LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Phillip Potter <phil@philpotter.co.uk>
To: Martin Kaiser <martin@kaiser.cx>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Larry Finger <Larry.Finger@lwfinger.net>,
	Dan Carpenter <dan.carpenter@oracle.com>,
	Michael Straube <straube.linux@gmail.com>,
	linux-staging@lists.linux.dev,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 03/10] staging: rtl8188eu: use actual request type as parameter
Date: Sat, 21 Aug 2021 18:44:28 +0100	[thread overview]
Message-ID: <CAA=Fs0=k5GDmML7xy8PFwTKEWTDnO7KbWwv5vyO-sNUz0aO33A@mail.gmail.com> (raw)
In-Reply-To: <20210821164859.4351-3-martin@kaiser.cx>

On Sat, 21 Aug 2021 at 17:49, Martin Kaiser <martin@kaiser.cx> wrote:
>
> At the moment, usbctrl_vendorreq's requesttype parameter must be set to
> 1 for reading and 0 for writing. It's then converted to the actual
> bmRequestType for the USB control request. We can simplify the code and
> avoid this conversion if the caller passes the actual bmRequestType.
>
> This patch is an adaptation of commit 788fde031027 ("staging: rtl8188eu:
> use actual request type as parameter") for the new r8188eu driver.
>
> Signed-off-by: Martin Kaiser <martin@kaiser.cx>
> ---
>  drivers/staging/r8188eu/hal/usb_ops_linux.c | 46 ++++++---------------
>  1 file changed, 12 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/staging/r8188eu/hal/usb_ops_linux.c b/drivers/staging/r8188eu/hal/usb_ops_linux.c
> index a11a0597e515..dccb9fd34777 100644
> --- a/drivers/staging/r8188eu/hal/usb_ops_linux.c
> +++ b/drivers/staging/r8188eu/hal/usb_ops_linux.c
> @@ -15,7 +15,6 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
>         struct usb_device *udev = dvobjpriv->pusbdev;
>         unsigned int pipe;
>         int status = 0;
> -       u8 reqtype;
>         u8 *pIo_buf;
>         int vendorreq_times = 0;
>
> @@ -44,26 +43,24 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
>         while (++vendorreq_times <= MAX_USBCTRL_VENDORREQ_TIMES) {
>                 memset(pIo_buf, 0, len);
>
> -               if (requesttype == 0x01) {
> +               if (requesttype == REALTEK_USB_VENQT_READ) {
>                         pipe = usb_rcvctrlpipe(udev, 0);/* read_in */
> -                       reqtype =  REALTEK_USB_VENQT_READ;
>                 } else {
>                         pipe = usb_sndctrlpipe(udev, 0);/* write_out */
> -                       reqtype =  REALTEK_USB_VENQT_WRITE;
>                         memcpy(pIo_buf, pdata, len);
>                 }
>
>                 status = usb_control_msg(udev, pipe, REALTEK_USB_VENQT_CMD_REQ,
> -                                        reqtype, value, REALTEK_USB_VENQT_CMD_IDX,
> +                                        requesttype, value, REALTEK_USB_VENQT_CMD_IDX,
>                                          pIo_buf, len, RTW_USB_CONTROL_MSG_TIMEOUT);
>
>                 if (status == len) {   /*  Success this control transfer. */
>                         rtw_reset_continual_urb_error(dvobjpriv);
> -                       if (requesttype == 0x01)
> +                       if (requesttype == REALTEK_USB_VENQT_READ)
>                                 memcpy(pdata, pIo_buf,  len);
>                 } else { /*  error cases */
>                         DBG_88E("reg 0x%x, usb %s %u fail, status:%d value=0x%x, vendorreq_times:%d\n",
> -                               value, (requesttype == 0x01) ? "read" : "write",
> +                               value, (requesttype == REALTEK_USB_VENQT_READ) ? "read" : "write",
>                                 len, status, *(u32 *)pdata, vendorreq_times);
>
>                         if (status < 0) {
> @@ -75,7 +72,7 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
>                                 }
>                         } else { /*  status != len && status >= 0 */
>                                 if (status > 0) {
> -                                       if (requesttype == 0x01) {
> +                                       if (requesttype == REALTEK_USB_VENQT_READ) {
>                                                 /*  For Control read transfer, we have to copy the read data from pIo_buf to pdata. */
