LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH 1/2] ASoC: dt-bindings: rt9120: Add initial bindings
@ 2021-10-05  1:16 cy_huang
  2021-10-05  1:16 ` [PATCH 2/2] ASoC: rt9120: Add rt9210 audio amplifier support cy_huang
  2021-10-05 11:49 ` [PATCH 1/2] ASoC: dt-bindings: rt9120: Add initial bindings Mark Brown
  0 siblings, 2 replies; 11+ messages in thread
From: cy_huang @ 2021-10-05  1:16 UTC (permalink / raw)
  To: oder_chiou, perex, tiwai, robh+dt
  Cc: lgirdwood, broonie, alsa-devel, linux-kernel, cy_huang,
	devicetree, allen_lin

From: ChiYuan Huang <cy_huang@richtek.com>

Add initial bindings for rt9120 audio amplifier.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
---
 .../devicetree/bindings/sound/richtek,rt9120.yaml  | 53 ++++++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/richtek,rt9120.yaml

diff --git a/Documentation/devicetree/bindings/sound/richtek,rt9120.yaml b/Documentation/devicetree/bindings/sound/richtek,rt9120.yaml
new file mode 100644
index 00000000..4d47a78
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/richtek,rt9120.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/richtek,rt9120.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT9120 Class-D audio amplifier
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT9120 is a high efficiency, I2S-input, stereo audio power amplifier
+  delivering 2*20W into 8 Ohm BTL speaker loads. It supports the wide input
+  voltage  range from 4.5V to 26.4V to meet the need on most common
+  applications like as TV, monitors. home entertainment, electronic music
+  equipment.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt9120
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  pwdnn-gpios:
+    description: GPIO used for power down, low active
+    maxItems: 1
+
+  richtek,use-dvdd-1p8v:
+    description: Indicate DVDD 1P8V is used, default for 3P3V or 5V design
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      rt9120@1a {
+        compatible = "richtek,rt9120";
+        reg = <0x1a>;
+        pwdnn-gpios = <&gpio26 2 0>;
+        richtek,use-dvdd-1p8v;
+      };
+    };
-- 
2.7.4


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH 2/2] ASoC: rt9120: Add rt9210 audio amplifier support
  2021-10-05  1:16 [PATCH 1/2] ASoC: dt-bindings: rt9120: Add initial bindings cy_huang
@ 2021-10-05  1:16 ` cy_huang
  2021-10-05 11:54   ` Mark Brown
  2021-10-05 11:49 ` [PATCH 1/2] ASoC: dt-bindings: rt9120: Add initial bindings Mark Brown
  1 sibling, 1 reply; 11+ messages in thread
From: cy_huang @ 2021-10-05  1:16 UTC (permalink / raw)
  To: oder_chiou, perex, tiwai, robh+dt
  Cc: lgirdwood, broonie, alsa-devel, linux-kernel, cy_huang,
	devicetree, allen_lin

From: ChiYuan Huang <cy_huang@richtek.com>

Add rt9120 audio amplifier support.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
---
 sound/soc/codecs/Kconfig  |  10 +
 sound/soc/codecs/Makefile |   2 +
 sound/soc/codecs/rt9120.c | 491 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 503 insertions(+)
 create mode 100644 sound/soc/codecs/rt9120.c

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 82ee233..155050d 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -187,6 +187,7 @@ config SND_SOC_ALL_CODECS
 	imply SND_SOC_RT715_SDCA_SDW
 	imply SND_SOC_RT1308_SDW
 	imply SND_SOC_RT1316_SDW
+	imply SND_SOC_RT9120
 	imply SND_SOC_SDW_MOCKUP
 	imply SND_SOC_SGTL5000
 	imply SND_SOC_SI476X
@@ -1288,6 +1289,15 @@ config SND_SOC_RT715_SDCA_SDW
 	select REGMAP_SOUNDWIRE
 	select REGMAP_SOUNDWIRE_MBQ
 
