LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Baolin Wang <baolin.wang@linaro.org>
To: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	xiaotong.lu@spreadtrum.com, Mark Brown <broonie@kernel.org>,
	linux-leds@vger.kernel.org, DTML <devicetree@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 2/2] leds: Add Spreadtrum SC27xx breathing light controller driver
Date: Wed, 9 May 2018 10:34:53 +0800	[thread overview]
Message-ID: <CAMz4ku+xXgdC-2irgvwHnvsjoLx2FRvCKQQcFedLVjYuFR3J=w@mail.gmail.com> (raw)
In-Reply-To: <085f9ca1-13de-36d6-18eb-ac0e560ba237@gmail.com>

Hi Jacek,

On 9 May 2018 at 04:54, Jacek Anaszewski <jacek.anaszewski@gmail.com> wrote:
> Hi Baolin,
>
> Thank you for the updated version.
>
> I have few notes below, please take a look.
>
>
> On 05/08/2018 07:39 AM, Baolin Wang wrote:
>>
>> From: Xiaotong Lu <xiaotong.lu@spreadtrum.com>
>>
>> This patch adds Spreadtrum SC27xx PMIC series breathing light controller
>> driver, which can support 3 LEDs. Each LED can work at normal PWM mode
>> and breathing mode.
>>
>> Signed-off-by: Xiaotong Lu <xiaotong.lu@spreadtrum.com>
>> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
>> ---
>> Changes since v1:
>>   - Add ABI documentation.
>>   - Add mutex protection in case of concurrent access.
>>   - Change the LED device name pattern.
>>   - Fix build warning.
>> ---
>>   .../ABI/testing/sysfs-class-led-driver-sc27xx      |   19 +
>>   drivers/leds/Kconfig                               |   11 +
>>   drivers/leds/Makefile                              |    1 +
>>   drivers/leds/leds-sc27xx-bltc.c                    |  387
>> ++++++++++++++++++++
>>   4 files changed, 418 insertions(+)
>>   create mode 100644
>> Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
>>   create mode 100644 drivers/leds/leds-sc27xx-bltc.c
>>
>> diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
>> b/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
>> new file mode 100644
>> index 0000000..22166fb
>> --- /dev/null
>> +++ b/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
>> @@ -0,0 +1,19 @@
>> +What:          /sys/class/leds/<led>/rise_time
>> +What:          /sys/class/leds/<led>/high_time
>> +What:          /sys/class/leds/<led>/fall_time
>> +What:          /sys/class/leds/<led>/low_time
>> +Date:          May 2018
>> +KernelVersion: 4.18
>> +Contact:       Xiaotong Lu <xiaotong.lu@spreadtrum.com>
>> +Description:
>> +               Set the pattern generator rise, high, fall and low
>> +               times (0..63). It's unit is 0.125s, it should be > 0.
>> +
>> +               1 - 125 ms
>> +               2 - 250 ms
>> +               3 - 375 ms
>> +               ...
>> +               ...
>> +               ...
>> +               62 - 7.75 s
>> +               63 - 7.875 s
>
>
> It would be good to describe here how altering these settings
> interacts with brightness changes. E.g., AFAICS from the code
> the pattern is turned off when setting brightness to 0, and
> turned on when writing any of these files.

Correct. We need set rise, high, fall and low time firstly, then turn
on the LED with setting brightness > 0. Will add more description to
explain how to use them.

>
> I'm also not sure if making these files RO is a good idea.
> How about making them RW? Any brightness change would
> reset those values to 0 and turn off pattern generator.

Sure, will make them RW.

