LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH v5 0/6] Add new series Micron SPI NAND devices
@ 2020-02-28 15:03 shiva.linuxworks
  2020-02-28 15:03 ` [PATCH v5 1/6] mtd: spinand: micron: Generalize the OOB layout structure and function names shiva.linuxworks
                   ` (6 more replies)
  0 siblings, 7 replies; 9+ messages in thread
From: shiva.linuxworks @ 2020-02-28 15:03 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Frieder Schrempf, linux-mtd, linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

This patchset is for the new series of Micron SPI NAND devices, and the
following links are their datasheets.

M78A:
[1] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m78a_1gb_3v_nand_spi.pdf
[2] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m78a_1gb_1_8v_nand_spi.pdf

M79A:
[3] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m79a_2gb_1_8v_nand_spi.pdf
[4] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m79a_ddp_4gb_3v_nand_spi.pdf

M70A:
[5] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_4gb_3v_nand_spi.pdf
[6] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_4gb_1_8v_nand_spi.pdf
[7] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_ddp_8gb_3v_nand_spi.pdf
[8] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_ddp_8gb_1_8v_nand_spi.pdf

Changes since v4:
-----------------

1. Patch 2 is separated into two as per the comment by Boris.
2. Renamed MICRON_CFG_CONTI_READ into MICRON_CFG_CR.
3. Reworked die selection function as per the comment by Boris.

Changes since v3:
-----------------

1. Patch 3 and 4 reworked as follows
   - Patch 3 introducing the Continuous read feature
   - Patch 4 adding devices with the feature

Changes since v2:
-----------------

1. Patch commit messages have been modified.
2. Handled devices with Continuous Read feature with vendor specific flag.
3. Reworked die selection function as per the comment.

Changes since v1:
-----------------

1. The patch split into multiple patches.
2. Added comments for selecting the die.

Shivamurthy Shastri (6):
  mtd: spinand: micron: Generalize the OOB layout structure and function
    names
  mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD
  mtd: spinand: micron: Add new Micron SPI NAND devices
  mtd: spinand: micron: identify SPI NAND device with Continuous Read
    mode
  mtd: spinand: micron: Add M70A series Micron SPI NAND devices
  mtd: spinand: micron: Add new Micron SPI NAND devices with multiple
    dies

 drivers/mtd/nand/spi/micron.c | 150 ++++++++++++++++++++++++++++++----
 include/linux/mtd/spinand.h   |   1 +
 2 files changed, 137 insertions(+), 14 deletions(-)

-- 
2.17.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v5 1/6] mtd: spinand: micron: Generalize the OOB layout structure and function names
  2020-02-28 15:03 [PATCH v5 0/6] Add new series Micron SPI NAND devices shiva.linuxworks
@ 2020-02-28 15:03 ` shiva.linuxworks
  2020-02-28 15:03 ` [PATCH v5 2/6] mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD shiva.linuxworks
                   ` (5 subsequent siblings)
  6 siblings, 0 replies; 9+ messages in thread
From: shiva.linuxworks @ 2020-02-28 15:03 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Frieder Schrempf, linux-mtd, linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

In order to add new Micron SPI NAND devices, we generalized the OOB
layout structure and function names.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
 drivers/mtd/nand/spi/micron.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 7d7b1f7fcf71..c028d0d7e236 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -34,38 +34,38 @@ static SPINAND_OP_VARIANTS(update_cache_variants,
 		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
 		SPINAND_PROG_LOAD(false, 0, NULL, 0));
 
-static int mt29f2g01abagd_ooblayout_ecc(struct mtd_info *mtd, int section,
-					struct mtd_oob_region *region)
+static int micron_8_ooblayout_ecc(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *region)
 {
 	if (section)
 		return -ERANGE;
 
-	region->offset = 64;
-	region->length = 64;
+	region->offset = mtd->oobsize / 2;
+	region->length = mtd->oobsize / 2;
 
 	return 0;
 }
 
-static int mt29f2g01abagd_ooblayout_free(struct mtd_info *mtd, int section,
-					 struct mtd_oob_region *region)
+static int micron_8_ooblayout_free(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *region)
 {
 	if (section)
 		return -ERANGE;
 
 	/* Reserve 2 bytes for the BBM. */
 	region->offset = 2;
-	region->length = 62;
+	region->length = (mtd->oobsize / 2) - 2;
 
 	return 0;
 }
 
-static const struct mtd_ooblayout_ops mt29f2g01abagd_ooblayout = {
-	.ecc = mt29f2g01abagd_ooblayout_ecc,
-	.free = mt29f2g01abagd_ooblayout_free,
+static const struct mtd_ooblayout_ops micron_8_ooblayout = {
+	.ecc = micron_8_ooblayout_ecc,
+	.free = micron_8_ooblayout_free,
 };
 
