LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH 0/2] Add Vol+ support for sc7280-idp
@ 2021-08-13  4:55 satya priya
  2021-08-13  4:55 ` [PATCH 1/2] pinctrl: qcom: spmi-gpio: correct parent irqspec translation satya priya
  2021-08-13  4:55 ` [PATCH 2/2] arm64: dts: sc7280: Add volume up support for sc7280-idp satya priya
  0 siblings, 2 replies; 10+ messages in thread
From: satya priya @ 2021-08-13  4:55 UTC (permalink / raw)
  To: Linus Walleij, Rob Herring, Andy Gross, Bjorn Andersson
  Cc: David Collins, kgunda, linux-gpio, linux-kernel, devicetree,
	linux-arm-msm, satya priya

David Collins (1):
  pinctrl: qcom: spmi-gpio: correct parent irqspec translation

satya priya (1):
  arm64: dts: sc7280: Add volume up support for sc7280-idp

 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 31 ++++++++++++++++++++++++++
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 37 +++++++++++++++++++++++++++++---
 2 files changed, 65 insertions(+), 3 deletions(-)

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 1/2] pinctrl: qcom: spmi-gpio: correct parent irqspec translation
  2021-08-13  4:55 [PATCH 0/2] Add Vol+ support for sc7280-idp satya priya
@ 2021-08-13  4:55 ` satya priya
  2021-08-13  8:57   ` Linus Walleij
  2021-08-13  4:55 ` [PATCH 2/2] arm64: dts: sc7280: Add volume up support for sc7280-idp satya priya
  1 sibling, 1 reply; 10+ messages in thread
From: satya priya @ 2021-08-13  4:55 UTC (permalink / raw)
  To: Linus Walleij, Rob Herring, Andy Gross, Bjorn Andersson
  Cc: David Collins, kgunda, linux-gpio, linux-kernel, devicetree,
	linux-arm-msm, satya priya

From: David Collins <collinsd@codeaurora.org>

pmic_gpio_child_to_parent_hwirq() and
gpiochip_populate_parent_fwspec_fourcell() translate a pinctrl-
spmi-gpio irqspec to an SPMI controller irqspec.  When they do
this, they use a fixed SPMI slave ID of 0 and a fixed GPIO
peripheral offset of 0xC0 (corresponding to SPMI address 0xC000).
This translation results in an incorrect irqspec for secondary
PMICs that don't have a slave ID of 0 as well as for PMIC chips
which have GPIO peripherals located at a base address other than
0xC000.

Correct this issue by passing the slave ID of the pinctrl-spmi-
gpio device's parent in the SPMI controller irqspec and by
calculating the peripheral ID base from the device tree 'reg'
property of the pinctrl-spmi-gpio device.

Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: satya priya <skakit@codeaurora.org>
---
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 37 +++++++++++++++++++++++++++++---
 1 file changed, 34 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index 98bf0e2..dbae168 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2012-2014, 2016-2021 The Linux Foundation. All rights reserved.
  */
 
 #include <linux/gpio/driver.h>
@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
+#include <linux/spmi.h>
 #include <linux/types.h>
 
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -171,6 +172,8 @@ struct pmic_gpio_state {
 	struct pinctrl_dev *ctrl;
 	struct gpio_chip chip;
 	struct irq_chip irq;
+	u8 usid;
+	u8 pid_base;
 };
 
 static const struct pinconf_generic_params pmic_gpio_bindings[] = {
@@ -949,12 +952,36 @@ static int pmic_gpio_child_to_parent_hwirq(struct gpio_chip *chip,
 					   unsigned int *parent_hwirq,
 					   unsigned int *parent_type)
 {
-	*parent_hwirq = child_hwirq + 0xc0;
+	struct pmic_gpio_state *state = gpiochip_get_data(chip);
+
+	*parent_hwirq = child_hwirq + state->pid_base;
 	*parent_type = child_type;
 
