LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* Re: Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793
@ 2007-03-05 19:19 Amedee Van Gasse
  2007-03-05 21:54 ` Jiri Kosina
  2007-03-23  9:15 ` Jiri Kosina
  0 siblings, 2 replies; 15+ messages in thread
From: Amedee Van Gasse @ 2007-03-05 19:19 UTC (permalink / raw)
  To: LKML

[-- Attachment #1: Type: text/plain, Size: 3264 bytes --]

On Tue, 27 Feb 2007 16:54:27 +0100 (CET), Jiri Kosina <> wrote:
> 
> What puzzles me a bit is a fact that both the bugreporters seem to
> state pretty clearly that this started happening after some update, am
> I right?
> 
> Or did the hardware before work all the time in the HID mode, without
> even being attempted to switch to HCI (which seems to cause the bug)?

It _appears_ that the bug reports started after an update of
bluez-utils, but this remains to be confirmed. It could be
coincidence/temporal correlation (which does not imply causation).

As for myself, I have a Logitech MX5000 keyboard/mouse with usb dongle,
and I can confirm that the keyboard/mouse have always worked in HID.
But in HID mode, no other bluetooth functions are possible (like pairing
with a smartphone).
It's possible to switch from HID to HCI and have a working mouse
+bluetooth receiver, but in that case the keyboard can't pair.

I used this script to get functional bluetooth (and unresponsive
keyboard):

hid2hci --tohci
sleep 1
/etc/init.d/bluetooth restart
sleep 1
# connect with the mouse
hidd -i hci0 --connect 00:07:61:48:71:DE
# connect with the keyboard
hidd -i hci0 --connect 00:07:61:3F:DA:41

I think the "-i hci0" isn't even needed, but it can't hurt.

This triggers a lot of occurences of the following in my logs:

BUG: at drivers/hid/hid-core.c:785 implement()
 [<f8d59608>] hid_output_report+0x288/0x300 [hid]
 [<f8d7d4c8>] hid_submit_ctrl+0x58/0x200 [usbhid]
 [schedule_timeout+83/208] schedule_timeout+0x53/0xd0
 [finish_wait+45/112] finish_wait+0x2d/0x70
 [<f8d7d78b>] usbhid_submit_report+0x11b/0x1b0 [usbhid]
 [autoremove_wake_function+0/80] autoremove_wake_function+0x0/0x50
 [<f8d7f9d6>] hiddev_ioctl+0x446/0xb40 [usbhid]
 [filemap_nopage+753/928] filemap_nopage+0x2f1/0x3a0
 [kmap_atomic+134/160] kmap_atomic+0x86/0xa0
 [kunmap_atomic+107/112] kunmap_atomic+0x6b/0x70
 [__handle_mm_fault+633/2624] __handle_mm_fault+0x279/0xa40
 [nameidata_to_filp+53/64] nameidata_to_filp+0x35/0x40
 [do_ioctl+120/144] do_ioctl+0x78/0x90
 [vfs_ioctl+92/672] vfs_ioctl+0x5c/0x2a0
 [sys_ioctl+114/144] sys_ioctl+0x72/0x90
 [sysenter_past_esp+105/169] sysenter_past_esp+0x69/0xa9
 =======================

There are a few Ubuntu bug reports that describe the problem, with some
log files and other useful info:
https://bugs.launchpad.net/ubuntu/+source/bluez-utils/+bug/32415
https://launchpad.net/ubuntu/+source/bluez-utils/+bug/66884/
I have found similar descriptions in other distros.

I have exactly the same experience as Vincent Fortier described
(keyboard working at boot, some keys repeating sometimes, keyboard
unresponsive when bluetooth comes up, keyboard works again after dongle
unplug/replug, but no bluetooth)

Anyway, is this a kernel problem or is bluez-utils to blame?


PS: I bumped into this topic when googling for "046d:c70e". I'm not a
developer (I'm what they call "a user"), but I'm not afraid to get my
hands dirty. If you want me to run debug versions or patched kernels, I
can do that. After all, I have the hardware and I might give you
valuable information (even if I wouldn't recognise it when it spat me in
the face).

-- 
Amedee Van Gasse
amedee@amedee.be

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793
  2007-03-05 19:19 Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793 Amedee Van Gasse
@ 2007-03-05 21:54 ` Jiri Kosina
       [not found]   ` <1173191358.9292.4.camel@saruman>
  2007-03-23  9:15 ` Jiri Kosina
  1 sibling, 1 reply; 15+ messages in thread
From: Jiri Kosina @ 2007-03-05 21:54 UTC (permalink / raw)
  To: Amedee Van Gasse; +Cc: LKML, Marcel Holtmann

(added Marcel to CC)

On Mon, 5 Mar 2007, Amedee Van Gasse wrote:

> It _appears_ that the bug reports started after an update of 
> bluez-utils, but this remains to be confirmed. It could be 
> coincidence/temporal correlation (which does not imply causation).

This would be in fact very interesting to know. 1) does the BUG trigger 
only with newer versions of bluez-utils? 2) If so, does everything work 
with these older versions, or do the things fail in a same way, but 
silently?

> Anyway, is this a kernel problem or is bluez-utils to blame?

I would bet that the problem is that we don't know yet the correct 
vendor-specific report that is needed to be sent to the dongle to switch 
from HID to HCI mode. 

> PS: I bumped into this topic when googling for "046d:c70e". I'm not a 
> developer (I'm what they call "a user"), but I'm not afraid to get my 
> hands dirty. If you want me to run debug versions or patched kernels, I 
> can do that. After all, I have the hardware and I might give you 
> valuable information (even if I wouldn't recognise it when it spat me in 
> the face).

Would you also be capable of catching the report which switches the dongle 
from HID to HCI in other operating system, for which there already is a 
support?

Thanks,

-- 
Jiri Kosina

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793
       [not found]   ` <1173191358.9292.4.camel@saruman>
@ 2007-03-06 14:44     ` Jiri Kosina
  0 siblings, 0 replies; 15+ messages in thread
From: Jiri Kosina @ 2007-03-06 14:44 UTC (permalink / raw)
  To: Amedee Van Gasse; +Cc: LKML, Marcel Holtmann

On Tue, 6 Mar 2007, Amedee Van Gasse wrote:

> > This would be in fact very interesting to know. 1) does the BUG trigger 
> > only with newer versions of bluez-utils? 2) If so, does everything work 
> > with these older versions, or do the things fail in a same way, but 
> > silently?
> I could install an older version of my distribution and see what 
> happens, but that means I'll have to reserve some disk space and a lot 
> more time. I hope one of the many live cds also support bluetooth, that 
> would speed things up a lot. Will try to do that, but it'll take some 
> time.

