Re: [v6 0/4] mpt3sas: Hot-Plug Surprise removal support on IOC.

[Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>]

Any update on this ?
In V6, I have posted has only defect fixes (Other than HBA Hot-Plug
Surprise remove support).

We are reworking and incorporating the suggestions from Bjorn.
And after covering tests, we ll post Hot-Plug Surprise removal patches.

Thanks,
Suganath Prabu
On Tue, Oct 23, 2018 at 3:51 PM Suganath Prabu
<suganath-prabu.subramani@broadcom.com> wrote:
>
> v6 Change set:
> Incorporated changes as suggested by Andy.
> In Patch 1 converted while loop to do while in
> function mpt3sas_wait_for_ioc_to_operational().
> And in patch 3 removed parentheses.
>
> V5 Change set:
> V5 post has only defect fixes.
> We are reworking and incorporating the suggestions from Bjorn.
> And after covering tests, we ll be post Hot-Plug Surprise
>  removal patches.
>
> V4 Change set:
> Reframe split strings in print statement, to avoid
>
> V3 Change Set:
> Simplified function "mpt3sas_base_pci_device_is_available" and
> made inline
>
> V2 changes:
> Replaced mpt3sas_base_pci_device_is_unplugged with
> pci_device_is_present.
>
> V1 changes:
> In Patch 0001 - unlock mutex, if active reset is in progress.
> Suganath Prabu (4):
>   mpt3sas: Separate out mpt3sas_wait_for_ioc_to_operational
>   mpt3sas: Fix Sync cache command failure during driver unload
>   mpt3sas:Fix driver modifying persistent data.
>   mpt3sas: Bump driver version to 27.100.00.00.
>
>  drivers/scsi/mpt3sas/mpt3sas_base.c      | 75 ++++++++++++++++++--------------
>  drivers/scsi/mpt3sas/mpt3sas_base.h      |  8 +++-
>  drivers/scsi/mpt3sas/mpt3sas_config.c    | 28 +++---------
>  drivers/scsi/mpt3sas/mpt3sas_ctl.c       | 21 ++-------
>  drivers/scsi/mpt3sas/mpt3sas_scsih.c     | 38 +++++++++++++++-
>  drivers/scsi/mpt3sas/mpt3sas_transport.c | 70 ++++++-----------------------
>  6 files changed, 106 insertions(+), 134 deletions(-)
>
> --
> 1.8.3.1
>