LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: khilman@baylibre.com, linux-amlogic@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 3/3] arm64: dts: meson: Add minimal support for Odroid-N2
Date: Wed, 29 May 2019 20:13:22 +0200	[thread overview]
Message-ID: <CAFBinCBjBRXMsvwiN0Hi4RHZ1VpU=2T3KnoN800N7FSy3_uBNQ@mail.gmail.com> (raw)
In-Reply-To: <7da1c182-db68-c813-1f3c-b936137deeb2@baylibre.com>

Hi Neil,

On Wed, May 29, 2019 at 12:09 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> On 27/05/2019 16:02, Neil Armstrong wrote:
> > This patch adds basic support for :
> > - Amlogic G12B, which is very similar to G12A
> > - The HardKernel Odroid-N2 based on the S922X SoC
> >
> > The Amlogic G12B SoC is very similar with the G12A SoC, sharing
> > most of the features and architecture, but with these differences :
> > - The first CPU cluster only has 2xCortex-A53 instead of 4
> > - G12B has a second cluster of 4xCortex-A73
> > - Both cluster can achieve 2GHz instead of 1,8GHz for G12A
> > - CPU Clock architecture is difference, thus needing a different
> >   compatible to handle this slight difference
> > - Supports a MIPI CSI input
> > - Embeds a Mali-G52 instead of a Mali-G31, but integration is the same
> >
> > Actual support is done in the same way as for the GXM support, including
> > the G12A dtsi and redefining the CPU clusters.
> > Unlike GXM, the first cluster is different, thus needing to remove
> > the last 2 cpu nodes of the first cluster.
> >
> > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> > ---
> >  arch/arm64/boot/dts/amlogic/Makefile          |   1 +
> >  .../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 288 ++++++++++++++++++
> >  arch/arm64/boot/dts/amlogic/meson-g12b.dtsi   |  82 +++++
> >  3 files changed, 371 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> >  create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> > index e129c03ced14..07b861fe5fa5 100644
> > --- a/arch/arm64/boot/dts/amlogic/Makefile
> > +++ b/arch/arm64/boot/dts/amlogic/Makefile
> > @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
> >  dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
> >  dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
> >  dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
> > +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
> >  dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
> >  dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
> >  dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> > new file mode 100644
> > index 000000000000..48783ead8dfb
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> > @@ -0,0 +1,288 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (c) 2019 BayLibre, SAS
> > + * Author: Neil Armstrong <narmstrong@baylibre.com>
> > + */
> > +
> > +/dts-v1/;
> > +
>
> [...]
>
> > +
> > +     hub_5v: regulator-hub_5v {
> > +             compatible = "regulator-fixed";
> > +             regulator-name = "HUB_5V";
> > +             regulator-min-microvolt = <5000000>;
> > +             regulator-max-microvolt = <5000000>;
> > +             vin-supply = <&vcc_5v>;
> > +
> > +             /* Connected to the Hub CHIPENABLE, LOW sets low power state */
> > +             gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
> > +             enable-active-high;
> > +     };
> > +
> > +     usb_pwr_en: regulator-usb_pwr_en {
> > +             compatible = "regulator-fixed";
> > +             regulator-name = "USB_PWR_EN";
> > +             regulator-min-microvolt = <5000000>;
> > +             regulator-max-microvolt = <5000000>;
> > +             vin-supply = <&hub_5v>;
> > +
> > +             /* Connected to the microUSB port power enable */
> > +             gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
> > +             enable-active-high;
> > +     };
> > +
>
> [...]
>
> > +
> > +&usb {
> > +     status = "okay";
> > +     vbus-supply = <&usb_pwr_en>;
> > +};
> > +
> > +&usb2_phy0 {
> > +     phy-supply = <&vcc_5v>;
> > +};
> > +
> > +&usb2_phy1 {
> > +     phy-supply = <&vcc_5v>;
> > +};
>
> In fact, I need to fixup here :
>
> usb2_phy1 needs &hub_5v and regulator-usb_pwr_en depends on &vcc_5v instead...
sounds fine for me because I don't see a better way for now

> @Martin, can I still keep your reviewed-by for v5 ?
yes, you can keep it

when you re-send it: can you please add a comment to the phy-supply in
usb2_phy1?
I have this in mind: "enable the hub which is connected to this port"
(imho this is a valuable hint together with the "CHIPENABLE" comment
that you already have inside &hub_5v and it helps to make it easier to
understand without having to test it on physical hardware)


Martin

  reply	other threads:[~2019-05-29 18:13 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-27 14:02 [PATCH v4 0/3] arm64: Add initial " Neil Armstrong
2019-05-27 14:02 ` [PATCH v4 1/3] dt-bindings: arm: amlogic: add G12B bindings Neil Armstrong
2019-05-27 14:02 ` [PATCH v4 2/3] dt-bindings: arm: amlogic: add Odroid-N2 binding Neil Armstrong
2019-05-27 14:02 ` [PATCH v4 3/3] arm64: dts: meson: Add minimal support for Odroid-N2 Neil Armstrong
2019-05-27 18:12   ` Martin Blumenstingl
2019-05-29 10:08   ` Neil Armstrong
2019-05-29 18:13     ` Martin Blumenstingl [this message]
2019-05-31  9:21       ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAFBinCBjBRXMsvwiN0Hi4RHZ1VpU=2T3KnoN800N7FSy3_uBNQ@mail.gmail.com' \
    --to=martin.blumenstingl@googlemail.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=narmstrong@baylibre.com \
    --subject='Re: [PATCH v4 3/3] arm64: dts: meson: Add minimal support for Odroid-N2' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).