-static int mt29f2g01abagd_ecc_get_status(struct spinand_device *spinand,
-					 u8 status)
+static int micron_8_ecc_get_status(struct spinand_device *spinand,
+				   u8 status)
 {
 	switch (status & MICRON_STATUS_ECC_MASK) {
 	case STATUS_ECC_NO_BITFLIPS:
@@ -98,8 +98,8 @@ static const struct spinand_info micron_spinand_table[] = {
 					      &write_cache_variants,
 					      &update_cache_variants),
 		     0,
-		     SPINAND_ECCINFO(&mt29f2g01abagd_ooblayout,
-				     mt29f2g01abagd_ecc_get_status)),
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
 };
 
 static int micron_spinand_detect(struct spinand_device *spinand)
-- 
2.17.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v5 2/6] mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD
  2020-02-28 15:03 [PATCH v5 0/6] Add new series Micron SPI NAND devices shiva.linuxworks
  2020-02-28 15:03 ` [PATCH v5 1/6] mtd: spinand: micron: Generalize the OOB layout structure and function names shiva.linuxworks
@ 2020-02-28 15:03 ` shiva.linuxworks
  2020-02-28 15:03 ` [PATCH v5 3/6] mtd: spinand: micron: Add new Micron SPI NAND devices shiva.linuxworks
                   ` (4 subsequent siblings)
  6 siblings, 0 replies; 9+ messages in thread
From: shiva.linuxworks @ 2020-02-28 15:03 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Frieder Schrempf, linux-mtd, linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

Add the SPI NAND device MT29F2G01ABAGD series number, size and voltage
details as a comment.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
---
 drivers/mtd/nand/spi/micron.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index c028d0d7e236..e4aeafc56f4e 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -91,6 +91,7 @@ static int micron_8_ecc_get_status(struct spinand_device *spinand,
 }
 
 static const struct spinand_info micron_spinand_table[] = {
+	/* M79A 2Gb 3.3V */
 	SPINAND_INFO("MT29F2G01ABAGD", 0x24,
 		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
 		     NAND_ECCREQ(8, 512),
-- 
2.17.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v5 3/6] mtd: spinand: micron: Add new Micron SPI NAND devices
  2020-02-28 15:03 [PATCH v5 0/6] Add new series Micron SPI NAND devices shiva.linuxworks
  2020-02-28 15:03 ` [PATCH v5 1/6] mtd: spinand: micron: Generalize the OOB layout structure and function names shiva.linuxworks
  2020-02-28 15:03 ` [PATCH v5 2/6] mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD shiva.linuxworks
@ 2020-02-28 15:03 ` shiva.linuxworks
  2020-02-28 15:03 ` [PATCH v5 4/6] mtd: spinand: micron: identify SPI NAND device with Continuous Read mode shiva.linuxworks
                   ` (3 subsequent siblings)
  6 siblings, 0 replies; 9+ messages in thread
From: shiva.linuxworks @ 2020-02-28 15:03 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Frieder Schrempf, linux-mtd, linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

Add device table for M79A and M78A series Micron SPI NAND devices.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
---
 drivers/mtd/nand/spi/micron.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index e4aeafc56f4e..5fd1f921ef12 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -101,6 +101,36 @@ static const struct spinand_info micron_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&micron_8_ooblayout,
 				     micron_8_ecc_get_status)),
+	/* M79A 2Gb 1.8V */
+	SPINAND_INFO("MT29F2G01ABBGD", 0x25,
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
+	/* M78A 1Gb 3.3V */
+	SPINAND_INFO("MT29F1G01ABAFD", 0x14,
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
+	/* M78A 1Gb 1.8V */
+	SPINAND_INFO("MT29F1G01ABAFD", 0x15,
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
 };
 
 static int micron_spinand_detect(struct spinand_device *spinand)
-- 
2.17.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v5 4/6] mtd: spinand: micron: identify SPI NAND device with Continuous Read mode
  2020-02-28 15:03 [PATCH v5 0/6] Add new series Micron SPI NAND devices shiva.linuxworks
                   ` (2 preceding siblings ...)
  2020-02-28 15:03 ` [PATCH v5 3/6] mtd: spinand: micron: Add new Micron SPI NAND devices shiva.linuxworks
@ 2020-02-28 15:03 ` shiva.linuxworks
  2020-02-28 15:03 ` [PATCH v5 5/6] mtd: spinand: micron: Add M70A series Micron SPI NAND devices shiva.linuxworks
                   ` (2 subsequent siblings)
  6 siblings, 0 replies; 9+ messages in thread
From: shiva.linuxworks @ 2020-02-28 15:03 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Frieder Schrempf, linux-mtd, linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

Add SPINAND_HAS_CR_FEAT_BIT flag to identify the SPI NAND device with
the Continuous Read mode.