 	return 0;
 }
 
+static void *pmic_gpio_populate_parent_fwspec(struct gpio_chip *chip,
+					     unsigned int parent_hwirq,
+					     unsigned int parent_type)
+{
+	struct pmic_gpio_state *state = gpiochip_get_data(chip);
+	struct irq_fwspec *fwspec;
+
+	fwspec = kzalloc(sizeof(*fwspec), GFP_KERNEL);
+	if (!fwspec)
+		return NULL;
+
+	fwspec->fwnode = chip->irq.parent_domain->fwnode;
+
+	fwspec->param_count = 4;
+	fwspec->param[0] = state->usid;
+	fwspec->param[1] = parent_hwirq;
+	fwspec->param[2] = 0;
+	fwspec->param[3] = parent_type;
+
+	return fwspec;
+}
+
 static int pmic_gpio_probe(struct platform_device *pdev)
 {
 	struct irq_domain *parent_domain;
@@ -965,6 +992,7 @@ static int pmic_gpio_probe(struct platform_device *pdev)
 	struct pmic_gpio_pad *pad, *pads;
 	struct pmic_gpio_state *state;
 	struct gpio_irq_chip *girq;
+	const struct spmi_device *parent_spmi_dev;
 	int ret, npins, i;
 	u32 reg;
 
@@ -984,6 +1012,9 @@ static int pmic_gpio_probe(struct platform_device *pdev)
 
 	state->dev = &pdev->dev;
 	state->map = dev_get_regmap(dev->parent, NULL);
+	parent_spmi_dev = to_spmi_device(dev->parent);
+	state->usid = parent_spmi_dev->usid;
+	state->pid_base = reg >> 8;
 
 	pindesc = devm_kcalloc(dev, npins, sizeof(*pindesc), GFP_KERNEL);
 	if (!pindesc)
@@ -1059,7 +1090,7 @@ static int pmic_gpio_probe(struct platform_device *pdev)
 	girq->fwnode = of_node_to_fwnode(state->dev->of_node);
 	girq->parent_domain = parent_domain;
 	girq->child_to_parent_hwirq = pmic_gpio_child_to_parent_hwirq;
-	girq->populate_parent_alloc_arg = gpiochip_populate_parent_fwspec_fourcell;
+	girq->populate_parent_alloc_arg = pmic_gpio_populate_parent_fwspec;
 	girq->child_offset_to_irq = pmic_gpio_child_offset_to_irq;
 	girq->child_irq_domain_ops.translate = pmic_gpio_domain_translate;
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 2/2] arm64: dts: sc7280: Add volume up support for sc7280-idp
  2021-08-13  4:55 [PATCH 0/2] Add Vol+ support for sc7280-idp satya priya
  2021-08-13  4:55 ` [PATCH 1/2] pinctrl: qcom: spmi-gpio: correct parent irqspec translation satya priya
@ 2021-08-13  4:55 ` satya priya
  1 sibling, 0 replies; 10+ messages in thread
From: satya priya @ 2021-08-13  4:55 UTC (permalink / raw)
  To: Linus Walleij, Rob Herring, Andy Gross, Bjorn Andersson
  Cc: David Collins, kgunda, linux-gpio, linux-kernel, devicetree,
	linux-arm-msm, satya priya

Add pm7325 PMIC gpio support for vol+ on sc7280-idp.

Signed-off-by: satya priya <skakit@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 371a2a9..52bcbbc 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -199,6 +199,37 @@
 	modem-init;
 };
 
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_vol_up_default>;
+
+		vol_up {
+			label = "volume_up";
+			gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			gpio-key,wakeup;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+	};
+};
+
+&pm7325_gpios {
+	key_vol_up_default: key_vol_up_default {
+		pins = "gpio6";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		power-source = <0>;
+		qcom,drive-strength = <3>;
+	};
+};
+
 &pmk8350_vadc {
 	pmk8350_die_temp {
 		reg = <PMK8350_ADC7_DIE_TEMP>;
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 1/2] pinctrl: qcom: spmi-gpio: correct parent irqspec translation
  2021-08-13  4:55 ` [PATCH 1/2] pinctrl: qcom: spmi-gpio: correct parent irqspec translation satya priya
@ 2021-08-13  8:57   ` Linus Walleij
  2021-08-16  6:50     ` skakit
  0 siblings, 1 reply; 10+ messages in thread
From: Linus Walleij @ 2021-08-13  8:57 UTC (permalink / raw)
  To: satya priya
  Cc: Rob Herring, Andy Gross, Bjorn Andersson, David Collins,
	Kiran Gunda, open list:GPIO SUBSYSTEM, linux-kernel,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, MSM

Hi Satya/David,

nice work on identifying this bug!

