LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Rob Herring <robh+dt@kernel.org>
To: Dario Binacchi <dariobin@libero.it>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Marc Kleine-Budde <mkl@pengutronix.de>,
	Wolfgang Grandegger <wg@grandegger.com>,
	devicetree@vger.kernel.org, linux-can@vger.kernel.org,
	netdev <netdev@vger.kernel.org>
Subject: Re: [PATCH v3] dt-bindings: net: can: c_can: convert to json-schema
Date: Fri, 30 Jul 2021 18:55:53 -0600	[thread overview]
Message-ID: <CAL_JsqK0bVV7s3Pw5=_JSo171jnDrCTM5erKz5-dVWA0wR+b7g@mail.gmail.com> (raw)
In-Reply-To: <20210730171646.2406-1-dariobin@libero.it>

On Fri, Jul 30, 2021 at 11:16 AM Dario Binacchi <dariobin@libero.it> wrote:
>
> Convert the Bosch C_CAN/D_CAN controller device tree binding
> documentation to json-schema.
>
> Document missing properties.
> Remove "ti,hwmods" as it is no longer used in TI dts.
> Make "clocks" required as it is used in all dts.
> Correct nodename in the example.
>
> Signed-off-by: Dario Binacchi <dariobin@libero.it>
>
> ---
>
> Changes in v3:
>  - Add type (phandle-array) and size (maxItems: 2) to syscon-raminit
>    property.
>
> Changes in v2:
>  - Drop Documentation references.
>
>  .../bindings/net/can/bosch,c_can.yaml         | 85 +++++++++++++++++++
>  .../devicetree/bindings/net/can/c_can.txt     | 65 --------------
>  2 files changed, 85 insertions(+), 65 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
>  delete mode 100644 Documentation/devicetree/bindings/net/can/c_can.txt
>
> diff --git a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
> new file mode 100644
> index 000000000000..416db97fbf9d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
> @@ -0,0 +1,85 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/can/bosch,c_can.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bosch C_CAN/D_CAN controller Device Tree Bindings
> +
> +description: Bosch C_CAN/D_CAN controller for CAN bus
> +
> +maintainers:
> +  - Dario Binacchi <dariobin@libero.it>
> +
> +allOf:
> +  - $ref: can-controller.yaml#
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - enum:
> +          - bosch,c_can
> +          - bosch,d_can
> +          - ti,dra7-d_can
> +          - ti,am3352-d_can
> +      - items:
> +          - enum:
> +              - ti,am4372-d_can
> +          - const: ti,am3352-d_can
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  power-domains:
> +    description: |
> +      Should contain a phandle to a PM domain provider node and an args
> +      specifier containing the DCAN device id value. It's mandatory for
> +      Keystone 2 66AK2G SoCs only.
> +    maxItems: 1
> +
> +  clocks:
> +    description: |
> +      CAN functional clock phandle.
> +    maxItems: 1
> +
> +  clock-names:
> +    maxItems: 1
> +
> +  syscon-raminit:
> +    description: |
> +      Handle to system control region that contains the RAMINIT register,
> +      register offset to the RAMINIT register and the CAN instance number (0
> +      offset).
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    maxItems: 2

Sorry, I misread that and counted 2, not 3 items. But you should have
run the checks.

> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    can@481d0000 {
> +        compatible = "bosch,d_can";
> +        reg = <0x481d0000 0x2000>;
> +        interrupts = <55>;
> +        interrupt-parent = <&intc>;
> +        status = "disabled";

Don't show 'status' in examples. Why would one want an example disabled?

> +    };
> +  - |
> +    can@0 {
> +        compatible = "ti,am3352-d_can";
> +        reg = <0x0 0x2000>;
> +        clocks = <&dcan1_fck>;
> +        clock-names = "fck";
> +        syscon-raminit = <&scm_conf 0x644 1>;
> +        interrupts = <55>;
> +        status = "disabled";
> +    };
> diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt
> deleted file mode 100644
> index 366479806acb..000000000000
> --- a/Documentation/devicetree/bindings/net/can/c_can.txt
> +++ /dev/null
> @@ -1,65 +0,0 @@
> -Bosch C_CAN/D_CAN controller Device Tree Bindings
> --------------------------------------------------
> -
> -Required properties:
> -- compatible           : Should be "bosch,c_can" for C_CAN controllers and
> -                         "bosch,d_can" for D_CAN controllers.
> -                         Can be "ti,dra7-d_can", "ti,am3352-d_can" or
> -                         "ti,am4372-d_can".
> -- reg                  : physical base address and size of the C_CAN/D_CAN
> -                         registers map
> -- interrupts           : property with a value describing the interrupt
> -                         number
> -
> -The following are mandatory properties for DRA7x, AM33xx and AM43xx SoCs only:
> -- ti,hwmods            : Must be "d_can<n>" or "c_can<n>", n being the
> -                         instance number
> -
> -The following are mandatory properties for Keystone 2 66AK2G SoCs only:
> -- power-domains                : Should contain a phandle to a PM domain provider node
> -                         and an args specifier containing the DCAN device id
> -                         value. This property is as per the binding,
> -                         Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
> -- clocks               : CAN functional clock phandle. This property is as per the
> -                         binding,
> -                         Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
> -
> -Optional properties:
> -- syscon-raminit       : Handle to system control region that contains the
> -                         RAMINIT register, register offset to the RAMINIT
> -                         register and the CAN instance number (0 offset).
> -
> -Note: "ti,hwmods" field is used to fetch the base address and irq
> -resources from TI, omap hwmod data base during device registration.
> -Future plan is to migrate hwmod data base contents into device tree
> -blob so that, all the required data will be used from device tree dts
> -file.
> -
> -Example:
> -
> -Step1: SoC common .dtsi file
> -
> -       dcan1: d_can@481d0000 {
> -               compatible = "bosch,d_can";
> -               reg = <0x481d0000 0x2000>;
> -               interrupts = <55>;
> -               interrupt-parent = <&intc>;
> -               status = "disabled";
> -       };
> -
> -(or)
> -
> -       dcan1: d_can@481d0000 {
> -               compatible = "bosch,d_can";
> -               ti,hwmods = "d_can1";
> -               reg = <0x481d0000 0x2000>;
> -               interrupts = <55>;
> -               interrupt-parent = <&intc>;
> -               status = "disabled";
> -       };
> -
> -Step 2: board specific .dts file
> -
> -       &dcan1 {
> -               status = "okay";
> -       };
> --
> 2.17.1
>

  parent reply	other threads:[~2021-07-31  0:56 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-30 17:16 Dario Binacchi
2021-07-30 22:28 ` Rob Herring
2021-07-31  0:55 ` Rob Herring [this message]
2021-08-01  7:51   ` Dario Binacchi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAL_JsqK0bVV7s3Pw5=_JSo171jnDrCTM5erKz5-dVWA0wR+b7g@mail.gmail.com' \
    --to=robh+dt@kernel.org \
    --cc=dariobin@libero.it \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    --cc=netdev@vger.kernel.org \
    --cc=wg@grandegger.com \
    --subject='Re: [PATCH v3] dt-bindings: net: can: c_can: convert to json-schema' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox