LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Andy Shevchenko <andy.shevchenko@gmail.com>
To: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Stefan Roese <sr@denx.de>,
	"open list:SERIAL DRIVERS" <linux-serial@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Yegor Yefremov <yegorslists@googlemail.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Giulio Benetti <giulio.benetti@micronovasrl.com>
Subject: Re: [PATCH 1/2 v2] serial: mctrl_gpio: Check if GPIO property exisits before requesting it
Date: Fri, 24 May 2019 14:11:04 +0300	[thread overview]
Message-ID: <CAHp75VcMVrYv1MXmmqE9fDXShS=Y8pPdWZ4f1neo=ne88TLZDg@mail.gmail.com> (raw)
In-Reply-To: <20190524102002.GT2781@lahna.fi.intel.com>

On Fri, May 24, 2019 at 1:21 PM Mika Westerberg
<mika.westerberg@linux.intel.com> wrote:
>
> On Fri, May 24, 2019 at 11:48:24AM +0200, Stefan Roese wrote:
> > This patch adds a check for the GPIOs property existence, before the
> > GPIO is requested. This fixes an issue seen when the 8250 mctrl_gpio
> > support is added (2nd patch in this patch series) on x86 platforms using
> > ACPI.
> >
> > Here Mika's comments from 2016-08-09:
> >
> > "
> > I noticed that with v4.8-rc1 serial console of some of our Broxton
> > systems does not work properly anymore. I'm able to see output but input
> > does not work.
> >
> > I bisected it down to commit 4ef03d328769eddbfeca1f1c958fdb181a69c341
> > ("tty/serial/8250: use mctrl_gpio helpers").
> >
> > The reason why it fails is that in ACPI we do not have names for GPIOs
> > (except when _DSD is used) so we use the "idx" to index into _CRS GPIO
> > resources. Now mctrl_gpio_init_noauto() goes through a list of GPIOs
> > calling devm_gpiod_get_index_optional() passing "idx" of 0 for each. The
> > UART device in Broxton has following (simplified) ACPI description:
> >
> >     Device (URT4)
> >     {
> >         ...
> >         Name (_CRS, ResourceTemplate () {
> >             GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
> >                     "\\_SB.GPO0", 0x00, ResourceConsumer)
> >             {
> >                 0x003A
> >             }
> >             GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
> >                     "\\_SB.GPO0", 0x00, ResourceConsumer)
> >             {
> >                 0x003D
> >             }
> >         })
> >
> > In this case it finds the first GPIO (0x003A which happens to be RX pin
> > for that UART), turns it into GPIO which then breaks input for the UART
> > device. This also breaks systems with bluetooth connected to UART (those
> > typically have some GPIOs in their _CRS).
> >
> > Any ideas how to fix this?
> >
> > We cannot just drop the _CRS index lookup fallback because that would
> > break many existing machines out there so maybe we can limit this to
> > only DT enabled machines. Or alternatively probe if the property first
> > exists before trying to acquire the GPIOs (using
> > device_property_present()).
> > "
> >
> > This patch implements the fix suggested by Mika in his statement above.
> >

We have a board where ASL provides _DSD for CTS and RxD pins.
I'm afraid this won't work on it.

Basically we need to understand the use of the GPIOs in UART. In our
case it's an out-of-band wake up source for UART.
Simply requiring GPIOs to be present is not enough.

Perhaps property like 'modem-control-gpio-in-use' (this seems a bad
name, given for sake of example).

> > Signed-off-by: Stefan Roese <sr@denx.de>
> > Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
>
> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>



-- 
With Best Regards,
Andy Shevchenko

  reply	other threads:[~2019-05-24 11:11 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-24  9:48 Stefan Roese
2019-05-24  9:48 ` [PATCH 2/2 v2] tty/serial/8250: use mctrl_gpio helpers Stefan Roese
2019-05-24 10:20 ` [PATCH 1/2 v2] serial: mctrl_gpio: Check if GPIO property exisits before requesting it Mika Westerberg
2019-05-24 11:11   ` Andy Shevchenko [this message]
2019-05-24 11:29     ` Stefan Roese
2019-05-24 12:09       ` Giulio Benetti
2019-05-24 13:46       ` Andy Shevchenko
2019-05-27  7:05         ` Stefan Roese

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAHp75VcMVrYv1MXmmqE9fDXShS=Y8pPdWZ4f1neo=ne88TLZDg@mail.gmail.com' \
    --to=andy.shevchenko@gmail.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=giulio.benetti@micronovasrl.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=sr@denx.de \
    --cc=yegorslists@googlemail.com \
    --subject='Re: [PATCH 1/2 v2] serial: mctrl_gpio: Check if GPIO property exisits before requesting it' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).