LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Alexandru Ardelean <ardeleanalex@gmail.com>
To: Andrea Merello <andrea.merello@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Rob Herring <robh+dt@kernel.org>,
	matt.ranostay@konsulko.com,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	vlad.dogaru@intel.com, LKML <linux-kernel@vger.kernel.org>,
	linux-iio <linux-iio@vger.kernel.org>,
	Andrea Merello <andrea.merello@iit.it>
Subject: Re: [PATCH 2/4] iio: imu: add Bosch Sensortec BNO055 core driver
Date: Fri, 16 Jul 2021 10:24:02 +0300	[thread overview]
Message-ID: <CA+U=DsrpCb0XW-M4KyZvLpCdMmntgCN+kd8HnS2RotWK-GD-OA@mail.gmail.com> (raw)
In-Reply-To: <20210715141742.15072-3-andrea.merello@gmail.com>

On Thu, Jul 15, 2021 at 5:21 PM Andrea Merello <andrea.merello@gmail.com> wrote:
>
> This patch adds a core driver for the BNO055 IMU from Bosch. This IMU
> can be connected via both serial and I2C busses; separate patches will
> add support for them.
>

Hey,

I tried to comment on the ones that Andy did not touch.
I had a little trouble following all the locking.
I'm not sure if I missed anything.
My notes are inline.


