LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: ulf.hansson@linaro.org, khilman@baylibre.com,
	baylibre-upstreaming@groups.io, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/3] mmc: meson-gx: add ddr-access-quirk
Date: Tue, 14 May 2019 19:58:00 +0200	[thread overview]
Message-ID: <CAFBinCAMoNDnxoQA9XHKy0Xo9MduxD1CvQXOeLZQ3zZ4ViWm7A@mail.gmail.com> (raw)
In-Reply-To: <20190513091548.16674-3-narmstrong@baylibre.com>

Hi Neil,

On Mon, May 13, 2019 at 11:16 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
[...]
> @@ -1158,15 +1183,27 @@ static int meson_mmc_probe(struct platform_device *pdev)
>          */
>         mmc->caps2 &= ~MMC_CAP2_HS400;
>
> -       /* data bounce buffer */
> -       host->bounce_buf_size = mmc->max_req_size;
> -       host->bounce_buf =
> -               dma_alloc_coherent(host->dev, host->bounce_buf_size,
> -                                  &host->bounce_dma_addr, GFP_KERNEL);
> -       if (host->bounce_buf == NULL) {
> -               dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
> -               ret = -ENOMEM;
> -               goto err_free_irq;
> +       if (host->ddr_access_quirk) {
> +               /*
> +                * The MMC Controller embeds 1,5KiB of internal SRAM
> +                * that can be used to be used as bounce buffer.
> +                * In the case of the G12A SDIO controller, use these
> +                * instead of the DDR memory
> +                */
> +               host->bounce_buf_size = SD_EMMC_SRAM_DATA_BUF_LEN;
> +               host->bounce_buf = host->regs + SD_EMMC_SRAM_DATA_BUF_OFF;
> +               host->bounce_dma_addr = res->start + SD_EMMC_SRAM_DATA_BUF_OFF;
I'm curious: why do you need to set bounce_dma_addr in this case?

> +       } else {
> +               /* data bounce buffer */
> +               host->bounce_buf_size = mmc->max_req_size;
> +               host->bounce_buf =
> +                       dma_alloc_coherent(host->dev, host->bounce_buf_size,
> +                                          &host->bounce_dma_addr, GFP_KERNEL);
> +               if (host->bounce_buf == NULL) {
> +                       dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
> +                       ret = -ENOMEM;
> +                       goto err_free_irq;
> +               }
>         }
>
>         host->descs = dma_alloc_coherent(host->dev, SD_EMMC_DESC_BUF_LEN,
if host->descs cannot be allocated then you need to conditionally skip
dma_free_coherent for the bounce buffer in the goto err_bounce_buf
case a few lines below (just like you did in meson_mmc_remove)


Martin

  parent reply	other threads:[~2019-05-14 17:58 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-13  9:15 [PATCH 0/3] mmc: meson-gx: add ddr-access-quirk support Neil Armstrong
2019-05-13  9:15 ` [PATCH 1/3] dt-bindings: mmc: meson-gx: add ddr-access-quirk property Neil Armstrong
2019-05-14 17:50   ` Martin Blumenstingl
2019-05-15 12:43     ` Neil Armstrong
2019-05-15 11:37   ` Ulf Hansson
2019-05-15 12:43     ` Neil Armstrong
2019-05-13  9:15 ` [PATCH 2/3] mmc: meson-gx: add ddr-access-quirk Neil Armstrong
2019-05-13 17:47   ` Kevin Hilman
2019-05-14 17:58   ` Martin Blumenstingl [this message]
2019-05-15 12:45     ` Neil Armstrong
2019-05-15 21:18       ` Martin Blumenstingl
2019-05-16  9:09         ` Neil Armstrong
2019-05-15 11:34   ` Ulf Hansson
2019-05-15 12:51     ` Neil Armstrong
2019-05-13  9:15 ` [PATCH 3/3] arm64: dts: meson-g12a: add ddr-access-quirk property to SDIO controller Neil Armstrong
2019-05-14 17:51   ` Martin Blumenstingl
2019-05-13  9:58 ` [PATCH 0/3] mmc: meson-gx: add ddr-access-quirk support Jerome Brunet
2019-05-13 11:28   ` Jerome Brunet
2019-05-14  9:14 ` [baylibre-upstreaming] " guillaume La Roque

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAFBinCAMoNDnxoQA9XHKy0Xo9MduxD1CvQXOeLZQ3zZ4ViWm7A@mail.gmail.com \
    --to=martin.blumenstingl@googlemail.com \
    --cc=baylibre-upstreaming@groups.io \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=narmstrong@baylibre.com \
    --cc=ulf.hansson@linaro.org \
    --subject='Re: [PATCH 2/3] mmc: meson-gx: add ddr-access-quirk' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).