>
> Otherwise it would be not possible to check whether pattern
> generator is enabled or not.
>
>
>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>> index 2c896c0..319449b 100644
>> --- a/drivers/leds/Kconfig
>> +++ b/drivers/leds/Kconfig
>> @@ -647,6 +647,17 @@ config LEDS_IS31FL32XX
>>           LED controllers. They are I2C devices with multiple
>> constant-current
>>           channels, each with independent 256-level PWM control.
>>   +config LEDS_SC27XX_BLTC
>> +       tristate "LED support for the SC27xx breathing light controller"
>> +       depends on LEDS_CLASS && MFD_SC27XX_PMIC
>> +       depends on OF
>> +       help
>> +         Say Y here to include support for the SC27xx breathing light
>> controller
>> +         LEDs.
>> +
>> +         This driver can also be built as a module. If so the module will
>> be
>> +         called leds-sc27xx-bltc.
>> +
>>   comment "LED driver for blink(1) USB RGB LED is under Special HID
>> drivers (HID_THINGM)"
>>     config LEDS_BLINKM
>> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
>> index 91eca81..ff6917e 100644
>> --- a/drivers/leds/Makefile
>> +++ b/drivers/leds/Makefile
>> @@ -76,6 +76,7 @@ obj-$(CONFIG_LEDS_MLXREG)             += leds-mlxreg.o
>>   obj-$(CONFIG_LEDS_NIC78BX)            += leds-nic78bx.o
>>   obj-$(CONFIG_LEDS_MT6323)             += leds-mt6323.o
>>   obj-$(CONFIG_LEDS_LM3692X)            += leds-lm3692x.o
>> +obj-$(CONFIG_LEDS_SC27XX_BLTC)         += leds-sc27xx-bltc.o
>>     # LED SPI Drivers
>>   obj-$(CONFIG_LEDS_DAC124S085)         += leds-dac124s085.o
>> diff --git a/drivers/leds/leds-sc27xx-bltc.c
>> b/drivers/leds/leds-sc27xx-bltc.c
>> new file mode 100644
>> index 0000000..61c5b72
>> --- /dev/null
>> +++ b/drivers/leds/leds-sc27xx-bltc.c
>> @@ -0,0 +1,387 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// Copyright (C) 2018 Spreadtrum Communications Inc.
>> +
>> +#include <linux/leds.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regmap.h>
>> +#include <uapi/linux/uleds.h>
>> +
>> +/* PMIC global control register definition */
>> +#define SC27XX_MODULE_EN0      0xc08
>> +#define SC27XX_CLK_EN0         0xc18
>> +#define SC27XX_RGB_CTRL                0xebc
>> +
>> +#define SC27XX_BLTC_EN         BIT(9)
>> +#define SC27XX_RTC_EN          BIT(7)
>> +#define SC27XX_RGB_PD          BIT(0)
>> +
>> +/* Breathing light controller register definition */
>> +#define SC27XX_LEDS_CTRL       0x00
>> +#define SC27XX_LEDS_PRESCALE   0x04
>> +#define SC27XX_LEDS_DUTY       0x08
>> +#define SC27XX_LEDS_CURVE0     0x0c
>> +#define SC27XX_LEDS_CURVE1     0x10
>> +
>> +#define SC27XX_CTRL_SHIFT      4
>> +#define SC27XX_LED_RUN         BIT(0)
>> +#define SC27XX_LED_TYPE                BIT(1)
>> +
>> +#define SC27XX_DUTY_SHIFT      8
>> +#define SC27XX_DUTY_MASK       GENMASK(15, 0)
>> +#define SC27XX_MOD_MASK                GENMASK(7, 0)
>> +
>> +#define SC27XX_CURVE_SHIFT     8
>> +#define SC27XX_CURVE_L_MASK    GENMASK(7, 0)
>> +#define SC27XX_CURVE_H_MASK    GENMASK(15, 8)
>> +
>> +#define SC27XX_LEDS_OFFSET     0x10
>> +#define SC27XX_LEDS_MAX                3
>> +#define SC27XX_LEDS_TIME_MAX   63
>> +
>> +/*
>> + * The SC27xx breathing light controller can support 3 outputs: red LED,
>> + * green LED and blue LED. Each LED can support normal PWM mode and
>> breathing
>> + * mode.
>> + *
>> + * In breathing mode, the LED output curve includes rise, high, fall and
>> low 4
>> + * stages, and the duration of each stage is configurable.
>> + */
>> +enum sc27xx_led_config {
>> +       SC27XX_RISE_TIME,
>> +       SC27XX_FALL_TIME,
>> +       SC27XX_HIGH_TIME,
>> +       SC27XX_LOW_TIME,
>> +};
>> +
>> +struct sc27xx_led {
>> +       char name[LED_MAX_NAME_SIZE];
>> +       struct led_classdev ldev;
>> +       struct sc27xx_led_priv *priv;
>> +       enum led_brightness value;
>
>
> This property is redundant - you have brightness in the
> struct led_classdev.