> The driver supports "AMG" (Accelerometer, Magnetometer, Gyroscope) mode,
> that provides raw data from the said internal sensors, and a couple of
> "fusion" modes (i.e. the IMU also do calculations in order to provide
> euler angles, quaternions, linear acceleration and gravity measurements).
>
> In fusion modes the AMG data is still available (with some calibration
> refinements done by the IMU), but certain settings such as low pass
> filters cut-off frequency and sensors ranges are fixed, while in AMG mode
> they can be customized; this is why AMG mode can still be interesting.
>
> Signed-off-by: Andrea Merello <andrea.merello@iit.it>
> Cc: Andrea Merello <andrea.merello@gmail.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Matt Ranostay <matt.ranostay@konsulko.com>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Cc: Vlad Dogaru <vlad.dogaru@intel.com>
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-iio@vger.kernel.org
> ---
>  drivers/iio/imu/Kconfig         |    1 +
>  drivers/iio/imu/Makefile        |    1 +
>  drivers/iio/imu/bno055/Kconfig  |    7 +
>  drivers/iio/imu/bno055/Makefile |    6 +
>  drivers/iio/imu/bno055/bno055.c | 1361 +++++++++++++++++++++++++++++++
>  drivers/iio/imu/bno055/bno055.h |   12 +
>  6 files changed, 1388 insertions(+)
>  create mode 100644 drivers/iio/imu/bno055/Kconfig
>  create mode 100644 drivers/iio/imu/bno055/Makefile
>  create mode 100644 drivers/iio/imu/bno055/bno055.c
>  create mode 100644 drivers/iio/imu/bno055/bno055.h
>
> diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig
> index 001ca2c3ff95..f1d7d4b5e222 100644
> --- a/drivers/iio/imu/Kconfig
> +++ b/drivers/iio/imu/Kconfig
> @@ -52,6 +52,7 @@ config ADIS16480
>           ADIS16485, ADIS16488 inertial sensors.
>
>  source "drivers/iio/imu/bmi160/Kconfig"
> +source "drivers/iio/imu/bno055/Kconfig"
>
>  config FXOS8700
>         tristate
> diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile
> index c82748096c77..6eb612034722 100644
> --- a/drivers/iio/imu/Makefile
> +++ b/drivers/iio/imu/Makefile
> @@ -15,6 +15,7 @@ adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o
>  obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o
>
>  obj-y += bmi160/
> +obj-y += bno055/
>
>  obj-$(CONFIG_FXOS8700) += fxos8700_core.o
>  obj-$(CONFIG_FXOS8700_I2C) += fxos8700_i2c.o
> diff --git a/drivers/iio/imu/bno055/Kconfig b/drivers/iio/imu/bno055/Kconfig
> new file mode 100644
> index 000000000000..2bfed8df4554
> --- /dev/null
> +++ b/drivers/iio/imu/bno055/Kconfig
> @@ -0,0 +1,7 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# driver for Bosh bmo055
> +#
> +
> +config BOSH_BNO055_IIO
> +       tristate
> diff --git a/drivers/iio/imu/bno055/Makefile b/drivers/iio/imu/bno055/Makefile
> new file mode 100644
> index 000000000000..15c5ddf8d648
> --- /dev/null
> +++ b/drivers/iio/imu/bno055/Makefile
> @@ -0,0 +1,6 @@
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +# Makefile for bosh bno055
> +#
> +
> +obj-$(CONFIG_BOSH_BNO055_IIO) += bno055.o
> diff --git a/drivers/iio/imu/bno055/bno055.c b/drivers/iio/imu/bno055/bno055.c
> new file mode 100644
> index 000000000000..888a88bb13d5
> --- /dev/null
> +++ b/drivers/iio/imu/bno055/bno055.c
> @@ -0,0 +1,1361 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * IIO driver for Bosh BNO055 IMU
> + *
> + * Copyright (C) 2021 Istituto Italiano di Tecnologia
> + * Electronic Design Laboratory
> + * Written by Andrea Merello <andrea.merello@iit.it>
> + *
> + * Portions of this driver are taken from the BNO055 driver patch
> + * from Vlad Dogaru which is Copyright (c) 2016, Intel Corporation.
> + *
> + * This driver is also based on BMI160 driver, which is:
> + *     Copyright (c) 2016, Intel Corporation.
> + *     Copyright (c) 2019, Martin Kelly.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/firmware.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/triggered_buffer.h>
> +#include <linux/iio/trigger_consumer.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/irq.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/regmap.h>
> +#include <linux/util_macros.h>
> +
> +#include "bno055.h"
> +
> +#define BNO055_FW_NAME "bno055-caldata"
> +#define BNO055_FW_EXT ".dat"
> +
> +/* common registers */
> +#define BNO055_PAGESEL_REG             0x7
> +
> +/* page 0 registers */
> +#define BNO055_CHIP_ID_REG             0x0
> +#define BNO055_CHIP_ID_MAGIC 0xA0
> +#define BNO055_SW_REV_LSB_REG          0x4
> +#define BNO055_SW_REV_MSB_REG          0x5
> +#define BNO055_ACC_DATA_X_LSB_REG      0x8
> +#define BNO055_ACC_DATA_Y_LSB_REG      0xA
> +#define BNO055_ACC_DATA_Z_LSB_REG      0xC
> +#define BNO055_MAG_DATA_X_LSB_REG      0xE
> +#define BNO055_MAG_DATA_Y_LSB_REG      0x10
> +#define BNO055_MAG_DATA_Z_LSB_REG      0x12
> +#define BNO055_GYR_DATA_X_LSB_REG      0x14
> +#define BNO055_GYR_DATA_Y_LSB_REG      0x16
> +#define BNO055_GYR_DATA_Z_LSB_REG      0x18
> +#define BNO055_EUL_DATA_X_LSB_REG      0x1A
> +#define BNO055_EUL_DATA_Y_LSB_REG      0x1C
> +#define BNO055_EUL_DATA_Z_LSB_REG      0x1E
> +#define BNO055_QUAT_DATA_W_LSB_REG     0x20
> +#define BNO055_LIA_DATA_X_LSB_REG      0x28
> +#define BNO055_LIA_DATA_Y_LSB_REG      0x2A
> +#define BNO055_LIA_DATA_Z_LSB_REG      0x2C
> +#define BNO055_GRAVITY_DATA_X_LSB_REG  0x2E
> +#define BNO055_GRAVITY_DATA_Y_LSB_REG  0x30
> +#define BNO055_GRAVITY_DATA_Z_LSB_REG  0x32
> +#define BNO055_TEMP_REG                        0x34
> +#define BNO055_CALIB_STAT_REG          0x35
> +#define BNO055_CALIB_STAT_MASK 3
> +#define BNO055_CALIB_STAT_MAGN_SHIFT 0
> +#define BNO055_CALIB_STAT_ACCEL_SHIFT 2
> +#define BNO055_CALIB_STAT_GYRO_SHIFT 4
> +#define BNO055_CALIB_STAT_SYS_SHIFT 6
> +#define BNO055_SYS_TRIGGER_REG         0x3F
> +#define BNO055_SYS_TRIGGER_RST_INT BIT(6)
> +#define BNO055_SYS_TRIGGER_CLK_SEL BIT(7)
> +#define BNO055_OPR_MODE_REG            0x3D
> +#define BNO055_OPR_MODE_CONFIG 0x0
> +#define BNO055_OPR_MODE_AMG 0x7
> +#define BNO055_OPR_MODE_FUSION_FMC_OFF 0xB
> +#define BNO055_OPR_MODE_FUSION 0xC
> +#define BNO055_UNIT_SEL_REG            0x3B
> +#define BNO055_UNIT_SEL_ANDROID BIT(7)
> +#define BNO055_CALDATA_START           0x55
> +#define BNO055_CALDATA_END             0x6A
> +#define BNO055_CALDATA_LEN (BNO055_CALDATA_END - BNO055_CALDATA_START + 1)
> +
> +/*
> + * The difference in address between the register that contains the
> + * value and the register that contains the offset.  This applies for
> + * accel, gyro and magn channels.
> + */
> +#define BNO055_REG_OFFSET_ADDR         0x4D
> +
> +/* page 1 registers */
> +#define PG1(x) ((x) | 0x80)
> +#define BNO055_ACC_CONFIG_REG          PG1(0x8)
> +#define BNO055_ACC_CONFIG_LPF_MASK 0x1C
> +#define BNO055_ACC_CONFIG_LPF_SHIFT 0x2
> +#define BNO055_ACC_CONFIG_RANGE_MASK 0x3
> +#define BNO055_ACC_CONFIG_RANGE_SHIFT 0x0
> +#define BNO055_MAG_CONFIG_REG          PG1(0x9)
> +#define BNO055_MAG_CONFIG_HIGHACCURACY 0x18
> +#define BNO055_MAG_CONFIG_ODR_MASK 0x7
> +#define BNO055_MAG_CONFIG_ODR_SHIFT 0
> +#define BNO055_GYR_CONFIG_REG          PG1(0xA)
> +#define BNO055_GYR_CONFIG_RANGE_MASK 0x7
> +#define BNO055_GYR_CONFIG_RANGE_SHIFT 0
> +#define BNO055_GYR_CONFIG_LPF_MASK 0x38
> +#define BNO055_GYR_CONFIG_LPF_SHIFT 3
> +#define BNO055_INT_MSK                 PG1(0xF)
> +#define BNO055_INT_EN                  PG1(0x10)
> +#define BNO055_INT_ACC_BSX_DRDY BIT(0)
> +#define BNO055_INT_MAG_DRDY BIT(1)
