LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Andrea Zanotti <andreazanottifo@gmail.com>
To: Michael Walle <michael@walle.cc>
Cc: Tudor Ambarus <tudor.ambarus@microchip.com>,
	Pratyush Yadav <p.yadav@ti.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] mtd: spi-nor: micron-st: added support for np8p128ax60
Date: Tue, 31 Aug 2021 12:11:51 +0200	[thread overview]
Message-ID: <CAGiusB0B5dN_K+bW1xudmT6UNmVOL=voBOuSVJeiYo3v6ywO8w@mail.gmail.com> (raw)
In-Reply-To: <CAGiusB1JvHkX7GSvD2JsqKWwC5xBePX_ruWk9nU9gugoroLnKA@mail.gmail.com>

Il giorno mar 31 ago 2021 alle ore 11:09 Andrea Zanotti
<andreazanottifo@gmail.com> ha scritto:
>
> Hi Michael,
>
> Il giorno mar 31 ago 2021 alle ore 10:39 Michael Walle <michael@walle.cc> ha scritto:
>>
>> Hi Andrea,
>>
>> Am 2021-08-31 10:13, schrieb Andrea Zanotti:
>> > From: Andrea Zanotti <andreazanottifo@gmail.com>
>> >
>> > Added support for P8P Parallel Phase Change Memory.
>>
>> Please use present tense, eg "add support..."
>>
>> Is there a public datasheet? If so, please include it above
>> your SoB like so:
>> Datasheet: https://...
>>
>
> I will format the header as per your suggestions. I used the same datasheet
> linked by you at the end of the email
>
>>
>> > Added memory information (page size and sector size) as per data-
>> > sheet information, after typos corrections.
>>
>> After typos corrections?
>>
>
> The one specified in the following paragraph. I'll better write this. (What I meant
> is that there are some typos in the datasheet itself)
>
>>
>> > At page 37, paragraph 'SPI Memory Organization', it is written
>> > down that the memory is organized as:
>> >  * 16.772.216 bytes (typo here, there 16.777.216 bytes)
>> >  * 128 sectors of 128 Kbytes each (correct)
>> >  * 131.072 pages of 64 bytes each (typo here, as the total would be
>> >    64Mbit, but the total memory is actually 128Mbit, correct value
>> >    is 262.144 pages)
>> >
>> > Patch tested against the aforementioned PCM memory.
>>
>> What SPI host controller was used?
>>
>
> I used an AT91SAM9G20 processor, SPI controller "atmel,at91rm9200-spi" (spi-atmel.c)
>
>>
>> > No known regressions inserted, as the patch only adds the possibility
>> > to recognize said PCM memory inside the common spi-nor driver.
>>
>> Please drop this. If there were any regressions, the patch wouldn't
>> be picked up anyway.
>>
>
> It will be dropped.
>
>> >
>> > Signed-off-by: Andrea Zanotti <andreazanottifo@gmail.com>
>> > ---
>> >  drivers/mtd/spi-nor/micron-st.c | 1 +
>> >  1 file changed, 1 insertion(+)
>> >
>> > diff --git a/drivers/mtd/spi-nor/micron-st.c
>> > b/drivers/mtd/spi-nor/micron-st.c
>> > index c224e59820a1..c78331451082 100644
>> > --- a/drivers/mtd/spi-nor/micron-st.c
>> > +++ b/drivers/mtd/spi-nor/micron-st.c
>> > @@ -128,6 +128,7 @@ static const struct flash_info micron_parts[] = {
>> >       { "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048,
>> >                           SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
>> >                           SPI_NOR_4B_OPCODES) },
>> > +     { "np8p128ax60", {0x89, 0xda, 0x18}, 3, 128 * 1024, 128, 64, 0, 0 },
>>
>> Eh? Please use INFO(). And why isn't this 0x20 for micron.
>>
>
> With INFO() macro I am locked in with .page_size = 256 (I would need 64), or am I missing something?
>
>>
>> I found this datasheet:
>> https://media.digikey.com/pdf/Data%20Sheets/Micron%20Technology%20Inc%20PDFs/NP8P128Ax60E_Rev_K.pdf
>>
>> According to that datasheet, the manuf id is 0x20. And the device id
>> should be either 0x88e1 or 0x8821.
>>
>
> You are right, checking it right now.
>

- As per datasheet, table 10 on page 18, Manufacturer code is 0x89
(column "data" for parameter "Manufacturer Code").
- On the datasheet, I agree with you that the device code is
advertised as either 0x88e1 or 0x8821. I changed the byte array
to something wrong in order to have the debug warning on the JEDEC id
bytes, and this is the log:

spi-nor spi0.0: unrecognized JEDEC id bytes: 89 da 18 00 00 00

Second and third byte are "0xda" and "0x18". I am not an expert in the
spi-nor driver, but from my understanding
(if it's wrong, please correct me) the spi-nor driver tries to match
the the read bytes from the memory with the ones
in the tables. I don't know if the datasheet is wrong also in that
cell of the table, or if I am interpreting the data wrongly.


>>
>> >  };
>> >
>> >  static const struct flash_info st_parts[] = {
>>
>> --
>> -michael

  parent reply	other threads:[~2021-08-31 10:12 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-31  8:13 Andrea Zanotti
2021-08-31  8:39 ` Michael Walle
     [not found]   ` <CAGiusB1JvHkX7GSvD2JsqKWwC5xBePX_ruWk9nU9gugoroLnKA@mail.gmail.com>
2021-08-31 10:11     ` Andrea Zanotti [this message]
2021-08-31 15:05       ` Michael Walle
2021-09-01 11:20         ` Andrea Zanotti
2021-09-03 11:47           ` Michael Walle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAGiusB0B5dN_K+bW1xudmT6UNmVOL=voBOuSVJeiYo3v6ywO8w@mail.gmail.com' \
    --to=andreazanottifo@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=michael@walle.cc \
    --cc=miquel.raynal@bootlin.com \
    --cc=p.yadav@ti.com \
    --cc=richard@nod.at \
    --cc=tudor.ambarus@microchip.com \
    --cc=vigneshr@ti.com \
    --subject='Re: [PATCH] mtd: spi-nor: micron-st: added support for np8p128ax60' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).