Some of the Micron SPI NAND devices have the "Continuous Read" feature
enabled by default, which does not fit the subsystem needs.

In this mode, the READ CACHE command doesn't require the starting column
address. The device always output the data starting from the first
column of the cache register, and once the end of the cache register
reached, the data output continues through the next page. With the
continuous read mode, it is possible to read out the entire block using
a single READ command, and once the end of the block reached, the output
pins become High-Z state. However, during this mode the read command
doesn't output the OOB area.

Hence, we disable the feature at probe time.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
---
 drivers/mtd/nand/spi/micron.c | 16 ++++++++++++++++
 include/linux/mtd/spinand.h   |  1 +
 2 files changed, 17 insertions(+)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 5fd1f921ef12..ff0a3c01441d 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -18,6 +18,8 @@
 #define MICRON_STATUS_ECC_4TO6_BITFLIPS	(3 << 4)
 #define MICRON_STATUS_ECC_7TO8_BITFLIPS	(5 << 4)
 
+#define MICRON_CFG_CR			BIT(0)
+
 static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -153,8 +155,22 @@ static int micron_spinand_detect(struct spinand_device *spinand)
 	return 1;
 }
 
+static int micron_spinand_init(struct spinand_device *spinand)
+{
+	/*
+	 * M70A device series enable Continuous Read feature at Power-up,
+	 * which is not supported. Disable this bit to avoid any possible
+	 * failure.
+	 */
+	if (spinand->flags & SPINAND_HAS_CR_FEAT_BIT)
+		return spinand_upd_cfg(spinand, MICRON_CFG_CR, 0);
+
+	return 0;
+}
+
 static const struct spinand_manufacturer_ops micron_spinand_manuf_ops = {
 	.detect = micron_spinand_detect,
+	.init = micron_spinand_init,
 };
 
 const struct spinand_manufacturer micron_spinand_manufacturer = {
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 4ea558bd3c46..333149b2855f 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -270,6 +270,7 @@ struct spinand_ecc_info {
 };
 
 #define SPINAND_HAS_QE_BIT		BIT(0)
+#define SPINAND_HAS_CR_FEAT_BIT		BIT(1)
 
 /**
  * struct spinand_info - Structure used to describe SPI NAND chips
-- 
2.17.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v5 5/6] mtd: spinand: micron: Add M70A series Micron SPI NAND devices
  2020-02-28 15:03 [PATCH v5 0/6] Add new series Micron SPI NAND devices shiva.linuxworks
                   ` (3 preceding siblings ...)
  2020-02-28 15:03 ` [PATCH v5 4/6] mtd: spinand: micron: identify SPI NAND device with Continuous Read mode shiva.linuxworks
@ 2020-02-28 15:03 ` shiva.linuxworks
  2020-02-28 15:03 ` [PATCH v5 6/6] mtd: spinand: micron: Add new Micron SPI NAND devices with multiple dies shiva.linuxworks
  2020-03-09 10:32 ` [PATCH v5 0/6] Add new series Micron SPI NAND devices Miquel Raynal
  6 siblings, 0 replies; 9+ messages in thread
From: shiva.linuxworks @ 2020-02-28 15:03 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Frieder Schrempf, linux-mtd, linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

Add device table for M70A series Micron SPI NAND devices.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
 drivers/mtd/nand/spi/micron.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index ff0a3c01441d..9db1ab71fcae 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -133,6 +133,26 @@ static const struct spinand_info micron_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&micron_8_ooblayout,
 				     micron_8_ecc_get_status)),
+	/* M70A 4Gb 3.3V */
+	SPINAND_INFO("MT29F4G01ABAFD", 0x34,
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
+	/* M70A 4Gb 1.8V */
+	SPINAND_INFO("MT29F4G01ABBFD", 0x35,
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
 };
 
 static int micron_spinand_detect(struct spinand_device *spinand)
-- 
2.17.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v5 6/6] mtd: spinand: micron: Add new Micron SPI NAND devices with multiple dies
  2020-02-28 15:03 [PATCH v5 0/6] Add new series Micron SPI NAND devices shiva.linuxworks
                   ` (4 preceding siblings ...)
  2020-02-28 15:03 ` [PATCH v5 5/6] mtd: spinand: micron: Add M70A series Micron SPI NAND devices shiva.linuxworks
@ 2020-02-28 15:03 ` shiva.linuxworks
  2020-03-09 10:32 ` [PATCH v5 0/6] Add new series Micron SPI NAND devices Miquel Raynal
  6 siblings, 0 replies; 9+ messages in thread
From: shiva.linuxworks @ 2020-02-28 15:03 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Frieder Schrempf, linux-mtd, linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

Add device table for new Micron SPI NAND devices, which have multiple
dies.

