v3 7/8] staging:iio:ade7854: Rework SPI read function
Date: Fri, 23 Mar 2018 11:27:12 -0300 [thread overview]
Message-ID: <960df20b2a51e6517e9ccef2b5486ee116f35ba4.1521813782.git.rodrigosiqueiramelo@gmail.com> (raw)
In-Reply-To: <cover.1521813782.git.rodrigosiqueiramelo@gmail.com>
Rework read SPI function to reduce the code duplication and centralizes
all the task in a single function.
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
---
Changes in v3:
- Remove the use of defines that not improve the readability
- Replace variable name "bytes" for "bits"
- Update commit message
drivers/staging/iio/meter/ade7854-spi.c | 136 ++++++++------------------------
1 file changed, 33 insertions(+), 103 deletions(-)
diff --git a/drivers/staging/iio/meter/ade7854-spi.c b/drivers/staging/iio/meter/ade7854-spi.c
index be7397042850..ee6e4d166ece 100644
--- a/drivers/staging/iio/meter/ade7854-spi.c
+++ b/drivers/staging/iio/meter/ade7854-spi.c
@@ -67,9 +67,10 @@ static int ade7854_spi_write_reg(struct device *dev,
return ret;
}
-static int ade7854_spi_read_reg_8(struct device *dev,
- u16 reg_address,
- u8 *val)
+static int ade7854_spi_read_reg(struct device *dev,
+ u16 reg_address,
+ u32 *val,
+ int bits)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ade7854_state *st = iio_priv(indio_dev);
@@ -82,7 +83,7 @@ static int ade7854_spi_read_reg_8(struct device *dev,
}, {
.rx_buf = st->rx,
.bits_per_word = 8,
- .len = 1,
+ .len = bits,
}
};
@@ -94,128 +95,57 @@ static int ade7854_spi_read_reg_8(struct device *dev,
ret = spi_sync_transfer(st->spi, xfers, ARRAY_SIZE(xfers));
if (ret) {
- dev_err(&st->spi->dev, "problem when reading 8 bit register 0x%02X",
+ dev_err(&st->spi->dev, "problem when reading register 0x%02X",
reg_address);
- goto error_ret;
+ goto unlock;
+ }
+
+ switch (bits) {
+ case 8:
+ *val = st->rx[0];
+ break;
+ case 16:
+ *val = be16_to_cpup((const __be16 *)st->rx);
+ break;
+ case 24:
+ *val = (st->rx[0] << 16) | (st->rx[1] << 8) | st->rx[2];
+ break;
+ case 32:
+ *val = be32_to_cpup((const __be32 *)st->rx);
+ break;
}
- *val = st->rx[0];
-error_ret:
+unlock:
mutex_unlock(&st->buf_lock);
return ret;
}
+static int ade7854_spi_read_reg_8(struct device *dev,
+ u16 reg_address,
+ u8 *val)
+{
+ return ade7854_spi_read_reg(dev, reg_address, (u32 *)val, 8);
+}
+
static int ade7854_spi_read_reg_16(struct device *dev,
u16 reg_address,
u16 *val)
{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ade7854_state *st = iio_priv(indio_dev);
- int ret;
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .bits_per_word = 8,
- .len = 3,
- }, {
- .rx_buf = st->rx,
- .bits_per_word = 8,
- .len = 2,
- }
- };
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADE7854_READ_REG;
- st->tx[1] = (reg_address >> 8) & 0xFF;
- st->tx[2] = reg_address & 0xFF;
-
- ret = spi_sync_transfer(st->spi, xfers, ARRAY_SIZE(xfers));
- if (ret) {
- dev_err(&st->spi->dev, "problem when reading 16 bit register 0x%02X",
- reg_address);
- goto error_ret;
- }
- *val = be16_to_cpup((const __be16 *)st->rx);
-
-error_ret:
- mutex_unlock(&st->buf_lock);
- return ret;
+ return ade7854_spi_read_reg(dev, reg_address, (u32 *)val, 16);
}
static int ade7854_spi_read_reg_24(struct device *dev,
u16 reg_address,
u32 *val)
{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ade7854_state *st = iio_priv(indio_dev);
- int ret;