On Fri, Aug 13, 2021 at 6:56 AM satya priya <skakit@codeaurora.org> wrote:
>
> From: David Collins <collinsd@codeaurora.org>
>
> pmic_gpio_child_to_parent_hwirq() and
> gpiochip_populate_parent_fwspec_fourcell() translate a pinctrl-
> spmi-gpio irqspec to an SPMI controller irqspec.  When they do
> this, they use a fixed SPMI slave ID of 0 and a fixed GPIO
> peripheral offset of 0xC0 (corresponding to SPMI address 0xC000).
> This translation results in an incorrect irqspec for secondary
> PMICs that don't have a slave ID of 0 as well as for PMIC chips
> which have GPIO peripherals located at a base address other than
> 0xC000.
>
> Correct this issue by passing the slave ID of the pinctrl-spmi-
> gpio device's parent in the SPMI controller irqspec and by
> calculating the peripheral ID base from the device tree 'reg'
> property of the pinctrl-spmi-gpio device.
>
> Signed-off-by: David Collins <collinsd@codeaurora.org>
> Signed-off-by: satya priya <skakit@codeaurora.org>

Is this a regression or is it fine if I just apply it for v5.15?
I was thinking v5.15 since it isn't yet used in device trees.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 1/2] pinctrl: qcom: spmi-gpio: correct parent irqspec translation
  2021-08-13  8:57   ` Linus Walleij
@ 2021-08-16  6:50     ` skakit
  2021-08-16 21:08       ` Stephen Boyd
  0 siblings, 1 reply; 10+ messages in thread
From: skakit @ 2021-08-16  6:50 UTC (permalink / raw)
  To: Linus Walleij
  Cc: Rob Herring, Andy Gross, Bjorn Andersson, David Collins,
	Kiran Gunda, open list:GPIO SUBSYSTEM, linux-kernel,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, MSM

Hi Linus,

On 2021-08-13 14:27, Linus Walleij wrote:
> Hi Satya/David,
> 
> nice work on identifying this bug!
> 
> On Fri, Aug 13, 2021 at 6:56 AM satya priya <skakit@codeaurora.org> 
> wrote:
>> 
>> From: David Collins <collinsd@codeaurora.org>
>> 
>> pmic_gpio_child_to_parent_hwirq() and
>> gpiochip_populate_parent_fwspec_fourcell() translate a pinctrl-
>> spmi-gpio irqspec to an SPMI controller irqspec.  When they do
>> this, they use a fixed SPMI slave ID of 0 and a fixed GPIO
>> peripheral offset of 0xC0 (corresponding to SPMI address 0xC000).
>> This translation results in an incorrect irqspec for secondary
>> PMICs that don't have a slave ID of 0 as well as for PMIC chips
>> which have GPIO peripherals located at a base address other than
>> 0xC000.
>> 
>> Correct this issue by passing the slave ID of the pinctrl-spmi-
>> gpio device's parent in the SPMI controller irqspec and by
>> calculating the peripheral ID base from the device tree 'reg'
>> property of the pinctrl-spmi-gpio device.
>> 
>> Signed-off-by: David Collins <collinsd@codeaurora.org>
>> Signed-off-by: satya priya <skakit@codeaurora.org>
> 
> Is this a regression or is it fine if I just apply it for v5.15?
> I was thinking v5.15 since it isn't yet used in device trees.
> 

Without this fix, [2/2] Vol+ support is failing. If possible please 
merge it on current branch.

> Yours,
> Linus Walleij

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 1/2] pinctrl: qcom: spmi-gpio: correct parent irqspec translation
  2021-08-16  6:50     ` skakit
@ 2021-08-16 21:08       ` Stephen Boyd
  2021-08-17  9:06         ` skakit
  0 siblings, 1 reply; 10+ messages in thread
From: Stephen Boyd @ 2021-08-16 21:08 UTC (permalink / raw)
  To: Linus Walleij, skakit
  Cc: Rob Herring, Andy Gross, Bjorn Andersson, David Collins,
	Kiran Gunda, linux-gpio, linux-kernel, devicetree, linux-arm-msm

Quoting skakit@codeaurora.org (2021-08-15 23:50:37)
> Hi Linus,
>
> On 2021-08-13 14:27, Linus Walleij wrote:
> > Hi Satya/David,
> >
> > nice work on identifying this bug!
> >
> > On Fri, Aug 13, 2021 at 6:56 AM satya priya <skakit@codeaurora.org>
> > wrote:
> >>
> >> From: David Collins <collinsd@codeaurora.org>
> >>
> >> pmic_gpio_child_to_parent_hwirq() and
> >> gpiochip_populate_parent_fwspec_fourcell() translate a pinctrl-
> >> spmi-gpio irqspec to an SPMI controller irqspec.  When they do
> >> this, they use a fixed SPMI slave ID of 0 and a fixed GPIO
> >> peripheral offset of 0xC0 (corresponding to SPMI address 0xC000).
> >> This translation results in an incorrect irqspec for secondary
> >> PMICs that don't have a slave ID of 0 as well as for PMIC chips
> >> which have GPIO peripherals located at a base address other than
> >> 0xC000.
> >>
> >> Correct this issue by passing the slave ID of the pinctrl-spmi-
> >> gpio device's parent in the SPMI controller irqspec and by
> >> calculating the peripheral ID base from the device tree 'reg'
> >> property of the pinctrl-spmi-gpio device.
> >>
> >> Signed-off-by: David Collins <collinsd@codeaurora.org>
> >> Signed-off-by: satya priya <skakit@codeaurora.org>

