LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Phillip Potter <phil@philpotter.co.uk>
To: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	"open list:STAGING SUBSYSTEM" <linux-staging@lists.linux.dev>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Pavel Skripkin <paskripkin@gmail.com>
Subject: Re: [PATCH 1/2] staging: r8188eu: Use usb_control_msg_recv/send() in usbctrl_vendorreq()
Date: Tue, 24 Aug 2021 01:08:49 +0100	[thread overview]
Message-ID: <CAA=Fs0ki91VvBOd2Wd59KqeCN+BmF-eWv+r0sH+e3fUG61Zxsg@mail.gmail.com> (raw)
In-Reply-To: <20210823223751.25104-2-fmdefrancesco@gmail.com>

On Mon, 23 Aug 2021 at 23:38, Fabio M. De Francesco
<fmdefrancesco@gmail.com> wrote:
>
> Replace usb_control_msg() with the new usb_control_msg_recv() and
> usb_control_msg_send() API of USB Core in usbctrl_vendorreq().
>
> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
> ---
>
> Thanks to Pavel Skripkin <paskripkin@gmail.com> for his review of the
> RFC patch.
>
> drivers/staging/r8188eu/hal/usb_ops_linux.c | 25 ++++++++++-----------
> 1 file changed, 12 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/staging/r8188eu/hal/usb_ops_linux.c b/drivers/staging/r8188eu/hal/usb_ops_linux.c
> index a93d5cfe4635..6f51660b967a 100644
> --- a/drivers/staging/r8188eu/hal/usb_ops_linux.c
> +++ b/drivers/staging/r8188eu/hal/usb_ops_linux.c
> @@ -15,9 +15,8 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
>         struct adapter  *adapt = pintfhdl->padapter;
>         struct dvobj_priv  *dvobjpriv = adapter_to_dvobj(adapt);
>         struct usb_device *udev = dvobjpriv->pusbdev;
> -       unsigned int pipe;
> +       u8 pipe;
>         int status = 0;
> -       u8 reqtype;
>         u8 *pIo_buf;
>         int vendorreq_times = 0;
>
> @@ -44,22 +43,22 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
>         }
>
>         while (++vendorreq_times <= MAX_USBCTRL_VENDORREQ_TIMES) {
> -               memset(pIo_buf, 0, len);
> -
>                 if (requesttype == 0x01) {
> -                       pipe = usb_rcvctrlpipe(udev, 0);/* read_in */
> -                       reqtype =  REALTEK_USB_VENQT_READ;
> +                       status = usb_control_msg_recv(udev, pipe, REALTEK_USB_VENQT_CMD_REQ,
> +                                                     REALTEK_USB_VENQT_READ, value,
> +                                                     REALTEK_USB_VENQT_CMD_IDX,
> +                                                     pIo_buf, len, RTW_USB_CONTROL_MSG_TIMEOUT,
> +                                                     GFP_KERNEL);
>                 } else {
> -                       pipe = usb_sndctrlpipe(udev, 0);/* write_out */
> -                       reqtype =  REALTEK_USB_VENQT_WRITE;
>                         memcpy(pIo_buf, pdata, len);
> +                       status = usb_control_msg_send(udev, pipe, REALTEK_USB_VENQT_CMD_REQ,
> +                                                     REALTEK_USB_VENQT_WRITE, value,
> +                                                     REALTEK_USB_VENQT_CMD_IDX,
> +                                                     pIo_buf, len, RTW_USB_CONTROL_MSG_TIMEOUT,
> +                                                     GFP_KERNEL);
>                 }
>
> -               status = usb_control_msg(udev, pipe, REALTEK_USB_VENQT_CMD_REQ,
> -                                        reqtype, value, REALTEK_USB_VENQT_CMD_IDX,
> -                                        pIo_buf, len, RTW_USB_CONTROL_MSG_TIMEOUT);
> -
> -               if (status == len) {   /*  Success this control transfer. */
> +               if (!status) {   /*  Success this control transfer. */
>                         rtw_reset_continual_urb_error(dvobjpriv);
>                         if (requesttype == 0x01)
>                                 memcpy(pdata, pIo_buf,  len);
> --
> 2.32.0
>

Dear Fabio,

Thanks for the patch. Sorry, but for some reason with my N10-Nano I
can't get a connection at all with this patch applied - it just won't
associate with my network. Interface shows up and no OOPS in log, but
just disassociates/no IP address/interface down etc. so perhaps
semantics differ slightly here somehow? Tried two separate
rollbacks/builds/runs just to make sure I wasn't losing my mind :-)

Regards,
Phil

  reply	other threads:[~2021-08-24  0:09 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-23 22:37 [PATCH 0/2] staging: r8188eu: Use new usb_control_msg_recv/send() Fabio M. De Francesco
2021-08-23 22:37 ` [PATCH 1/2] staging: r8188eu: Use usb_control_msg_recv/send() in usbctrl_vendorreq() Fabio M. De Francesco
2021-08-24  0:08   ` Phillip Potter [this message]
2021-08-24  0:31     ` Fabio M. De Francesco
2021-08-24  1:38       ` Fabio M. De Francesco
2021-08-24  2:01         ` Fabio M. De Francesco
2021-08-24  5:44           ` Christophe JAILLET
2021-08-24 10:38             ` Fabio M. De Francesco
2021-08-24 17:03               ` Christophe JAILLET
2021-08-24 21:59         ` Phillip Potter
2021-08-24  8:13   ` Pavel Skripkin
2021-08-24  8:53     ` Fabio M. De Francesco
2021-08-24 11:07       ` Pavel Skripkin
2021-08-24 12:01         ` Fabio M. De Francesco
2021-08-24 12:09           ` Pavel Skripkin
2021-08-24 14:55             ` Fabio M. De Francesco
2021-08-23 22:37 ` [PATCH 2/2] staging: r8188eu: Make some clean-ups " Fabio M. De Francesco
2021-08-24  0:10   ` Phillip Potter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAA=Fs0ki91VvBOd2Wd59KqeCN+BmF-eWv+r0sH+e3fUG61Zxsg@mail.gmail.com' \
    --to=phil@philpotter.co.uk \
    --cc=Larry.Finger@lwfinger.net \
    --cc=fmdefrancesco@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=paskripkin@gmail.com \
    --subject='Re: [PATCH 1/2] staging: r8188eu: Use usb_control_msg_recv/send() in usbctrl_vendorreq()' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).