Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings

[masonccyang@mxic.com.tw]

Hi Geert,

> 
> On Mon, May 20, 2019 at 9:24 AM <masonccyang@mxic.com.tw> wrote:
> > > >>>   - clocks: should contain 1 entries for the module's clock
> > > >>>   - clock-names: should contain "rpc"
> > > >>
> > > >>    I suspect we'd need the RPC/RPCD2 clocks mentioned as well 
(not
> > sure
> > > > yet)...
> > > >
> > > > Need it ?
> > >
> > >    You seem to call clk_get_rate() on the module clock, I doubt 
that's
> > > correct topologically...
> >
> > I think it's correct but just like Geert mentioned that there is no 
any
> > patch
> > in drivers/clk/renesas/r8a77995-cpg-mssr.c adding RPC-related clocks.
> >
> >
> > I patched dt-bindings/clock/r8a77995-cpg-mssr.h for some simple 
testing
> >
> > -#define R8A77995_CLK_RPC               29
> > -#define R8A77995_CLK_RPCD2             30
> > +#define R8A77995_CLK_RPC               31
> > +#define R8A77995_CLK_RPCD2             32
> 
> That change doesn't make sense to me...
> 
> > by clk_prepare_enable() & clk_disable_unprepare() with CPG_MOD 917
> > on D3 draak board, it is working fine.
> 
> ... and is not sufficient to allow the above two calls.
> 
> Besides, making explicit clk_prepare_enable() calls bypasses Runtime PM
> and the automatic disabling of unused clocks, thus hiding bugs related 
to
> Runtime PM.  Which is probably why your driver doesn't work for 
Sergei...
> 

Got it, thanks for your explanation.

best regards,
Mason


CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information 
and/or personal data, which is protected by applicable laws. Please be 
reminded that duplication, disclosure, distribution, or use of this e-mail 
(and/or its attachments) or any part thereof is prohibited. If you receive 
this e-mail in error, please notify us immediately and delete this mail as 
well as its attachment(s) from your system. In addition, please be 
informed that collection, processing, and/or use of personal data is 
prohibited unless expressly permitted by personal data protection laws. 
Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================



============================================================================

CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================