+config SND_SOC_RT9120
+	tristate "Richtek RT9120 Stereo Class-D Amplifier"
+	depends on I2C
+	select REGMAP_I2C
+	select GPIOLIB
+	help
+	  Enable support for Richtek RT9120 20W, stereo, inductor-less,
+	  high-efficiency Class-D audio amplifier.
+
 config SND_SOC_SDW_MOCKUP
 	tristate "SoundWire mockup codec"
 	depends on EXPERT
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 8dcea2c..5ba164d 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -203,6 +203,7 @@ snd-soc-rt711-objs := rt711.o rt711-sdw.o
 snd-soc-rt711-sdca-objs := rt711-sdca.o rt711-sdca-sdw.o
 snd-soc-rt715-objs := rt715.o rt715-sdw.o
 snd-soc-rt715-sdca-objs := rt715-sdca.o rt715-sdca-sdw.o
+snd-soc-rt9120-objs := rt9120.o
 snd-soc-sdw-mockup-objs := sdw-mockup.o
 snd-soc-sgtl5000-objs := sgtl5000.o
 snd-soc-alc5623-objs := alc5623.o
@@ -531,6 +532,7 @@ obj-$(CONFIG_SND_SOC_RT711)     += snd-soc-rt711.o
 obj-$(CONFIG_SND_SOC_RT711_SDCA_SDW)     += snd-soc-rt711-sdca.o
 obj-$(CONFIG_SND_SOC_RT715)     += snd-soc-rt715.o
 obj-$(CONFIG_SND_SOC_RT715_SDCA_SDW)     += snd-soc-rt715-sdca.o
+obj-$(CONFIG_SND_SOC_RT9120)	+= snd-soc-rt9120.o
 obj-$(CONFIG_SND_SOC_SDW_MOCKUP)     += snd-soc-sdw-mockup.o
 obj-$(CONFIG_SND_SOC_SGTL5000)  += snd-soc-sgtl5000.o
 obj-$(CONFIG_SND_SOC_SIGMADSP)	+= snd-soc-sigmadsp.o
diff --git a/sound/soc/codecs/rt9120.c b/sound/soc/codecs/rt9120.c
new file mode 100644
index 00000000..19a143b
--- /dev/null
+++ b/sound/soc/codecs/rt9120.c
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/property.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+
+#define RT9120_REG_DEVID	0x00
+#define RT9120_REG_I2SFMT	0x02
+#define RT9120_REG_I2SWL	0x03
+#define RT9120_REG_SDIOSEL	0x04
+#define RT9120_REG_SYSCTL	0x05
+#define RT9120_REG_SPKGAIN	0x07
+#define RT9120_REG_VOLRAMP	0x0A
+#define RT9120_REG_ERRRPT	0x10
+#define RT9120_REG_MSVOL	0x20
+#define RT9120_REG_SWRESET	0x40
+#define RT9120_REG_INTERNAL0	0x65
+#define RT9120_REG_INTERNAL1	0x69
+#define RT9120_REG_UVPOPT	0x6C
+
+#define RT9120_VID_MASK		GENMASK(15,8)
+#define RT9120_SWRST_MASK	BIT(7)
+#define RT9120_MUTE_MASK	GENMASK(5, 4)
+#define RT9120_I2SFMT_MASK	GENMASK(4, 2)
+#define RT9120_I2SFMT_SHIFT	2
+#define RT9120_CFG_FMT_I2S	0
+#define RT9120_CFG_FMT_LEFTJ	1
+#define RT9120_CFG_FMT_RIGHTJ	2
+#define RT9120_CFG_FMT_DSPA	3
+#define RT9120_CFG_FMT_DSPB	7
+#define RT9120_AUDBIT_MASK	GENMASK(1, 0)
+#define RT9120_CFG_AUDBIT_16	0
+#define RT9120_CFG_AUDBIT_20	1
+#define RT9120_CFG_AUDBIT_24	2
+#define RT9120_AUDWL_MASK	GENMASK(5, 0)
+#define RT9120_CFG_WORDLEN_16	16
+#define RT9120_CFG_WORDLEN_24	24
+#define RT9120_CFG_WORDLEN_32	32
+#define RT9120_DVDD_UVSEL_MASK	GENMASK(5, 4)
+
+#define RT9120_VENDOR_ID	0x4200
+#define RT9120_RESET_WAITMS	20
+#define RT9120_CHIPON_WAITMS	20
+#define RT9120_AMPON_WAITMS	50
+#define RT9120_AMPOFF_WAITMS	100
+
+/* 8000 to 192000 supported , only 176400 not support */
+#define RT9120_RATES_MASK	(SNDRV_PCM_RATE_8000_192000 &\
+				 ~SNDRV_PCM_RATE_176400)
+#define RT9120_FMTS_MASK	(SNDRV_PCM_FMTBIT_S16_LE |\
+				 SNDRV_PCM_FMTBIT_S24_LE |\
+				 SNDRV_PCM_FMTBIT_S32_LE)
+struct rt9120_data {
+	struct device *dev;
+	struct regmap *regmap;
+};
+
+/* 11bit [min,max,step] = [-103.9375dB, 24dB, 0.0625dB] */
+static const DECLARE_TLV_DB_SCALE(digital_gain, -1039375, 625, -1039375);
+
+static const char * const sdo_select_text[] = {
+	"NONE", "INTF", "FINAL", "RMS Detect"
+};
+
+static const struct soc_enum sdo_select_enum =
+	SOC_ENUM_SINGLE(RT9120_REG_SDIOSEL, 4, ARRAY_SIZE(sdo_select_text),
+			sdo_select_text);
+
+static const struct snd_kcontrol_new rt9120_snd_controls[] = {
+	SOC_SINGLE_TLV("MS Volume", RT9120_REG_MSVOL, 0, 2047, 1, digital_gain),
+	SOC_SINGLE("SPK Gain", RT9120_REG_SPKGAIN, 0, 7, 0),
+	SOC_SINGLE("PBTL Switch", RT9120_REG_SYSCTL, 3, 1, 0),
+	SOC_ENUM("SDO Select", sdo_select_enum),
+};
+
+static int internal_power_event(struct snd_soc_dapm_widget *w,
+				struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *comp = snd_soc_dapm_to_component(w->dapm);
+
+	if (event == SND_SOC_DAPM_PRE_PMU)
+		snd_soc_component_write(comp, RT9120_REG_ERRRPT, 0);
+	else if (event == SND_SOC_DAPM_POST_PMU)
+		msleep(RT9120_AMPON_WAITMS);
+	else if (event == SND_SOC_DAPM_POST_PMD)
+		msleep(RT9120_AMPOFF_WAITMS);
+
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget rt9120_dapm_widgets[] = {
+	SND_SOC_DAPM_MIXER("DMIX", SND_SOC_NOPM, 0, 0, NULL, 0),
+	SND_SOC_DAPM_DAC("LDAC", NULL, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_DAC("RDAC", NULL, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_SUPPLY("PWND", RT9120_REG_SYSCTL, 6, 1,
+			    internal_power_event, SND_SOC_DAPM_PRE_PMU |
+			    SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_PGA("SPKL PA", SND_SOC_NOPM, 0, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("SPKR PA", SND_SOC_NOPM, 0, 0, NULL, 0),