Yes, will remove this.

>> +       u8 line;
>> +       bool breath_mode;
>> +       bool active;
>> +};
>> +
>> +struct sc27xx_led_priv {
>> +       struct sc27xx_led leds[SC27XX_LEDS_MAX];
>> +       struct regmap *regmap;
>> +       struct mutex lock;
>> +       u32 base;
>> +};
>> +
>> +#define to_sc27xx_led(ldev) \
>> +       container_of(ldev, struct sc27xx_led, ldev)
>> +
>> +static int sc27xx_led_init(struct regmap *regmap)
>> +{
>> +       int err;
>> +
>> +       err = regmap_update_bits(regmap, SC27XX_MODULE_EN0,
>> SC27XX_BLTC_EN,
>> +                                SC27XX_BLTC_EN);
>> +       if (err)
>> +               return err;
>> +
>> +       err = regmap_update_bits(regmap, SC27XX_CLK_EN0, SC27XX_RTC_EN,
>> +                                SC27XX_RTC_EN);
>> +       if (err)
>> +               return err;
>> +
>> +       return regmap_update_bits(regmap, SC27XX_RGB_CTRL, SC27XX_RGB_PD,
>> 0);
>> +}
>> +
>> +static u32 sc27xx_led_get_offset(struct sc27xx_led *leds)
>> +{
>> +       return leds->priv->base + SC27XX_LEDS_OFFSET * leds->line;
>> +}
>> +
>> +static int sc27xx_led_enable(struct sc27xx_led *leds)
>> +{
>> +       u32 base = sc27xx_led_get_offset(leds);
>> +       u32 ctrl_base = leds->priv->base + SC27XX_LEDS_CTRL;
>> +       u8 ctrl_shift = SC27XX_CTRL_SHIFT * leds->line;
>> +       struct regmap *regmap = leds->priv->regmap;
>> +       int err;
>> +
>> +       err = regmap_update_bits(regmap, base + SC27XX_LEDS_DUTY,
>> +                                SC27XX_DUTY_MASK,
>> +                                (leds->value  << SC27XX_DUTY_SHIFT) |
>> +                                SC27XX_MOD_MASK);
>> +       if (err)
>> +               return err;
>> +
>> +       if (leds->breath_mode)
>> +               return regmap_update_bits(regmap, ctrl_base,
>> +                                         SC27XX_LED_RUN << ctrl_shift,
>> +                                         SC27XX_LED_RUN << ctrl_shift);
>> +
>> +       return regmap_update_bits(regmap, ctrl_base,
>> +                       (SC27XX_LED_RUN | SC27XX_LED_TYPE) << ctrl_shift,
>> +                       (SC27XX_LED_RUN | SC27XX_LED_TYPE) << ctrl_shift);
>> +}
>> +
>> +static int sc27xx_led_disable(struct sc27xx_led *leds)
>> +{
>> +       u8 ctrl_shift = SC27XX_CTRL_SHIFT * leds->line;
>> +
>> +       leds->breath_mode = false;
>> +
>> +       return regmap_update_bits(leds->priv->regmap,
>> +                       leds->priv->base + SC27XX_LEDS_CTRL,
>> +                       (SC27XX_LED_RUN | SC27XX_LED_TYPE) << ctrl_shift,
>> 0);
>> +}
>> +
>> +static int sc27xx_led_set(struct led_classdev *ldev, enum led_brightness
>> value)
>> +{
>> +       struct sc27xx_led *leds = to_sc27xx_led(ldev);
>> +       int err;
>> +
>> +       mutex_lock(&leds->priv->lock);
>
>
> Empty line here please.