> +#define BNO055_INT_GYR_DRDY BIT(4)
> +#define BNO055_UID_REG                 PG1(0x50)
> +#define BNO055_UID_LEN (0xF)
> +
> +static const int bno055_mag_odr_vals[] = {2, 6, 8, 10, 15, 20, 25, 30};
> +static const int bno055_acc_lpf_vals[] = {781, 1563, 3125, 6250,
> +                                           12500, 25000, 50000, 100000};
> +static const int bno055_acc_ranges[] = {2, 4, 8, 16};
> +static const int bno055_gyr_lpf_vals[] = {523, 230, 116, 47, 23, 12, 64, 32};
> +static const int bno055_gyr_ranges[] = {2000, 1000, 500, 250, 125};
> +
> +struct bno055_priv {
> +       struct regmap *regmap;
> +       struct device *dev;
> +       struct clk *clk;
> +       int operation_mode;
> +       int xfer_burst_break_thr;
> +       struct mutex lock;
> +       u8 uid[BNO055_UID_LEN];
> +};
> +
> +static int find_closest_unsorted(int val, const int arr[], int len)
> +{
> +       int i;
> +       int best_idx, best_delta, delta;
> +       int first = 1;
> +
> +       for (i = 0; i < len; i++) {
> +               delta = abs(arr[i] - val);
> +               if (first || delta < best_delta) {
> +                       best_delta = delta;
> +                       best_idx = i;
> +               }
> +               first = 0;
> +       }
> +
> +       return best_idx;
> +}
> +
> +static bool bno055_regmap_volatile(struct device *dev, unsigned int reg)
> +{
> +       if ((reg >= 0x8 && reg <= 0x3A) ||
> +           /* when in fusion mode, config is updated by chip */
> +           reg == BNO055_MAG_CONFIG_REG ||
> +           reg == BNO055_ACC_CONFIG_REG ||
> +           reg == BNO055_GYR_CONFIG_REG ||
> +           (reg >= BNO055_CALDATA_START && reg <= BNO055_CALDATA_END))
> +               return true;
> +       return false;
> +}
> +
> +static bool bno055_regmap_readable(struct device *dev, unsigned int reg)
> +{
> +       if ((reg <= 0x7F && reg >= 0x6B) ||
> +           reg == 0x3C ||
> +           (reg <= PG1(0x7F) && reg >= PG1(0x60)) ||
> +           (reg <= PG1(0x4F) && reg >= PG1(0x20)) ||
> +           reg == PG1(0xE) ||
> +           (reg <= PG1(0x6) && reg >= PG1(0x0)))
> +               return false;
> +       return true;
> +}
> +
> +static bool bno055_regmap_writeable(struct device *dev, unsigned int reg)
> +{
> +       if ((!bno055_regmap_readable(dev, reg)) ||
> +           (reg <= 0x3A && reg >= 0x8) ||
> +           reg <= 0x6 ||
> +           (reg <= PG1(0x5F) && reg >= PG1(0x50)))
> +               return false;
> +       return true;
> +}
> +
> +static const struct regmap_range_cfg bno055_regmap_ranges[] = {
> +       {
> +               .range_min = 0,
> +               .range_max = 0x7f * 2,
> +               .selector_reg = BNO055_PAGESEL_REG,
> +               .selector_mask = 0xff,
> +               .selector_shift = 0,
> +               .window_start = 0,
> +               .window_len = 0x80
> +       },
> +};
> +
> +const struct regmap_config bno055_regmap_config = {
> +       .name      = "bno055",
> +       .reg_bits  = 8,
> +       .val_bits  = 8,
> +       .ranges = bno055_regmap_ranges,
> +       .num_ranges = 1,
> +       .volatile_reg = bno055_regmap_volatile,
> +       .max_register = 0x80 * 2,
> +       .writeable_reg = bno055_regmap_writeable,
> +       .readable_reg = bno055_regmap_readable,
> +       .cache_type = REGCACHE_RBTREE,
> +};
> +EXPORT_SYMBOL_GPL(bno055_regmap_config);
> +
> +static int bno055_reg_read(struct bno055_priv *priv,
> +                          unsigned int reg, unsigned int *val)
> +{
> +       int res = regmap_read(priv->regmap, reg, val);
> +
> +       if (res && res != -ERESTARTSYS) {
> +               dev_err(priv->dev, "Regmap read error. adr: 0x%x, res: %d",
> +                       reg,  res);
> +       }
> +
> +       return res;
> +}
> +
> +static int bno055_reg_write(struct bno055_priv *priv,
> +                           unsigned int reg, unsigned int val)
> +{
> +       int res = regmap_write(priv->regmap, reg, val);
> +
> +       if (res && res != -ERESTARTSYS) {
> +               dev_err(priv->dev, "Regmap write error. adr: 0x%x, res: %d",
> +                       reg,  res);
> +       }
> +
> +       return res;
> +}
> +
> +static int bno055_reg_update_bits(struct bno055_priv *priv, unsigned int reg,
> +                                 unsigned int mask, unsigned int val)
> +{
> +       int res = regmap_update_bits(priv->regmap, reg, mask, val);
> +
> +       if (res && res != -ERESTARTSYS) {
> +               dev_err(priv->dev, "Regmap update_bits  error. adr: 0x%x, res: %d",
> +                       reg,  res);
> +       }
> +
> +       return res;
> +}
> +
> +/* must be called in configuration mode */
> +int bno055_calibration_load(struct bno055_priv *priv, const struct firmware *fw)
> +{
> +       int i;
> +       unsigned int tmp;
> +       u8 cal[BNO055_CALDATA_LEN];
> +       int read, tot_read = 0;
> +       int ret = 0;
> +       char *buf = kmalloc(fw->size + 1, GFP_KERNEL);
> +
> +       if (!buf)
> +               return -ENOMEM;
> +
> +       memcpy(buf, fw->data, fw->size);
> +       buf[fw->size] = '\0';
> +       for (i = 0; i < BNO055_CALDATA_LEN; i++) {
> +               ret = sscanf(buf + tot_read, "%x%n",
> +                            &tmp, &read);
> +               if (ret != 1 || tmp > 0xff) {
> +                       ret = -EINVAL;
> +                       goto exit;
> +               }
> +               cal[i] = tmp;
> +               tot_read += read;
> +       }
> +       dev_dbg(priv->dev, "loading cal data: %*ph", BNO055_CALDATA_LEN, cal);
> +       ret = regmap_bulk_write(priv->regmap, BNO055_CALDATA_START,
> +                               cal, BNO055_CALDATA_LEN);
> +exit:
> +       kfree(buf);
> +       return ret;
> +}
> +
> +static int bno055_init(struct bno055_priv *priv, const struct firmware *caldata)
> +{
> +       int res;
> +
> +       res = bno055_reg_write(priv, BNO055_SYS_TRIGGER_REG,
> +                              (priv->clk ? BNO055_SYS_TRIGGER_CLK_SEL : 0) |
> +                              BNO055_SYS_TRIGGER_RST_INT);
> +       if (res)
> +               return res;
> +
> +       msleep(100);
> +       res = bno055_reg_write(priv, BNO055_OPR_MODE_REG,
> +                              BNO055_OPR_MODE_CONFIG);
> +       if (res)
> +               return res;
> +
> +       /* use standard SI units */
> +       res = bno055_reg_write(priv, BNO055_UNIT_SEL_REG,
> +                              BNO055_UNIT_SEL_ANDROID);
> +       if (res)
> +               return res;
> +
> +       if (caldata) {
> +               res = bno055_calibration_load(priv, caldata);
> +               if (res)
> +                       dev_warn(priv->dev, "failed to load calibration data with error %d",
> +                                res);
> +       }
> +
> +       /*
> +        * Start in fusion mode (all data available), but with magnetometer auto
> +        * calibration switched off, in order not to overwrite magnetometer
> +        * calibration data in case one want to keep it untouched.
> +        */
> +       priv->operation_mode = BNO055_OPR_MODE_FUSION_FMC_OFF;
> +       return bno055_reg_write(priv, BNO055_OPR_MODE_REG,
> +                               priv->operation_mode);
> +}
> +
> +static void bno055_uninit(void *arg)
> +{
> +       struct bno055_priv *priv = arg;
> +
> +       bno055_reg_write(priv, BNO055_INT_EN, 0);
> +
> +       clk_disable_unprepare(priv->clk);

