RE: [PATCH v2 07/12] pm: at91: the standby mode uses the same sram function as the suspend to memory mode

["Yang, Wenyou" <Wenyou.Yang@atmel.com>]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 1496 bytes --]

Hi Sylvain,

> -----Original Message-----
> From: Sylvain Rochet [mailto:sylvain.rochet@finsecur.com]
> Sent: Monday, January 26, 2015 6:10 PM
> To: Yang, Wenyou
> Cc: Ferre, Nicolas; linux@arm.linux.org.uk; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; alexandre.belloni@free-electrons.com;
> peda@axentia.se
> Subject: Re: [PATCH v2 07/12] pm: at91: the standby mode uses the same sram
> function as the suspend to memory mode
> 
> Hello Wenyou,
> 
> 
> On Mon, Jan 26, 2015 at 05:42:11PM +0800, Wenyou Yang wrote:
> > +static int at91_pm_verify_clocks(suspend_state_t state)
> >  {
> >  	unsigned long scsr;
> >  	int i;
> >
> > +	/* For PM_SUSPEND_STANDBY, skip verifying the clock */
> > +	if (state == PM_SUSPEND_STANDBY)
> > +		return 1;
> > +
> 
> In my opinion we should use the select() already in place in
> at91_pm_enter() to do that:
Accepted. Thanks

> 
> >  static int at91_pm_enter(suspend_state_t state)  {
> >  	at91_pinctrl_gpio_suspend();
> >
> >  	switch (state) {
>      (...)
> > +	case PM_SUSPEND_MEM:
> 
> 	/*
> 	 * Ensure that clocks are in a valid state.
> 	 */
> 	if (!at91_pm_verify_clocks())
> 		goto error;
> 	/* FALLTHROUGH */
> 
> > +	case PM_SUSPEND_STANDBY:
> >  		/*
> > -		 * Suspend-to-RAM is like STANDBY plus slow clock mode, so
> 
> 
> Sylvain

Best Regards,
Wenyou Yang
ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