LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Roger Heflin <rogerheflin@gmail.com>
To: "McKay, Luke" <Luke.McKay@aeroflex.com>
Cc: Andrey Utkin <andrey.utkin@corp.bluecherry.net>,
	Andrey Utkin <andrey.krieger.utkin@gmail.com>,
	Stephen Hemminger <stephen@networkplumber.org>,
	"kernel-mentors@selenic.com" <kernel-mentors@selenic.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	kernelnewbies <kernelnewbies@kernelnewbies.org>
Subject: Re: Question on MSI support in PCI and PCI-E devices
Date: Wed, 4 Mar 2015 10:30:58 -0600	[thread overview]
Message-ID: <CAAMCDeeFcZxtPDYt-ChJ_jb1HaL5NNYagYat1QyQd9L+j7AU8Q@mail.gmail.com> (raw)
In-Reply-To: <41F544F51A709A4AA2914581E1219BDCBE4FD2@SEC-MBX-01.aeroflex.corp>

I know from some data I have seen that between the Intel Sandy Bridge
and Intel Ivy Bridge the same motherboards stopped delivering INTx
reliably (int lost under load around 1x every 30 days, driver and
firmware has no method to recover from failure)   We had to transition
to using MSI on some PCI cards that had this issue. Our issue was
duplicated on a large number of different physical machines so if it
was a hardware error is was a lot of different physical machines that
had the defect.

On Wed, Mar 4, 2015 at 10:03 AM, McKay, Luke <Luke.McKay@aeroflex.com> wrote:
> I don't personally know of any PCI drivers that use polling instead of interrupts, since that would really mean the hardware is broke.
>
> Basically all you need to do is create a timer, and have it's callback set to your driver routine that can check the device status registers to determine if there is work to be done.  The status register(s) would be the same indicators that should have generated an interrupt.
>
> Regards,
> Luke
>
>
> --
> Luke McKay
> Senior Engineer
> Cobham AvComm
> T : +1 (316) 529 5585
>
> Please consider the environment before printing this email
>
>
>
> -----Original Message-----
> From: Andrey Utkin [mailto:andrey.utkin@corp.bluecherry.net]
> Sent: Tuesday, March 03, 2015 8:29 AM
> To: McKay, Luke
> Cc: Andrey Utkin; Stephen Hemminger; kernel-mentors@selenic.com; linux-kernel@vger.kernel.org; kernelnewbies
> Subject: Re: Question on MSI support in PCI and PCI-E devices
>
> On Mon, Mar 2, 2015 at 4:02 PM, McKay, Luke <Luke.McKay@aeroflex.com> wrote:
>> It doesn't appear that your device supports MSI.  If it did lspci -v should list the MSI capability and whether or not it is enabled.
>>
>> i.e. Something like...
>> Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
>>
>> Without a listing that shows the capability is present, there is nothing to enable.
>>
>> Have you tried polling instead of using interrupts?  Definitely not ideal, but it might help you to determine whether hardware is dropping/missing an interrupt or whether the hardware is being completely hung up.
>>
>> Do you know if this missing interrupt is occurring in other systems as well?  How about whether it happens with different boards in the same system?  Answers to these questions would help to determine whether you might have a defective board, or some sort of incompatibility with the system.
>
> We have just three setups reproducing this. We have no boards for replacement experiments, unfortunately.
> Polling instead of using interrupts sounds interesting. Is there an example of such usage in any other PCI device driver?
>
> --
> Bluecherry developer.
>
>
> Aeroflex is now a Cobham company

  reply	other threads:[~2015-03-04 16:31 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <f236217608b24a5e976628fe31d41a03@BRMWP-EXMB11.corp.brocade.com>
2015-02-12 14:48 ` Stephen Hemminger
2015-02-12 15:11   ` Andrey Utkin
2015-03-02 14:02     ` McKay, Luke
2015-03-03 14:29       ` Andrey Utkin
2015-03-04 16:03         ` McKay, Luke
2015-03-04 16:30           ` Roger Heflin [this message]
2015-03-04 17:04             ` McKay, Luke
2015-03-04 17:18               ` Roger Heflin
2015-02-11 18:19 Andrey Utkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAAMCDeeFcZxtPDYt-ChJ_jb1HaL5NNYagYat1QyQd9L+j7AU8Q@mail.gmail.com \
    --to=rogerheflin@gmail.com \
    --cc=Luke.McKay@aeroflex.com \
    --cc=andrey.krieger.utkin@gmail.com \
    --cc=andrey.utkin@corp.bluecherry.net \
    --cc=kernel-mentors@selenic.com \
    --cc=kernelnewbies@kernelnewbies.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stephen@networkplumber.org \
    --subject='Re: Question on MSI support in PCI and PCI-E devices' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).