LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert@linux-m68k.org>
To: Michel Pollet <michel.pollet@bp.renesas.com>
Cc: Linux-Renesas <linux-renesas-soc@vger.kernel.org>,
	Simon Horman <horms@verge.net.au>,
	Phil Edworthy <phil.edworthy@renesas.com>,
	Michel Pollet <buserror+upstream@gmail.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	linux-clk <linux-clk@vger.kernel.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v7 1/5] dt-bindings: Add the r9a06g032-sysctrl.h file
Date: Fri, 25 May 2018 12:31:43 +0200	[thread overview]
Message-ID: <CAMuHMdVzN0Cbc9+MJqC4EzVgD3bkDixkf10NA13ko87cMwvpLA@mail.gmail.com> (raw)
In-Reply-To: <1527154169-32380-2-git-send-email-michel.pollet@bp.renesas.com>

Hi Michel,

On Thu, May 24, 2018 at 11:28 AM, Michel Pollet
<michel.pollet@bp.renesas.com> wrote:
> This adds the constants necessary to use the renesas,r9a06g032-sysctrl node.
>
> Signed-off-by: Michel Pollet <michel.pollet@bp.renesas.com>

Thanks for your patch!

> --- /dev/null
> +++ b/include/dt-bindings/clock/r9a06g032-sysctrl.h

You can still call this file r9a06g032-clocks.h, if you want, as it
contains clock definitions only.

> @@ -0,0 +1,187 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * R9A06G032 sysctrl IDs
> + *
> + * Copyright (C) 2018 Renesas Electronics Europe Limited
> + *
> + * Michel Pollet <michel.pollet@bp.renesas.com>, <buserror@gmail.com>
> + * Derived from zx-reboot.c
> + */
> +
> +#ifndef __DT_BINDINGS_R9A06G032_SYSCTRL_H__
> +#define __DT_BINDINGS_R9A06G032_SYSCTRL_H__
> +
> +#define R9A06G032_CLKOUT                       0
> +#define R9A06G032_CLK_PLL_USB                  1
> +#define R9A06G032_CLK_48                       1 /* AKA CLK_PLL_USB */
> +#define R9A06G032_CLKOUT_D10                   2
> +#define R9A06G032_CLKOUT_D16                   3
> +#define R9A06G032_MSEBIS_CLK                   3 /* AKA CLKOUT_D16 */
> +#define R9A06G032_MSEBIM_CLK                   3 /* AKA CLKOUT_D16 */
> +#define R9A06G032_CLKOUT_D160                  4
> +#define R9A06G032_CLKOUT_D1OR2                 5
> +#define R9A06G032_CLK_DDRPHY_PLLCLK            5 /* AKA CLKOUT_D1OR2 */

[...]

I have 3 comments:

  1. I had expected this list to match (both name- and order-wise) Appendix
     C ("Clock Tree Structure") in the RZ/N1[DSL] User’s Manual: System
     Introduction, Multiplexing, Electrical and Mechanical Information.
     That would make it easier to review.

  2. These definitions seems to be a mix of:
       1. Internal core clocks,
       2. Other core clocks,
       3. Module clocks.

     The internal clocks do not need to be referenced from DT, so I would
     not make them part of the DT bindings.

  3. It looks like the module clocks can be referred to by register offset
     and bit position, which is similar to how this is handled on R-Car
     SoCs.
     Perhaps you can just drop the definitions for these from the header
     file, and refer to them by (combined) register offset and bit position
     instead?
     Or am I missing something?
     I believe this can also be done for the module resets (later).

Thanks again!

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

  reply	other threads:[~2018-05-25 10:31 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-24  9:28 [PATCH v7 0/5] arm: Base support for Renesas RZN1D-DB Board Michel Pollet
2018-05-24  9:28 ` [PATCH v7 1/5] dt-bindings: Add the r9a06g032-sysctrl.h file Michel Pollet
2018-05-25 10:31   ` Geert Uytterhoeven [this message]
2018-05-31  9:11     ` M P
2018-05-31  9:32       ` Geert Uytterhoeven
2018-05-31 10:01         ` M P
2018-06-01  8:18           ` Geert Uytterhoeven
2018-05-24  9:28 ` [PATCH v7 2/5] dt-bindings: clock: renesas,r9a06g032-sysctrl: documentation Michel Pollet
2018-05-25  9:23   ` Geert Uytterhoeven
2018-05-31 10:16     ` M P
2018-06-01  8:22       ` Geert Uytterhoeven
2018-05-24  9:28 ` [PATCH v7 3/5] ARM: dts: Renesas R9A06G032 base device tree file Michel Pollet
2018-05-25  9:27   ` Geert Uytterhoeven
2018-05-28  9:15     ` Simon Horman
2018-05-24  9:28 ` [PATCH v7 4/5] ARM: dts: Renesas RZN1D-DB Board base file Michel Pollet
2018-05-25  9:28   ` Geert Uytterhoeven
2018-05-24  9:28 ` [PATCH v7 5/5] clk: renesas: Renesas R9A06G032 clock driver Michel Pollet
2018-05-26 13:45   ` kbuild test robot
2018-05-30 19:49   ` Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAMuHMdVzN0Cbc9+MJqC4EzVgD3bkDixkf10NA13ko87cMwvpLA@mail.gmail.com \
    --to=geert@linux-m68k.org \
    --cc=buserror+upstream@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=horms@verge.net.au \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=michel.pollet@bp.renesas.com \
    --cc=mturquette@baylibre.com \
    --cc=phil.edworthy@renesas.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --subject='Re: [PATCH v7 1/5] dt-bindings: Add the r9a06g032-sysctrl.h file' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).