+	SND_SOC_DAPM_OUTPUT("SPKL"),
+	SND_SOC_DAPM_OUTPUT("SPKR"),
+};
+
+static const struct snd_soc_dapm_route rt9120_dapm_routes[] = {
+	{ "DMIX", NULL, "AIF Playback" },
+	/* SPKL */
+	{ "LDAC", NULL, "PWND" },
+	{ "LDAC", NULL, "DMIX" },
+	{ "SPKL PA", NULL, "LDAC" },
+	{ "SPKL", NULL, "SPKL PA" },
+	/* SPKR */
+	{ "RDAC", NULL, "PWND" },
+	{ "RDAC", NULL, "DMIX" },
+	{ "SPKR PA", NULL, "RDAC" },
+	{ "SPKR", NULL, "SPKR PA" },
+	/* Cap */
+	{ "AIF Capture", NULL, "LDAC" },
+	{ "AIF Capture", NULL, "RDAC" },
+};
+
+static int rt9120_codec_probe(struct snd_soc_component *comp)
+{
+	struct rt9120_data *data = snd_soc_component_get_drvdata(comp);
+
+	snd_soc_component_init_regmap(comp, data->regmap);
+
+	/* Internal setting */
+	snd_soc_component_write(comp, RT9120_REG_INTERNAL1, 0x03);
+	snd_soc_component_write(comp, RT9120_REG_INTERNAL0, 0x69);
+	/* Default config volume to 0dB */
+	snd_soc_component_write(comp, RT9120_REG_MSVOL, 0x180);
+	/* Mute by default */
+	snd_soc_component_update_bits(comp, RT9120_REG_VOLRAMP,
+				      RT9120_MUTE_MASK, RT9120_MUTE_MASK);
+	return 0;
+}
+
+static const struct snd_soc_component_driver rt9120_component_driver = {
+	.probe = rt9120_codec_probe,
+	.controls = rt9120_snd_controls,
+	.num_controls = ARRAY_SIZE(rt9120_snd_controls),
+	.dapm_widgets = rt9120_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(rt9120_dapm_widgets),
+	.dapm_routes = rt9120_dapm_routes,
+	.num_dapm_routes = ARRAY_SIZE(rt9120_dapm_routes),
+};
+
+static int rt9120_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+	struct snd_soc_component *comp = dai->component;
+	unsigned int format;
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		format = RT9120_CFG_FMT_I2S;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		format = RT9120_CFG_FMT_LEFTJ;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		format = RT9120_CFG_FMT_RIGHTJ;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		format = RT9120_CFG_FMT_DSPA;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		format = RT9120_CFG_FMT_DSPB;
+		break;
+	default:
+		dev_err(dai->dev, "Unknown dai format\n");
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(comp, RT9120_REG_I2SFMT,
+				      RT9120_I2SFMT_MASK,
+				      format << RT9120_I2SFMT_SHIFT);
+	return 0;
+}
+
+static int rt9120_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *param,
+			    struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *comp = dai->component;
+	unsigned int param_width, param_slot_width;
+	int width;
+
+	switch (width = params_width(param)) {
+	case 16:
+		param_width = RT9120_CFG_AUDBIT_16;
+		break;
+	case 20:
+		param_width = RT9120_CFG_AUDBIT_20;
+		break;
+	case 24:
+	case 32:
+		param_width = RT9120_CFG_AUDBIT_24;
+		break;
+	default:
+		dev_err(dai->dev, "Unsupported data width [%d]\n", width);
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(comp, RT9120_REG_I2SFMT,
+				      RT9120_AUDBIT_MASK, param_width);
+
+	switch (width = params_physical_width(param)) {
+	case 16:
+		param_slot_width = RT9120_CFG_WORDLEN_16;
+		break;
+	case 24:
+		param_slot_width = RT9120_CFG_WORDLEN_24;
+		break;
+	case 32:
+		param_slot_width = RT9120_CFG_WORDLEN_32;
+		break;
+	default:
+		dev_err(dai->dev, "Unsupported slot width [%d]\n", width);
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(comp, RT9120_REG_I2SWL,
+				      RT9120_AUDWL_MASK, param_slot_width);
+	return 0;
+}
+
+
+static int rt9120_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
+{
+	struct snd_soc_component *comp = dai->component;
+	unsigned int val = mute ? RT9120_MUTE_MASK : 0;
+
+	snd_soc_component_update_bits(comp, RT9120_REG_VOLRAMP,
+				      RT9120_MUTE_MASK, val);
+	return 0;
+}
+
+static const struct snd_soc_dai_ops rt9120_dai_ops = {
+	.set_fmt = rt9120_set_fmt,
+	.hw_params = rt9120_hw_params,
+	.mute_stream = rt9120_mute_stream,
+	.no_capture_mute = 1,
+};
+
+static struct snd_soc_dai_driver rt9120_dai = {
+	.name = "rt9120_aif",
+	.playback = {
+		.stream_name = "AIF Playback",
+		.rates = RT9120_RATES_MASK,
+		.formats = RT9120_FMTS_MASK,
+		.rate_max = 192000,
+		.rate_min = 8000,
+		.channels_min = 1,
+		.channels_max = 2,
+	},
+	.capture = {
+		.stream_name = "AIF Capture",
+		.rates = RT9120_RATES_MASK,
+		.formats = RT9120_FMTS_MASK,
+		.rate_max = 192000,
+		.rate_min = 8000,
+		.channels_min = 1,
+		.channels_max = 2,
+	},
+	.ops = &rt9120_dai_ops,
+	.symmetric_rate = 1,
+	.symmetric_sample_bits = 1,
+};
+
+static const struct regmap_range rt9120_rd_yes_ranges[] = {
+	regmap_reg_range(0x00, 0x0C),
+	regmap_reg_range(0x10, 0x15),
+	regmap_reg_range(0x20, 0x27),
+	regmap_reg_range(0x30, 0x38),
+	regmap_reg_range(0x3A, 0x40),
+	regmap_reg_range(0x65, 0x65),
+	regmap_reg_range(0x69, 0x69),
+	regmap_reg_range(0x6C, 0x6C)
+};
+