OK.

>
>> +       leds->value = value;
>
>
> It should not be needed at all.

Yes.

>
>> +       if (value == LED_OFF)
>> +               err = sc27xx_led_disable(leds);
>> +       else
>> +               err = sc27xx_led_enable(leds);
>
>
> Empty line here please.

OK.

>
>> +       mutex_unlock(&leds->priv->lock);
>> +
>> +       return err;
>> +}
>> +
>> +static int sc27xx_led_config(struct sc27xx_led *leds,
>> +                            enum sc27xx_led_config config, u32 val)
>> +{
>> +       u32 base = sc27xx_led_get_offset(leds);
>> +       struct regmap *regmap = leds->priv->regmap;
>> +       int err;
>> +
>> +       mutex_lock(&leds->priv->lock);
>
>
> Empty line here please.

OK.

>
>> +       switch (config) {
>> +       case SC27XX_RISE_TIME:
>> +               err = regmap_update_bits(regmap, base +
>> SC27XX_LEDS_CURVE0,
>> +                                        SC27XX_CURVE_L_MASK, val);
>> +               break;
>> +       case SC27XX_FALL_TIME:
>> +               err = regmap_update_bits(regmap, base +
>> SC27XX_LEDS_CURVE0,
>> +                                        SC27XX_CURVE_H_MASK,
>> +                                        val << SC27XX_CURVE_SHIFT);
>> +               break;
>> +       case SC27XX_HIGH_TIME:
>> +               err = regmap_update_bits(regmap, base +
>> SC27XX_LEDS_CURVE1,
>> +                                        SC27XX_CURVE_L_MASK, val);
>> +               break;
>> +       case SC27XX_LOW_TIME:
>> +               err = regmap_update_bits(regmap, base +
>> SC27XX_LEDS_CURVE1,
>> +                                        SC27XX_CURVE_H_MASK,
>> +                                        val << SC27XX_CURVE_SHIFT);
>> +               break;
>> +       default:
>> +               err = -ENOTSUPP;
>> +               break;
>> +       }
>> +
>> +       if (!err && !leds->breath_mode)
>> +               leds->breath_mode = true;
>> +
>> +       mutex_unlock(&leds->priv->lock);
>> +
>> +       return err;
>> +}
>> +
>> +static ssize_t rise_time_store(struct device *dev,
>> +                              struct device_attribute *attr,
>> +                              const char *buf, size_t size)
>> +{
>> +       struct led_classdev *ldev = dev_get_drvdata(dev);
>> +       struct sc27xx_led *leds = to_sc27xx_led(ldev);
>> +       u32 val;
>> +       int err;
>> +
>> +       if (kstrtou32(buf, 10, &val) || val > SC27XX_LEDS_TIME_MAX)
>> +               return -EINVAL;
>> +
>> +       err = sc27xx_led_config(leds, SC27XX_RISE_TIME, val);
>> +       if (err)
>> +               return err;
>> +
>> +       return size;
>> +}
>> +
>> +static ssize_t fall_time_store(struct device *dev,
>> +                              struct device_attribute *attr,
>> +                              const char *buf, size_t size)
>> +{