devm_add_action_or_reset() callbacks should be used as one-per-each uninit;
it's one of the rules for their usage; it also took me a while to get this;

so, you would do:

..................
static void bno055_clk_disable(void *clk)
{
       clk_disable_unprepare(clk)
}

static void bno055_uninit(void *priv)
{
      bno055_reg_write(priv, BNO055_INT_EN, 0);
}

.........................

ret = clk_prepare_enable(priv->clk);
if (ret)
   return ret;
// also make sure to check return code for clk_prepare_enable

ret = devm_add_action_or_reset(dev, bno055_clk_disable, priv->clk)
if (ret)
    return ret;

............

res = bno055_init(priv, caldata);
if (res)
  return res;

ret = devm_add_action_or_reset(dev, bno055_uninit, priv)
if (ret)
    return ret;

Right now, as  bno055_uninit()  does both, which is not recommended,
as devm_ uninit actions should mirror the init actions (but in
reverse).




> +}
> +
> +#define BNO055_CHANNEL(_type, _axis, _index, _address, _sep, _sh) {    \
> +       .address = _address,                                            \
> +       .type = _type,                                                  \
> +       .modified = 1,                                                  \
> +       .channel2 = IIO_MOD_##_axis,                                    \
> +       .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | (_sep),          \
> +       .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | (_sh),   \
> +       .scan_index = _index,                                           \
> +       .scan_type = {                                                  \
> +               .sign = 's',                                            \
> +               .realbits = 16,                                         \
> +               .storagebits = 16,                                      \
> +               .endianness = IIO_LE,                                   \
> +               .repeat = IIO_MOD_##_axis == IIO_MOD_QUATERNION ? 4 : 0 \
> +       },                                                              \
> +}
> +
> +/* scan indexes follow DATA register order */
> +enum bmi160_scan_axis {
> +       BNO055_SCAN_ACCEL_X,
> +       BNO055_SCAN_ACCEL_Y,
> +       BNO055_SCAN_ACCEL_Z,
> +       BNO055_SCAN_MAGN_X,
> +       BNO055_SCAN_MAGN_Y,
> +       BNO055_SCAN_MAGN_Z,
> +       BNO055_SCAN_GYRO_X,
> +       BNO055_SCAN_GYRO_Y,
> +       BNO055_SCAN_GYRO_Z,
> +       BNO055_SCAN_HEADING,
> +       BNO055_SCAN_ROLL,
> +       BNO055_SCAN_PITCH,
> +       BNO055_SCAN_QUATERNION,
> +       BNO055_SCAN_LIA_X,
> +       BNO055_SCAN_LIA_Y,
> +       BNO055_SCAN_LIA_Z,
> +       BNO055_SCAN_GRAVITY_X,
> +       BNO055_SCAN_GRAVITY_Y,
> +       BNO055_SCAN_GRAVITY_Z,
> +       BNO055_SCAN_TIMESTAMP,
> +};
> +
> +static const struct iio_chan_spec bno055_channels[] = {
> +       /* accelerometer */
> +       BNO055_CHANNEL(IIO_ACCEL, X, BNO055_SCAN_ACCEL_X,
> +                      BNO055_ACC_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
> +                      BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
> +       BNO055_CHANNEL(IIO_ACCEL, Y, BNO055_SCAN_ACCEL_Y,
> +                      BNO055_ACC_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
> +                      BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
> +       BNO055_CHANNEL(IIO_ACCEL, Z, BNO055_SCAN_ACCEL_Z,
> +                      BNO055_ACC_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
> +                      BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
> +       /* gyroscope */
> +       BNO055_CHANNEL(IIO_ANGL_VEL, X, BNO055_SCAN_GYRO_X,
> +                      BNO055_GYR_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
> +                      BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
> +       BNO055_CHANNEL(IIO_ANGL_VEL, Y, BNO055_SCAN_GYRO_Y,
> +                      BNO055_GYR_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
> +                      BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
> +       BNO055_CHANNEL(IIO_ANGL_VEL, Z, BNO055_SCAN_GYRO_Z,
> +                      BNO055_GYR_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
> +                      BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
> +       /* magnetometer */
> +       BNO055_CHANNEL(IIO_MAGN, X, BNO055_SCAN_MAGN_X,
> +                      BNO055_MAG_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
> +                      BIT(IIO_CHAN_INFO_SAMP_FREQ)),
> +       BNO055_CHANNEL(IIO_MAGN, Y, BNO055_SCAN_MAGN_Y,
> +                      BNO055_MAG_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
> +                      BIT(IIO_CHAN_INFO_SAMP_FREQ)),
> +       BNO055_CHANNEL(IIO_MAGN, Z, BNO055_SCAN_MAGN_Z,
> +                      BNO055_MAG_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
> +                      BIT(IIO_CHAN_INFO_SAMP_FREQ)),
> +       /* euler angle */
> +       BNO055_CHANNEL(IIO_ROT, X, BNO055_SCAN_HEADING,
> +                      BNO055_EUL_DATA_X_LSB_REG, 0, 0),
> +       BNO055_CHANNEL(IIO_ROT, Y, BNO055_SCAN_ROLL,
> +                      BNO055_EUL_DATA_Y_LSB_REG, 0, 0),
> +       BNO055_CHANNEL(IIO_ROT, Z, BNO055_SCAN_PITCH,
> +                      BNO055_EUL_DATA_Z_LSB_REG, 0, 0),
> +       /* quaternion */
> +       BNO055_CHANNEL(IIO_ROT, QUATERNION, BNO055_SCAN_QUATERNION,
> +                      BNO055_QUAT_DATA_W_LSB_REG, 0, 0),
> +
> +       /* linear acceleration */
> +       BNO055_CHANNEL(IIO_ACCEL, ACCEL_LINEAR_X, BNO055_SCAN_LIA_X,
> +                      BNO055_LIA_DATA_X_LSB_REG, 0, 0),
> +       BNO055_CHANNEL(IIO_ACCEL, ACCEL_LINEAR_Y, BNO055_SCAN_LIA_Y,
> +                      BNO055_LIA_DATA_Y_LSB_REG, 0, 0),
> +       BNO055_CHANNEL(IIO_ACCEL, ACCEL_LINEAR_Z, BNO055_SCAN_LIA_Z,
> +                      BNO055_LIA_DATA_Z_LSB_REG, 0, 0),
> +
> +       /* gravity vector */
> +       BNO055_CHANNEL(IIO_GRAVITY, X, BNO055_SCAN_GRAVITY_X,
> +                      BNO055_GRAVITY_DATA_X_LSB_REG, 0, 0),
> +       BNO055_CHANNEL(IIO_GRAVITY, Y, BNO055_SCAN_GRAVITY_Y,
> +                      BNO055_GRAVITY_DATA_Y_LSB_REG, 0, 0),
> +       BNO055_CHANNEL(IIO_GRAVITY, Z, BNO055_SCAN_GRAVITY_Z,
> +                      BNO055_GRAVITY_DATA_Z_LSB_REG, 0, 0),
> +
> +       {
> +               .type = IIO_TEMP,
> +               .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> +               .scan_index = -1
> +       },
> +       IIO_CHAN_SOFT_TIMESTAMP(BNO055_SCAN_TIMESTAMP),
> +};
> +
> +static int bno055_get_regmask(struct bno055_priv *priv, int *val, int *val2,
> +                             int reg, int mask, int shift,
> +                             const int tbl[], int k)
> +{
> +       int hwval, idx;
> +       int ret = bno055_reg_read(priv, reg, &hwval);
> +
> +       if (ret)
> +               return ret;
> +       if (val2)
> +               *val2 = 0;
> +       idx = (hwval & mask) >> shift;
> +       *val = tbl[idx] / k;
> +
> +       if (k == 1)
> +               return IIO_VAL_INT;
> +
> +       *val2 = (tbl[idx] % k) * 10000;
> +       return IIO_VAL_INT_PLUS_MICRO;
> +}
> +
> +static int bno055_set_regmask(struct bno055_priv *priv, int val, int val2,
> +                             int reg, int mask, int shift,
> +                             const int table[], int table_len, int k)
> +
> +{
> +       int ret;
> +       int hwval = find_closest_unsorted(val * k + val2 / 10000,
> +                                         table, table_len);
> +       /*
> +        * The closest value the HW supports is only one in fusion mode,
> +        * and it is autoselected, so don't do anything, just return OK,
> +        * as the closest possible value has been (virtually) selected
> +        */
> +       if (priv->operation_mode != BNO055_OPR_MODE_AMG)
> +               return 0;
> +
> +       dev_dbg(priv->dev, "WR config - reg, mask, val: 0x%x, 0x%x, 0x%x",
> +               reg, mask, hwval);
> +
> +       ret = bno055_reg_write(priv, BNO055_OPR_MODE_REG,
> +                              BNO055_OPR_MODE_CONFIG);
> +       if (ret)
> +               return ret;
> +
> +       ret = bno055_reg_update_bits(priv, reg, mask, hwval << shift);
> +
> +       if (ret)
> +               return ret;
> +
> +       return bno055_reg_write(priv, BNO055_OPR_MODE_REG,
> +                               BNO055_OPR_MODE_AMG);
> +       return 0;