I think that for the initial test just installing older version of 
bluez-utils might be enough to verify whether they do or don't cause the 
BUG to trigger.

> I installed something called usbsnoop and waved a lot of dead chickens 
> to convince the bluetooth receiver to pair again with the keyboard. 
> Attached is the logfile. I hope this helps, if not just tell me what you 
> need.

Thanks. Looks like there are the following reports that could potentially 
be used to switch the dongle from HID to HCI (assuming that Logitech 
didn't change behavior of its devices too much)

ff 80 00 00 03 00
ff 80 80 02 00 00
ff 80 80 01 00 00
(and maybe ff 80 09 01 00 00 ?)

This doesn't look like what is currently supported by hid2hci function 
switch_logitech(), but I would rather leave this to Marcel.

Thanks,

-- 
Jiri Kosina

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793
  2007-03-05 19:19 Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793 Amedee Van Gasse
  2007-03-05 21:54 ` Jiri Kosina
@ 2007-03-23  9:15 ` Jiri Kosina
  1 sibling, 0 replies; 15+ messages in thread
From: Jiri Kosina @ 2007-03-23  9:15 UTC (permalink / raw)
  To: Amedee Van Gasse; +Cc: LKML, Marcel Holtmann

On Mon, 5 Mar 2007, Amedee Van Gasse wrote:

> It _appears_ that the bug reports started after an update of 
> bluez-utils, but this remains to be confirmed. It could be 
> coincidence/temporal correlation (which does not imply causation).

Hi Amedee,

did you have time to confirm whether this started to happen after 
bluez-utils update, as you stated in the mail above some time ago?

Thanks,

-- 
Jiri Kosina

^ permalink raw reply	[flat|nested] 15+ messages in thread

* RE: Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793
       [not found]             ` <Pine.LNX.4.64.0702271713220.10496@twin.jikos.cz>
@ 2007-02-27 20:35               ` Fortier,Vincent [Montreal]
  0 siblings, 0 replies; 15+ messages in thread
From: Fortier,Vincent [Montreal] @ 2007-02-27 20:35 UTC (permalink / raw)
  To: Jiri Kosina; +Cc: linux-kernel, marcel, zaitcev

Hi Jiri,

Actually I don't know... Let me test this.

Here is the scenario:
1) If I plug my USB dongle after my system has booted, everything works fine (except that the keyboard repeats a few keys somethimes..)
2) If the dongle is already plugged at boot-time, there is a BUG echo in the dmesg when the bluetooth service fires up.  This make both the mouse and keyboard unresponsive until I finally unplug / replug the dongle hence going back at state 1)

I never run the hid2hci command manually but the bluetooth init script seems to do so.

Quick test:
1- unplug/plug back the dongle to get back to state 1)
The keyboard and mouse do work has expected...
2- Now run the hid2hci command has root
[root@localhost init.d]# hid2hci
Switching device 046d:c70a to HCI mode was successful
Switching device 046d:c70e to HCI mode was successful

DMESG:
input: Logitech Logitech BT Mini-Receiver as /class/input/input15
input,hiddev96: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.7-6.2.2.1.2.3
BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
 [<c0405018>] dump_trace+0x69/0x1b6
 [<c040517d>] show_trace_log_lvl+0x18/0x2c
 [<c0405778>] show_trace+0xf/0x11
 [<c0405875>] dump_stack+0x15/0x17
 [<c05993c0>] hid_output_report+0x23c/0x2e7
 [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
 [<c05997fd>] hid_submit_report+0x134/0x15f
 [<c059bd09>] hiddev_ioctl+0x327/0x88a
 [<c04802c8>] do_ioctl+0x4c/0x62
 [<c0480528>] vfs_ioctl+0x24a/0x25c
 [<c0480586>] sys_ioctl+0x4c/0x66
 [<c040404b>] syscall_call+0x7/0xb
 [<001e8402>] 0x1e8402
 =======================
BUG: warning: ....


3) Now repeat step 1):
 =======================
usb 4-6.2.2.1.2.1: new full speed USB device using ehci_hcd and address 24
usb 4-6.2.2.1.2.1: configuration #1 chosen from 1 choice
usb 4-6.2.2.1.2: USB disconnect, address 21
usb 4-6.2.2.1.2.1: USB disconnect, address 24
usb 4-6.2.2.1.2.2: USB disconnect, address 22
usb 4-6.2.2.1.2.3: USB disconnect, address 23
usb 4-6.2.2.1.2: new full speed USB device using ehci_hcd and address 25
usb 4-6.2.2.1.2: configuration #1 chosen from 1 choice
hub 4-6.2.2.1.2:1.0: USB hub found
hub 4-6.2.2.1.2:1.0: 3 ports detected
usb 4-6.2.2.1.2.1: new full speed USB device using ehci_hcd and address 26
usb 4-6.2.2.1.2.1: configuration #1 chosen from 1 choice
usb 4-6.2.2.1.2.2: new full speed USB device using ehci_hcd and address 27
usb 4-6.2.2.1.2.2: configuration #1 chosen from 1 choice
input: Logitech Logitech BT Mini-Receiver as /class/input/input16
input: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.7-6.2.2.1.2.2
usb 4-6.2.2.1.2.3: new full speed USB device using ehci_hcd and address 28
usb 4-6.2.2.1.2.3: configuration #1 chosen from 1 choice
input: Logitech Logitech BT Mini-Receiver as /class/input/input17
input,hiddev96: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.7-6.2.2.1.2.3

So yes, it looks like a hid2hci BUG or kernel BUG initiated by the hid2hci command.

