LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* PROBLEM: SMP kernel freeze on e1000+ipx+ncp complex
@ 2004-05-19 20:18 Andrew Shirrayev
0 siblings, 0 replies; 2+ messages in thread
From: Andrew Shirrayev @ 2004-05-19 20:18 UTC (permalink / raw)
To: linux-kernel
<<< No Message Collected >>>
^ permalink raw reply [flat|nested] 2+ messages in thread
* PROBLEM: SMP kernel freeze on e1000,ipx,ncp complex
@ 2004-05-20 0:00 Andrew Shirrayev
0 siblings, 0 replies; 2+ messages in thread
From: Andrew Shirrayev @ 2004-05-20 0:00 UTC (permalink / raw)
To: linux-kernel
1. SMP kernel freeze on e1000+ipx+ncp complex
2. see 6.
Problem on Dual P4 Xeon 2.4GHz with or w/o HT.
with two on-board e1000 NIC.
On 8139too NIC problem not found.
3. e1000, ipx, ncpfs, smp
4. Linux version 2.4.26smp.1.1 (root@gate-n) (gcc version 3.3.3 (Debian
20040401)) #1 SMP Mon May 17 12:20:12 MSD 2004
5. --
6. In start-up scripts add runing /bin/bash,
after mount all local FS and reboot.
After bash prompt:
#disconnect LAN cable from e1000
#loading e1000.o for eth0ð1 (dual e1000 on-board)
ip link set eth0 up
#configure ipx 222 - any random number (network don't connect)
ipx_interface add -p eth0 802.2 222
# Try ncpmount two times server, user and mount point
# not important. Error message of userspace program ignore...
#
ncpmount -S serv -U user -n /mnt
# don't wait, running
ncpmount -S serv -U user -n /mnt
#insert cable to eth0 port:
#Get message from kernel
"e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex"
And stop working... Only <reset> work.
W/o inserting cable kernel freeze by command
ip link set eth0 down
7.
7.1
Linux gate-n 2.4.26smp.1.1 #1 SMP Mon May 17 12:20:12 MSD 2004 i686 GNU/Linux
Gnu C 3.3.3
Gnu make 3.80
binutils 2.14.90.0.7
util-linux 2.12
mount 2.12
modutils 2.4.26
e2fsprogs 1.35
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.2.1
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.0.91
Modules Loaded ncpfs ipx e1000 lvm-mod dm-mod unix
7.2
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Xeon(TM) CPU 2.40GHz
stepping : 7
cpu MHz : 2400.206
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips : 4784.12
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Xeon(TM) CPU 2.40GHz
stepping : 7
cpu MHz : 2400.206
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips : 4797.23
7.3
ppp_deflate 3512 1 (autoclean)
zlib_deflate 18744 0 (autoclean) [ppp_deflate]
zlib_inflate 18660 0 (autoclean) [ppp_deflate]
bsd_comp 4376 0 (autoclean)
ppp_async 8096 1 (autoclean)
ppp_generic 18952 3 (autoclean) [ppp_deflate bsd_comp
ppp_async]
slhc 5248 0 (autoclean) [ppp_generic]
af_packet 10856 1 (autoclean)
rtc 7720 0 (autoclean)
nls_koi8-r 3836 6 (autoclean)
ncpfs 39292 3 (autoclean)
ipx 22116 10 (autoclean)
e1000 69156 2 (autoclean)
8139too 15144 1 (autoclean)
mii 2560 0 (autoclean) [8139too]
lvm-mod 59776 0 (unused)
dm-mod 30152 5
unix 17324 65 (autoclean)
7.4
cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
02f8-02ff : serial(set)
03c0-03df : vga+
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
b800-b8ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
b800-b8ff : 8139too
c000-c007 : US Robotics/3Com 56K FaxModem Model 5610
c000-c007 : serial(auto)
c400-c407 : US Robotics/3Com 56K FaxModem Model 5610 (#2)
c400-c407 : serial(auto)
c800-c83f : Intel Corp. 82540EM Gigabit Ethernet Controller
c800-c83f : e1000
d000-d03f : Intel Corp. 82540EM Gigabit Ethernet Controller (#2)
d000-d03f : e1000
d400-d4ff : Adaptec AIC-7902 U320
d800-d8ff : Adaptec AIC-7902 U320
e000-e0ff : Adaptec AIC-7902 U320 (#2)
e400-e4ff : Adaptec AIC-7902 U320 (#2)
e800-e8ff : ATI Technologies Inc Rage XL
ffa0-ffaf : ServerWorks CSB6 RAID/IDE Controller
cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000d0dff : Extension ROM
000f0000-000fffff : System ROM
00100000-3fffffff : System RAM
00100000-0027b663 : Kernel code
0027b664-00301a3f : Kernel data
fd000000-fdffffff : ATI Technologies Inc Rage XL
feb80000-feb9ffff : Intel Corp. 82540EM Gigabit Ethernet Controller
feb80000-feb9ffff : e1000
feba0000-febbffff : Intel Corp. 82540EM Gigabit Ethernet Controller (#2)
feba0000-febbffff : e1000
febfa000-febfbfff : Adaptec AIC-7902 U320
febfa000-febfafff : aic79xx
febfc000-febfdfff : Adaptec AIC-7902 U320 (#2)
febfc000-febfcfff : aic79xx
febfec00-febfecff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
febfec00-febfecff : 8139too
febff000-febfffff : ATI Technologies Inc Rage XL
fec00000-fec03fff : reserved
fee00000-fee00fff : reserved
fff80000-ffffffff : reserved
cat /proc/interrupts
CPU0 CPU1
0: 484892 0 IO-APIC-edge timer
1: 3 0 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
4: 5 0 IO-APIC-edge serial
8: 1 0 IO-APIC-edge rtc
12: 20 0 IO-APIC-edge PS/2 Mouse
20: 657182 0 IO-APIC-level eth0
22: 98745 0 IO-APIC-level serial
24: 203903 0 IO-APIC-level serial
26: 2404 0 IO-APIC-level eth1
28: 2404 0 IO-APIC-level eth2
30: 50928 0 IO-APIC-level aic79xx
