LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Paul Moore <paul@paul-moore.com>
To: Richard Guy Briggs <rgb@redhat.com>
Cc: Linux-Audit Mailing List <linux-audit@redhat.com>,
	LKML <linux-kernel@vger.kernel.org>,
	SElinux list <selinux@tycho.nsa.gov>,
	Linux Security Module list
	<linux-security-module@vger.kernel.org>,
	Eric Paris <eparis@redhat.com>, Steve Grubb <sgrubb@redhat.com>
Subject: Re: [PATCH ghak46 V1] audit: normalize MAC_STATUS record
Date: Tue, 17 Apr 2018 17:59:05 -0400	[thread overview]
Message-ID: <CAHC9VhTJN0bR73ZUrPY8=wSHBYdrszQXaxBNUfxweuMDGevgcA@mail.gmail.com> (raw)
In-Reply-To: <CAHC9VhQzt4-f5zYkh18NWcp0HALXNR3iB+jeGOPkxdZZx8SdLQ@mail.gmail.com>

On Wed, Apr 11, 2018 at 5:08 PM, Paul Moore <paul@paul-moore.com> wrote:
> On Mon, Apr 9, 2018 at 7:34 PM, Richard Guy Briggs <rgb@redhat.com> wrote:
>> There were two formats of the audit MAC_STATUS record, one of which was more
>> standard than the other.  One listed enforcing status changes and the
>> other listed enabled status changes with a non-standard label.  In
>> addition, the record was missing information about which LSM was
>> responsible and the operation's completion status.  While this record is
>> only issued on success, the parser expects the res= field to be present.
>>
>> old enforcing/permissive:
>> type=MAC_STATUS msg=audit(1523312831.378:24514): enforcing=0 old_enforcing=1 auid=0 ses=1
>> old enable/disable:
>> type=MAC_STATUS msg=audit(1523312831.378:24514): selinux=0 auid=0 ses=1
>>
>> List both sets of status and old values and add the lsm= field and the
>> res= field.
>>
>> Here is the new format:
>> type=MAC_STATUS msg=audit(1523293828.657:891): enforcing=0 old_enforcing=1 auid=0 ses=1 enabled=1 old-enabled=1 lsm=selinux res=1
>>
>> This record already accompanied a SYSCALL record.
>>
>> See: https://github.com/linux-audit/audit-kernel/issues/46
>> Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
>> ---
>>  security/selinux/selinuxfs.c | 11 +++++++----
>>  1 file changed, 7 insertions(+), 4 deletions(-)
>>
>> diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
>> index 00eed84..00b21b2 100644
>> --- a/security/selinux/selinuxfs.c
>> +++ b/security/selinux/selinuxfs.c
>> @@ -145,10 +145,11 @@ static ssize_t sel_write_enforce(struct file *file, const char __user *buf,
>>                 if (length)
>>                         goto out;
>>                 audit_log(current->audit_context, GFP_KERNEL, AUDIT_MAC_STATUS,
>> -                       "enforcing=%d old_enforcing=%d auid=%u ses=%u",
>> +                       "enforcing=%d old_enforcing=%d auid=%u ses=%u"
>> +                       " enabled=%d old-enabled=%d lsm=selinux res=1",
>>                         new_value, selinux_enforcing,
>>                         from_kuid(&init_user_ns, audit_get_loginuid(current)),
>> -                       audit_get_sessionid(current));
>> +                       audit_get_sessionid(current), selinux_enabled, selinux_enabled);
>
> This looks fine.
>
>>                 selinux_enforcing = new_value;
>>                 if (selinux_enforcing)
>>                         avc_ss_reset(0);
>> @@ -272,9 +273,11 @@ static ssize_t sel_write_disable(struct file *file, const char __user *buf,
>>                 if (length)
>>                         goto out;
>>                 audit_log(current->audit_context, GFP_KERNEL, AUDIT_MAC_STATUS,
>> -                       "selinux=0 auid=%u ses=%u",
>> +                       "enforcing=%d old_enforcing=%d auid=%u ses=%u"
>> +                       " enabled=%d old-enabled=%d lsm=selinux res=1",
>> +                       selinux_enforcing, selinux_enforcing,
>>                         from_kuid(&init_user_ns, audit_get_loginuid(current)),
>> -                       audit_get_sessionid(current));
>> +                       audit_get_sessionid(current), 0, 1);
>
> It needs to be said again that I'm opposed to changes like this:
> inserting new fields, removing fields, or otherwise changing the
> format in ways that aren't strictly the addition of new fields to the
> end of a record is a Bad Thing.  However, there are exceptions (there
> are *always* exceptions), and this seems like a reasonable change that
> shouldn't negatively affect anyone.
>
> I'll merge this once the merge window comes to a close (we are going
> to need to base selinux/next on v4.17-rc1).

Merged into selinux/next, although I should mention that there were
some actual code changes because of the SELinux state consolidation
patches that went into v4.17.  The changes were small but please take
a look and make sure everything still looks okay to you.

>>         }
>>
>>         length = count;
>> --
>> 1.8.3.1

-- 
paul moore
www.paul-moore.com

  reply	other threads:[~2018-04-17 21:59 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-09 23:34 Richard Guy Briggs
2018-04-11 21:08 ` Paul Moore
2018-04-17 21:59   ` Paul Moore [this message]
2018-04-17 22:09     ` Richard Guy Briggs
2018-04-18  1:51       ` Paul Moore
2018-04-16  7:26 ` Ondrej Mosnacek
2018-04-16 14:11   ` Richard Guy Briggs
2018-04-16 14:25     ` Ondrej Mosnacek
2018-04-16 18:07     ` Steve Grubb

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAHC9VhTJN0bR73ZUrPY8=wSHBYdrszQXaxBNUfxweuMDGevgcA@mail.gmail.com' \
    --to=paul@paul-moore.com \
    --cc=eparis@redhat.com \
    --cc=linux-audit@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=rgb@redhat.com \
    --cc=selinux@tycho.nsa.gov \
    --cc=sgrubb@redhat.com \
    --subject='Re: [PATCH ghak46 V1] audit: normalize MAC_STATUS record' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).