LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Naga Sureshkumar Relli <nagasure@xilinx.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: "boris.brezillon@bootlin.com" <boris.brezillon@bootlin.com>,
	"richard@nod.at" <richard@nod.at>,
	"wmw2@infradead.org" <wmw2@infradead.org>,
	"computersforpeace@gmail.com" <computersforpeace@gmail.com>,
	"marek.vasut@gmail.com" <marek.vasut@gmail.com>,
	"f.fainelli@gmail.com" <f.fainelli@gmail.com>,
	"mmayer@broadcom.com" <mmayer@broadcom.com>,
	"rogerq@ti.com" <rogerq@ti.com>,
	"ladis@linux-mips.org" <ladis@linux-mips.org>,
	"ada@thorsis.com" <ada@thorsis.com>,
	"honghui.zhang@mediatek.com" <honghui.zhang@mediatek.com>,
	"linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"nagasureshkumarrelli@gmail.com" <nagasureshkumarrelli@gmail.com>
Subject: RE: [LINUX PATCH v9 1/4] Devicetree: Add pl353 smc controller devicetree binding information
Date: Fri, 8 Jun 2018 05:20:33 +0000	[thread overview]
Message-ID: <MWHPR02MB2623AA49F71D3D24B997C682AF7B0@MWHPR02MB2623.namprd02.prod.outlook.com> (raw)
In-Reply-To: <20180607174203.035f187d@xps13>

Hi Miquel,

Thanks for the review.

> -----Original Message-----
> From: Miquel Raynal [mailto:miquel.raynal@bootlin.com]
> Sent: Thursday, June 7, 2018 9:12 PM
> To: Naga Sureshkumar Relli <nagasure@xilinx.com>
> Cc: boris.brezillon@bootlin.com; richard@nod.at; wmw2@infradead.org;
> computersforpeace@gmail.com; marek.vasut@gmail.com; f.fainelli@gmail.com;
> mmayer@broadcom.com; rogerq@ti.com; ladis@linux-mips.org; ada@thorsis.com;
> honghui.zhang@mediatek.com; linux-mtd@lists.infradead.org; linux-kernel@vger.kernel.org;
> nagasureshkumarrelli@gmail.com
> Subject: Re: [LINUX PATCH v9 1/4] Devicetree: Add pl353 smc controller devicetree
> binding information
> 
> Hi Naga,
> 
> On Wed, 6 Jun 2018 13:19:39 +0530, Naga Sureshkumar Relli
> <naga.sureshkumar.relli@xilinx.com> wrote:
> 
> > Add pl353 static memory controller devicetree binding information.
> >
> > Signed-off-by: Naga Sureshkumar Relli
> > <naga.sureshkumar.relli@xilinx.com>
> > ---
> > Changes in v9:
> >  - Addressed commens given by Randy Dunlap and Miquel Raynal
> 
> Can you please be more specific in your next changelog? I don't remember what I suggested a
> few months ago :)
Ok, I will update.

> 
> > Changes in v8:
> >  - None
> > Changes in v7:
> > - Corrected clocks description
> > - prefixed '#' for address and size cells Changes in v6:
> >  - None
> > Changes in v5:
> >  - Removed timing properties
> > Changes in v4:
> >  - none
> > Changes in v3:
> >  - none
> > Changes in v2:
> >  - modified timing binding info as per onfi timing parameters
> >  - add suffix nano second as timing unit
> >  - modified the clock names as per the IP spec
> > ---
> >  .../bindings/memory-controllers/pl353-smc.txt      | 53
> ++++++++++++++++++++++
> >  1 file changed, 53 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
> >
> > diff --git
> > a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
> > b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
> > new file mode 100644
> > index 0000000..551e66b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.t
> > +++ xt
> > @@ -0,0 +1,53 @@
> > +Device tree bindings for ARM PL353 static memory controller
> > +
> > +PL353 static memory controller supports two kinds of memory
> > +interfaces.i.e NAND and SRAM/NOR interfaces.
> > +The actual devices are instantiated from the child nodes of pl353 smc node.
> > +
> > +Required properties:
> > +- compatible		: Should be "arm,pl353-smc-r2p1"
> 
> I thing Rob prefers:
> 
> - compatible: Must be one of:
>   * arm, pl353-smc-r2p1
Are you suggesting any other compatibles?
Or just a change from "should be to Must be one of"?
> 
> > +- reg			: Controller registers map and length.
> > +- clock-names		: List of input clock names - "ref_clk", "aper_clk"
> > +			  (See clock bindings for details).
> > +- clocks		: Clock phandles (see clock bindings for details).
> > +- address-cells		: Address cells, must be 1.
> > +- size-cells		: Size cells. Must be 1.
> 
> Please avoid padding, just this is enough:
> 
> - something: And another thing.
Ok, I will update it.

> 
> > +
> > +Child nodes:
> > + For NAND the "arm,pl353-nand-r2p1" and for NOR the "cfi-flash"
> > +drivers are supported as child nodes.
> > +
> > +Mandatory timing properties for child nodes:
> > +- arm,nand-cycle-t0	: Read cycle time(t_rc).
> > +- arm,nand-cycle-t1	: Write cycle time(t_wc).
> > +- arm,nand-cycle-t2	: re_n assertion delay(t_rea).
> > +- arm,nand-cycle-t3	: we_n de-assertion delay(t_wp).
> > +- arm,nand-cycle-t4	: Status read time(t_clr)
> > +- arm,nand-cycle-t5	: ID read time(t_ar)
> > +- arm,nand-cycle-t6	: busy to re_n(t_rr)
> 
> I think this has nothing to do in the DT, you should handle timings from the -
> >setup_data_interface() hook. If you need, you may use different compatibles to distinguish
> different platform data.
> 
This controller is applicable only to Zynq platform. No other platform will use this.
Basically pl353-smc.c and pl353-nand.c, both are different drivers.
And this data_interface hook is in nand, and to set this timings if we read it from setup_data_interface(), then
We need to make call from nand to smc driver.
Let me try this.