this return 0 statement looks unreachable;
i wonder if the compiler would have caught this

> +}
> +
> +#define bno055_get_mag_odr(p, v, v2) \
> +       bno055_get_regmask(p, v, v2, \
> +                          BNO055_MAG_CONFIG_REG, BNO055_MAG_CONFIG_ODR_MASK, \
> +                          BNO055_MAG_CONFIG_ODR_SHIFT, bno055_mag_odr_vals, 1)
> +
> +#define bno055_set_mag_odr(p, v, v2) \
> +       bno055_set_regmask(p, v, v2, \
> +                          BNO055_MAG_CONFIG_REG, BNO055_MAG_CONFIG_ODR_MASK, \
> +                          BNO055_MAG_CONFIG_ODR_SHIFT, \
> +                          bno055_mag_odr_vals, \
> +                          ARRAY_SIZE(bno055_mag_odr_vals), 1)
> +
> +#define bno055_get_acc_lpf(p, v, v2) \
> +       bno055_get_regmask(p, v, v2, \
> +                          BNO055_ACC_CONFIG_REG, BNO055_ACC_CONFIG_LPF_MASK, \
> +                          BNO055_ACC_CONFIG_LPF_SHIFT, \
> +                          bno055_acc_lpf_vals, 100)
> +
> +#define bno055_set_acc_lpf(p, v, v2) \
> +       bno055_set_regmask(p, v, v2, \
> +                          BNO055_ACC_CONFIG_REG, BNO055_ACC_CONFIG_LPF_MASK, \
> +                          BNO055_ACC_CONFIG_LPF_SHIFT, \
> +                          bno055_acc_lpf_vals, \
> +                          ARRAY_SIZE(bno055_acc_lpf_vals), 100)
> +
> +#define bno055_get_acc_range(p, v, v2) \
> +       bno055_get_regmask(priv, v, v2, \
> +                          BNO055_ACC_CONFIG_REG, \
> +                          BNO055_ACC_CONFIG_RANGE_MASK, \
> +                          BNO055_ACC_CONFIG_RANGE_SHIFT, bno055_acc_ranges, 1)
> +
> +#define bno055_set_acc_range(p, v, v2) \
> +       bno055_set_regmask(p, v, v2, \
> +                          BNO055_ACC_CONFIG_REG, \
> +                          BNO055_ACC_CONFIG_RANGE_MASK,  \
> +                          BNO055_ACC_CONFIG_RANGE_SHIFT, \
> +                          bno055_acc_ranges, ARRAY_SIZE(bno055_acc_ranges), 1)
> +
> +#define bno055_get_gyr_lpf(p, v, v2) \
> +       bno055_get_regmask(p, v, v2, \
> +                          BNO055_GYR_CONFIG_REG, BNO055_GYR_CONFIG_LPF_MASK, \
> +                          BNO055_GYR_CONFIG_LPF_SHIFT, bno055_gyr_lpf_vals, 1)
> +
> +#define bno055_set_gyr_lpf(p, v, v2) \
> +       bno055_set_regmask(p, v, v2, \
> +                          BNO055_GYR_CONFIG_REG, BNO055_GYR_CONFIG_LPF_MASK, \
> +                          BNO055_GYR_CONFIG_LPF_SHIFT, \
> +                          bno055_gyr_lpf_vals, \
> +                          ARRAY_SIZE(bno055_gyr_lpf_vals), 1)
> +
> +#define bno055_get_gyr_range(p, v, v2) \
> +       bno055_get_regmask(p, v, v2, \
> +                          BNO055_GYR_CONFIG_REG, \
> +                          BNO055_GYR_CONFIG_RANGE_MASK,  \
> +                          BNO055_GYR_CONFIG_RANGE_SHIFT, \
> +                          bno055_gyr_ranges, 1)
> +
> +#define bno055_set_gyr_range(p, v, v2) \
> +       bno055_set_regmask(p, v, v2, \
> +                          BNO055_GYR_CONFIG_REG, \
> +                          BNO055_GYR_CONFIG_RANGE_MASK, \
> +                          BNO055_GYR_CONFIG_RANGE_SHIFT, \
> +                          bno055_gyr_ranges, ARRAY_SIZE(bno055_gyr_ranges), 1)
> +
> +static int bno055_read_simple_chan(struct iio_dev *indio_dev,
> +                                  struct iio_chan_spec const *chan,
> +                                  int *val, int *val2, long mask)
> +{
> +       struct bno055_priv *priv = iio_priv(indio_dev);
> +       __le16 raw_val;
> +       int ret;
> +
> +       switch (mask) {
> +       case IIO_CHAN_INFO_RAW:
> +               ret = regmap_bulk_read(priv->regmap, chan->address,
> +                                      &raw_val, 2);
> +               if (ret < 0)
> +                       return ret;
> +               *val = (s16)le16_to_cpu(raw_val);
> +               *val2 = 0;
> +               return IIO_VAL_INT;
> +       case IIO_CHAN_INFO_OFFSET:
> +               if (priv->operation_mode != BNO055_OPR_MODE_AMG) {
> +                       *val = 0;
> +               } else {
> +                       ret = regmap_bulk_read(priv->regmap,
> +                                              chan->address +
> +                                              BNO055_REG_OFFSET_ADDR,
> +                                              &raw_val, 2);
> +                       if (ret < 0)
> +                               return ret;
> +                       *val = -(s16)le16_to_cpu(raw_val);
> +               }
> +               *val2 = 0;
> +               return IIO_VAL_INT;
> +       case IIO_CHAN_INFO_SCALE:
> +               *val = 1;
> +               switch (chan->type) {
> +               case IIO_GRAVITY:
> +                       /* Table 3-35: 1 m/s^2 = 100 LSB */
> +               case IIO_ACCEL:
> +                       /* Table 3-17: 1 m/s^2 = 100 LSB */
> +                       *val2 = 100;
> +                       break;
> +               case IIO_MAGN:
> +                       /*
> +                        * Table 3-19: 1 uT = 16 LSB.  But we need
> +                        * Gauss: 1G = 0.1 uT.
> +                        */
> +                       *val2 = 160;
> +                       break;
> +               case IIO_ANGL_VEL:
> +                       /* Table 3-22: 1 Rps = 900 LSB */
> +                       *val2 = 900;
> +                       break;
> +               case IIO_ROT:
> +                       /* Table 3-28: 1 degree = 16 LSB */
> +                       *val2 = 16;
> +                       break;
> +               default:
> +                       return -EINVAL;
> +               }
> +               return IIO_VAL_FRACTIONAL;
> +       default:
> +               return -EINVAL;
> +
> +       case IIO_CHAN_INFO_SAMP_FREQ:
> +               if (chan->type == IIO_MAGN)
> +                       return bno055_get_mag_odr(priv, val, val2);
> +               else
> +                       return -EINVAL;
> +
> +       case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
> +               switch (chan->type) {
> +               case IIO_ANGL_VEL:
> +                       return bno055_get_gyr_lpf(priv, val, val2);
> +               case IIO_ACCEL:
> +                       return bno055_get_acc_lpf(priv, val, val2);
> +               default:
> +                       return -EINVAL;
> +               }
> +       }
> +}
> +
> +static int bno055_read_temp_chan(struct iio_dev *indio_dev, int *val)
> +{
> +       struct bno055_priv *priv = iio_priv(indio_dev);
> +       unsigned int raw_val;
> +       int ret;
> +
> +       ret = regmap_read(priv->regmap, BNO055_TEMP_REG, &raw_val);
> +       if (ret < 0)
> +               return ret;
> +
> +       /*
> +        * Tables 3-36 and 3-37: one byte of priv, signed, 1 LSB = 1C.
> +        * ABI wants milliC.
> +        */
> +       *val = raw_val * 1000;
> +
> +       return IIO_VAL_INT;
> +}
> +
> +static int bno055_read_quaternion(struct iio_dev *indio_dev,
> +                                 struct iio_chan_spec const *chan,
> +                                 int size, int *vals, int *val_len,
> +                                 long mask)
> +{
> +       struct bno055_priv *priv = iio_priv(indio_dev);
> +       __le16 raw_vals[4];
> +       int i, ret;
> +
> +       switch (mask) {
> +       case IIO_CHAN_INFO_RAW:
> +               if (size < 4)
> +                       return -EINVAL;
> +               ret = regmap_bulk_read(priv->regmap,
> +                                      BNO055_QUAT_DATA_W_LSB_REG,
> +                                      raw_vals, sizeof(raw_vals));
> +               if (ret < 0)
> +                       return ret;
> +               for (i = 0; i < 4; i++)
> +                       vals[i] = (s16)le16_to_cpu(raw_vals[i]);
> +               *val_len = 4;
> +               return IIO_VAL_INT_MULTIPLE;
> +       case IIO_CHAN_INFO_SCALE:
> +               /* Table 3-31: 1 quaternion = 2^14 LSB */
> +               if (size < 2)
> +                       return -EINVAL;
> +               vals[0] = 1;
> +               vals[1] = 1 << 14;
> +               return IIO_VAL_FRACTIONAL;
> +       default:
> +               return -EINVAL;
> +       }
> +}
> +
> +static int _bno055_read_raw_multi(struct iio_dev *indio_dev,
> +                                 struct iio_chan_spec const *chan,
> +                                 int size, int *vals, int *val_len,
> +                                 long mask)
> +{
> +       switch (chan->type) {
> +       case IIO_MAGN:
> +       case IIO_ACCEL:
> +       case IIO_ANGL_VEL:
> +       case IIO_GRAVITY:
> +               if (size < 2)
> +                       return -EINVAL;
> +               *val_len = 2;
> +               return bno055_read_simple_chan(indio_dev, chan,
> +                                              &vals[0], &vals[1],
> +                                              mask);
> +
> +       case IIO_TEMP:
> +               *val_len = 1;
> +               return bno055_read_temp_chan(indio_dev, &vals[0]);
> +
> +       case IIO_ROT:
> +               /*
> +                * Rotation is exposed as either a quaternion or three
> +                * Euler angles.
> +                */
> +               if (chan->channel2 == IIO_MOD_QUATERNION)
> +                       return bno055_read_quaternion(indio_dev, chan,
> +                                                     size, vals,
> +                                                     val_len, mask);
> +               if (size < 2)
> +                       return -EINVAL;
> +               *val_len = 2;
> +               return bno055_read_simple_chan(indio_dev, chan,
> +                                              &vals[0], &vals[1],
> +                                              mask);
> +       default:
> +               return -EINVAL;
> +       }
> +}
> +
> +static int bno055_read_raw_multi(struct iio_dev *indio_dev,
> +                                struct iio_chan_spec const *chan,
> +                                int size, int *vals, int *val_len,
> +                                long mask)
> +{
> +       int ret;
> +       struct bno055_priv *priv = iio_priv(indio_dev);
> +
> +       mutex_lock(&priv->lock);
> +       ret = _bno055_read_raw_multi(indio_dev, chan, size,
> +                                    vals, val_len, mask);
> +       mutex_unlock(&priv->lock);
> +       return ret;
> +}
> +
> +static int _bno055_write_raw(struct iio_dev *iio_dev,
> +                            struct iio_chan_spec const *chan,
> +                            int val, int val2, long mask)
> +{
> +       struct bno055_priv *priv = iio_priv(iio_dev);
> +
> +       switch (chan->type) {
> +       case IIO_MAGN:
> +               switch (mask) {
> +               case IIO_CHAN_INFO_SAMP_FREQ:
> +                       return bno055_set_mag_odr(priv, val, val2);
> +
> +               default:
> +                       return -EINVAL;
> +               }
> +               break;