Can you please add an appropriate Fixes tag?

> >
> > Is this a regression or is it fine if I just apply it for v5.15?
> > I was thinking v5.15 since it isn't yet used in device trees.
> >
>
> Without this fix, [2/2] Vol+ support is failing. If possible please
> merge it on current branch.
>

Are there any boards supported upstream that have a gpio block that
isn't at 0xc000?

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 1/2] pinctrl: qcom: spmi-gpio: correct parent irqspec translation
  2021-08-16 21:08       ` Stephen Boyd
@ 2021-08-17  9:06         ` skakit
  2021-08-17 19:15           ` Stephen Boyd
  0 siblings, 1 reply; 10+ messages in thread
From: skakit @ 2021-08-17  9:06 UTC (permalink / raw)
  To: Stephen Boyd
  Cc: Linus Walleij, Rob Herring, Andy Gross, Bjorn Andersson,
	David Collins, Kiran Gunda, linux-gpio, linux-kernel, devicetree,
	linux-arm-msm

On 2021-08-17 02:38, Stephen Boyd wrote:
> Quoting skakit@codeaurora.org (2021-08-15 23:50:37)
>> Hi Linus,
>> 
>> On 2021-08-13 14:27, Linus Walleij wrote:
>> > Hi Satya/David,
>> >
>> > nice work on identifying this bug!
>> >
>> > On Fri, Aug 13, 2021 at 6:56 AM satya priya <skakit@codeaurora.org>
>> > wrote:
>> >>
>> >> From: David Collins <collinsd@codeaurora.org>
>> >>
>> >> pmic_gpio_child_to_parent_hwirq() and
>> >> gpiochip_populate_parent_fwspec_fourcell() translate a pinctrl-
>> >> spmi-gpio irqspec to an SPMI controller irqspec.  When they do
>> >> this, they use a fixed SPMI slave ID of 0 and a fixed GPIO
>> >> peripheral offset of 0xC0 (corresponding to SPMI address 0xC000).
>> >> This translation results in an incorrect irqspec for secondary
>> >> PMICs that don't have a slave ID of 0 as well as for PMIC chips
>> >> which have GPIO peripherals located at a base address other than
>> >> 0xC000.
>> >>
>> >> Correct this issue by passing the slave ID of the pinctrl-spmi-
>> >> gpio device's parent in the SPMI controller irqspec and by
>> >> calculating the peripheral ID base from the device tree 'reg'
>> >> property of the pinctrl-spmi-gpio device.
>> >>
>> >> Signed-off-by: David Collins <collinsd@codeaurora.org>
>> >> Signed-off-by: satya priya <skakit@codeaurora.org>
> 
> Can you please add an appropriate Fixes tag?
> 

Okay.

>> >
>> > Is this a regression or is it fine if I just apply it for v5.15?
>> > I was thinking v5.15 since it isn't yet used in device trees.
>> >
>> 
>> Without this fix, [2/2] Vol+ support is failing. If possible please
>> merge it on current branch.
>> 
> 
> Are there any boards supported upstream that have a gpio block that
> isn't at 0xc000?

yes, all the pmics used in sm8350-mtp.dts board have gpio block at 
addresses different than 0xc000.