>                                                 memcpy(pdata, pIo_buf,  len);
>                                         }
> @@ -101,19 +98,16 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
>
>  static u8 usb_read8(struct intf_hdl *pintfhdl, u32 addr)
>  {
> -       u8 requesttype;
>         u16 wvalue;
>         u16 len;
>         u8 data = 0;
>
>
>
> -       requesttype = 0x01;/* read_in */
> -
>         wvalue = (u16)(addr & 0x0000ffff);
>         len = 1;
>
> -       usbctrl_vendorreq(pintfhdl, wvalue, &data, len, requesttype);
> +       usbctrl_vendorreq(pintfhdl, wvalue, &data, len, REALTEK_USB_VENQT_READ);
>
>
>
> @@ -123,57 +117,49 @@ static u8 usb_read8(struct intf_hdl *pintfhdl, u32 addr)
>
>  static u16 usb_read16(struct intf_hdl *pintfhdl, u32 addr)
>  {
> -       u8 requesttype;
>         u16 wvalue;
>         u16 len;
>         __le32 data;
>
> -       requesttype = 0x01;/* read_in */
>         wvalue = (u16)(addr & 0x0000ffff);
>         len = 2;
> -       usbctrl_vendorreq(pintfhdl, wvalue, &data, len, requesttype);
> +       usbctrl_vendorreq(pintfhdl, wvalue, &data, len, REALTEK_USB_VENQT_READ);
>
>         return (u16)(le32_to_cpu(data) & 0xffff);
>  }
>
>  static u32 usb_read32(struct intf_hdl *pintfhdl, u32 addr)
>  {
> -       u8 requesttype;
>         u16 wvalue;
>         u16 len;
>         __le32 data;
>
> -       requesttype = 0x01;/* read_in */
> -
>         wvalue = (u16)(addr & 0x0000ffff);
>         len = 4;
>
> -       usbctrl_vendorreq(pintfhdl, wvalue, &data, len, requesttype);
> +       usbctrl_vendorreq(pintfhdl, wvalue, &data, len, REALTEK_USB_VENQT_READ);
>
>         return le32_to_cpu(data);
>  }
>
>  static int usb_write8(struct intf_hdl *pintfhdl, u32 addr, u8 val)
>  {
> -       u8 requesttype;
>         u16 wvalue;
>         u16 len;
>         u8 data;
>         int ret;
>
>
> -       requesttype = 0x00;/* write_out */
>         wvalue = (u16)(addr & 0x0000ffff);
>         len = 1;
>         data = val;
> -       ret = usbctrl_vendorreq(pintfhdl, wvalue, &data, len, requesttype);
> +       ret = usbctrl_vendorreq(pintfhdl, wvalue, &data, len, REALTEK_USB_VENQT_WRITE);
>
>         return ret;
>  }
>
>  static int usb_write16(struct intf_hdl *pintfhdl, u32 addr, u16 val)
>  {
> -       u8 requesttype;
>         u16 wvalue;
>         u16 len;
>         __le32 data;
> @@ -181,14 +167,12 @@ static int usb_write16(struct intf_hdl *pintfhdl, u32 addr, u16 val)
>
>
>
> -       requesttype = 0x00;/* write_out */
> -
>         wvalue = (u16)(addr & 0x0000ffff);
>         len = 2;
>
>         data = cpu_to_le32(val & 0x0000ffff);
>
> -       ret = usbctrl_vendorreq(pintfhdl, wvalue, &data, len, requesttype);
> +       ret = usbctrl_vendorreq(pintfhdl, wvalue, &data, len, REALTEK_USB_VENQT_WRITE);
>
>
>
> @@ -197,7 +181,6 @@ static int usb_write16(struct intf_hdl *pintfhdl, u32 addr, u16 val)
>
>  static int usb_write32(struct intf_hdl *pintfhdl, u32 addr, u32 val)
>  {
> -       u8 requesttype;
>         u16 wvalue;
>         u16 len;
>         __le32 data;
> @@ -205,13 +188,11 @@ static int usb_write32(struct intf_hdl *pintfhdl, u32 addr, u32 val)
>
>
>
> -       requesttype = 0x00;/* write_out */
> -
>         wvalue = (u16)(addr & 0x0000ffff);
>         len = 4;
>         data = cpu_to_le32(val);
>
> -       ret = usbctrl_vendorreq(pintfhdl, wvalue, &data, len, requesttype);
> +       ret = usbctrl_vendorreq(pintfhdl, wvalue, &data, len, REALTEK_USB_VENQT_WRITE);
>
>
>
> @@ -220,7 +201,6 @@ static int usb_write32(struct intf_hdl *pintfhdl, u32 addr, u32 val)
>
>  static int usb_writeN(struct intf_hdl *pintfhdl, u32 addr, u32 length, u8 *pdata)
>  {
> -       u8 requesttype;
>         u16 wvalue;
>         u16 len;
>         u8 buf[VENDOR_CMD_MAX_DATA_LEN] = {0};
> @@ -228,13 +208,11 @@ static int usb_writeN(struct intf_hdl *pintfhdl, u32 addr, u32 length, u8 *pdata
>
>
>
> -       requesttype = 0x00;/* write_out */
> -
>         wvalue = (u16)(addr & 0x0000ffff);
>         len = length;
>         memcpy(buf, pdata, len);
>
> -       ret = usbctrl_vendorreq(pintfhdl, wvalue, buf, len, requesttype);
> +       ret = usbctrl_vendorreq(pintfhdl, wvalue, buf, len, REALTEK_USB_VENQT_WRITE);
>
>         return ret;
>  }
> --
> 2.20.1
>

