LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Muni Sekhar <munisekharrms@gmail.com>
To: vishnu <vardhanraj4143@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>,
	alsa-devel <alsa-devel@alsa-project.org>,
	linux-usb@vger.kernel.org, linux-sound@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	kernelnewbies <kernelnewbies@kernelnewbies.org>
Subject: Re: USB-Audio: Device or resource busy (strace log)
Date: Wed, 11 Aug 2021 18:48:29 +0530	[thread overview]
Message-ID: <CAHhAz+gD-UtvXgsWnWx8yPwMbpY4R-ZJqPg9TNNF+iZrmKxQSA@mail.gmail.com> (raw)
In-Reply-To: <CACk2A5ZcrVTv4AVHdmRDh-xWkx=1BHi6SV8yYqX1Z2DzcDR8hA@mail.gmail.com>

On Wed, Aug 11, 2021 at 6:19 PM vishnu <vardhanraj4143@gmail.com> wrote:
>
> can you paste output of
> arecord -l (list of capture devices).
$ arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: USB [Plantronics .Audio 628 USB], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0


> Which device you are using and os.
> Does this instance is already open by default? like any video playing or something like that?
lsof does not catch it.

>
> Yes you can stop pulse audio and try..
>
> On Wed, Aug 11, 2021 at 6:17 PM Jaroslav Kysela <perex@perex.cz> wrote:
>>
>> On 11. 08. 21 14:36, Muni Sekhar wrote:
>> > Hi All,
>> >
>> > $ cat /proc/asound/cards
>> >  0 [USB            ]: USB-Audio - Plantronics .Audio 628 USB
>> >                       Plantronics Plantronics .Audio 628 USB at
>> > usb-0000:00:14.0-2, full speed
>> >
>> > I am using a Plantronics USB Audio headset.
>> >
>> > $ arecord --device hw:0,0 --channels 2 --format S16_LE --rate 44100Hz x.wav
>> > arecord: main:722: audio open error: Device or resource busy
>> >
>> >
>> > 'arecord' command always fails the first time after system boot in my
>> > system. But subsequent execution of the 'arecord' command runs fine.
>> >
>> >
>> > I've attached the strace log for the "audio open error: Device or
>> > resource busy" failure. Is there any fix available for this issue?
>>
>> You may check which other task blocks the PCM device:
>>
>>   lsof /dev/snd/pcmC0D0c
It does not output any process.
$ lsof /dev/snd/pcmC0D0c

1st run:
----------
$ arecord --device hw:0,0 --channels 2 --format S16_LE --rate 44100Hz x.wav
arecord: main:722: audio open error: Device or resource busy

2nd run:
----------
$ arecord --device hw:0,0 --channels 2 --format S16_LE --rate 44100Hz x.wav
Recording WAVE 'x.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
^CAborted by signal Interrupt...


>>
>> I guess that it will be pulseaudio (device enumeration).
>>
>>                                         Jaroslav
>>
>> --
>> Jaroslav Kysela <perex@perex.cz>
>> Linux Sound Maintainer; ALSA Project; Red Hat, Inc.



-- 
Thanks,
Sekhar

  parent reply	other threads:[~2021-08-11 13:18 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-11 12:36 Muni Sekhar
2021-08-11 12:46 ` Jaroslav Kysela
     [not found]   ` <CACk2A5ZcrVTv4AVHdmRDh-xWkx=1BHi6SV8yYqX1Z2DzcDR8hA@mail.gmail.com>
2021-08-11 13:18     ` Muni Sekhar [this message]
2021-08-13 16:29       ` Muni Sekhar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAHhAz+gD-UtvXgsWnWx8yPwMbpY4R-ZJqPg9TNNF+iZrmKxQSA@mail.gmail.com \
    --to=munisekharrms@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=kernelnewbies@kernelnewbies.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=vardhanraj4143@gmail.com \
    --subject='Re: USB-Audio: Device or resource busy (strace log)' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).