- vin


> -----Message d'origine-----
> De : Jiri Kosina [mailto:jikos@jikos.cz] 
> Envoyé : 27 février 2007 11:15
> À : Fortier,Vincent [Montreal]
> Objet : RE: Boot time Bluetooth BUG: warning: (value > m) at 
> hid-core.c:793
> 
> On Tue, 27 Feb 2007, Fortier,Vincent [Montreal] wrote:
> 
> > Actually it's the first time I'm trying this keyboard and mouse.
> 
> And I guess when you use it in HID mode (i.e. when the 
> hid2hci command is not run), then keyboard and mouse work 
> with no errors reported in the kernel logs, and all the 
> buttons work correctly, am I right?
> 
> --
> Jiri Kosina
> 

^ permalink raw reply	[flat|nested] 15+ messages in thread

* RE: Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793
  2007-02-27 15:54         ` Jiri Kosina
@ 2007-02-27 16:12           ` Fortier,Vincent [Montreal]
       [not found]             ` <Pine.LNX.4.64.0702271713220.10496@twin.jikos.cz>
  0 siblings, 1 reply; 15+ messages in thread
From: Fortier,Vincent [Montreal] @ 2007-02-27 16:12 UTC (permalink / raw)
  To: Jiri Kosina, Marcel Holtmann; +Cc: linux-kernel

> 
> we understand the original CSR HID proxy dongles, but for the Logitech

> ones, it is wild guesses. The current support in hid2hci has been 
> tested on Logitech diNovo first generation and I have no other 
> Logitech hardware to verify it with. We might simply need 
> the full HID report descriptor to see who is at fault.
> 
> As far as I can see from a quick look, the device IDs are 
> unchanged (0x046d/0xc70e for the keyboard), but the report 
> descriptor seems to differ from the one you have at 
> http://www.holtmann.org/linux/bluetooth/logitech.html - that 
> seems pretty sad.
> 
> What puzzles me a bit is a fact that both the bugreporters 
> seem to state pretty clearly that this started happening 
> after some update, am I right?
> 
> Or did the hardware before work all the time in the HID mode, 
> without even being attempted to switch to HCI (which seems to 
> cause the bug)?
> 

Actually it's the first time I'm trying this keyboard and mouse.

- vin

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793
  2007-02-19  0:25       ` Marcel Holtmann
  2007-02-19  9:36         ` Jiri Kosina
@ 2007-02-27 15:54         ` Jiri Kosina
  2007-02-27 16:12           ` Fortier,Vincent [Montreal]
  1 sibling, 1 reply; 15+ messages in thread
From: Jiri Kosina @ 2007-02-27 15:54 UTC (permalink / raw)
  To: Marcel Holtmann; +Cc: Fortier,Vincent [Montreal], linux-kernel

On Mon, 19 Feb 2007, Marcel Holtmann wrote:

> we understand the original CSR HID proxy dongles, but for the Logitech 
> ones, it is wild guesses. The current support in hid2hci has been tested 
> on Logitech diNovo first generation and I have no other Logitech 
> hardware to verify it with. We might simply need the full HID report 
> descriptor to see who is at fault.

As far as I can see from a quick look, the device IDs are unchanged 
(0x046d/0xc70e for the keyboard), but the report descriptor seems to 
differ from the one you have at 
http://www.holtmann.org/linux/bluetooth/logitech.html - that seems pretty 
sad.

What puzzles me a bit is a fact that both the bugreporters seem to state 
pretty clearly that this started happening after some update, am I right?

Or did the hardware before work all the time in the HID mode, without even 
being attempted to switch to HCI (which seems to cause the bug)?

-- 
Jiri Kosina

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793
  2007-02-22 10:38     ` Veronique & Vincent
@ 2007-02-22 10:46       ` Jiri Kosina
  0 siblings, 0 replies; 15+ messages in thread
From: Jiri Kosina @ 2007-02-22 10:46 UTC (permalink / raw)
  To: Veronique & Vincent
  Cc: Pete Zaitcev, marcel, vincent.fortier1, linux-kernel

On Thu, 22 Feb 2007, Veronique & Vincent wrote:

> > > - report descriptor dump - seems to be missing in the output (it 
> > >   should read something like "hid-core.c: report descriptor (size 
> > >   XY, read YZ) = ... some hexadecimal numbers". This should be 
> > >   output by the time the HID device is connected.
> The full dmesg with define DEBUG was included in the original message.  Unless 
> something else was needed?

Unfortunately it was missing the report descriptor dump. The output should 
look like

drivers/usb/input/hid-core.c: report descriptor (size 59, read 59) = 05 01 
09 06 a1 01 05 07 19 e0 29 e7 15 00 25 01 75 01 95 08 81 02 81 03 95 05 05 
08 19 01 29 05 91 02 95 01 75 03 91 01 95 06 75 08 15 00 26 a4 00 05 07 19 
00 2a a4 00 81 00 c0

and it should appear as soon as you connect the device. If it didn't, I 
suspect that the 

	#define DEBUG_DATA

was not set properly in drivers/usb/input/hid-core.c (only defining DEBUG 
is not enough for report descriptor dump to appear).

> I was actually getting that on a stock FC6 kernel.  The dmesg output 
> comes from a recompiled vanilla 2.6.19.x with the exact same 
> configuration BUT the modified define's in hid-core.c and a local 
> version appended to the .config file.  So this BUG does not only affect 
> FC6 users but also the vanilla kernel.

But so far all reports that have gathered for this bug at me seem to come 
from FC6 ... does hid2hci by any chance in FC6 have any additional patches 
that could be causing it, instead of being a kernel issue?

Thanks,

-- 
Jiri Kosina

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793
  2007-02-22  2:50   ` Pete Zaitcev
  2007-02-22  8:04     ` Jiri Kosina
@ 2007-02-22 10:38     ` Veronique & Vincent
  2007-02-22 10:46       ` Jiri Kosina
  1 sibling, 1 reply; 15+ messages in thread
From: Veronique & Vincent @ 2007-02-22 10:38 UTC (permalink / raw)
  To: Pete Zaitcev, Jiri Kosina; +Cc: marcel, vincent.fortier1, linux-kernel

> 
> > > I've set up the hid-core.c to DEBUG mode... and it literally got pretty 
verbose...
> 
> > thanks for the output. Is this really the full output? The important part 
> > - report descriptor dump - seems to be missing in the output (it should 
> > read something like "hid-core.c: report descriptor (size XY, read YZ) = 
> > ... some hexadecimal numbers". This should be output by the time the HID 
> > device is connected.

The full dmesg with define DEBUG was included in the original message.  Unless 
something else was needed?

> Can I get something useful without a kernel recompile, with something
> like evtest? I have users on Fedora hitting this too. It very likely is
> a regression caused by the new unified HID.

I was actually getting that on a stock FC6 kernel.  The dmesg output comes 
from a recompiled vanilla 2.6.19.x with the exact same configuration BUT the 
modified define's in hid-core.c and a local version appended to the .config 
file.  So this BUG does not only affect FC6 users but also the vanilla 
kernel.

> https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=227598
> https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=228755

Good thing, I've added myself to the CC list of both.