Acked-by: Phillip Potter <phil@philpotter.co.uk>

Regards,
Phil

  reply	other threads:[~2021-08-21 17:46 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-21 16:48 [PATCH 01/10] staging: r8188eu: remove unnecessary cast Martin Kaiser
2021-08-21 16:48 ` [PATCH 02/10] staging: r8188eu: remove unused define Martin Kaiser
2021-08-21 17:27   ` Phillip Potter
2021-08-22 11:56   ` Michael Straube
2021-08-21 16:48 ` [PATCH 03/10] staging: rtl8188eu: use actual request type as parameter Martin Kaiser
2021-08-21 17:44   ` Phillip Potter [this message]
2021-08-22 12:08   ` Michael Straube
2021-08-21 16:48 ` [PATCH 04/10] staging: r8188eu: rewrite usb vendor request defines Martin Kaiser
2021-08-21 17:45   ` Phillip Potter
2021-08-22 12:18   ` Michael Straube
2021-08-21 16:48 ` [PATCH 05/10] staging: r8188eu: remove an unused enum Martin Kaiser
2021-08-21 17:29   ` Phillip Potter
2021-08-22 12:19   ` Michael Straube
2021-08-21 16:48 ` [PATCH 06/10] staging: r8188eu: clean up the usb_readXY functions Martin Kaiser
2021-08-21 17:45   ` Phillip Potter
2021-08-22 12:25   ` Michael Straube
2021-08-21 16:48 ` [PATCH 07/10] staging: r8188eu: clean up the usb_writeXY functions Martin Kaiser
2021-08-21 17:46   ` Phillip Potter
2021-08-22 12:27   ` Michael Straube
2021-08-21 16:48 ` [PATCH 08/10] staging: r8188eu: clean up the usb_writeN Martin Kaiser
2021-08-21 17:47   ` Phillip Potter
2021-08-22 13:24   ` Michael Straube
2021-08-22 16:58     ` Martin Kaiser
2021-08-22 17:17       ` Michael Straube
2021-08-21 16:48 ` [PATCH 09/10] staging: r8188eu: remove unused members of struct _io_ops Martin Kaiser
2021-08-21 17:29   ` Phillip Potter
2021-08-22 13:28   ` Michael Straube
2021-08-21 16:48 ` [PATCH 10/10] staging: r8188eu: set pipe only once Martin Kaiser
2021-08-21 17:47   ` Phillip Potter
2021-08-22 14:05   ` Michael Straube
2021-08-21 17:27 ` [PATCH 01/10] staging: r8188eu: remove unnecessary cast Phillip Potter
2021-08-22 17:04   ` Martin Kaiser
2021-08-22 23:49     ` Phillip Potter
2021-08-22 11:54 ` Michael Straube

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAA=Fs0=k5GDmML7xy8PFwTKEWTDnO7KbWwv5vyO-sNUz0aO33A@mail.gmail.com' \
    --to=phil@philpotter.co.uk \
    --cc=Larry.Finger@lwfinger.net \
    --cc=dan.carpenter@oracle.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=martin@kaiser.cx \
    --cc=straube.linux@gmail.com \
    --subject='Re: [PATCH 03/10] staging: rtl8188eu: use actual request type as parameter' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).