Re: [RESEND PATCH v2 3/4] ARM: davinci: add aemif & nand support to da850-lcdk in legacy mode

[Sekhar Nori <nsekhar@ti.com>]

On Wednesday 25 April 2018 02:44 PM, Bartosz Golaszewski wrote:
> 2018-04-17 16:09 GMT+02:00 Sekhar Nori <nsekhar@ti.com>:
>> On Tuesday 17 April 2018 03:59 PM, Bartosz Golaszewski wrote:
>>> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>>
>>> We now have support for aemif & nand from board files. As an example
>>> add support for nand to da850-lcdk in legacy mode.
>>
>> Hawkboard is a separate board of its own, although closely related to
>> LCDK. Lets refer to it as hawkboard itself, instead of "LCDK in legacy
>> mode". So:
>>
>> ARM: davinci: omapl138-hawk: ...
>>
>>>
>>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>> ---
>>>  arch/arm/mach-davinci/board-omapl138-hawk.c | 132 ++++++++++++++++++++
>>>  1 file changed, 132 insertions(+)
>>>
>>> diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
>>> index 6c997c59a3cd..9c3de56b54e4 100644
>>> --- a/arch/arm/mach-davinci/board-omapl138-hawk.c
>>> +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
>>> @@ -16,6 +16,11 @@
>>>  #include <linux/gpio.h>
>>>  #include <linux/gpio/machine.h>
>>>  #include <linux/platform_data/gpio-davinci.h>
>>> +#include <linux/platform_data/ti-aemif.h>
>>> +#include <linux/mtd/rawnand.h>
>>> +#include <linux/mtd/partitions.h>
>>> +#include <linux/platform_data/mtd-davinci.h>
>>> +#include <linux/platform_data/mtd-davinci-aemif.h>
>>>  #include <linux/regulator/machine.h>
>>>
>>>  #include <asm/mach-types.h>
>>> @@ -162,6 +167,129 @@ static __init void omapl138_hawk_mmc_init(void)
>>>       gpiod_remove_lookup_table(&mmc_gpios_table);
>>>  }
>>>
>>> +static struct mtd_partition omapl138_hawk_nandflash_partition[] = {
>>> +     {
>>> +             .name           = "u-boot env",
>>> +             .offset         = 0,
>>> +             .size           = SZ_128K,
>>> +             .mask_flags     = MTD_WRITEABLE,
>>> +      },
>>> +     {
>>> +             .name           = "u-boot",
>>> +             .offset         = MTDPART_OFS_APPEND,
>>> +             .size           = SZ_128K,
>>
>> Can you make it 512K as it is in da850-lcdk.dts ?
>>
>>> +             .mask_flags     = MTD_WRITEABLE,
>>> +     },
>>> +     {
>>> +             .name           = "free space",
>>> +             .offset         = MTDPART_OFS_APPEND,
>>> +             .size           = MTDPART_SIZ_FULL,
>>> +             .mask_flags     = 0,
>>> +     },
>>> +};
>>
>>> +static struct aemif_abus_data omapl138_hawk_aemif_abus_data[] = {
>>> +     {
>>> +             .cs     = 3,
>>> +     }
>>> +};
>>> +
>>> +static struct platform_device omapl138_hawk_aemif_devices[] = {
>>> +     {
>>> +             .name           = "davinci_nand",
>>> +             .id             = 1,
>>
>> Is there a reason for .id to be set to 1 here? Ideally it should be -1,
>> I think since there is a single NAND on the board.
>>
> 
> The davinci nand driver uses pdev->id as the chipselect number. I
> guess this should be in the platform data. I'll send a patch for that.

I remember that now. No need to change that, I think. Just a comment
here would suffice.

Thanks,
Sekhar