> 
> -- Pete
> 

- vin

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793
  2007-02-22  2:50   ` Pete Zaitcev
@ 2007-02-22  8:04     ` Jiri Kosina
  2007-02-22 10:38     ` Veronique & Vincent
  1 sibling, 0 replies; 15+ messages in thread
From: Jiri Kosina @ 2007-02-22  8:04 UTC (permalink / raw)
  To: Pete Zaitcev; +Cc: vinctre, marcel, vincent.fortier1, linux-kernel

On Wed, 21 Feb 2007, Pete Zaitcev wrote:

> Can I get something useful without a kernel recompile, with something 
> like evtest? I have users on Fedora hitting this too. It very likely is 
> a regression caused by the new unified HID.
> https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=227598
> https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=228755

Hi Pete,

I don't think that this is caused by the newly introduced generic HID 
layer - I can see that both the bugreports in RH bugzilla are reported 
against 2.6.19-1.2895.fc6. I have downloaded the source RPM and discovered 
that these kernels are based on vanilla 2.6.19.2 - these kernels didn't 
have generic HID layer yet, so this can't be the case.

The thing is that hid2hci sends through hiddev some excessivelly large 
value, and HID subsystem then complains about it. It could be that the 
device has a broken report descriptor (*), which results in buggy behavior 
of sw.

It would be really nice to get the report descriptor - Vincent, it wasn't 
in your output. There is a following code in drivers/usb/input/hid-core.c

#ifdef DEBUG_DATA
        printk(KERN_DEBUG __FILE__ ": report descriptor (size %u, read %d) = ", rsize, n);
        for (n = 0; n < rsize; n++)
                printk(" %02x", (unsigned char) rdesc[n]);
        printk("\n");
#endif

Could you make sure that you really compiled this file with 

	#define DEBUG_DATA

so that you get this output upon connection of new USB HID device?

(*) Which looks quite probable to me - I have been playing yesterday with 
another masterpiece from Logitech (S510 keyboard), which also requires 
fixing its report descriptor on-the-fly because it is fully usable :(

-- 
Jiri Kosina

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793
  2007-02-20  8:02 ` Jiri Kosina
@ 2007-02-22  2:50   ` Pete Zaitcev
  2007-02-22  8:04     ` Jiri Kosina
  2007-02-22 10:38     ` Veronique & Vincent
  0 siblings, 2 replies; 15+ messages in thread
From: Pete Zaitcev @ 2007-02-22  2:50 UTC (permalink / raw)
  To: Jiri Kosina; +Cc: vinctre, marcel, vincent.fortier1, linux-kernel, zaitcev

On Tue, 20 Feb 2007 09:02:53 +0100 (CET), Jiri Kosina <jikos@jikos.cz> wrote:
> On Mon, 19 Feb 2007, Veronique & Vincent wrote:

> > Hi again Marcel and Jiri,
> > I've set up the hid-core.c to DEBUG mode... and it literally got pretty verbose...

> thanks for the output. Is this really the full output? The important part 
> - report descriptor dump - seems to be missing in the output (it should 
> read something like "hid-core.c: report descriptor (size XY, read YZ) = 
> ... some hexadecimal numbers". This should be output by the time the HID 
> device is connected.

Can I get something useful without a kernel recompile, with something
like evtest? I have users on Fedora hitting this too. It very likely is
a regression caused by the new unified HID.

https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=227598
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=228755

-- Pete

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793
  2007-02-19  0:25       ` Marcel Holtmann
@ 2007-02-19  9:36         ` Jiri Kosina
  2007-02-27 15:54         ` Jiri Kosina
  1 sibling, 0 replies; 15+ messages in thread
From: Jiri Kosina @ 2007-02-19  9:36 UTC (permalink / raw)
  To: Marcel Holtmann; +Cc: Fortier,Vincent [Montreal], linux-kernel

On Mon, 19 Feb 2007, Marcel Holtmann wrote:

> we understand the original CSR HID proxy dongles, but for the Logitech 
> ones, it is wild guesses. The current support in hid2hci has been tested 
> on Logitech diNovo first generation and I have no other Logitech 
> hardware to verify it with. We might simply need the full HID report 
> descriptor to see who is at fault.

Vincent,

from the stacktrace it seems that you are using pre-2.6.20 kernel. Could 
you please compile kernel with the following changes in 
drivers/usb/input/hid-core.c

- comment the #undef DEBUG and #undef DEBUG_DATA
- add #define DEBUG and #define DEBUG_DATA

and send us the output?

-- 
Jiri Kosina

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793
  2007-02-18 21:23     ` Jiri Kosina
@ 2007-02-19  0:25       ` Marcel Holtmann
  2007-02-19  9:36         ` Jiri Kosina
  2007-02-27 15:54         ` Jiri Kosina
  0 siblings, 2 replies; 15+ messages in thread
From: Marcel Holtmann @ 2007-02-19  0:25 UTC (permalink / raw)
  To: Jiri Kosina; +Cc: Fortier,Vincent [Montreal], linux-kernel

Hi Jiri,

> > I m using a Logitech MX 5000 keyboard with an included MX 1000 mouse,
> > both bluetooth using the same USB reciever.
> > When the USB reciever is already plugged-in at boot-time and the
> > Bluetooth service fires-up I get this message:
> >  =======================
> > BUG: warning: (value > m) at
> > drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
> >  [<c0405018>] dump_trace+0x69/0x1b6
> >  [<c040517d>] show_trace_log_lvl+0x18/0x2c
> >  [<c0405778>] show_trace+0xf/0x11
> >  [<c0405875>] dump_stack+0x15/0x17
> >  [<c05993c0>] hid_output_report+0x23c/0x2e7
> >  [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
> >  [<c05997fd>] hid_submit_report+0x134/0x15f
> >  [<c059bd09>] hiddev_ioctl+0x327/0x88a
> >  [<c04802c8>] do_ioctl+0x4c/0x62
> >  [<c0480528>] vfs_ioctl+0x24a/0x25c
> >  [<c0480586>] sys_ioctl+0x4c/0x66
> >  [<c040404b>] syscall_call+0x7/0xb
> >  [<005b5402>] 0x5b5402
> >  =======================
> 
> (added Marcel to CC)
> 
> This means that something (I guess that it's hid2hci command?) is trying 
> to pass through hiddev a value in a field that is greater than a given 
> bitmask (and is not going to fit into the bitfield).
> 
> Vincent, does the problem go away when you don't use bluetooth (both 
> keyboard and mouse is switched to HID mode, if they support it)?
> 
> Marcel, do you have any idea how this could happen?

we understand the original CSR HID proxy dongles, but for the Logitech
ones, it is wild guesses. The current support in hid2hci has been tested
on Logitech diNovo first generation and I have no other Logitech
hardware to verify it with. We might simply need the full HID report
descriptor to see who is at fault.