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .bits_per_word = 8,
- .len = 3,
- }, {
- .rx_buf = st->rx,
- .bits_per_word = 8,
- .len = 3,
- }
- };
-
- mutex_lock(&st->buf_lock);
-
- st->tx[0] = ADE7854_READ_REG;
- st->tx[1] = (reg_address >> 8) & 0xFF;
- st->tx[2] = reg_address & 0xFF;
-
- ret = spi_sync_transfer(st->spi, xfers, ARRAY_SIZE(xfers));
- if (ret) {
- dev_err(&st->spi->dev, "problem when reading 24 bit register 0x%02X",
- reg_address);
- goto error_ret;
- }
- *val = (st->rx[0] << 16) | (st->rx[1] << 8) | st->rx[2];
-
-error_ret:
- mutex_unlock(&st->buf_lock);
- return ret;
+ return ade7854_spi_read_reg(dev, reg_address, (u32 *)val, 24);
}
static int ade7854_spi_read_reg_32(struct device *dev,
u16 reg_address,
u32 *val)
{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ade7854_state *st = iio_priv(indio_dev);
- int ret;
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .bits_per_word = 8,
- .len = 3,
- }, {
- .rx_buf = st->rx,
- .bits_per_word = 8,
- .len = 4,
- }
- };
-
- mutex_lock(&st->buf_lock);
-
- st->tx[0] = ADE7854_READ_REG;
- st->tx[1] = (reg_address >> 8) & 0xFF;
- st->tx[2] = reg_address & 0xFF;
-
- ret = spi_sync_transfer(st->spi, xfers, ARRAY_SIZE(xfers));
- if (ret) {
- dev_err(&st->spi->dev, "problem when reading 32 bit register 0x%02X",
- reg_address);
- goto error_ret;
- }
- *val = be32_to_cpup((const __be32 *)st->rx);
-
-error_ret:
- mutex_unlock(&st->buf_lock);
- return ret;
+ return ade7854_spi_read_reg(dev, reg_address, (u32 *)val, 32);
}
static int ade7854_spi_probe(struct spi_device *spi)
--
2.16.2
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
next prev parent reply other threads:[~2018-03-23 14:27 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-23 14:21 [PATCH v3 0/8] Cleanup on I2C/SPI code Rodrigo Siqueira
2018-03-23 14:22 ` [PATCH v3 1/8] staging:iio:ade7854: Fix error handling on read/write John Syne
2018-03-24 12:41 ` Jonathan Cameron
2018-03-23 14:25 ` [PATCH v3 2/8] staging:iio:ade7854: Fix the wrong number of bits to read John Syne
2018-03-24 13:23 ` Jonathan Cameron
2018-03-23 14:26 ` [PATCH v3 3/8] staging:iio:ade7854: Rework I2C write function Rodrigo Siqueira
2018-03-24 13:24 ` Jonathan Cameron
2018-03-23 14:26 ` [PATCH v3 4/8] staging:iio:ade7854: Rework SPI " Rodrigo Siqueira
2018-03-24 13:25 ` Jonathan Cameron
2018-03-23 14:26 ` [PATCH v3 5/8] staging:iio:ade7854: Remove write_reg_* duplications Rodrigo Siqueira
2018-03-24 13:26 ` Jonathan Cameron
2018-03-23 14:26 ` [PATCH v3 6/8] staging:iio:ade7854: Rework I2C read function Rodrigo Siqueira
2018-03-24 13:27 ` Jonathan Cameron
2018-03-23 14:27 ` Rodrigo Siqueira [this message]
2018-03-24 13:28 ` [PATCH v3 7/8] staging:iio:ade7854: Rework SPI " Jonathan Cameron
2018-03-23 14:27 ` [PATCH v3 8/8] staging:iio:ade7854: Remove read_reg_* duplications Rodrigo Siqueira
2018-03-24 13:29 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=960df20b2a51e6517e9ccef2b5486ee116f35ba4.1521813782.git.rodrigosiqueiramelo@gmail.com \
--to=rodrigosiqueiramelo@gmail.com \
--cc=21cnbao@gmail.com \
--cc=daniel.baluta@nxp.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=john3909@gmail.com \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--subject='Re: [PATCH v3 7/8] staging:iio:ade7854: Rework SPI read function' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).