> > +
> > +for nand partition information please refer the below file
> 
> s/nand/NAND/
I will update in next version.

> 
> > +Documentation/devicetree/bindings/mtd/partition.txt
> > +
> > +Example:
> > +	pl353smcc_0: pl353smcc@e000e000 {
> 
> Why not something more explicit with the '-flash-controller' suffix?
Is this ok?
smcc: memory-controller@e000e000 {}

> 
> > +			compatible = "arm,pl353-smc-r2p1"
> > +			clock-names = "memclk", "aclk";
> > +			clocks = <&clkc 11>, <&clkc 44>;
> > +			reg = <0xe000e000 0x1000>;
> > +			#address-cells = <1>;
> > +			#size-cells = <1>;
> > +			ranges;
> > +			nand_0: nand@e1000000 {
> > +				compatible = "arm,pl353-nand-r2p1"
> 
> NAND chips do not have their own compatible.
As I said above, SMCC controller has two interface(NAND, NOR/SRAM).
So to differentiate which interface is selected, we added the compatible.
The dts node looks below.
smcc: memory-controller@e000e000 {
			#address-cells = <1>;
			#size-cells = <1>;
			clock-names = "memclk", "aclk";
			clocks = <&clkc 11>, <&clkc 44>;
			compatible = "arm,pl353-smc-r2p1";
			interrupt-parent = <&intc>;
			interrupts = <0 18 4>;
			ranges ;
			reg = <0xe000e000 0x1000>;
			nand0: flash@e1000000 {
				compatible = "arm,pl353-nand-r2p1";
				reg = <0xe1000000 0x1000000>;
				#address-cells = <0x1>;
				#size-cells = <0x1>;
			};
			nor0: flash@e2000000 {
				compatible = "cfi-flash";
				reg = <0xe2000000 0x2000000>;
				#address-cells = <1>;
				#size-cells = <1>;
			};
		};
> 
> > +				reg = <0xe1000000 0x1000000>;
> > +				arm,nand-cycle-t0 = <0x4>;
> > +				arm,nand-cycle-t1 = <0x4>;
> > +				arm,nand-cycle-t2 = <0x1>;
> > +				arm,nand-cycle-t3 = <0x2>;
> > +				arm,nand-cycle-t4 = <0x2>;
> > +				arm,nand-cycle-t5 = <0x2>;
> > +				arm,nand-cycle-t6 = <0x4>;
> > +				(...)
> > +			};
> > +	};
> 
> 
> Thanks,
> Miquèl

Thanks,
Naga Sureshkumar Relli.

  parent reply	other threads:[~2018-06-08  5:20 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-06  7:49 [LINUX PATCH v9 0/4] Add arm pl353 smc memory and nand driver for xilinx zynq soc Naga Sureshkumar Relli
2018-06-06  7:49 ` [LINUX PATCH v9 1/4] Devicetree: Add pl353 smc controller devicetree binding information Naga Sureshkumar Relli
2018-06-07 15:42   ` Miquel Raynal
2018-06-07 15:47     ` Miquel Raynal
2018-06-08  5:20     ` Naga Sureshkumar Relli [this message]
2018-06-08  5:51       ` Boris Brezillon
2018-06-08  8:01         ` Naga Sureshkumar Relli
2018-06-08  7:23       ` Miquel Raynal
2018-06-06  7:49 ` [LINUX PATCH v9 2/4] memory: pl353: Add driver for arm pl353 static memory controller Naga Sureshkumar Relli
2018-06-07 16:07   ` Miquel Raynal
2018-06-19 10:54     ` Naga Sureshkumar Relli
2018-06-06  7:49 ` [LINUX PATCH v9 3/4] Documentation: nand: pl353: Add documentation for controller and driver Naga Sureshkumar Relli
2018-06-06  7:49 ` [LINUX PATCH v9 4/4] mtd: rawnand: pl353: Add basic driver for arm pl353 smc nand interface Naga Sureshkumar Relli
2018-06-07 19:59   ` Miquel Raynal
2018-06-08 12:23     ` Naga Sureshkumar Relli
2018-06-08 12:35       ` Miquel Raynal
2018-06-08 13:08         ` Naga Sureshkumar Relli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=MWHPR02MB2623AA49F71D3D24B997C682AF7B0@MWHPR02MB2623.namprd02.prod.outlook.com \
    --to=nagasure@xilinx.com \
    --cc=ada@thorsis.com \
    --cc=boris.brezillon@bootlin.com \
    --cc=computersforpeace@gmail.com \
    --cc=f.fainelli@gmail.com \
    --cc=honghui.zhang@mediatek.com \
    --cc=ladis@linux-mips.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=mmayer@broadcom.com \
    --cc=nagasureshkumarrelli@gmail.com \
    --cc=richard@nod.at \
    --cc=rogerq@ti.com \
    --cc=wmw2@infradead.org \
    --subject='RE: [LINUX PATCH v9 1/4] Devicetree: Add pl353 smc controller devicetree binding information' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).