This break looks unreachable.

> +       case IIO_ACCEL:
> +               switch (mask) {
> +               case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
> +                       return bno055_set_acc_lpf(priv, val, val2);
> +
> +               default:
> +                       return -EINVAL;
> +               }
> +       case IIO_ANGL_VEL:
> +               switch (mask) {
> +               case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
> +                       return bno055_set_gyr_lpf(priv, val, val2);
> +               }

this looks like an implicit switch-case fall-through;
sometimes the compiler complains about these

> +       default:
> +               return -EINVAL;
> +       }
> +
> +       return 0;

This return also looks unreachable.

> +}
> +
> +static int bno055_write_raw(struct iio_dev *iio_dev,
> +                           struct iio_chan_spec const *chan,
> +                           int val, int val2, long mask)
> +{
> +       int ret;
> +       struct bno055_priv *priv = iio_priv(iio_dev);
> +
> +       mutex_lock(&priv->lock);
> +       ret = _bno055_write_raw(iio_dev, chan, val, val2, mask);
> +       mutex_unlock(&priv->lock);
> +
> +       return ret;
> +}
> +
> +static ssize_t in_magn_sampling_frequency_available_show(struct device *dev,
> +                                                        struct device_attribute *attr,
> +                                                        char *buf)
> +{
> +       struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
> +
> +       return scnprintf(buf, PAGE_SIZE, "%s\n",
> +                        (priv->operation_mode != BNO055_OPR_MODE_AMG) ? "20" :
> +                        "2 6 8 10 15 20 25 30");
> +}
> +
> +static ssize_t in_accel_range_available_show(struct device *dev,
> +                                            struct device_attribute *attr,
> +                                            char *buf)
> +{
> +       struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
> +
> +       return scnprintf(buf, PAGE_SIZE, "%s\n",
> +                        (priv->operation_mode != BNO055_OPR_MODE_AMG) ? "4" :
> +                        "2 4 8 16");
> +}
> +
> +static ssize_t
> +in_accel_filter_low_pass_3db_frequency_available_show(struct device *dev,
> +                                                     struct device_attribute *attr,
> +                                                     char *buf)
> +{
> +       struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
> +
> +       return scnprintf(buf, PAGE_SIZE, "%s\n",
> +                        (priv->operation_mode != BNO055_OPR_MODE_AMG) ? "62.5" :
> +                        "7.81 15.63 31.25 62.5 125 250 500 1000");
> +}
> +
> +static ssize_t in_anglvel_range_available_show(struct device *dev,
> +                                              struct device_attribute *attr,
> +                                              char *buf)
> +{
> +       struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
> +
> +       return scnprintf(buf, PAGE_SIZE, "%s\n",
> +                        (priv->operation_mode != BNO055_OPR_MODE_AMG) ? "2000" :
> +                        "125 250 500 1000 2000");
> +}
> +
> +static ssize_t
> +in_anglvel_filter_low_pass_3db_frequency_available_show(struct device *dev,
> +                                                       struct device_attribute *attr,
> +                                                       char *buf)
> +{
> +       struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
> +
> +       return scnprintf(buf, PAGE_SIZE, "%s\n",
> +                        (priv->operation_mode != BNO055_OPR_MODE_AMG) ? "32" :
> +                         "12 23 47 32 64 116 230 523");
> +}
> +
> +static ssize_t bno055_operation_mode_show(struct device *dev,
> +                                         struct device_attribute *attr,
> +                                         char *buf)
> +{
> +       struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
> +
> +       return scnprintf(buf, PAGE_SIZE, "%s\n",
> +                        (priv->operation_mode == BNO055_OPR_MODE_AMG) ? "amg" :
> +                        (priv->operation_mode == BNO055_OPR_MODE_FUSION) ?
> +                        "fusion" : "fusion_fmc_off");
> +}
> +
> +static ssize_t bno055_operation_mode_store(struct device *dev,
> +                                          struct device_attribute *attr,
> +                                          const char *buf, size_t len)
> +{
> +       int res;
> +       struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
> +
> +       if (sysfs_streq(buf, "amg"))
> +               priv->operation_mode = BNO055_OPR_MODE_AMG;
> +       else if (sysfs_streq(buf, "fusion"))
> +               priv->operation_mode = BNO055_OPR_MODE_FUSION;
> +       else if (sysfs_streq(buf, "fusion_fmc_off"))
> +               priv->operation_mode = BNO055_OPR_MODE_FUSION_FMC_OFF;
> +       else
> +               return -EINVAL;
> +
> +       mutex_lock(&priv->lock);
> +       res = bno055_reg_write(priv, BNO055_OPR_MODE_REG,
> +                              BNO055_OPR_MODE_CONFIG);
> +       if (res) {
> +               mutex_unlock(&priv->lock);
> +               return res;
> +       }
> +
> +       res = bno055_reg_write(priv, BNO055_OPR_MODE_REG, priv->operation_mode);
> +       mutex_unlock(&priv->lock);
> +
> +       return res ? res : len;
> +}
> +
> +static ssize_t bno055_in_accel_range_show(struct device *dev,
> +                                         struct device_attribute *attr,
> +                                         char *buf)
> +{
> +       int val;
> +       struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
> +
> +       int res = bno055_get_acc_range(priv, &val, NULL);
> +
> +       if (res < 0)
> +               return res;
> +
> +       return scnprintf(buf, PAGE_SIZE, "%d\n", val);
> +}
> +
> +static ssize_t bno055_in_accel_range_store(struct device *dev,
> +                                          struct device_attribute *attr,
> +                                          const char *buf, size_t len)
> +{
> +       int ret;
> +       unsigned long val;
> +       struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
> +
> +       ret = kstrtoul(buf, 10, &val);
> +       if (ret)
> +               return ret;
> +
> +       mutex_lock(&priv->lock);
> +       ret = bno055_set_acc_range(priv, val, 0);
> +       mutex_unlock(&priv->lock);
> +
> +       return ret ? ret : len;
> +}
> +
> +static ssize_t bno055_in_gyr_range_show(struct device *dev,
> +                                       struct device_attribute *attr,
> +                                       char *buf)
> +{
> +       int val;
> +       struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
> +       int res = bno055_get_gyr_range(priv, &val, NULL);
> +
> +       if (res < 0)
> +               return res;
> +
> +       return scnprintf(buf, PAGE_SIZE, "%d\n", val);
> +}
> +
> +static ssize_t bno055_in_gyr_range_store(struct device *dev,
> +                                        struct device_attribute *attr,
> +                                        const char *buf, size_t len)
> +{
> +       int ret;
> +       unsigned long val;
> +       struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
> +
> +       ret = kstrtoul(buf, 10, &val);
> +       if (ret)
> +               return ret;
> +
> +       mutex_lock(&priv->lock);
> +       ret = bno055_set_gyr_range(priv, val, 0);
> +       mutex_unlock(&priv->lock);
> +
> +       return ret ? ret : len;
> +}
> +
> +static ssize_t bno055_get_calib_status(struct device *dev, char *buf, int which)
> +{
> +       int val;
> +       int ret;
> +       const char *calib_str;
> +       static const char * const calib_status[] = {"bad", "barely enough",
> +                                                  "fair", "good"};
> +       struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
> +
> +       if (priv->operation_mode == BNO055_OPR_MODE_AMG ||
> +           (priv->operation_mode == BNO055_OPR_MODE_FUSION_FMC_OFF &&
> +            which == BNO055_CALIB_STAT_MAGN_SHIFT)) {
> +               calib_str = "idle";
> +       } else {
> +               mutex_lock(&priv->lock);
> +               ret = bno055_reg_read(priv, BNO055_CALIB_STAT_REG, &val);
> +               mutex_unlock(&priv->lock);
> +
> +               if (ret)
> +                       return -EIO;
> +
> +               val = (val >> which) & BNO055_CALIB_STAT_MASK;
> +               calib_str = calib_status[val];
> +       }
> +
> +       return scnprintf(buf, PAGE_SIZE, "%s\n", calib_str);
> +}
> +
> +static ssize_t in_calibration_data_show(struct device *dev,
> +                                       struct device_attribute *attr,
> +                                       char *buf)
> +{
> +       int ret;
> +       int size;
> +       int i;
> +       u8 data[BNO055_CALDATA_LEN];
> +       struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
> +
> +       mutex_lock(&priv->lock);
> +       ret = bno055_reg_write(priv, BNO055_OPR_MODE_REG,
> +                              BNO055_OPR_MODE_CONFIG);
> +       if (ret)
> +               goto unlock;
> +
> +       ret = regmap_bulk_read(priv->regmap, BNO055_CALDATA_START, data,
> +                              BNO055_CALDATA_LEN);
> +       if (ret)
> +               goto unlock;
> +
> +       ret = bno055_reg_write(priv, BNO055_OPR_MODE_REG, priv->operation_mode);
> +       mutex_unlock(&priv->lock);
> +       if (ret)
> +               return ret;
> +
> +       for (size = 0, i = 0; i < BNO055_CALDATA_LEN; i++) {
> +               ret = scnprintf(buf + size,
> +                               PAGE_SIZE - size, "%02x%c", data[i],
> +                               (i + 1 < BNO055_CALDATA_LEN) ? ' ' : '\n');
> +               if (ret < 0)
> +                       return ret;
> +               size += ret;
> +       }
> +
> +       return size;
> +unlock:
> +       mutex_unlock(&priv->lock);
> +       return ret;
> +}
> +
> +static ssize_t in_autocalibration_status_sys_show(struct device *dev,
> +                                                 struct device_attribute *a,
> +                                                 char *buf)
> +{
> +       return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_SYS_SHIFT);
> +}
> +
> +static ssize_t in_autocalibration_status_accel_show(struct device *dev,
> +                                                   struct device_attribute *a,
> +                                                   char *buf)
> +{
> +       return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_ACCEL_SHIFT);
> +}
> +
> +static ssize_t in_autocalibration_status_gyro_show(struct device *dev,
> +                                                  struct device_attribute *a,
> +                                                  char *buf)
> +{
> +       return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_GYRO_SHIFT);
> +}
> +
> +static ssize_t in_autocalibration_status_magn_show(struct device *dev,
> +                                                  struct device_attribute *a,
> +                                                  char *buf)
> +{
> +       return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_MAGN_SHIFT);
> +}
> +
> +static IIO_DEVICE_ATTR_RO(in_magn_sampling_frequency_available,
> +                         0);
> +
> +static IIO_DEVICE_ATTR(operation_mode, 0644,
> +                      bno055_operation_mode_show,
> +                      bno055_operation_mode_store, 0);
> +
> +static IIO_CONST_ATTR(operation_mode_available,
> +                     "amg fusion fusion_fmc_off");
> +
> +static IIO_DEVICE_ATTR(in_accel_range, 0644,
> +                      bno055_in_accel_range_show,
> +                      bno055_in_accel_range_store, 0);
> +
> +static IIO_DEVICE_ATTR_RO(in_accel_range_available, 0);
> +static IIO_DEVICE_ATTR_RO(in_accel_filter_low_pass_3db_frequency_available, 0);
> +
> +static IIO_DEVICE_ATTR(in_anglvel_range, 0644,
