LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Octavian Purdila <octavian.purdila@intel.com>
To: Johan Hovold <johan@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>,
	"linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
	lkml <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] mfd: dln2: add suspend/resume functionality
Date: Fri, 5 Dec 2014 15:05:45 +0200	[thread overview]
Message-ID: <CAE1zotKGAvd9oKz5_McihnPcpH-n4Rc4s0r=jm2wb26-dD8Dsg@mail.gmail.com> (raw)
In-Reply-To: <20141205120610.GG11445@localhost>

On Fri, Dec 5, 2014 at 2:06 PM, Johan Hovold <johan@kernel.org> wrote:
> On Fri, Dec 05, 2014 at 01:51:17PM +0200, Octavian Purdila wrote:
>> On Fri, Dec 5, 2014 at 12:17 PM, Johan Hovold <johan@kernel.org> wrote:
>> > On Thu, Nov 27, 2014 at 01:57:14PM +0200, Octavian Purdila wrote:
>> >
>> >> @@ -753,11 +759,42 @@ static const struct usb_device_id dln2_table[] = {
>> >>
>> >>  MODULE_DEVICE_TABLE(usb, dln2_table);
>> >
>> > Place the new callbacks above the device id table.
>> >
>> >> +static int dln2_suspend(struct usb_interface *iface, pm_message_t message)
>> >> +{
>> >> +     struct dln2_dev *dln2 = usb_get_intfdata(iface);
>> >> +
>> >> +     dln2_stop(dln2);
>> >
>> > You should also stop the reads urbs here.
>>
>> Do you mean usb_kill_urb()? I thought that was not necessary unless
>> the device is reset. However, going throught
>> Documentation/usb/power-management.txt again looks like it must be
>> done in suspend.
>
> Yes, you should kill them explicitly. Any outstanding urbs will be
> killed by usb core if you fail to do this.
>
>> >> +     return 0;
>> >> +}
>> >> +
>> >> +static int dln2_resume(struct usb_interface *iface)
>> >> +{
>> >> +     struct dln2_dev *dln2 = usb_get_intfdata(iface);
>> >> +
>> >> +     dln2->disconnect = false;
>> >
>> > And surely you need to resubmit the read urbs in resume, or you will
>> > never receive any more data.
>> >
>> > How did you test this patch?
>> >
>>
>> The resume cb is not called in my setup (kvm), only reset_resume.
>
> Please make sure to test your patches on proper hardware.

It was tested with the proper hardware, I was just testing it in the
setup we use, which is kvm with USB pass through.

>
>> But I assume since the port is not reset when resume is called the
>> URBs are still queued.
>
> No, they will have been killed by usb core even if you forget to do it,
> so this would prevent any further reads.
>
>> >> +     return 0;
>> >> +}
>> >> +
>> >> +static int dln2_reset_resume(struct usb_interface *iface)
>> >> +{
>> >> +     struct dln2_dev *dln2 = usb_get_intfdata(iface);
>> >> +     int ret;
>> >> +
>> >> +     dln2_free_rx_urbs(dln2);
>> >> +     ret = dln2_setup_rx_urbs(dln2, iface->cur_altsetting);
>> >
>> > This doesn't make much sense. Why would you ever want to reallocate the
>> > urbs and their buffers here?
>> >
>> > If the device does not lose its state as you claim, then all you need to
>> > do is to resubmit the read urbs (as in resume).
>> >
>> The device itself does not lose state as it does not lose power and
>> does not react to USB port reset AFAICS (e.g. GPIO settings are
>> preserved). However the USB port is reset and I assumed I must
>> reallocate the URBs.
>
> You don't and should not.
>
>> I just found out that usb-serial uses usb_poisoin_urb and
>> usb_unpoison_urb for suspend/resume and this two looks like just what
>> I need.
>
> Why do you think so?
>

Hmm, never mind, now I understand that usb_poisoin_urb is just used
defensive in usb-serial to prevent the drivers to submit the URB until
resume time.

Thanks for the review Johan, I will send v2 with usb_kill_urb in
suspend() and usb_submit_urb() in resume and resume_reset.

  reply	other threads:[~2014-12-05 13:05 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-27 11:57 Octavian Purdila
2014-12-05 10:17 ` Johan Hovold
2014-12-05 11:51   ` Octavian Purdila
2014-12-05 12:06     ` Johan Hovold
2014-12-05 13:05       ` Octavian Purdila [this message]
2014-12-08 10:57         ` Johan Hovold
2014-12-08 16:14           ` Octavian Purdila

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAE1zotKGAvd9oKz5_McihnPcpH-n4Rc4s0r=jm2wb26-dD8Dsg@mail.gmail.com' \
    --to=octavian.purdila@intel.com \
    --cc=johan@kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --subject='Re: [PATCH] mfd: dln2: add suspend/resume functionality' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).