+static const struct regmap_access_table rt9120_rd_table = {
+	.yes_ranges = rt9120_rd_yes_ranges,
+	.n_yes_ranges = ARRAY_SIZE(rt9120_rd_yes_ranges),
+};
+
+static const struct regmap_range rt9120_wr_yes_ranges[] = {
+	regmap_reg_range(0x00, 0x00),
+	regmap_reg_range(0x02, 0x0A),
+	regmap_reg_range(0x10, 0x15),
+	regmap_reg_range(0x20, 0x27),
+	regmap_reg_range(0x30, 0x38),
+	regmap_reg_range(0x3A, 0x3D),
+	regmap_reg_range(0x40, 0x40),
+	regmap_reg_range(0x65, 0x65),
+	regmap_reg_range(0x69, 0x69),
+	regmap_reg_range(0x6C, 0x6C)
+};
+
+static const struct regmap_access_table rt9120_wr_table = {
+	.yes_ranges = rt9120_wr_yes_ranges,
+	.n_yes_ranges = ARRAY_SIZE(rt9120_wr_yes_ranges),
+};
+
+static int rt9120_get_reg_size(unsigned int reg)
+{
+	switch (reg) {
+	case 0x00:
+	case 0x09:
+	case 0x20 ... 0x27:
+		return 2;
+	case 0x30 ... 0x3D:
+		return 3;
+	case 0x3E ... 0x3F:
+		return 4;
+	default:
+		return 1;
+	}
+}
+
+static int rt9120_reg_read(void *context, unsigned int reg, unsigned int *val)
+{
+	struct rt9120_data *data = context;
+	struct i2c_client *i2c = to_i2c_client(data->dev);
+	int size = rt9120_get_reg_size(reg);
+	u8 raw[4] = {0};
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(i2c, reg, size, raw);
+	if (ret < 0)
+		return ret;
+	else if (ret != size)
+		return -EIO;
+
+	switch (size) {
+	case 4:
+		*val = be32_to_cpup((__be32 *)raw);
+		break;
+	case 3:
+		*val = raw[0] << 16 | raw[1] << 8 | raw[0];
+		break;
+	case 2:
+		*val = be16_to_cpup((__be16 *)raw);
+		break;
+	default:
+		*val = raw[0];
+	}
+
+	return 0;
+}
+
+static int rt9120_reg_write(void *context, unsigned int reg, unsigned int val)
+{
+	struct rt9120_data *data = context;
+	struct i2c_client *i2c = to_i2c_client(data->dev);
+	int size = rt9120_get_reg_size(reg);
+	__be32 be32_val;
+	u8 *rawp = (u8 *)&be32_val;
+	int offs = 4 - size;
+
+	be32_val = cpu_to_be32(val);
+	return i2c_smbus_write_i2c_block_data(i2c, reg, size, rawp + offs);
+}
+
+static const struct regmap_config rt9120_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.max_register = RT9120_REG_UVPOPT,
+
+	.reg_read = rt9120_reg_read,
+	.reg_write = rt9120_reg_write,
+
+	.wr_table = &rt9120_wr_table,
+	.rd_table = &rt9120_rd_table,
+};
+
+static int rt9120_check_vendor_info(struct rt9120_data *data)
+{
+	unsigned int devid;
+	int ret;
+
+	ret = regmap_read(data->regmap, RT9120_REG_DEVID, &devid);
+	if (ret)
+		return ret;
+
+	if ((devid & RT9120_VID_MASK) != RT9120_VENDOR_ID) {
+		dev_err(data->dev, "DEVID not correct [0x%04x]\n", devid);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int rt9120_do_register_reset(struct rt9120_data *data)
+{
+	int ret;
+
+	ret = regmap_write(data->regmap, RT9120_REG_SWRESET,
+			   RT9120_SWRST_MASK);
+	if (ret)
+		return ret;
+
+	msleep(RT9120_RESET_WAITMS);
+	return 0;
+}
+
+static int rt9120_probe(struct i2c_client *i2c)
+{
+	struct rt9120_data *data;
+	struct gpio_desc *pwdnn_gpio;
+	bool dvdd_1p8v;
+	int ret;
+
+	data = devm_kzalloc(&i2c->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->dev = &i2c->dev;
+	i2c_set_clientdata(i2c, data);
+
+	pwdnn_gpio = devm_gpiod_get_optional(&i2c->dev, "pwdnn",
+					     GPIOD_OUT_HIGH);
+	if (IS_ERR(pwdnn_gpio)) {
+		dev_err(&i2c->dev, "Failed to initialize 'pwdnn' gpio\n");
+		return PTR_ERR(pwdnn_gpio);
+	} else if (pwdnn_gpio) {
+		dev_dbg(&i2c->dev, "'pwdnn' from low to high, wait chip on\n");
+		msleep(RT9120_CHIPON_WAITMS);
+	}
+
+	data->regmap = devm_regmap_init(&i2c->dev, NULL, data,
+					&rt9120_regmap_config);
+	if (IS_ERR(data->regmap)) {
+		ret = PTR_ERR(data->regmap);
+		dev_err(&i2c->dev, "Failed to init regmap [%d]\n", ret);
+		return ret;
+	}
+
+	ret = rt9120_check_vendor_info(data);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to check vendor info\n");
+		return ret;
+	}
+
+	ret = rt9120_do_register_reset(data);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to do register reset\n");
+		return ret;
+	}
+
+	dvdd_1p8v = device_property_present(&i2c->dev, "richtek,use-dvdd-1p8v");
+	if (dvdd_1p8v) {
+		ret = regmap_update_bits(data->regmap, RT9120_REG_UVPOPT,
+					 RT9120_DVDD_UVSEL_MASK, 0);
+		if (ret) {
+			dev_err(&i2c->dev, "Failed to config DVDD for 1P8V\n");
+			return ret;
+		}
+	}
+
+	return devm_snd_soc_register_component(&i2c->dev,
+					       &rt9120_component_driver,
+					       &rt9120_dai, 1);
+}
+
+static const struct of_device_id __maybe_unused rt9120_device_table[] = {
+	{ .compatible = "richtek,rt9120", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rt9120_device_table);
+
+static struct i2c_driver rt9120_driver = {
+	.driver = {
+		.name = "rt9120",
+		.of_match_table = rt9120_device_table,
+	},
+	.probe_new = rt9120_probe,
+};
+module_i2c_driver(rt9120_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("RT9120 Audio Amplifier Driver");
+MODULE_LICENSE("GPL");
-- 
2.7.4


