LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Andy Shevchenko <andy.shevchenko@gmail.com>
To: Mikko Perttunen <mperttunen@nvidia.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Jassi Brar <jassisinghbrar@gmail.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	Jon Hunter <jonathanh@nvidia.com>,
	araza@nvidia.com, devicetree <devicetree@vger.kernel.org>,
	"open list:SERIAL DRIVERS" <linux-serial@vger.kernel.org>,
	linux-tegra@vger.kernel.org,
	linux-arm Mailing List <linux-arm-kernel@lists.infradead.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 6/8] serial: Add Tegra Combined UART driver
Date: Sun, 13 May 2018 17:16:36 +0300	[thread overview]
Message-ID: <CAHp75VfYF_u2bZ+temGbReEB9K-t3A75aUNYwffyv9-=zEi0Lw@mail.gmail.com> (raw)
In-Reply-To: <20180508114403.14499-7-mperttunen@nvidia.com>

On Tue, May 8, 2018 at 2:44 PM, Mikko Perttunen <mperttunen@nvidia.com> wrote:
> The Tegra Combined UART (TCU) is a mailbox-based mechanism that allows
> multiplexing multiple "virtual UARTs" into a single hardware serial
> port. The TCU is the primary serial port on Tegra194 devices.
>
> Add a TCU driver utilizing the mailbox framework, as the used mailboxes
> are part of Tegra HSP blocks that are already controlled by the Tegra
> HSP mailbox driver.

First question, can it be done utilizing SERDEV framework?

> +static void tegra_tcu_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
> +{

> +       (void)port;
> +       (void)mctrl;

Huh?

> +}

> +static void tegra_tcu_uart_stop_tx(struct uart_port *port)
> +{
> +       (void)port;
> +}

Ditto.

> +               if (written == 3) {
> +                       value |= 3 << 24;
> +                       value |= BIT(26);
> +                       mbox_send_message(tcu->tx, &value);

> +               }

(1)

> +       }
> +
> +       if (written) {
> +               value |= written << 24;
> +               value |= BIT(26);
> +               mbox_send_message(tcu->tx, &value);
> +       }

(2)

These are code duplications.

> +static void tegra_tcu_uart_stop_rx(struct uart_port *port)
> +{
> +       (void)port;
> +}
> +
> +static void tegra_tcu_uart_break_ctl(struct uart_port *port, int ctl)
> +{
> +       (void)port;
> +       (void)ctl;
> +}
> +
> +static int tegra_tcu_uart_startup(struct uart_port *port)
> +{
> +       (void)port;
> +
> +       return 0;
> +}
> +
> +static void tegra_tcu_uart_shutdown(struct uart_port *port)
> +{
> +       (void)port;
> +}
> +
> +static void tegra_tcu_uart_set_termios(struct uart_port *port,
> +                                      struct ktermios *new,
> +                                      struct ktermios *old)
> +{
> +       (void)port;
> +       (void)new;
> +       (void)old;
> +}

Remove those unused stub contents.

> +       return uart_set_options(&tegra_tcu_uart_port, cons,
> +                               115200, 'n', 8, 'n');

Can't it be one line?

> +static void tegra_tcu_receive(struct mbox_client *client, void *msg_p)
> +{
> +       struct tty_port *port = &tegra_tcu_uart_port.state->port;

> +       uint32_t msg = *(uint32_t *)msg_p;

Redundant casting.

> +       unsigned int num_bytes;
> +       int i;
> +

> +       num_bytes = (msg >> 24) & 0x3;

Two magic numbers.

> +       for (i = 0; i < num_bytes; i++)
> +               tty_insert_flip_char(port, (msg >> (i*8)) & 0xff, TTY_NORMAL);
> +
> +       tty_flip_buffer_push(port);
> +}

> +MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("NVIDIA Tegra Combined UART driver");
> diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
> index dce5f9dae121..eaf3c303cba6 100644
> --- a/include/uapi/linux/serial_core.h
> +++ b/include/uapi/linux/serial_core.h
> @@ -281,4 +281,7 @@
>  /* MediaTek BTIF */
>  #define PORT_MTK_BTIF  117
>
> +/* NVIDIA Tegra Combined UART */
> +#define PORT_TEGRA_TCU 118

Check if there is an unused gap. IIRC we still have one near to 40ish.

-- 
With Best Regards,
Andy Shevchenko

  reply	other threads:[~2018-05-13 14:16 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-08 11:43 [PATCH 0/8] " Mikko Perttunen
2018-05-08 11:43 ` [PATCH 1/8] dt-bindings: tegra186-hsp: Add shared interrupts Mikko Perttunen
2018-05-22 15:15   ` Jon Hunter
2018-06-19 12:41     ` Mikko Perttunen
2018-05-08 11:43 ` [PATCH 2/8] dt-bindings: serial: Add bindings for nvidia,tegra194-tcu Mikko Perttunen
2018-05-22 15:15   ` Jon Hunter
2018-05-22 20:18     ` Rob Herring
2018-05-22 20:20   ` Rob Herring
2018-05-08 11:43 ` [PATCH 3/8] mailbox: Add transmit done by blocking option Mikko Perttunen
2018-05-08 11:43 ` [PATCH 4/8] mailbox: tegra-hsp: Refactor in preparation of mailboxes Mikko Perttunen
2018-05-22 15:36   ` Jon Hunter
2018-06-19 12:52     ` Mikko Perttunen
2018-05-08 11:44 ` [PATCH 5/8] mailbox: tegra-hsp: Add support for shared mailboxes Mikko Perttunen
2018-05-22 16:20   ` Jon Hunter
2018-05-08 11:44 ` [PATCH 6/8] serial: Add Tegra Combined UART driver Mikko Perttunen
2018-05-13 14:16   ` Andy Shevchenko [this message]
2018-05-13 18:04     ` Mikko Perttunen
2018-05-13 22:20       ` Andy Shevchenko
2018-05-14  7:36         ` Mikko Perttunen
2018-05-13 15:36   ` Jassi Brar
2018-05-13 18:06     ` Mikko Perttunen
2018-05-08 11:44 ` [PATCH 7/8] arm64: tegra: Add nodes for tcu on Tegra194 Mikko Perttunen
2018-05-22 16:28   ` Jon Hunter
2018-05-08 11:44 ` [PATCH 8/8] arm64: tegra: Mark tcu as primary serial port on Tegra194 P2888 Mikko Perttunen
2018-05-22 16:29   ` Jon Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAHp75VfYF_u2bZ+temGbReEB9K-t3A75aUNYwffyv9-=zEi0Lw@mail.gmail.com' \
    --to=andy.shevchenko@gmail.com \
    --cc=araza@nvidia.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jassisinghbrar@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mperttunen@nvidia.com \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    --subject='Re: [PATCH 6/8] serial: Add Tegra Combined UART driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).