Regards

Marcel



^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793
  2007-02-16 15:27   ` Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793 Fortier,Vincent [Montreal]
@ 2007-02-18 21:23     ` Jiri Kosina
  2007-02-19  0:25       ` Marcel Holtmann
  0 siblings, 1 reply; 15+ messages in thread
From: Jiri Kosina @ 2007-02-18 21:23 UTC (permalink / raw)
  To: Fortier,Vincent [Montreal]; +Cc: linux-kernel, Marcel Holtmann

On Fri, 16 Feb 2007, Fortier,Vincent [Montreal] wrote:

> I m using a Logitech MX 5000 keyboard with an included MX 1000 mouse,
> both bluetooth using the same USB reciever.
> When the USB reciever is already plugged-in at boot-time and the
> Bluetooth service fires-up I get this message:
>  =======================
> BUG: warning: (value > m) at
> drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
>  [<c0405018>] dump_trace+0x69/0x1b6
>  [<c040517d>] show_trace_log_lvl+0x18/0x2c
>  [<c0405778>] show_trace+0xf/0x11
>  [<c0405875>] dump_stack+0x15/0x17
>  [<c05993c0>] hid_output_report+0x23c/0x2e7
>  [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
>  [<c05997fd>] hid_submit_report+0x134/0x15f
>  [<c059bd09>] hiddev_ioctl+0x327/0x88a
>  [<c04802c8>] do_ioctl+0x4c/0x62
>  [<c0480528>] vfs_ioctl+0x24a/0x25c
>  [<c0480586>] sys_ioctl+0x4c/0x66
>  [<c040404b>] syscall_call+0x7/0xb
>  [<005b5402>] 0x5b5402
>  =======================

(added Marcel to CC)

This means that something (I guess that it's hid2hci command?) is trying 
to pass through hiddev a value in a field that is greater than a given 
bitmask (and is not going to fit into the bitfield).

Vincent, does the problem go away when you don't use bluetooth (both 
keyboard and mouse is switched to HID mode, if they support it)?

Marcel, do you have any idea how this could happen?

Thanks,

-- 
Jiri Kosina

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793
  2007-02-16 15:02 ` [KJ] [PATCH] " Richard Knutsson
@ 2007-02-16 15:27   ` Fortier,Vincent [Montreal]
  2007-02-18 21:23     ` Jiri Kosina
  0 siblings, 1 reply; 15+ messages in thread
From: Fortier,Vincent [Montreal] @ 2007-02-16 15:27 UTC (permalink / raw)
  To: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 2021 bytes --]

Hi all

I m using a Logitech MX 5000 keyboard with an included MX 1000 mouse,
both bluetooth using the same USB reciever.

When the USB reciever is already plugged-in at boot-time and the
Bluetooth service fires-up I get this message:
 =======================
BUG: warning: (value > m) at
drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
 [<c0405018>] dump_trace+0x69/0x1b6
 [<c040517d>] show_trace_log_lvl+0x18/0x2c
 [<c0405778>] show_trace+0xf/0x11
 [<c0405875>] dump_stack+0x15/0x17
 [<c05993c0>] hid_output_report+0x23c/0x2e7
 [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
 [<c05997fd>] hid_submit_report+0x134/0x15f
 [<c059bd09>] hiddev_ioctl+0x327/0x88a
 [<c04802c8>] do_ioctl+0x4c/0x62
 [<c0480528>] vfs_ioctl+0x24a/0x25c
 [<c0480586>] sys_ioctl+0x4c/0x66
 [<c040404b>] syscall_call+0x7/0xb
 [<005b5402>] 0x5b5402
 =======================

At this point both the keyboard and mouse do not work.  I simply have to
remove/replug the reciever to make them work properly... Here is the
dmesg associated with the replug:
usb 2-2: USB disconnect, address 3
usb 2-2.1: USB disconnect, address 6
usb 2-2.2: USB disconnect, address 4
usb 2-2.3: USB disconnect, address 5
usb 2-2: new full speed USB device using uhci_hcd and address 7
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 3 ports detected
usb 2-2.2: new full speed USB device using uhci_hcd and address 8
usb 2-2.2: configuration #1 chosen from 1 choice
input: Logitech Logitech BT Mini-Receiver as /class/input/input6
input: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on
usb-0000:00:1d.1-2.2
usb 2-2.3: new full speed USB device using uhci_hcd and address 9
usb 2-2.3: configuration #1 chosen from 1 choice
input: Logitech Logitech BT Mini-Receiver as /class/input/input7
input,hiddev96: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver]
on usb-0000:00:1d.1-2.3

Kernel: 2.6.19 on i686

I have attached the lsusb output and dmesg.

- vin

[-- Attachment #2: lsusb.txt --]
[-- Type: text/plain, Size: 22408 bytes --]


Bus 001 Device 001: ID 0000:0000  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed hub
  bMaxPacketSize0        64
  idVendor           0x0000 
  idProduct          0x0000 
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.19-1.2911.fc6 uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:1d.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0xc0
  PortPwrCtrlMask    0x66 
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power

Bus 003 Device 001: ID 0000:0000  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed hub
  bMaxPacketSize0        64
  idVendor           0x0000 
  idProduct          0x0000 
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.19-1.2911.fc6 uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:1d.2
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0xc0
  PortPwrCtrlMask    0x66 
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power

Bus 004 Device 001: ID 0000:0000  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x0000 
  idProduct          0x0000 
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.19-1.2911.fc6 ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:00:1d.7
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             6
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0xc0
  PortPwrCtrlMask    0x66 
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0000
   Port 5: 0000.0100 power
   Port 6: 0000.0503 highspeed power enable connect

Bus 004 Device 003: ID 413c:0058 Dell Computer Corp. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         2 TT per port
  bMaxPacketSize0        64
  idVendor           0x413c Dell Computer Corp.
  idProduct          0x0058 
  bcdDevice           10.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           41
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      1 Single TT
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      2 TT per port
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             4
  wHubCharacteristic 0x0089
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
    Port indicators
  bPwrOn2PwrGood       50 * 2 milli seconds
  bHubContrCurrent    100 milli Ampere
  DeviceRemovable    0xc0
  PortPwrCtrlMask    0x66 
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0503 highspeed power enable connect
   Port 3: 0000.0100 power
   Port 4: 0000.0103 power enable connect
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed hub
  bMaxPacketSize0        64
  bNumConfigurations      1