Also, enable support to select the dies.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
---
 drivers/mtd/nand/spi/micron.c | 55 +++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 9db1ab71fcae..f7d148aaa476 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -20,6 +20,14 @@
 
 #define MICRON_CFG_CR			BIT(0)
 
+/*
+ * As per datasheet, die selection is done by the 6th bit of Die
+ * Select Register (Address 0xD0).
+ */
+#define MICRON_DIE_SELECT_REG	0xD0
+
+#define MICRON_SELECT_DIE(x)	((x) << 6)
+
 static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -66,6 +74,20 @@ static const struct mtd_ooblayout_ops micron_8_ooblayout = {
 	.free = micron_8_ooblayout_free,
 };
 
+static int micron_select_target(struct spinand_device *spinand,
+				unsigned int target)
+{
+	struct spi_mem_op op = SPINAND_SET_FEATURE_OP(MICRON_DIE_SELECT_REG,
+						      spinand->scratchbuf);
+
+	if (target > 1)
+		return -EINVAL;
+
+	*spinand->scratchbuf = MICRON_SELECT_DIE(target);
+
+	return spi_mem_exec_op(spinand->spimem, &op);
+}
+
 static int micron_8_ecc_get_status(struct spinand_device *spinand,
 				   u8 status)
 {
@@ -133,6 +155,17 @@ static const struct spinand_info micron_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&micron_8_ooblayout,
 				     micron_8_ecc_get_status)),
+	/* M79A 4Gb 3.3V */
+	SPINAND_INFO("MT29F4G01ADAGD", 0x36,
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 80, 2, 1, 2),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status),
+		     SPINAND_SELECT_TARGET(micron_select_target)),
 	/* M70A 4Gb 3.3V */
 	SPINAND_INFO("MT29F4G01ABAFD", 0x34,
 		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
@@ -153,6 +186,28 @@ static const struct spinand_info micron_spinand_table[] = {
 		     SPINAND_HAS_CR_FEAT_BIT,
 		     SPINAND_ECCINFO(&micron_8_ooblayout,
 				     micron_8_ecc_get_status)),
+	/* M70A 8Gb 3.3V */
+	SPINAND_INFO("MT29F8G01ADAFD", 0x46,
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 2),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status),
+		     SPINAND_SELECT_TARGET(micron_select_target)),
+	/* M70A 8Gb 1.8V */
+	SPINAND_INFO("MT29F8G01ADBFD", 0x47,
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 2),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status),
+		     SPINAND_SELECT_TARGET(micron_select_target)),
 };
 
 static int micron_spinand_detect(struct spinand_device *spinand)
-- 
2.17.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v5 0/6] Add new series Micron SPI NAND devices
  2020-02-28 15:03 [PATCH v5 0/6] Add new series Micron SPI NAND devices shiva.linuxworks
                   ` (5 preceding siblings ...)
  2020-02-28 15:03 ` [PATCH v5 6/6] mtd: spinand: micron: Add new Micron SPI NAND devices with multiple dies shiva.linuxworks
@ 2020-03-09 10:32 ` Miquel Raynal
  2020-03-09 10:35   ` [EXT] " Shivamurthy Shastri (sshivamurthy)
  6 siblings, 1 reply; 9+ messages in thread
From: Miquel Raynal @ 2020-03-09 10:32 UTC (permalink / raw)
  To: shiva.linuxworks
  Cc: Richard Weinberger, Vignesh Raghavendra, Boris Brezillon,
	Frieder Schrempf, linux-mtd, linux-kernel, Shivamurthy Shastri

Hi Shiva,

shiva.linuxworks@gmail.com wrote on Fri, 28 Feb 2020 16:03:05 +0100:

> From: Shivamurthy Shastri <sshivamurthy@micron.com>
> 
> This patchset is for the new series of Micron SPI NAND devices, and the
> following links are their datasheets.
> 
> M78A:
> [1] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m78a_1gb_3v_nand_spi.pdf
> [2] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m78a_1gb_1_8v_nand_spi.pdf
> 
> M79A:
> [3] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m79a_2gb_1_8v_nand_spi.pdf
> [4] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m79a_ddp_4gb_3v_nand_spi.pdf
> 
> M70A:
> [5] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_4gb_3v_nand_spi.pdf
> [6] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_4gb_1_8v_nand_spi.pdf
> [7] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_ddp_8gb_3v_nand_spi.pdf
> [8] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_ddp_8gb_1_8v_nand_spi.pdf
> 
> Changes since v4:
> -----------------
> 
> 1. Patch 2 is separated into two as per the comment by Boris.
> 2. Renamed MICRON_CFG_CONTI_READ into MICRON_CFG_CR.
> 3. Reworked die selection function as per the comment by Boris.

I was about to apply this series but unfortunately it is not based on
v5.6-rc1 so no patch applies correctly. Can you please rebase and send
a v6 soon?

Thanks,
Miquèl

^ permalink raw reply	[flat|nested] 9+ messages in thread

* RE: [EXT] Re: [PATCH v5 0/6] Add new series Micron SPI NAND devices
  2020-03-09 10:32 ` [PATCH v5 0/6] Add new series Micron SPI NAND devices Miquel Raynal
@ 2020-03-09 10:35   ` Shivamurthy Shastri (sshivamurthy)
  0 siblings, 0 replies; 9+ messages in thread
From: Shivamurthy Shastri (sshivamurthy) @ 2020-03-09 10:35 UTC (permalink / raw)
  To: Miquel Raynal, shiva.linuxworks
  Cc: Richard Weinberger, Vignesh Raghavendra, Boris Brezillon,
	Frieder Schrempf, linux-mtd, linux-kernel

Hi Miquel,

> 
> Hi Shiva,
> 
> shiva.linuxworks@gmail.com wrote on Fri, 28 Feb 2020 16:03:05 +0100:
> 
> > From: Shivamurthy Shastri <sshivamurthy@micron.com>
> >
> > This patchset is for the new series of Micron SPI NAND devices, and the
> > following links are their datasheets.
> >
> > M78A:
> > [1] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m78a_1gb_3v_nand_spi.pdf
> > [2] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m78a_1gb_1_8v_nand_spi.pdf
> >
> > M79A:
> > [3] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m79a_2gb_1_8v_nand_spi.pdf
> > [4] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m79a_ddp_4gb_3v_nand_spi.pdf
> >
> > M70A:
> > [5] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m70a_4gb_3v_nand_spi.pdf
> > [6] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m70a_4gb_1_8v_nand_spi.pdf
> > [7] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m70a_ddp_8gb_3v_nand_spi.pdf
> > [8] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m70a_ddp_8gb_1_8v_nand_spi.pdf
> >
> > Changes since v4:
> > -----------------
> >
> > 1. Patch 2 is separated into two as per the comment by Boris.
> > 2. Renamed MICRON_CFG_CONTI_READ into MICRON_CFG_CR.
> > 3. Reworked die selection function as per the comment by Boris.
> 
> I was about to apply this series but unfortunately it is not based on
> v5.6-rc1 so no patch applies correctly. Can you please rebase and send
> a v6 soon?

Sure, I will do it.

Thanks,
Shiva

> 
> Thanks,
> Miquèl

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2020-03-09 10:35 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-28 15:03 [PATCH v5 0/6] Add new series Micron SPI NAND devices shiva.linuxworks
2020-02-28 15:03 ` [PATCH v5 1/6] mtd: spinand: micron: Generalize the OOB layout structure and function names shiva.linuxworks
2020-02-28 15:03 ` [PATCH v5 2/6] mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD shiva.linuxworks
2020-02-28 15:03 ` [PATCH v5 3/6] mtd: spinand: micron: Add new Micron SPI NAND devices shiva.linuxworks
2020-02-28 15:03 ` [PATCH v5 4/6] mtd: spinand: micron: identify SPI NAND device with Continuous Read mode shiva.linuxworks
2020-02-28 15:03 ` [PATCH v5 5/6] mtd: spinand: micron: Add M70A series Micron SPI NAND devices shiva.linuxworks
2020-02-28 15:03 ` [PATCH v5 6/6] mtd: spinand: micron: Add new Micron SPI NAND devices with multiple dies shiva.linuxworks
2020-03-09 10:32 ` [PATCH v5 0/6] Add new series Micron SPI NAND devices Miquel Raynal
2020-03-09 10:35   ` [EXT] " Shivamurthy Shastri (sshivamurthy)

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).