LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Peter Chen <peter.chen@nxp.com>
To: Yossi Mansharoff <yossim@codeaurora.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	"open list:CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLER"
	<linux-usb@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>
Cc: "robh@kernel.org" <robh@kernel.org>,
	"swboyd@chromium.org" <swboyd@chromium.org>,
	Peter Rosin <peda@axentia.se>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	Stephen Boyd <stephen.boyd@linaro.org>
Subject: RE: [PATCH v2] usb: chipidea: Hook into mux framework to toggle usb switch
Date: Fri, 20 Apr 2018 02:00:08 +0000	[thread overview]
Message-ID: <HE1PR04MB14504981D8B409CD8F9E7B7D8BB40@HE1PR04MB1450.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <1523973148-2094-1-git-send-email-yossim@codeaurora.org>

 
 
> --- a/drivers/usb/chipidea/Kconfig
> +++ b/drivers/usb/chipidea/Kconfig
> @@ -3,6 +3,8 @@ config USB_CHIPIDEA
>  	depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD
> && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA
>  	select EXTCON
>  	select RESET_CONTROLLER
> +	select MULTIPLEXER
> +	select MUX_GPIO

The above two configurations are only used at your specific platforms, please add
them at either your platform defconfig or the related hardware driver's Kconfig. 

>  	help
>  	  Say Y here if your system has a dual role high speed USB
>  	  controller based on ChipIdea silicon IP. It supports:
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index
> 33ae87f..8fa0991 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -61,6 +61,7 @@
>  #include <linux/of.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/usb/ehci_def.h>
> +#include <linux/mux/consumer.h>
> 
>  #include "ci.h"
>  #include "udc.h"
> @@ -687,6 +688,10 @@ static int ci_get_platdata(struct device *dev,
>  	if (of_find_property(dev->of_node, "non-zero-ttctrl-ttha", NULL))
>  		platdata->flags |= CI_HDRC_SET_NON_ZERO_TTHA;
> 
> +	platdata->usb_switch = devm_mux_control_get_optional(dev, "usb_switch");
> +	if (IS_ERR(platdata->usb_switch))
> +		return PTR_ERR(platdata->usb_switch);
> +
>  	ext_id = ERR_PTR(-ENODEV);
>  	ext_vbus = ERR_PTR(-ENODEV);
>  	if (of_property_read_bool(dev->of_node, "extcon")) { diff --git
> a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index af45aa32..d9d2d00
> 100644
> --- a/drivers/usb/chipidea/host.c
> +++ b/drivers/usb/chipidea/host.c
> @@ -13,6 +13,7 @@
>  #include <linux/usb/hcd.h>
>  #include <linux/usb/chipidea.h>
>  #include <linux/regulator/consumer.h>
> +#include <linux/mux/consumer.h>
> 
>  #include "../host/ehci.h"
> 
> @@ -161,6 +162,10 @@ static int host_start(struct ci_hdrc *ci)
>  		if (ci_otg_is_fsm_mode(ci)) {
>  			otg->host = &hcd->self;
>  			hcd->self.otg_port = 1;
> +		} else {
> +			ret = mux_control_select(ci->platdata->usb_switch, 1);
> +			if (ret)
> +				goto disable_reg;

What will happen if ci->platdata->usb_switch  is NULL?

>  		}
>  	}
> 
> @@ -181,6 +186,8 @@ static void host_stop(struct ci_hdrc *ci)
>  	struct usb_hcd *hcd = ci->hcd;
> 
>  	if (hcd) {
> +		if (!ci_otg_is_fsm_mode(ci))
> +			mux_control_deselect(ci->platdata->usb_switch);

Ditto.

>  		if (ci->platdata->notify_event)
>  			ci->platdata->notify_event(ci,
>  				CI_HDRC_CONTROLLER_STOPPED_EVENT);
> diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index
> 9852ec5..209d3f6 100644
> --- a/drivers/usb/chipidea/udc.c
> +++ b/drivers/usb/chipidea/udc.c
> @@ -19,6 +19,7 @@
>  #include <linux/usb/gadget.h>
>  #include <linux/usb/otg-fsm.h>
>  #include <linux/usb/chipidea.h>
> +#include <linux/mux/consumer.h>
> 
>  #include "ci.h"
>  #include "udc.h"
> @@ -1965,16 +1966,26 @@ void ci_hdrc_gadget_destroy(struct ci_hdrc *ci)
> 
>  static int udc_id_switch_for_device(struct ci_hdrc *ci)  {
> +	int ret = 0;
> +
>  	if (ci->is_otg)
>  		/* Clear and enable BSV irq */
>  		hw_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE,
>  					OTGSC_BSVIS | OTGSC_BSVIE);
> 
> -	return 0;
> +	if (!ci_otg_is_fsm_mode(ci))
> +		ret = mux_control_select(ci->platdata->usb_switch, 0);
> +

Ditto

> +	if (ci->is_otg && ret)
> +		hw_write_otgsc(ci, OTGSC_BSVIE | OTGSC_BSVIS,
> OTGSC_BSVIS);
> +
> +	return ret;
>  }
> 
>  static void udc_id_switch_for_host(struct ci_hdrc *ci)  {
> +	mux_control_deselect(ci->platdata->usb_switch);
> +
>  	/*
>  	 * host doesn't care B_SESSION_VALID event
>  	 * so clear and disbale BSV irq
> diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index
> 07f9936..9ea55a1 100644
> --- a/include/linux/usb/chipidea.h
> +++ b/include/linux/usb/chipidea.h
> @@ -10,6 +10,7 @@
>  #include <linux/usb/otg.h>
> 
>  struct ci_hdrc;
> +struct mux_control;
> 
>  /**
>   * struct ci_hdrc_cable - structure for external connector cable state tracking @@ -
> 76,6 +77,7 @@ struct ci_hdrc_platform_data {
>  	/* VBUS and ID signal state tracking, using extcon framework */
>  	struct ci_hdrc_cable		vbus_extcon;
>  	struct ci_hdrc_cable		id_extcon;
> +	struct mux_control		*usb_switch;
>  	u32			phy_clkgate_delay_us;
 
If CONFIG_USB_CHIPIDEA_HOST is not defined, it may cause build error

Peter
 

  parent reply	other threads:[~2018-04-20  2:00 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-17 13:52 Yossi Mansharoff
2018-04-17 14:11 ` Peter Rosin
2018-04-18  5:48   ` yossim
2018-05-14  7:21     ` Peter Rosin
2018-04-20  2:00 ` Peter Chen [this message]
2018-04-20  7:30   ` Peter Rosin
2018-04-20  9:22     ` Peter Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=HE1PR04MB14504981D8B409CD8F9E7B7D8BB40@HE1PR04MB1450.eurprd04.prod.outlook.com \
    --to=peter.chen@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=peda@axentia.se \
    --cc=robh@kernel.org \
    --cc=stephen.boyd@linaro.org \
    --cc=swboyd@chromium.org \
    --cc=yossim@codeaurora.org \
    --subject='RE: [PATCH v2] usb: chipidea: Hook into mux framework to toggle usb switch' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).