>> +       struct led_classdev *ldev = dev_get_drvdata(dev);
>> +       struct sc27xx_led *leds = to_sc27xx_led(ldev);
>> +       u32 val;
>> +       int err;
>> +
>> +       if (kstrtou32(buf, 10, &val) || val > SC27XX_LEDS_TIME_MAX)
>> +               return -EINVAL;
>> +
>> +       err = sc27xx_led_config(leds, SC27XX_FALL_TIME, val);
>> +       if (err)
>> +               return err;
>> +
>> +       return size;
>> +}
>> +
>> +static ssize_t high_time_store(struct device *dev,
>> +                              struct device_attribute *attr,
>> +                              const char *buf, size_t size)
>> +{
>> +       struct led_classdev *ldev = dev_get_drvdata(dev);
>> +       struct sc27xx_led *leds = to_sc27xx_led(ldev);
>> +       u32 val;
>> +       int err;
>> +
>> +       if (kstrtou32(buf, 10, &val) || val > SC27XX_LEDS_TIME_MAX)
>> +               return -EINVAL;
>> +
>> +       err = sc27xx_led_config(leds, SC27XX_HIGH_TIME, val);
>> +       if (err)
>> +               return err;
>> +
>> +       return size;
>> +}
>> +
>> +static ssize_t low_time_store(struct device *dev,
>> +                             struct device_attribute *attr,
>> +                             const char *buf, size_t size)
>> +{
>> +       struct led_classdev *ldev = dev_get_drvdata(dev);
>> +       struct sc27xx_led *leds = to_sc27xx_led(ldev);
>> +       u32 val;
>> +       int err;
>> +
>> +       if (kstrtou32(buf, 10, &val) || val > SC27XX_LEDS_TIME_MAX)
>> +               return -EINVAL;
>> +
>> +       err = sc27xx_led_config(leds, SC27XX_LOW_TIME, val);
>> +       if (err)
>> +               return err;
>> +
>> +       return size;
>> +}
>> +
>> +static DEVICE_ATTR_WO(rise_time);
>> +static DEVICE_ATTR_WO(fall_time);
>> +static DEVICE_ATTR_WO(high_time);
>> +static DEVICE_ATTR_WO(low_time);
>> +
>> +static struct attribute *sc27xx_led_attrs[] = {
>> +       &dev_attr_rise_time.attr,
>> +       &dev_attr_fall_time.attr,
>> +       &dev_attr_high_time.attr,
>> +       &dev_attr_low_time.attr,
>> +       NULL,
>> +};
>> +ATTRIBUTE_GROUPS(sc27xx_led);
>> +
>> +static int sc27xx_led_register(struct device *dev, struct sc27xx_led_priv
>> *priv)
>> +{
>> +       int i, err;
>> +
>> +       err = sc27xx_led_init(priv->regmap);
>> +       if (err)
>> +               return err;
>> +
>> +       for (i = 0; i < SC27XX_LEDS_MAX; i++) {
>> +               struct sc27xx_led *led = &priv->leds[i];
>> +
>> +               if (!led->active)
>> +                       continue;
>> +
>> +               led->line = i;
>> +               led->priv = priv;
>> +               led->ldev.name = led->name;
>> +               led->ldev.brightness_set_blocking = sc27xx_led_set;
>> +               led->ldev.max_brightness = LED_FULL;
>
>
> LED core will set max_brightness to LED_FULL if initialized to 0,
> so we can skip this line.

Sure.