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 1/2] ASoC: dt-bindings: rt9120: Add initial bindings
  2021-10-05  1:16 [PATCH 1/2] ASoC: dt-bindings: rt9120: Add initial bindings cy_huang
  2021-10-05  1:16 ` [PATCH 2/2] ASoC: rt9120: Add rt9210 audio amplifier support cy_huang
@ 2021-10-05 11:49 ` Mark Brown
       [not found]   ` <CADiBU39dvKS_a5FDgw9yMVFe8Uycn6bfjGwBWq+7MN_DdxkL1g@mail.gmail.com>
  1 sibling, 1 reply; 11+ messages in thread
From: Mark Brown @ 2021-10-05 11:49 UTC (permalink / raw)
  To: cy_huang
  Cc: oder_chiou, perex, tiwai, robh+dt, lgirdwood, alsa-devel,
	linux-kernel, cy_huang, devicetree, allen_lin

[-- Attachment #1: Type: text/plain, Size: 307 bytes --]

On Tue, Oct 05, 2021 at 09:16:54AM +0800, cy_huang wrote:

> +  richtek,use-dvdd-1p8v:
> +    description: Indicate DVDD 1P8V is used, default for 3P3V or 5V design
> +    type: boolean

I would expect this to be done through the regulator bindings, they
would allow the driver to query the supply voltage.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 2/2] ASoC: rt9120: Add rt9210 audio amplifier support
  2021-10-05  1:16 ` [PATCH 2/2] ASoC: rt9120: Add rt9210 audio amplifier support cy_huang
@ 2021-10-05 11:54   ` Mark Brown
       [not found]     ` <CADiBU38X6nY1D7NpgW8+61AX6rUU7jngnPagryDKxUAKdtGjAg@mail.gmail.com>
  0 siblings, 1 reply; 11+ messages in thread
From: Mark Brown @ 2021-10-05 11:54 UTC (permalink / raw)
  To: cy_huang
  Cc: oder_chiou, perex, tiwai, robh+dt, lgirdwood, alsa-devel,
	linux-kernel, cy_huang, devicetree, allen_lin

[-- Attachment #1: Type: text/plain, Size: 917 bytes --]

On Tue, Oct 05, 2021 at 09:16:55AM +0800, cy_huang wrote:

> +static const char * const sdo_select_text[] = {
> +	"NONE", "INTF", "FINAL", "RMS Detect"
> +};

Why not None and Final?

> +	if (event == SND_SOC_DAPM_PRE_PMU)
> +		snd_soc_component_write(comp, RT9120_REG_ERRRPT, 0);
> +	else if (event == SND_SOC_DAPM_POST_PMU)
> +		msleep(RT9120_AMPON_WAITMS);
> +	else if (event == SND_SOC_DAPM_POST_PMD)
> +		msleep(RT9120_AMPOFF_WAITMS);

This should be a switch statement, it'd be clearer.

> +	/* Default config volume to 0dB */
> +	snd_soc_component_write(comp, RT9120_REG_MSVOL, 0x180);
> +	/* Mute by default */
> +	snd_soc_component_update_bits(comp, RT9120_REG_VOLRAMP,
> +				      RT9120_MUTE_MASK, RT9120_MUTE_MASK);

As ever you should leave the defaults at whatever the hardware defaults
to, the defaults for one machine may not be suitable for another so we
shouldn't be trying to do that in software.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 1/2] ASoC: dt-bindings: rt9120: Add initial bindings
       [not found]     ` <YVxFMaPhZdAFniMa@sirena.org.uk>
@ 2021-10-05 12:39       ` ChiYuan Huang
  2021-10-06  8:47         ` ChiYuan Huang
  0 siblings, 1 reply; 11+ messages in thread
From: ChiYuan Huang @ 2021-10-05 12:39 UTC (permalink / raw)
  To: Mark Brown
  Cc: oder_chiou, perex, tiwai, Rob Herring, Liam Girdwood, alsa-devel,
	lkml, cy_huang,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	allen lin

Mark Brown <broonie@kernel.org> 於 2021年10月5日 週二 下午8:29寫道:
>
> On Tue, Oct 05, 2021 at 08:25:43PM +0800, ChiYuan Huang wrote:
> > Mark Brown <broonie@kernel.org> 於 2021年10月5日 週二 下午7:49寫道:
> > > On Tue, Oct 05, 2021 at 09:16:54AM +0800, cy_huang wrote:
>
> > > > +  richtek,use-dvdd-1p8v:
> > > > +    description: Indicate DVDD 1P8V is used, default for 3P3V or 5V design
> > > > +    type: boolean
>
> > > I would expect this to be done through the regulator bindings, they
> > > would allow the driver to query the supply voltage.
>
> > It's more like as the I/O pad voltage.
> > Must be the same as I2C and I2S signal high level.
> > It depends on the application SOC design.
> > From my understanding, not all application SOC I/O voltage uses
> > regulator interface.
>
> It doesn't really matter what the SoC is doing here, you can always add
> regulator support to your device - you'd be requesting the supplies to
> your device, if the SoC doesn't request the supplies that go to it that
> doesn't really make a difference to what your driver does.
>
> Please don't take things off-list unless there is a really strong reason
> to do so.  Sending things to the list ensures that everyone gets a
> chance to read and comment on things.

