LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Alexandre Ghiti <alexandre.ghiti@canonical.com>
To: Anup Patel <anup@brainfault.org>
Cc: Support Opensource <support.opensource@diasemi.com>,
	Lee Jones <lee.jones@linaro.org>,
	linux-riscv <linux-riscv@lists.infradead.org>,
	"linux-kernel@vger.kernel.org List"
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] drivers: mfd: da9063: Add restart notifier implementation
Date: Tue, 21 Sep 2021 13:20:00 +0200	[thread overview]
Message-ID: <CA+zEjCsFG31kcM89B6LfP32Kh7WTHxzU6zvxigmKrDheKkU2fQ@mail.gmail.com> (raw)
In-Reply-To: <CAAhSdy07KzQnTH+ad4esxtfhogzpXQagY8KeDkq1Kc81-Z33Yw@mail.gmail.com>

I chose a priority lower than the one you proposed in your SRST series
(https://lkml.org/lkml/2021/6/9/620).

Alex

On Tue, Sep 21, 2021 at 12:17 PM Anup Patel <anup@brainfault.org> wrote:
>
> On Tue, Sep 21, 2021 at 11:04 AM Alexandre Ghiti
> <alexandre.ghiti@canonical.com> wrote:
> >
> > The SiFive Unmatched board uses the da9063 PMIC for reset: add a restart
> > notifier that will execute a small i2c sequence allowing to reset the
> > board.
> >
> > The original implementation comes from Marcus Comstedt and Anders Montonen
> > (https://forums.sifive.com/t/reboot-command/4721/28).
> >
> > Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
> > ---
> >  drivers/mfd/da9063-core.c       | 25 +++++++++++++++++++++++++
> >  include/linux/mfd/da9063/core.h |  3 +++
> >  2 files changed, 28 insertions(+)
> >
> > diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c
> > index df407c3afce3..c87b8d611f20 100644
> > --- a/drivers/mfd/da9063-core.c
> > +++ b/drivers/mfd/da9063-core.c
> > @@ -20,6 +20,7 @@
> >  #include <linux/mutex.h>
> >  #include <linux/mfd/core.h>
> >  #include <linux/regmap.h>
> > +#include <linux/reboot.h>
> >
> >  #include <linux/mfd/da9063/core.h>
> >  #include <linux/mfd/da9063/registers.h>
> > @@ -158,6 +159,18 @@ static int da9063_clear_fault_log(struct da9063 *da9063)
> >         return ret;
> >  }
> >
> > +static int da9063_restart_notify(struct notifier_block *this,
> > +                                unsigned long mode, void *cmd)
> > +{
> > +       struct da9063 *da9063 = container_of(this, struct da9063, restart_handler);
> > +
> > +       regmap_write(da9063->regmap, DA9063_REG_PAGE_CON, 0x00);
> > +       regmap_write(da9063->regmap, DA9063_REG_CONTROL_F, 0x04);
> > +       regmap_write(da9063->regmap, DA9063_REG_CONTROL_A, 0x68);
> > +
> > +       return NOTIFY_DONE;
> > +}
> > +
> >  int da9063_device_init(struct da9063 *da9063, unsigned int irq)
> >  {
> >         int ret;
> > @@ -197,6 +210,18 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq)
> >                 }
> >         }
> >
> > +       da9063->restart_handler.notifier_call = da9063_restart_notify;
> > +       da9063->restart_handler.priority = 128;
>
> How was this priority value chosen ?
>
> I mean, we will be having SBI SRST as well so we should choose
> a priority value lower than what we choose for SBI SRST handler.
>
> Regards,
> Anup
>
> > +       ret = register_restart_handler(&da9063->restart_handler);
> > +       if (ret) {
> > +               dev_err(da9063->dev, "Failed to register restart handler\n");
> > +               return ret;
> > +       }
> > +
> > +       devm_add_action(da9063->dev,
> > +                       (void (*)(void *))unregister_restart_handler,
> > +                       &da9063->restart_handler);
> > +
> >         return ret;
> >  }
> >
> > diff --git a/include/linux/mfd/da9063/core.h b/include/linux/mfd/da9063/core.h
> > index fa7a43f02f27..1b20c498e340 100644
> > --- a/include/linux/mfd/da9063/core.h
> > +++ b/include/linux/mfd/da9063/core.h
> > @@ -85,6 +85,9 @@ struct da9063 {
> >         int             chip_irq;
> >         unsigned int    irq_base;
> >         struct regmap_irq_chip_data *regmap_irq;
> > +
> > +       /* Restart */
> > +       struct notifier_block restart_handler;
> >  };
> >
> >  int da9063_device_init(struct da9063 *da9063, unsigned int irq);
> > --
> > 2.30.2
> >

  reply	other threads:[~2021-09-21 11:20 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-21  5:33 Alexandre Ghiti
2021-09-21 10:16 ` Anup Patel
2021-09-21 11:20   ` Alexandre Ghiti [this message]
2021-09-21 10:25 ` Ben Dooks
2021-09-21 11:33   ` Alexandre Ghiti
2021-09-23 13:16     ` Alexandre Ghiti
2021-09-24 15:04 ` Adam Thomson
2021-09-24 16:17   ` Alexandre Ghiti
2021-09-29 13:33     ` Adam Thomson
2021-09-30  7:51       ` David Abdurachmanov
2021-09-30  9:28         ` Adam Thomson
2021-09-30 10:25         ` Alexandre Ghiti
2021-10-04 12:05           ` Alexandre Ghiti
2021-10-04 15:11             ` Adam Thomson
2021-10-05 13:43               ` Alexandre Ghiti
2021-10-06  9:30                 ` Adam Thomson
2021-10-06 11:35                   ` Alexandre Ghiti
2021-10-08  9:46                     ` Adam Thomson
2021-10-12 10:32                       ` Adam Thomson
2021-10-14 15:51                         ` Alexandre Ghiti
2021-10-15  8:47                           ` Adam Thomson
2021-09-30  9:37       ` Alexandre Ghiti
2021-09-30 10:47         ` Adam Thomson
2021-09-30  9:55       ` Alexandre Ghiti
2021-10-04 15:29         ` Adam Thomson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CA+zEjCsFG31kcM89B6LfP32Kh7WTHxzU6zvxigmKrDheKkU2fQ@mail.gmail.com \
    --to=alexandre.ghiti@canonical.com \
    --cc=anup@brainfault.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=support.opensource@diasemi.com \
    --subject='Re: [PATCH] drivers: mfd: da9063: Add restart notifier implementation' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).