31: 30 0 IO-APIC-level aic79xx
NMI: 0 0
LOC: 484854 484853
ERR: 0
MIS: 0
7.5
0000:00:00.0 Host bridge: ServerWorks GCNB-LE Host Bridge (rev 32)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:00.1 Host bridge: ServerWorks GCNB-LE Host Bridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Edimax Computer Co.: Unknown device 9503
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at b800 [size=256]
Region 1: Memory at febfec00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:06.0 Serial controller: 5610 56K FaxModem 56K FaxModem Model 5610 (rev 01) (prog-if 02 [16550])
Subsystem: 5610 56K FaxModem: Unknown device baba
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at c000 [size=8]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
0000:00:07.0 Serial controller: 5610 56K FaxModem 56K FaxModem Model 5610 (rev 01) (prog-if 02 [16550])
Subsystem: 5610 56K FaxModem: Unknown device baba
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 24
Region 0: I/O ports at c400 [size=8]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME+
0000:00:08.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02)
Subsystem: Intel Corp.: Unknown device 004e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (63750ns min), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 28
Region 0: Memory at feb80000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at c800 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device.
Command: DPERE- ERO+ RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=2, DMOST=0, DMCRS=1, RSCEM-
Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
0000:00:09.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02)
Subsystem: Intel Corp.: Unknown device 004e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (63750ns min), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 26
Region 0: Memory at feba0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d000 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device.
Command: DPERE- ERO+ RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=2, DMOST=0, DMCRS=1, RSCEM-
Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
0000:00:0a.0 SCSI storage controller: Adaptec AIC-7902 U320 (rev 03)
Subsystem: Adaptec: Unknown device 005f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 30
Region 0: I/O ports at d800 [disabled] [size=256]
Region 1: Memory at febfa000 (64-bit, non-prefetchable) [size=8K]
Region 3: I/O ports at d400 [disabled] [size=256]
Expansion ROM at fea80000 [disabled] [size=512K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a0] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [94] PCI-X non-bridge device.
Command: DPERE- ERO+ RBC=0 OST=4
Status: Bus=255 Dev=31 Func=0 64bit+ 133MHz+ SCD- USC-, DC=simple, DMMRBC=0, DMOST=4, DMCRS=1, RSCEM-
0000:00:0a.1 SCSI storage controller: Adaptec AIC-7902 U320 (rev 03)
Subsystem: Adaptec: Unknown device 005f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin B routed to IRQ 31
Region 0: I/O ports at e400 [disabled] [size=256]
Region 1: Memory at febfc000 (64-bit, non-prefetchable) [size=8K]
Region 3: I/O ports at e000 [disabled] [size=256]
Expansion ROM at feb00000 [disabled] [size=512K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a0] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [94] PCI-X non-bridge device.
Command: DPERE- ERO+ RBC=0 OST=4
Status: Bus=255 Dev=31 Func=1 64bit+ 133MHz+ SCD- USC-, DC=simple, DMMRBC=0, DMOST=4, DMCRS=1, RSCEM-
0000:00:0b.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage XL
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 29
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at e800 [size=256]
Region 2: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0f.0 Host bridge: ServerWorks CSB6 South Bridge (rev a0)
Subsystem: Super Micro Computer Inc: Unknown device 4155
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
0000:00:0f.1 IDE interface: ServerWorks CSB6 RAID/IDE Controller (rev a0) (prog-if 82 [Master PriP])
Subsystem: TEC Corporation: Unknown device 0212
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x08 (32 bytes)
Region 0: I/O ports at <ignored>
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at ffa0 [size=16]
0000:00:0f.3 ISA bridge: ServerWorks GCLE-2 Host Bridge
Subsystem: Super Micro Computer Inc: Unknown device 4155
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
7.6 SCSI information not need. Yes?
X.
e1000 very long time (>1 sec) detect cable on-line, and
if ncpmount try connect to server before "NIC Link is Up"
server hanged...
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-05-20 0:19 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-05-19 20:18 PROBLEM: SMP kernel freeze on e1000+ipx+ncp complex Andrew Shirrayev
2004-05-20 0:00 PROBLEM: SMP kernel freeze on e1000,ipx,ncp complex Andrew Shirrayev
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).