Bus 004 Device 004: ID 413c:0058 Dell Computer Corp. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         2 TT per port
  bMaxPacketSize0        64
  idVendor           0x413c Dell Computer Corp.
  idProduct          0x0058 
  bcdDevice           10.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           41
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      1 Single TT
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      2 TT per port
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             4
  wHubCharacteristic 0x0089
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
    Port indicators
  bPwrOn2PwrGood       50 * 2 milli seconds
  bHubContrCurrent    100 milli Ampere
  DeviceRemovable    0xc0
  PortPwrCtrlMask    0x66 
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed hub
  bMaxPacketSize0        64
  bNumConfigurations      1

Bus 004 Device 005: ID 054c:002c Sony Corp. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x054c Sony Corp.
  idProduct          0x002c 
  bcdDevice            6.01
  iManufacturer           1 Sony
  iProduct                2 USB Floppy Drive
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      4 Floppy (UFI)
      bInterfaceProtocol      0 Control/Bulk/Interrupt
      iInterface              4 FLOPPY
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval              16

Bus 002 Device 009: ID 046d:c70a Logitech, Inc. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x046d Logitech, Inc.
  idProduct          0xc70a 
  bcdDevice           40.02
  iManufacturer           1 Logitech
  iProduct                2 Logitech BT Mini-Receiver
  iSerial                 3 0007FA61C268
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4 RR40.02_B0036
    bmAttributes         0xa0
      Remote Wakeup
    MaxPower               98mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Devices
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      2 Mouse
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.11
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength     226
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval               5

Bus 002 Device 008: ID 046d:c70e Logitech, Inc. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x046d Logitech, Inc.
  idProduct          0xc70e 
  bcdDevice           40.02
  iManufacturer           1 Logitech
  iProduct                2 Logitech BT Mini-Receiver
  iSerial                 3 0007FA61C268
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4 RR40.02_B0036
    bmAttributes         0xa0
      Remote Wakeup
    MaxPower               98mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Devices
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      1 Keyboard
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.11
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      59
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              10

Bus 002 Device 007: ID 046d:0b02 Logitech, Inc. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed hub
  bMaxPacketSize0         8
  idVendor           0x046d Logitech, Inc.
  idProduct          0x0b02 
  bcdDevice           40.02
  iManufacturer           1 Logitech
  iProduct                2 Logitech BT Mini-Receiver
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             3
  wHubCharacteristic 0x0004
    Ganged power switching
    Compound device
    Ganged overcurrent protection
  bPwrOn2PwrGood       50 * 2 milli seconds
  bHubContrCurrent    100 milli Ampere
  DeviceRemovable    0xc0
  PortPwrCtrlMask    0x66 
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0103 power enable connect
   Port 3: 0000.0103 power enable connect

Bus 002 Device 001: ID 0000:0000  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed hub
  bMaxPacketSize0        64
  idVendor           0x0000 
  idProduct          0x0000 
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.19-1.2911.fc6 uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:1d.1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0xc0
  PortPwrCtrlMask    0x66 
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0103 power enable connect

[-- Attachment #3: dmesg.2.6.19-1.2911.fc6.PreBoot-plugged.txt --]
[-- Type: text/plain, Size: 27292 bytes --]