>> +               led->ldev.groups = sc27xx_led_groups;
>> +
>> +               err = devm_led_classdev_register(dev, &led->ldev);
>> +               if (err)
>> +                       return err;
>> +       }
>> +
>> +       return 0;
>> +}
>> +
>> +static int sc27xx_led_probe(struct platform_device *pdev)
>> +{
>> +       struct device *dev = &pdev->dev;
>> +       struct device_node *np = dev->of_node, *child;
>> +       struct sc27xx_led_priv *priv;
>> +       const char *str;
>> +       u32 base, count, reg;
>> +       int err;
>> +
>> +       count = of_get_child_count(np);
>> +       if (!count || count > SC27XX_LEDS_MAX)
>> +               return -EINVAL;
>> +
>> +       err = of_property_read_u32(np, "reg", &base);
>> +       if (err) {
>> +               dev_err(dev, "fail to get reg of property\n");
>> +               return err;
>> +       }
>> +
>> +       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>> +       if (!priv)
>> +               return -ENOMEM;
>> +
>> +       mutex_init(&priv->lock);
>> +       priv->base = base;
>> +       priv->regmap = dev_get_regmap(dev->parent, NULL);
>> +       if (IS_ERR(priv->regmap)) {
>> +               err = PTR_ERR(priv->regmap);
>> +               dev_err(dev, "failed to get regmap: %d\n", err);
>> +               return err;
>> +       }
>> +
>> +       for_each_child_of_node(np, child) {
>> +               err = of_property_read_u32(child, "reg", &reg);
>> +               if (err) {
>> +                       of_node_put(child);
>
>
> Now we need also mutex_destroy() in the error path, so please add relevant
> label and go there from here.

OK.

>
>> +                       return err;
>> +               }
>> +
>> +               if (reg >= SC27XX_LEDS_MAX || priv->leds[reg].active) {
>> +                       of_node_put(child);
>> +                       return -EINVAL;
>
>
> Ditto.
>
>
>> +               }
>> +
>> +               priv->leds[reg].active = true;
>> +
>> +               err = of_property_read_string(child, "label", &str);
>> +               if (err)
>> +                       snprintf(priv->leds[reg].name, LED_MAX_NAME_SIZE,
>> +                                "sc27xx::");
>> +               else
>> +                       snprintf(priv->leds[reg].name, LED_MAX_NAME_SIZE,
>> +                                "sc27xx:%s", str);
>> +       }
>> +
>> +       return sc27xx_led_register(dev, priv);
>> +}
>> +
>> +static const struct of_device_id sc27xx_led_of_match[] = {
>> +       { .compatible = "sprd,sc2731-bltc", },
>> +       { }
>> +};
>> +MODULE_DEVICE_TABLE(of, sc27xx_led_of_match);
>> +
>> +static struct platform_driver sc27xx_led_driver = {
>> +       .driver = {
>> +               .name = "sprd-bltc",
>> +               .of_match_table = sc27xx_led_of_match,
>> +       },
>> +       .probe = sc27xx_led_probe,
>
>
> "remove" op will be needed as well for mutex_destroy().

Yes. Thanks for your comments.

-- 
Baolin.wang
Best Regards

  reply	other threads:[~2018-05-09  2:34 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-08  5:39 [PATCH v2 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation Baolin Wang
2018-05-08  5:39 ` [PATCH v2 2/2] leds: Add Spreadtrum SC27xx breathing light controller driver Baolin Wang
2018-05-08 20:54   ` Jacek Anaszewski
2018-05-09  2:34     ` Baolin Wang [this message]
2018-05-09 14:25   ` Pavel Machek
2018-05-09 19:40     ` Jacek Anaszewski
2018-05-10 11:37       ` Pavel Machek
2018-05-10 19:41         ` Jacek Anaszewski
2018-05-12  8:35           ` Pavel Machek
2018-05-12 20:44             ` Jacek Anaszewski
2018-05-13  2:19               ` Baolin Wang
2018-06-21  7:25               ` Baolin Wang
2018-05-10  3:12     ` Baolin Wang
2018-05-08 15:43 ` [PATCH v2 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation Rob Herring
2018-05-09 14:25 ` Pavel Machek
2018-05-09 20:09   ` Jacek Anaszewski
2018-05-10  1:55   ` Baolin Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAMz4ku+xXgdC-2irgvwHnvsjoLx2FRvCKQQcFedLVjYuFR3J=w@mail.gmail.com' \
    --to=baolin.wang@linaro.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jacek.anaszewski@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    --cc=xiaotong.lu@spreadtrum.com \
    --subject='Re: [PATCH v2 2/2] leds: Add Spreadtrum SC27xx breathing light controller driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).