Sorry, my fault.
I just noticed the mail not reply all. Loop all again.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 2/2] ASoC: rt9120: Add rt9210 audio amplifier support
       [not found]     ` <CADiBU38X6nY1D7NpgW8+61AX6rUU7jngnPagryDKxUAKdtGjAg@mail.gmail.com>
@ 2021-10-05 12:41       ` ChiYuan Huang
       [not found]       ` <YVxIv6NOiVdNSkXf@sirena.org.uk>
  1 sibling, 0 replies; 11+ messages in thread
From: ChiYuan Huang @ 2021-10-05 12:41 UTC (permalink / raw)
  To: Mark Brown
  Cc: oder_chiou, perex, tiwai, Rob Herring, Liam Girdwood, alsa-devel,
	lkml, cy_huang,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	allen lin

ChiYuan Huang <u0084500@gmail.com> 於 2021年10月5日 週二 下午8:36寫道:
>
> Mark Brown <broonie@kernel.org> 於 2021年10月5日 週二 下午7:54寫道:
> >
> > On Tue, Oct 05, 2021 at 09:16:55AM +0800, cy_huang wrote:
> >
> > > +static const char * const sdo_select_text[] = {
> > > +     "NONE", "INTF", "FINAL", "RMS Detect"
> > > +};
> >
> > Why not None and Final?
> >
> Just follow the datasheet to write the text.
> Whatever, Ack in next.
> > > +     if (event == SND_SOC_DAPM_PRE_PMU)
> > > +             snd_soc_component_write(comp, RT9120_REG_ERRRPT, 0);
> > > +     else if (event == SND_SOC_DAPM_POST_PMU)
> > > +             msleep(RT9120_AMPON_WAITMS);
> > > +     else if (event == SND_SOC_DAPM_POST_PMD)
> > > +             msleep(RT9120_AMPOFF_WAITMS);
> >
> > This should be a switch statement, it'd be clearer.
> >
> Ack in next.
> > > +     /* Default config volume to 0dB */
> > > +     snd_soc_component_write(comp, RT9120_REG_MSVOL, 0x180);
> > > +     /* Mute by default */
> > > +     snd_soc_component_update_bits(comp, RT9120_REG_VOLRAMP,
> > > +                                   RT9120_MUTE_MASK, RT9120_MUTE_MASK);
> >
> > As ever you should leave the defaults at whatever the hardware defaults
> > to, the defaults for one machine may not be suitable for another so we
> > shouldn't be trying to do that in software.
> The default volume will be kept in value 0x7ff (mute).
> I just want to follow the ASoC flow to control mute/unmute mask by AMP on/off.
> If to default set volume to 0dB and mute is improper, user have to use
> mixer control to configure the volume.
> Does mute function also need to be removed also?

Sorry, loop all again.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 1/2] ASoC: dt-bindings: rt9120: Add initial bindings
  2021-10-05 12:39       ` ChiYuan Huang
@ 2021-10-06  8:47         ` ChiYuan Huang
  2021-10-07  2:44           ` ChiYuan Huang
  0 siblings, 1 reply; 11+ messages in thread
From: ChiYuan Huang @ 2021-10-06  8:47 UTC (permalink / raw)
  To: Mark Brown
  Cc: oder_chiou, perex, tiwai, Rob Herring, Liam Girdwood, alsa-devel,
	lkml, cy_huang,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	allen lin

Hi, Mark:
ChiYuan Huang <u0084500@gmail.com> 於 2021年10月5日 週二 下午8:39寫道:
>
> Mark Brown <broonie@kernel.org> 於 2021年10月5日 週二 下午8:29寫道:
> >
> > On Tue, Oct 05, 2021 at 08:25:43PM +0800, ChiYuan Huang wrote:
> > > Mark Brown <broonie@kernel.org> 於 2021年10月5日 週二 下午7:49寫道:
> > > > On Tue, Oct 05, 2021 at 09:16:54AM +0800, cy_huang wrote:
> >
> > > > > +  richtek,use-dvdd-1p8v:
> > > > > +    description: Indicate DVDD 1P8V is used, default for 3P3V or 5V design
> > > > > +    type: boolean
> >
> > > > I would expect this to be done through the regulator bindings, they
> > > > would allow the driver to query the supply voltage.
> >
> > > It's more like as the I/O pad voltage.
> > > Must be the same as I2C and I2S signal high level.
> > > It depends on the application SOC design.
> > > From my understanding, not all application SOC I/O voltage uses
> > > regulator interface.
> >
> > It doesn't really matter what the SoC is doing here, you can always add
> > regulator support to your device - you'd be requesting the supplies to
> > your device, if the SoC doesn't request the supplies that go to it that
> > doesn't really make a difference to what your driver does.
> >
> > Please don't take things off-list unless there is a really strong reason
> > to do so.  Sending things to the list ensures that everyone gets a
> > chance to read and comment on things.
>
After contacting our HW RD, to support DVDD 1.8V not just SW config,
also HW connections.
To get only DVDD supply voltage is not enough to meet the HW design.
The property seems indeed and need to be used by user's HW connection.