Linux version 2.6.19-1.2911.fc6 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sat Feb 10 15:51:47 EST 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ffae000 (usable)
 BIOS-e820: 000000003ffae000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 262062) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   262062
early_node_map[1] active PFN ranges
    0:        0 ->   262062
On node 0 totalpages: 262062
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 255 pages used for memmap
  HighMem zone: 32431 pages, LIFO batch:7
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 DELL                                  ) @ 0x000fdf00
ACPI: RSDT (v001 DELL    CPi R   0x27d5061e ASL  0x00000061) @ 0x3fff0000
ACPI: FADT (v001 DELL    CPi R   0x27d5061e ASL  0x00000061) @ 0x3fff0400
ACPI: ASF! (v016 DELL    CPi R   0x27d5061e ASL  0x00000061) @ 0x3fff0800
ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Allocating PCI resources starting at 50000000 (gap: 40000000:beda0000)
Detected 1998.429 MHz processor.
Built 1 zonelists.  Total pages: 260015
Kernel command line: ro root=LABEL=/ vga=0x305
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01829000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0806000 soft=c07e6000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032176k/1048248k available (2210k kernel code, 15352k reserved, 1131k data, 240k init, 130744k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc07a5000 - 0xc07e1000   ( 240 kB)
      .data : 0xc0628a27 - 0xc07438f4   (1131 kB)
      .text : 0xc0400000 - 0xc0628a27   (2210 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3998.18 BogoMIPS (lpj=1999091)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f1bf 00000000 00000000 00000040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0800)
CPU0: Intel(R) Pentium(R) M processor 2.00GHz stepping 06
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=424 bytes
sizeof(dentry)=144 bytes
sizeof(ext3inode)=600 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=172 bytes
sizeof(task_struct)=1376 bytes
checking if image is initramfs... it is
Freeing initrd memory: 1541k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc96e, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0880-08bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
PCI: Bus #07 (-#0a) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:02: ioport range 0x800-0x805 could not be reserved
pnp: 00:02: ioport range 0x808-0x80f could not be reserved
pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
pnp: 00:03: ioport range 0x806-0x807 has been reserved
pnp: 00:03: ioport range 0x810-0x85f could not be reserved
pnp: 00:03: ioport range 0x860-0x87f has been reserved
pnp: 00:03: ioport range 0x880-0x8bf has been reserved
pnp: 00:03: ioport range 0x8c0-0x8df has been reserved
pnp: 00:08: ioport range 0x900-0x97f has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: c000-cfff
  MEM window: fc000000-fdffffff
  PREFETCH window: d0000000-dfffffff
PCI: Bus 3, cardbus bridge: 0000:02:01.0
  IO window: 0000d000-0000d0ff
  IO window: 0000d400-0000d4ff
  PREFETCH window: 50000000-51ffffff
  MEM window: f6000000-f7ffffff
PCI: Bus 7, cardbus bridge: 0000:02:01.1
  IO window: 0000d800-0000d8ff
  IO window: 0000dc00-0000dcff
  PREFETCH window: 52000000-53ffffff
  MEM window: f8000000-f9ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: d000-efff
  MEM window: f6000000-fbffffff
  PREFETCH window: 50000000-53ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1171638161.662:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key BE1C9570C411C444
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 131072k
vesafb: mode is 1024x768x8, linelength=1024, pages=3
vesafb: protected mode interface info at c000:e560
vesafb: pmi: set display start = c00ce596, set palette = c00ce600
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THM] (56 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: AGP aperture is 128M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: Hitachi HTS721060G9AT00, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: _NEC DVD+RW ND-6100A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 117210240 sectors (60011 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
ide-floppy driver 0.99.newide
Yenta: CardBus bridge found at 0000:02:01.0 [1028:014e]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:01.0, mfunc 0x012c1202, devctl 0x64
Yenta: ISA IRQ mask 0x04d8, PCI irq 11
Socket status: 30000410
Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
cs: IO port probe 0xd000-0xefff: clean.
pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
Yenta: CardBus bridge found at 0000:02:01.1 [1028:014e]
Yenta: ISA IRQ mask 0x04d8, PCI irq 11
Socket status: 30000047
Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
cs: IO port probe 0xd000-0xefff: clean.
pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 240k freed
Time: acpi_pm clocksource has been installed.
Write protecting the kernel read-only data: 415k
input: AT Translated Set 2 keyboard as /class/input/input0
pccard: PCMCIA card inserted into slot 0
cs: memory probe 0xf6000000-0xfbffffff: excluding 0xf6000000-0xfa1fffff 0xfae00000-0xfb3fffff
pcmcia: registering new device pcmcia0.0
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
input: PS/2 Mouse as /class/input/input1
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4fffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
SCSI subsystem initialized
libata version 2.00 loaded.
device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
usb 4-6: new high speed USB device using ehci_hcd and address 3
usb 4-6: configuration #1 chosen from 1 choice
hub 4-6:1.0: USB hub found
hub 4-6:1.0: 4 ports detected
usb 2-2: new full speed USB device using uhci_hcd and address 3
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 3 ports detected
usb 4-6.2: new high speed USB device using ehci_hcd and address 4
usb 4-6.2: configuration #1 chosen from 1 choice
hub 4-6.2:1.0: USB hub found
hub 4-6.2:1.0: 4 ports detected
usb 4-6.4: new full speed USB device using ehci_hcd and address 5
usb 4-6.4: configuration #1 chosen from 1 choice
usb 2-2.2: new full speed USB device using uhci_hcd and address 4
Initializing USB Mass Storage driver...
usb 2-2.2: configuration #1 chosen from 1 choice
input: Logitech Logitech BT Mini-Receiver as /class/input/input3
input: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.1-2.2
usb 2-2.3: new full speed USB device using uhci_hcd and address 5
usb 2-2.3: configuration #1 chosen from 1 choice
input: Logitech Logitech BT Mini-Receiver as /class/input/input4
input,hiddev96: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.1-2.3
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
audit(1171638170.739:2): selinux=0 auid=4294967295
scsi 0:0:0:0: Direct-Access     SONY     USB-FDU          6.01 PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: Attached scsi removable disk sda
usb-storage: device scan complete
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
0.0: ttyS1 at I/O 0xd3f8 (irq = 3) is a 16450
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
ieee1394: Initialized config rom entry `ip1394'
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
input: PC Speaker as /class/input/input5
bcm43xx driver
ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
bcm43xx: Chip ID 0x4306, rev 0x3
bcm43xx: Number of cores: 5
bcm43xx: Core 0: ID 0x800, rev 0x4, vendor 0x4243, enabled
bcm43xx: Core 1: ID 0x812, rev 0x5, vendor 0x4243, disabled
bcm43xx: Core 2: ID 0x80d, rev 0x2, vendor 0x4243, enabled
bcm43xx: Core 3: ID 0x807, rev 0x2, vendor 0x4243, disabled
bcm43xx: Core 4: ID 0x804, rev 0x9, vendor 0x4243, enabled
bcm43xx: PHY connected
bcm43xx: Detected PHY: Version: 2, Type 2, Revision 2
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.00 (08-Oct-2006)
iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: PCI Interrupt 0000:02:01.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[fafef800-fafeffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
tg3.c:v3.69 (November 15, 2006)
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
eth1: Tigon3 [partno(BCM95705A50) rev 3001 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:11:43:6c:ad:cd
eth1: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
eth1: dma_rwctrl[763f0000] dma_mask[64-bit]
sd 0:0:0:0: Attached scsi generic sg0 type 0
nvidia: module license 'NVIDIA' taints kernel.
intel_rng: FWH not detected
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
NVRM: loading NVIDIA UNIX x86 Kernel Module  1.0-9746  Fri Dec 15 09:54:45 PST 2006
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[344fc00037a260c1]
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
intel8x0_measure_ac97_clock: measured 50427 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.6 to 64
MC'97 1 converters and GPIO not ready (0xff00)
floppy0: no floppy controllers found
lp0: using parport0 (interrupt-driven).
lp0: console ready
sonypi: Sony Programmable I/O Controller Driver v1.26.
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PBTN]
ACPI: Sleep Button (CM) [SBTN]
ACPI: ACPI Dock Station Driver 
ibm_acpi: ec object not found
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on hda5, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2048248k swap on /dev/hda6.  Priority:-1 extents:1 across:2048248k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
PM: Writing back config space on device 0000:02:00.0 at offset b (was 165d14e4, writing 865d1028)
PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
PM: Writing back config space on device 0000:02:00.0 at offset 2 (was 2000000, writing 2000001)
PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2b00000, writing 2b00106)
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
 [<c0405018>] dump_trace+0x69/0x1b6
 [<c040517d>] show_trace_log_lvl+0x18/0x2c
 [<c0405778>] show_trace+0xf/0x11
 [<c0405875>] dump_stack+0x15/0x17
 [<c05993c0>] hid_output_report+0x23c/0x2e7
 [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
 [<c05997fd>] hid_submit_report+0x134/0x15f
 [<c059bd09>] hiddev_ioctl+0x327/0x88a
 [<c04802c8>] do_ioctl+0x4c/0x62
 [<c0480528>] vfs_ioctl+0x24a/0x25c
 [<c0480586>] sys_ioctl+0x4c/0x66
 [<c040404b>] syscall_call+0x7/0xb
 [<005b5402>] 0x5b5402
 =======================
BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
 [<c0405018>] dump_trace+0x69/0x1b6
 [<c040517d>] show_trace_log_lvl+0x18/0x2c
 [<c0405778>] show_trace+0xf/0x11
 [<c0405875>] dump_stack+0x15/0x17
 [<c05993c0>] hid_output_report+0x23c/0x2e7
 [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
 [<c05997fd>] hid_submit_report+0x134/0x15f
 [<c059bd09>] hiddev_ioctl+0x327/0x88a
 [<c04802c8>] do_ioctl+0x4c/0x62
 [<c0480528>] vfs_ioctl+0x24a/0x25c
 [<c0480586>] sys_ioctl+0x4c/0x66
 [<c040404b>] syscall_call+0x7/0xb
 [<005b5402>] 0x5b5402
 =======================
BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
 [<c0405018>] dump_trace+0x69/0x1b6
 [<c040517d>] show_trace_log_lvl+0x18/0x2c
 [<c0405778>] show_trace+0xf/0x11
 [<c0405875>] dump_stack+0x15/0x17
 [<c05993c0>] hid_output_report+0x23c/0x2e7
 [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
 [<c05997fd>] hid_submit_report+0x134/0x15f
 [<c059bd09>] hiddev_ioctl+0x327/0x88a
 [<c04802c8>] do_ioctl+0x4c/0x62
 [<c0480528>] vfs_ioctl+0x24a/0x25c
 [<c0480586>] sys_ioctl+0x4c/0x66
 [<c040404b>] syscall_call+0x7/0xb
 [<005b5402>] 0x5b5402
 =======================
BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
 [<c0405018>] dump_trace+0x69/0x1b6
 [<c040517d>] show_trace_log_lvl+0x18/0x2c
 [<c0405778>] show_trace+0xf/0x11
 [<c0405875>] dump_stack+0x15/0x17
 [<c05993c0>] hid_output_report+0x23c/0x2e7
 [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
 [<c05997fd>] hid_submit_report+0x134/0x15f
 [<c059bd09>] hiddev_ioctl+0x327/0x88a
 [<c04802c8>] do_ioctl+0x4c/0x62
 [<c0480528>] vfs_ioctl+0x24a/0x25c
 [<c0480586>] sys_ioctl+0x4c/0x66
 [<c040404b>] syscall_call+0x7/0xb
 [<005b5402>] 0x5b5402
 =======================
BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
 [<c0405018>] dump_trace+0x69/0x1b6
 [<c040517d>] show_trace_log_lvl+0x18/0x2c
 [<c0405778>] show_trace+0xf/0x11
 [<c0405875>] dump_stack+0x15/0x17
 [<c05993c0>] hid_output_report+0x23c/0x2e7
 [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
 [<c05997fd>] hid_submit_report+0x134/0x15f
 [<c059bd09>] hiddev_ioctl+0x327/0x88a
 [<c04802c8>] do_ioctl+0x4c/0x62
 [<c0480528>] vfs_ioctl+0x24a/0x25c
 [<c0480586>] sys_ioctl+0x4c/0x66
 [<c040404b>] syscall_call+0x7/0xb
 [<005b5402>] 0x5b5402
 =======================
BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
 [<c0405018>] dump_trace+0x69/0x1b6
 [<c040517d>] show_trace_log_lvl+0x18/0x2c
 [<c0405778>] show_trace+0xf/0x11
 [<c0405875>] dump_stack+0x15/0x17
 [<c05993c0>] hid_output_report+0x23c/0x2e7
 [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
 [<c05997fd>] hid_submit_report+0x134/0x15f
 [<c059bd09>] hiddev_ioctl+0x327/0x88a
 [<c04802c8>] do_ioctl+0x4c/0x62
 [<c0480528>] vfs_ioctl+0x24a/0x25c
 [<c0480586>] sys_ioctl+0x4c/0x66
 [<c040404b>] syscall_call+0x7/0xb
 [<005b5402>] 0x5b5402
 =======================
BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
 [<c0405018>] dump_trace+0x69/0x1b6
 [<c040517d>] show_trace_log_lvl+0x18/0x2c
 [<c0405778>] show_trace+0xf/0x11
 [<c0405875>] dump_stack+0x15/0x17
 [<c05993c0>] hid_output_report+0x23c/0x2e7
 [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
 [<c05997fd>] hid_submit_report+0x134/0x15f
 [<c059bd09>] hiddev_ioctl+0x327/0x88a
 [<c04802c8>] do_ioctl+0x4c/0x62
 [<c0480528>] vfs_ioctl+0x24a/0x25c
 [<c0480586>] sys_ioctl+0x4c/0x66
 [<c040404b>] syscall_call+0x7/0xb
 [<005b5402>] 0x5b5402
 =======================
BUG: warning: (value > m) at drivers/usb/input/hid-core.c:793/implement() (Tainted: P     )
 [<c0405018>] dump_trace+0x69/0x1b6
 [<c040517d>] show_trace_log_lvl+0x18/0x2c
 [<c0405778>] show_trace+0xf/0x11
 [<c0405875>] dump_stack+0x15/0x17
 [<c05993c0>] hid_output_report+0x23c/0x2e7
 [<c05994b7>] hid_submit_ctrl+0x4c/0x1d9
 [<c05997fd>] hid_submit_report+0x134/0x15f
 [<c059bd09>] hiddev_ioctl+0x327/0x88a
 [<c04802c8>] do_ioctl+0x4c/0x62
 [<c0480528>] vfs_ioctl+0x24a/0x25c
 [<c0480586>] sys_ioctl+0x4c/0x66
 [<c040404b>] syscall_call+0x7/0xb
 [<005b5402>] 0x5b5402
 =======================
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
usb 2-2.1: new full speed USB device using uhci_hcd and address 6
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
usb 2-2.1: configuration #1 chosen from 1 choice
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
eth0: no IPv6 routers present
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode

^ permalink raw reply	[flat|nested] 15+ messages in thread

end of thread, other threads:[~2007-03-23  9:16 UTC | newest]

Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-03-05 19:19 Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793 Amedee Van Gasse
2007-03-05 21:54 ` Jiri Kosina
     [not found]   ` <1173191358.9292.4.camel@saruman>
2007-03-06 14:44     ` Jiri Kosina
2007-03-23  9:15 ` Jiri Kosina
  -- strict thread matches above, loose matches on Subject: below --
2007-02-20  2:11 Fwd: " Veronique & Vincent
2007-02-20  8:02 ` Jiri Kosina
2007-02-22  2:50   ` Pete Zaitcev
2007-02-22  8:04     ` Jiri Kosina
2007-02-22 10:38     ` Veronique & Vincent
2007-02-22 10:46       ` Jiri Kosina
2007-02-16 12:03 [KJ][PATCH] is_power_of_2 in ia64mm Vignesh Babu BM
2007-02-16 15:02 ` [KJ] [PATCH] " Richard Knutsson
2007-02-16 15:27   ` Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793 Fortier,Vincent [Montreal]
2007-02-18 21:23     ` Jiri Kosina
2007-02-19  0:25       ` Marcel Holtmann
2007-02-19  9:36         ` Jiri Kosina
2007-02-27 15:54         ` Jiri Kosina
2007-02-27 16:12           ` Fortier,Vincent [Montreal]
     [not found]             ` <Pine.LNX.4.64.0702271713220.10496@twin.jikos.cz>
2007-02-27 20:35               ` Fortier,Vincent [Montreal]

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).