> +                      bno055_in_gyr_range_show,
> +                      bno055_in_gyr_range_store, 0);
> +
> +static IIO_DEVICE_ATTR_RO(in_anglvel_range_available, 0);
> +static IIO_DEVICE_ATTR_RO(in_anglvel_filter_low_pass_3db_frequency_available, 0);
> +
> +static IIO_DEVICE_ATTR_RO(in_autocalibration_status_sys, 0);
> +static IIO_DEVICE_ATTR_RO(in_autocalibration_status_accel, 0);
> +static IIO_DEVICE_ATTR_RO(in_autocalibration_status_gyro, 0);
> +static IIO_DEVICE_ATTR_RO(in_autocalibration_status_magn, 0);
> +static IIO_DEVICE_ATTR_RO(in_calibration_data, 0);
> +
> +static struct attribute *bno055_attrs[] = {
> +       &iio_dev_attr_in_magn_sampling_frequency_available.dev_attr.attr,
> +       &iio_dev_attr_in_accel_range_available.dev_attr.attr,
> +       &iio_dev_attr_in_accel_range.dev_attr.attr,
> +       &iio_dev_attr_in_accel_filter_low_pass_3db_frequency_available.dev_attr.attr,
> +       &iio_dev_attr_in_anglvel_range_available.dev_attr.attr,
> +       &iio_dev_attr_in_anglvel_range.dev_attr.attr,
> +       &iio_dev_attr_in_anglvel_filter_low_pass_3db_frequency_available.dev_attr.attr,
> +       &iio_const_attr_operation_mode_available.dev_attr.attr,
> +       &iio_dev_attr_operation_mode.dev_attr.attr,
> +       &iio_dev_attr_in_autocalibration_status_sys.dev_attr.attr,
> +       &iio_dev_attr_in_autocalibration_status_accel.dev_attr.attr,
> +       &iio_dev_attr_in_autocalibration_status_gyro.dev_attr.attr,
> +       &iio_dev_attr_in_autocalibration_status_magn.dev_attr.attr,
> +       &iio_dev_attr_in_calibration_data.dev_attr.attr,
> +       NULL,
> +};
> +
> +static const struct attribute_group bno055_attrs_group = {
> +       .attrs = bno055_attrs,
> +};
> +
> +static const struct iio_info bno055_info = {
> +       .read_raw_multi = bno055_read_raw_multi,
> +       .write_raw = bno055_write_raw,
> +       .attrs = &bno055_attrs_group,
> +};
> +
> +/*
> + * Reads len samples from the HW, stores them in buf starting from buf_idx,
> + * and applies mask to cull (skip) unneeded samples.
> + * Updates buf_idx incrementing with the number of stored samples.
> + * Samples from HW are xferred into buf, then in-place copy on buf is
> + * performed in order to cull samples that need to be skipped.
> + * This avoids copies of the first samples until we hit the 1st sample to skip,
> + * and also avoids having an extra bounce buffer.
> + * buf must be able to contain len elements inspite of how many samples we are
> + * going to cull.
> + */
> +static int bno055_scan_xfer(struct bno055_priv *priv,
> +                           int start_ch, int len, unsigned long mask,
> +                           __le16 *buf, int *buf_idx)
> +{
> +       int buf_base = *buf_idx;
> +       const int base = BNO055_ACC_DATA_X_LSB_REG;
> +       int ret;
> +       int i, j, n;
> +       __le16 *dst, *src;
> +       bool quat_in_read = false;
> +       int offs_fixup = 0;
> +       int xfer_len = len;
> +
> +       /* All chans are made up 1 16bit sample, except for quaternion
> +        * that is made up 4 16-bit values.
> +        * For us the quaternion CH is just like 4 regular CHs.
> +        * If out read starts past the quaternion make sure to adjust the
> +        * starting offset; if the quaternion is contained in our scan then
> +        * make sure to adjust the read len.
> +        */
> +       if (start_ch > BNO055_SCAN_QUATERNION) {
> +               start_ch += 3;
> +       } else if ((start_ch <= BNO055_SCAN_QUATERNION) &&
> +                ((start_ch + len) > BNO055_SCAN_QUATERNION)) {
> +               quat_in_read = true;
> +               xfer_len += 3;
> +       }
> +
> +       ret = regmap_bulk_read(priv->regmap,
> +                              base + start_ch * sizeof(__le16),
> +                              buf + buf_base,
> +                              xfer_len * sizeof(__le16));
> +       if (ret)
> +               return ret;
> +
> +       for_each_set_bit(i, &mask, len) {
> +               if (quat_in_read && ((start_ch + i) > BNO055_SCAN_QUATERNION))
> +                       offs_fixup = 3;
> +
> +               dst = buf + *buf_idx;
> +               src = buf + buf_base + offs_fixup + i;
> +
> +               n = ((start_ch + i) == BNO055_SCAN_QUATERNION) ? 4 : 1;
> +
> +               if (dst != src) {
> +                       for (j = 0; j < n; j++)
> +                               dst[j] = src[j];
> +               }
> +
> +               *buf_idx += n;
> +       }
> +       return 0;
> +}
> +
> +static irqreturn_t bno055_trigger_handler(int irq, void *p)
> +{
> +       struct iio_poll_func *pf = p;
> +       struct iio_dev *iio_dev = pf->indio_dev;
> +       struct bno055_priv *priv = iio_priv(iio_dev);
> +       struct {
> +               __le16 chans[(BNO055_GRAVITY_DATA_Z_LSB_REG -
> +                             BNO055_ACC_DATA_X_LSB_REG) / 2];
> +               s64 timestamp __aligned(8);
> +       } buf;
> +       bool thr_hit;
> +       int quat;
> +       int ret;
> +       int start, end, xfer_start, next = 0;
> +       int buf_idx = 0;
> +       bool finish = false;
> +       unsigned long mask;
> +
> +       /* we have less than 32 chs, all masks fit in an ulong */
> +       start = find_first_bit(iio_dev->active_scan_mask, iio_dev->masklength);
> +       xfer_start = start;
> +       if (start == iio_dev->masklength)
> +               goto done;
> +
> +       mutex_lock(&priv->lock);
> +       while (!finish) {
> +               end = find_next_zero_bit(iio_dev->active_scan_mask,
> +                                        iio_dev->masklength, start);
> +               if (end == iio_dev->masklength) {
> +                       finish = true;
> +               } else {
> +                       next = find_next_bit(iio_dev->active_scan_mask,
> +                                            iio_dev->masklength, end);
> +                       if (next == iio_dev->masklength) {
> +                               finish = true;
> +                       } else {
> +                               quat = ((next > BNO055_SCAN_QUATERNION) &&
> +                                       (end <= BNO055_SCAN_QUATERNION)) ? 3 : 0;
> +                               thr_hit = (next - end + quat) >
> +                                       priv->xfer_burst_break_thr;
> +                       }
> +               }
> +
> +               if (thr_hit || finish) {
> +                       mask = *iio_dev->active_scan_mask >> xfer_start;
> +                       ret = bno055_scan_xfer(priv, xfer_start,
> +                                              end - xfer_start,
> +                                              mask, buf.chans, &buf_idx);
> +                       if (ret)
> +                               goto done;
> +                       xfer_start = next;
> +               }
> +               start = next;
> +       }
> +       iio_push_to_buffers_with_timestamp(iio_dev, &buf, pf->timestamp);
> +done:
> +       mutex_unlock(&priv->lock);
> +       iio_trigger_notify_done(iio_dev->trig);
> +       return IRQ_HANDLED;
> +}
> +
> +int bno055_probe(struct device *dev, struct regmap *regmap, int irq,
> +                int xfer_burst_break_thr)
> +{
> +       int ver, rev;
> +       int res;
> +       unsigned int val;
> +       struct gpio_desc *rst;
> +       struct iio_dev *iio_dev;
> +       struct bno055_priv *priv;
> +       /* base name + separator + UID + ext + zero */
> +       char fw_name_buf[sizeof(BNO055_FW_NAME BNO055_FW_EXT) +
> +                        BNO055_UID_LEN * 2 + 1 + 1];
> +       const struct firmware *caldata;
> +
> +       iio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
> +       if (!iio_dev)
> +               return -ENOMEM;
> +
> +       iio_dev->name = "bno055";
> +       priv = iio_priv(iio_dev);
> +       memset(priv, 0, sizeof(*priv));
> +       mutex_init(&priv->lock);
> +       priv->regmap = regmap;
> +       priv->dev = dev;
> +       priv->xfer_burst_break_thr = xfer_burst_break_thr;
> +       rst = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> +       if (IS_ERR(rst) && (PTR_ERR(rst) != -EPROBE_DEFER)) {
> +               dev_err(dev, "Failed to get reset GPIO");
> +               return PTR_ERR(rst);
> +       }
> +
> +       priv->clk = devm_clk_get_optional(dev, "clk");
> +       if (IS_ERR(priv->clk) && (PTR_ERR(priv->clk) != -EPROBE_DEFER)) {
> +               dev_err(dev, "Failed to get CLK");
> +               return PTR_ERR(priv->clk);
> +       }
> +
> +       clk_prepare_enable(priv->clk);
> +
> +       if (rst) {
> +               usleep_range(5000, 10000);
> +               gpiod_set_value_cansleep(rst, 0);
> +               usleep_range(650000, 750000);
> +       }
> +
> +       res = devm_add_action_or_reset(dev, bno055_uninit, priv);
> +       if (res)
> +               return res;
> +
> +       res = bno055_reg_read(priv, BNO055_CHIP_ID_REG, &val);
> +       if (res)
> +               return res;
> +
> +       if (val != BNO055_CHIP_ID_MAGIC) {
> +               dev_err(dev, "Unrecognized chip ID 0x%x", val);
> +               return -ENODEV;
> +       }
> +       dev_dbg(dev, "Found BMO055 chip");
> +
> +       res = regmap_bulk_read(priv->regmap, BNO055_UID_REG,
> +                              priv->uid, BNO055_UID_LEN);
> +       if (res)
> +               return res;
> +
> +       dev_info(dev, "unique ID: %*ph", BNO055_UID_LEN, priv->uid);
> +
> +       /*
> +        * This has nothing to do with the IMU firmware, this is for sensor
> +        * calibration data.
> +        */
> +       sprintf(fw_name_buf, BNO055_FW_NAME "-%*phN" BNO055_FW_EXT,
> +               BNO055_UID_LEN, priv->uid);
> +       res = request_firmware(&caldata, fw_name_buf, dev);
> +       if (res)
> +               res = request_firmware(&caldata,
> +                                      BNO055_FW_NAME BNO055_FW_EXT, dev);
> +
> +       if (res) {
> +               dev_notice(dev, "Failed to load calibration data firmware file; this has nothing to do with IMU main firmware.");
> +               dev_notice(dev, "You can calibrate your IMU (look for 'in_autocalibration_status*' files in sysfs) and then copy 'in_calibration_data' to your firmware file");
> +               caldata = NULL;
> +       }
> +
> +       res = bno055_init(priv, caldata);
> +       if (res)
> +               return res;
> +
> +       if (caldata)
> +               release_firmware(caldata);
> +
> +       res = regmap_read(priv->regmap,
> +                         BNO055_SW_REV_LSB_REG, &rev);
> +       if (res)
> +               return res;
> +
> +       res = regmap_read(priv->regmap,
> +                         BNO055_SW_REV_MSB_REG, &ver);
> +       if (res)
> +               return res;
> +
> +       dev_info(dev, "Firmware version %x.%x", ver, rev);
> +
> +       iio_dev->channels = bno055_channels;
> +       iio_dev->num_channels = ARRAY_SIZE(bno055_channels);
> +       iio_dev->info = &bno055_info;
> +       iio_dev->modes = INDIO_DIRECT_MODE;
> +
> +       res = devm_iio_triggered_buffer_setup(dev, iio_dev,
> +                                             iio_pollfunc_store_time,
> +                                             bno055_trigger_handler, NULL);
> +       if (res)
> +               return res;
> +
> +       return devm_iio_device_register(dev, iio_dev);
> +}
> +EXPORT_SYMBOL_GPL(bno055_probe);
> +
> +MODULE_AUTHOR("Andrea Merello <andrea.merello@iit.it>");
> +MODULE_DESCRIPTION("Bosch BNO055 driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/imu/bno055/bno055.h b/drivers/iio/imu/bno055/bno055.h
> new file mode 100644
> index 000000000000..163ab8068e7c
> --- /dev/null
> +++ b/drivers/iio/imu/bno055/bno055.h
> @@ -0,0 +1,12 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +#ifndef __BNO055_H__
> +#define __BNO055_H__
> +
> +#include <linux/device.h>
> +#include <linux/regmap.h>
> +
> +int bno055_probe(struct device *dev, struct regmap *regmap, int irq,
> +                int xfer_burst_break_thr);
> +extern const struct regmap_config bno055_regmap_config;
> +
> +#endif
> --
> 2.17.1
>