Thanks,
Satya Priya

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 1/2] pinctrl: qcom: spmi-gpio: correct parent irqspec translation
  2021-08-17  9:06         ` skakit
@ 2021-08-17 19:15           ` Stephen Boyd
  2021-08-18  5:26             ` skakit
  0 siblings, 1 reply; 10+ messages in thread
From: Stephen Boyd @ 2021-08-17 19:15 UTC (permalink / raw)
  To: skakit
  Cc: Linus Walleij, Rob Herring, Andy Gross, Bjorn Andersson,
	David Collins, Kiran Gunda, linux-gpio, linux-kernel, devicetree,
	linux-arm-msm

Quoting skakit@codeaurora.org (2021-08-17 02:06:42)
> On 2021-08-17 02:38, Stephen Boyd wrote:
> >
> > Are there any boards supported upstream that have a gpio block that
> > isn't at 0xc000?
>
> yes, all the pmics used in sm8350-mtp.dts board have gpio block at
> addresses different than 0xc000.
>

So maybe

Fixes: f67cc6a91d88 ("arm64: dts: qcom: sm8350-mtp: Add PMICs")

is appropriate then?

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 1/2] pinctrl: qcom: spmi-gpio: correct parent irqspec translation
  2021-08-17 19:15           ` Stephen Boyd
@ 2021-08-18  5:26             ` skakit
  2021-09-02  3:37               ` Stephen Boyd
  0 siblings, 1 reply; 10+ messages in thread
From: skakit @ 2021-08-18  5:26 UTC (permalink / raw)
  To: Stephen Boyd
  Cc: Linus Walleij, Rob Herring, Andy Gross, Bjorn Andersson,
	David Collins, Kiran Gunda, linux-gpio, linux-kernel, devicetree,
	linux-arm-msm

On 2021-08-18 00:45, Stephen Boyd wrote:
> Quoting skakit@codeaurora.org (2021-08-17 02:06:42)
>> On 2021-08-17 02:38, Stephen Boyd wrote:
>> >
>> > Are there any boards supported upstream that have a gpio block that
>> > isn't at 0xc000?
>> 
>> yes, all the pmics used in sm8350-mtp.dts board have gpio block at
>> addresses different than 0xc000.
>> 
> 
> So maybe
> 
> Fixes: f67cc6a91d88 ("arm64: dts: qcom: sm8350-mtp: Add PMICs")
> 
> is appropriate then?

This patch is actually fixing the pinctrl-spmi-gpio.c driver.
So, I think we should add

Fixes: ca69e2d165eb ("qcom: spmi-gpio: add support for hierarchical IRQ 
chip")

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 1/2] pinctrl: qcom: spmi-gpio: correct parent irqspec translation
  2021-08-18  5:26             ` skakit
@ 2021-09-02  3:37               ` Stephen Boyd
  0 siblings, 0 replies; 10+ messages in thread
From: Stephen Boyd @ 2021-09-02  3:37 UTC (permalink / raw)
  To: skakit
  Cc: Linus Walleij, Rob Herring, Andy Gross, Bjorn Andersson,
	David Collins, Kiran Gunda, linux-gpio, linux-kernel, devicetree,
	linux-arm-msm

Quoting skakit@codeaurora.org (2021-08-17 22:26:18)
> On 2021-08-18 00:45, Stephen Boyd wrote:
> > Quoting skakit@codeaurora.org (2021-08-17 02:06:42)
> >> On 2021-08-17 02:38, Stephen Boyd wrote:
> >> >
> >> > Are there any boards supported upstream that have a gpio block that
> >> > isn't at 0xc000?
> >>
> >> yes, all the pmics used in sm8350-mtp.dts board have gpio block at
> >> addresses different than 0xc000.
> >>
> >
> > So maybe
> >
> > Fixes: f67cc6a91d88 ("arm64: dts: qcom: sm8350-mtp: Add PMICs")
> >
> > is appropriate then?
>
> This patch is actually fixing the pinctrl-spmi-gpio.c driver.
> So, I think we should add
>
> Fixes: ca69e2d165eb ("qcom: spmi-gpio: add support for hierarchical IRQ
> chip")

OK. Were you going to resend this patch? I don't see it in linux-next so
I worry that Linus dropped it while the Fixes tag was figured out.

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2021-09-02  3:37 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-13  4:55 [PATCH 0/2] Add Vol+ support for sc7280-idp satya priya
2021-08-13  4:55 ` [PATCH 1/2] pinctrl: qcom: spmi-gpio: correct parent irqspec translation satya priya
2021-08-13  8:57   ` Linus Walleij
2021-08-16  6:50     ` skakit
2021-08-16 21:08       ` Stephen Boyd
2021-08-17  9:06         ` skakit
2021-08-17 19:15           ` Stephen Boyd
2021-08-18  5:26             ` skakit
2021-09-02  3:37               ` Stephen Boyd
2021-08-13  4:55 ` [PATCH 2/2] arm64: dts: sc7280: Add volume up support for sc7280-idp satya priya

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).