LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: John Stultz <john.stultz@linaro.org>
To: Ryan Grachek <ryan@edited.us>, Wei Xu <xuwei5@hisilicon.com>,
	Arnd Bergmann <arnd@arndb.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
	YongQin Liu <yongqin.liu@linaro.org>,
	lkml <linux-kernel@vger.kernel.org>
Subject: REGRESSION: HiKey eMMC corruption
Date: Fri, 18 May 2018 15:59:57 -0700	[thread overview]
Message-ID: <CALAqxLX5qPq_5CQwubzk5hiL3kkes7nK9NGqtnyddXKfyaJKTg@mail.gmail.com> (raw)

The last few months have been busy and I've not been ontop of my
upstream testing as well as I'd like, but today I did manage to chase
down an issue I've been seeing since 4.17-rc1 on the HiKey board,
which was causing emmc corruption and stopping the board from booting.

Symptoms usually looked like:
[    1.690448] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot
req 400000Hz, actual 400000HZ div = 31)
...
[    1.777288] mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot
req 150000000Hz, actual 148800000HZ div = 0)
[    1.777760] mmc0: new HS200 MMC card at address 0001
...
[   12.214381] dwmmc_k3 f723d000.dwmmc0: Unexpected command timeout, state 3
[   12.457420] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot
req 400000Hz, actual 400000HZ div = 31)
[   12.536676] mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot
req 150000000Hz, actual 148800000HZ div = 0)
[   12.616827] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot
req 400000Hz, actual 400000HZ div = 31)
[   12.695742] mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot
req 150000000Hz, actual 148800000HZ div = 0)
[   12.772067] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot
req 400000Hz, actual 400000HZ div = 31)
[   12.850429] mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot
req 150000000Hz, actual 148800000HZ div = 0)
[   12.863384] print_req_error: I/O error, dev mmcblk0, sector 8810504
[   12.869778] Aborting journal on device mmcblk0p10-8.
[   12.887900] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot
req 400000Hz, actual 400000HZ div = 31)
[   12.967509] mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot
req 150000000Hz, actual 148800000HZ div = 0)
[   13.130182] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot
req 400000Hz, actual 400000HZ div = 31)
[   13.209438] mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot
req 150000000Hz, actual 148800000HZ div = 0)
[   13.302085] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot
req 400000Hz, actual 400000HZ div = 31)
[   13.380462] mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot
req 150000000Hz, actual 148800000HZ div = 0)
[   13.494539] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot
req 400000Hz, actual 400000HZ div = 31)
[   13.571420] mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot
req 150000000Hz, actual 148800000HZ div = 0)
[   13.640817] EXT4-fs error (device mmcblk0p10):
ext4_journal_check_start:61: Detected aborted journal
[   13.650043] EXT4-fs (mmcblk0p10): Remounting filesystem read-only

And quite often this would result in a disk that wouldn't properly
boot even with older kernels.

I've narrowed the issue down to the following change:
abd7d0972a192 ("arm64: dts: hikey: Enable HS200 mode on eMMC")

Reverting this change seems to make things work reliably for me.

Should we revert that upstream for now?

thanks
-john

             reply	other threads:[~2018-05-18 23:00 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-18 22:59 John Stultz [this message]
2018-05-21  8:34 ` Wei Xu
2018-05-21  9:03   ` Leo Yan
2018-05-21 17:14     ` John Stultz
2018-05-21 19:09   ` John Stultz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CALAqxLX5qPq_5CQwubzk5hiL3kkes7nK9NGqtnyddXKfyaJKTg@mail.gmail.com \
    --to=john.stultz@linaro.org \
    --cc=arnd@arndb.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ryan@edited.us \
    --cc=ulf.hansson@linaro.org \
    --cc=xuwei5@hisilicon.com \
    --cc=yongqin.liu@linaro.org \
    --subject='Re: REGRESSION: HiKey eMMC corruption' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).