  parent reply	other threads:[~2021-07-16  7:24 UTC|newest]

Thread overview: 88+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-15 14:17 [PATCH 0/4] Add support for Bosch BNO055 IMU Andrea Merello
2021-07-15 14:17 ` [PATCH 1/4] iio: add modifiers for linear acceleration Andrea Merello
2021-07-17 14:32   ` Jonathan Cameron
2021-07-15 14:17 ` [PATCH 2/4] iio: imu: add Bosch Sensortec BNO055 core driver Andrea Merello
2021-07-15 16:49   ` Andy Shevchenko
2021-07-16  9:19     ` Andrea Merello
2021-07-16 12:39       ` Andy Shevchenko
2021-07-19  7:12         ` Andrea Merello
2021-07-19 10:33         ` Andrea Merello
2021-07-19  9:02     ` Andrea Merello
2021-07-19 11:48       ` Andy Shevchenko
2021-07-19 13:13         ` Andrea Merello
2021-07-16  7:24   ` Alexandru Ardelean [this message]
2021-07-16  9:49     ` Andrea Merello
2021-07-17 15:32   ` Jonathan Cameron
2021-07-19  8:30     ` Andrea Merello
2021-07-24 17:08       ` Jonathan Cameron
2021-07-26 14:36         ` Andrea Merello
2021-07-31 18:01           ` Jonathan Cameron
2021-08-04 10:06             ` Andrea Merello
2021-08-04 16:50               ` Jonathan Cameron
2021-08-04 19:27                 ` Andy Shevchenko
2021-07-15 14:17 ` [PATCH 3/4] dt-bindings: iio: imu: add bosch BNO055 serdev driver bindings Andrea Merello
2021-07-17 15:39   ` Jonathan Cameron
2021-07-19  8:44     ` Andrea Merello
2021-07-15 14:17 ` [PATCH 4/4] iio: imu: add BNO055 serdev driver Andrea Merello
2021-07-15 17:08   ` kernel test robot
2021-07-15 18:14   ` kernel test robot
2021-07-17 15:50   ` Jonathan Cameron
2021-07-19  8:49     ` Andrea Merello
2021-07-19 11:55       ` Andy Shevchenko
2021-07-19 12:59         ` Andrea Merello
2021-07-19 14:15           ` Andy Shevchenko
2021-07-19 15:07             ` Andrea Merello
2021-10-28 10:18 ` [v2 00/10] Add support for Bosch BNO055 IMU Andrea Merello
2021-10-28 10:18   ` [v2 01/10] utils_macro: introduce find_closest_unsorted() Andrea Merello
2021-10-28 10:25     ` Andy Shevchenko
2021-11-08 11:05       ` Andrea Merello
2021-10-28 10:18   ` [v2 02/10] iio: document linear acceleration modifiers Andrea Merello
2021-10-28 10:31     ` Andy Shevchenko
2021-11-09  7:48       ` Andrea Merello
2021-10-28 10:40     ` Jonathan Cameron
2021-11-09  8:00       ` Andrea Merello
2021-11-09 17:00         ` Jonathan Cameron
2021-10-28 10:18   ` [v2 03/10] iio: document euler angles modifiers Andrea Merello
2021-10-28 10:33     ` Andy Shevchenko
2021-10-28 10:41     ` Jonathan Cameron
2021-11-09  8:15       ` Andrea Merello
2021-11-09 17:03         ` Jonathan Cameron
2021-10-28 10:18   ` [v2 04/10] iio: add modifiers for linear acceleration Andrea Merello
2021-10-28 10:45     ` Jonathan Cameron
2021-11-09  9:58       ` Andrea Merello
2021-11-09 17:05         ` Jonathan Cameron
2021-10-28 10:18   ` [v2 05/10] iio: add modifers for pitch, yaw, roll Andrea Merello
2021-10-28 10:47     ` Jonathan Cameron
2021-10-28 10:18   ` [v2 06/10] iio: document bno055 private sysfs attributes Andrea Merello
2021-10-28 11:04     ` Jonathan Cameron
2021-11-09 10:22       ` Andrea Merello
2021-11-14 16:20         ` Jonathan Cameron
2022-01-04 11:42           ` Andrea Merello
2022-01-15 15:27             ` Jonathan Cameron
2022-01-17  9:37               ` Andrea Merello
2021-10-28 10:18   ` [v2 07/10] iio: imu: add Bosch Sensortec BNO055 core driver Andrea Merello
2021-10-28 13:31     ` Jonathan Cameron
2021-11-09 11:52       ` Andrea Merello
2021-11-14 16:33         ` Jonathan Cameron
2021-10-28 10:18   ` [v2 08/10] dt-bindings: iio: imu: add documentation for Bosch BNO055 bindings Andrea Merello
2021-10-28 12:25     ` Rob Herring
2021-10-28 10:18   ` [v2 09/10] iio: imu: add BNO055 serdev driver Andrea Merello
2021-10-28 12:31     ` Jonathan Cameron
2021-11-09 15:33       ` Andrea Merello
2021-11-14 16:37         ` Jonathan Cameron
2021-10-29  7:09     ` kernel test robot
2021-10-29 12:59     ` kernel test robot
2021-10-28 10:18   ` [v2 10/10] iio: imu: add BNO055 I2C driver Andrea Merello
2021-10-28 11:10     ` Jonathan Cameron
2021-11-11 10:12       ` Andrea Merello
2021-11-14 16:38         ` Jonathan Cameron
2021-10-28 22:04     ` Randy Dunlap
2021-11-09 11:56       ` Andrea Merello
2021-11-09 15:47         ` Randy Dunlap
2021-11-09 18:21           ` Joe Perches
2021-11-09 19:11             ` Randy Dunlap
2021-11-09 20:46               ` Joe Perches
2021-11-09 21:20                 ` Randy Dunlap
2021-10-29 13:30     ` kernel test robot
2021-10-28 10:35   ` [v2 00/10] Add support for Bosch BNO055 IMU Jonathan Cameron
2021-10-28 10:33     ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CA+U=DsrpCb0XW-M4KyZvLpCdMmntgCN+kd8HnS2RotWK-GD-OA@mail.gmail.com' \
    --to=ardeleanalex@gmail.com \
    --cc=andrea.merello@gmail.com \
    --cc=andrea.merello@iit.it \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=matt.ranostay@konsulko.com \
    --cc=robh+dt@kernel.org \
    --cc=vlad.dogaru@intel.com \
    --subject='Re: [PATCH 2/4] iio: imu: add Bosch Sensortec BNO055 core driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).