Can this property to be kept?
> Sorry, my fault.
> I just noticed the mail not reply all. Loop all again.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 2/2] ASoC: rt9120: Add rt9210 audio amplifier support
       [not found]       ` <YVxIv6NOiVdNSkXf@sirena.org.uk>
@ 2021-10-06  9:09         ` ChiYuan Huang
  0 siblings, 0 replies; 11+ messages in thread
From: ChiYuan Huang @ 2021-10-06  9:09 UTC (permalink / raw)
  To: Mark Brown
  Cc: oder_chiou, perex, tiwai, Rob Herring, Liam Girdwood, alsa-devel,
	lkml, cy_huang,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	allen lin

Hi, Mark:

Mark Brown <broonie@kernel.org> 於 2021年10月5日 週二 下午8:44寫道:
>
> On Tue, Oct 05, 2021 at 08:36:44PM +0800, ChiYuan Huang wrote:
> > Mark Brown <broonie@kernel.org> 於 2021年10月5日 週二 下午7:54寫道:
> > > On Tue, Oct 05, 2021 at 09:16:55AM +0800, cy_huang wrote:
>
> > > > +     /* Default config volume to 0dB */
> > > > +     snd_soc_component_write(comp, RT9120_REG_MSVOL, 0x180);
> > > > +     /* Mute by default */
> > > > +     snd_soc_component_update_bits(comp, RT9120_REG_VOLRAMP,
> > > > +                                   RT9120_MUTE_MASK, RT9120_MUTE_MASK);
>
> > > As ever you should leave the defaults at whatever the hardware defaults
> > > to, the defaults for one machine may not be suitable for another so we
> > > shouldn't be trying to do that in software.
>
> > The default volume will be kept in value 0x7ff (mute).
> > I just want to follow the ASoC flow to control mute/unmute mask by AMP on/off.
> > If to default set volume to 0dB and mute is improper, user have to use
> > mixer control to configure the volume.
> > Does mute function also need to be removed also?
>
> It's totally fine and indeed quite common for devices to be muted by
> default - usually systems will have UCM profiles that unmute things by
> the time users actually interact with them.
>
> Please don't take things off-list unless there is a really strong reason
> to do so.  Sending things to the list ensures that everyone gets a
> chance to read and comment on things.

After asking the HW member, there's already builtin HW volume ramp function.
Mute API is still no need. There's already no pop issue without mute function.

So the next change, I'll remove the default volume and mute config,
and also mute API.

Thx.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 1/2] ASoC: dt-bindings: rt9120: Add initial bindings
  2021-10-06  8:47         ` ChiYuan Huang
@ 2021-10-07  2:44           ` ChiYuan Huang
  2021-10-07 13:45             ` Mark Brown
  0 siblings, 1 reply; 11+ messages in thread
From: ChiYuan Huang @ 2021-10-07  2:44 UTC (permalink / raw)
  To: Mark Brown
  Cc: oder_chiou, perex, tiwai, Rob Herring, Liam Girdwood, alsa-devel,
	lkml, cy_huang,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	allen lin

Hi,

ChiYuan Huang <u0084500@gmail.com> 於 2021年10月6日 週三 下午4:47寫道:
>
> Hi, Mark:
> ChiYuan Huang <u0084500@gmail.com> 於 2021年10月5日 週二 下午8:39寫道:
> >
> > Mark Brown <broonie@kernel.org> 於 2021年10月5日 週二 下午8:29寫道:
> > >
> > > On Tue, Oct 05, 2021 at 08:25:43PM +0800, ChiYuan Huang wrote:
> > > > Mark Brown <broonie@kernel.org> 於 2021年10月5日 週二 下午7:49寫道:
> > > > > On Tue, Oct 05, 2021 at 09:16:54AM +0800, cy_huang wrote:
> > >
> > > > > > +  richtek,use-dvdd-1p8v:
> > > > > > +    description: Indicate DVDD 1P8V is used, default for 3P3V or 5V design
> > > > > > +    type: boolean
> > >
> > > > > I would expect this to be done through the regulator bindings, they
> > > > > would allow the driver to query the supply voltage.
> > >
> > > > It's more like as the I/O pad voltage.
> > > > Must be the same as I2C and I2S signal high level.
> > > > It depends on the application SOC design.
> > > > From my understanding, not all application SOC I/O voltage uses
> > > > regulator interface.
> > >
> > > It doesn't really matter what the SoC is doing here, you can always add
> > > regulator support to your device - you'd be requesting the supplies to
> > > your device, if the SoC doesn't request the supplies that go to it that
> > > doesn't really make a difference to what your driver does.
> > >
> > > Please don't take things off-list unless there is a really strong reason
> > > to do so.  Sending things to the list ensures that everyone gets a
> > > chance to read and comment on things.
> >
> After contacting our HW RD, to support DVDD 1.8V not just SW config,
> also HW connections.
> To get only DVDD supply voltage is not enough to meet the HW design.
> The property seems indeed and need to be used by user's HW connection.
>
> Can this property to be kept?

After thinking, This property name may be improper.
I think this change depends on HW external circuit for lowv application.
Currently, I'm modifying the V3 change, this property name also affect
the property parsing code change.
May I directly change the name to 'richtek,dvdd-lowv-application' and
submit the patch v3?

Any comment is appreciated.
> > Sorry, my fault.
> > I just noticed the mail not reply all. Loop all again.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 1/2] ASoC: dt-bindings: rt9120: Add initial bindings
  2021-10-07  2:44           ` ChiYuan Huang
@ 2021-10-07 13:45             ` Mark Brown
  2021-10-08  0:25               ` ChiYuan Huang
  0 siblings, 1 reply; 11+ messages in thread
From: Mark Brown @ 2021-10-07 13:45 UTC (permalink / raw)
  To: ChiYuan Huang
  Cc: oder_chiou, perex, tiwai, Rob Herring, Liam Girdwood, alsa-devel,
	lkml, cy_huang,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	allen lin

[-- Attachment #1: Type: text/plain, Size: 1485 bytes --]

On Thu, Oct 07, 2021 at 10:44:49AM +0800, ChiYuan Huang wrote:
> ChiYuan Huang <u0084500@gmail.com> 於 2021年10月6日 週三 下午4:47寫道:
> > ChiYuan Huang <u0084500@gmail.com> 於 2021年10月5日 週二 下午8:39寫道:
> > > Mark Brown <broonie@kernel.org> 於 2021年10月5日 週二 下午8:29寫道:

> > > > > > I would expect this to be done through the regulator bindings, they
> > > > > > would allow the driver to query the supply voltage.

> > > > Please don't take things off-list unless there is a really strong reason
> > > > to do so.  Sending things to the list ensures that everyone gets a
> > > > chance to read and comment on things.

> > After contacting our HW RD, to support DVDD 1.8V not just SW config,
> > also HW connections.
> > To get only DVDD supply voltage is not enough to meet the HW design.
> > The property seems indeed and need to be used by user's HW connection.

> > Can this property to be kept?

> After thinking, This property name may be improper.
> I think this change depends on HW external circuit for lowv application.
> Currently, I'm modifying the V3 change, this property name also affect
> the property parsing code change.
> May I directly change the name to 'richtek,dvdd-lowv-application' and
> submit the patch v3?

I still don't understand why you wouldn't describe this through the
regulator bindings, those exist to describe the physical supplies ont he
board and their constraints.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 1/2] ASoC: dt-bindings: rt9120: Add initial bindings
  2021-10-07 13:45             ` Mark Brown
@ 2021-10-08  0:25               ` ChiYuan Huang
  0 siblings, 0 replies; 11+ messages in thread
From: ChiYuan Huang @ 2021-10-08  0:25 UTC (permalink / raw)
  To: Mark Brown
  Cc: oder_chiou, perex, tiwai, Rob Herring, Liam Girdwood, alsa-devel,
	lkml, cy_huang,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	allen lin

Mark Brown <broonie@kernel.org> 於 2021年10月7日 週四 下午9:45寫道:
>
> On Thu, Oct 07, 2021 at 10:44:49AM +0800, ChiYuan Huang wrote:
> > ChiYuan Huang <u0084500@gmail.com> 於 2021年10月6日 週三 下午4:47寫道:
> > > ChiYuan Huang <u0084500@gmail.com> 於 2021年10月5日 週二 下午8:39寫道:
> > > > Mark Brown <broonie@kernel.org> 於 2021年10月5日 週二 下午8:29寫道:
>
> > > > > > > I would expect this to be done through the regulator bindings, they
> > > > > > > would allow the driver to query the supply voltage.
>
> > > > > Please don't take things off-list unless there is a really strong reason
> > > > > to do so.  Sending things to the list ensures that everyone gets a
> > > > > chance to read and comment on things.
>
> > > After contacting our HW RD, to support DVDD 1.8V not just SW config,
> > > also HW connections.
> > > To get only DVDD supply voltage is not enough to meet the HW design.
> > > The property seems indeed and need to be used by user's HW connection.
>
> > > Can this property to be kept?
>
> > After thinking, This property name may be improper.
> > I think this change depends on HW external circuit for lowv application.
> > Currently, I'm modifying the V3 change, this property name also affect
> > the property parsing code change.
> > May I directly change the name to 'richtek,dvdd-lowv-application' and
> > submit the patch v3?
>
> I still don't understand why you wouldn't describe this through the
> regulator bindings, those exist to describe the physical supplies ont he
> board and their constraints.

Not to oppose your comment, from the initial idea, I'm just thinking
'how' to make the user easy to use.
But if this way  is more flexible, I'll change it to check the
regulator voltage.

This will be put in patch v3.
Thanks.

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2021-10-08  0:25 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-05  1:16 [PATCH 1/2] ASoC: dt-bindings: rt9120: Add initial bindings cy_huang
2021-10-05  1:16 ` [PATCH 2/2] ASoC: rt9120: Add rt9210 audio amplifier support cy_huang
2021-10-05 11:54   ` Mark Brown
     [not found]     ` <CADiBU38X6nY1D7NpgW8+61AX6rUU7jngnPagryDKxUAKdtGjAg@mail.gmail.com>
2021-10-05 12:41       ` ChiYuan Huang
     [not found]       ` <YVxIv6NOiVdNSkXf@sirena.org.uk>
2021-10-06  9:09         ` ChiYuan Huang
2021-10-05 11:49 ` [PATCH 1/2] ASoC: dt-bindings: rt9120: Add initial bindings Mark Brown
     [not found]   ` <CADiBU39dvKS_a5FDgw9yMVFe8Uycn6bfjGwBWq+7MN_DdxkL1g@mail.gmail.com>
     [not found]     ` <YVxFMaPhZdAFniMa@sirena.org.uk>
2021-10-05 12:39       ` ChiYuan Huang
2021-10-06  8:47         ` ChiYuan Huang
2021-10-07  2:44           ` ChiYuan Huang
2021-10-07 13:45             ` Mark Brown
2021-10-08  0:25               ` ChiYuan Huang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).