LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH] clocksource: sh_cmt: Fix wrong setting if don't request IRQ for clock source channel
@ 2021-04-22 12:34 Niklas Söderlund
  2021-06-10 12:45 ` Daniel Lezcano
  2021-08-26 16:25 ` [tip: timers/core] clocksource/drivers/sh_cmt: " tip-bot2 for Phong Hoang
  0 siblings, 2 replies; 5+ messages in thread
From: Niklas Söderlund @ 2021-04-22 12:34 UTC (permalink / raw)
  To: Daniel Lezcano, Wolfram Sang, linux-kernel
  Cc: linux-renesas-soc, Phong Hoang, Niklas Söderlund

From: Phong Hoang <phong.hoang.wz@renesas.com>

If CMT instance has at least two channels, one channel will be used
as a clock source and another one used as a clock event device.
In that case, IRQ is not requested for clock source channel so
sh_cmt_clock_event_program_verify() might work incorrectly.
Besides, when a channel is only used for clock source, don't need to
re-set the next match_value since it should be maximum timeout as
it still is.

On the other hand, due to no IRQ, total_cycles is not counted up
when reaches compare match time (timer counter resets to zero),
so sh_cmt_clocksource_read() returns unexpected value.
Therefore, use 64-bit clocksoure's mask for 32-bit or 16-bit variants
will also lead to wrong delta calculation. Hence, this mask should
correspond to timer counter width, and above function just returns
the raw value of timer counter register.

Fixes: bfa76bb12f23 ("clocksource: sh_cmt: Request IRQ for clock event device only")
Fixes: 37e7742c55ba ("clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines")
Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/clocksource/sh_cmt.c | 30 ++++++++++++++++++------------
 1 file changed, 18 insertions(+), 12 deletions(-)

diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index c98f8851fd680454..cadd09ad1a0946b9 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -578,7 +578,8 @@ static int sh_cmt_start(struct sh_cmt_channel *ch, unsigned long flag)
 	ch->flags |= flag;
 
 	/* setup timeout if no clockevent */
-	if ((flag == FLAG_CLOCKSOURCE) && (!(ch->flags & FLAG_CLOCKEVENT)))
+	if (ch->cmt->num_channels == 1 &&
+	    flag == FLAG_CLOCKSOURCE && (!(ch->flags & FLAG_CLOCKEVENT)))
 		__sh_cmt_set_next(ch, ch->max_match_value);
  out:
 	raw_spin_unlock_irqrestore(&ch->lock, flags);
@@ -620,20 +621,25 @@ static struct sh_cmt_channel *cs_to_sh_cmt(struct clocksource *cs)
 static u64 sh_cmt_clocksource_read(struct clocksource *cs)
 {
 	struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
-	unsigned long flags;
 	u32 has_wrapped;
-	u64 value;
-	u32 raw;
 
-	raw_spin_lock_irqsave(&ch->lock, flags);
-	value = ch->total_cycles;
-	raw = sh_cmt_get_counter(ch, &has_wrapped);
+	if (ch->cmt->num_channels == 1) {
+		unsigned long flags;
+		u64 value;
+		u32 raw;
 
-	if (unlikely(has_wrapped))
-		raw += ch->match_value + 1;
-	raw_spin_unlock_irqrestore(&ch->lock, flags);
+		raw_spin_lock_irqsave(&ch->lock, flags);
+		value = ch->total_cycles;
+		raw = sh_cmt_get_counter(ch, &has_wrapped);
 
-	return value + raw;
+		if (unlikely(has_wrapped))
+			raw += ch->match_value + 1;
+		raw_spin_unlock_irqrestore(&ch->lock, flags);
+
+		return value + raw;
+	}
+
+	return sh_cmt_get_counter(ch, &has_wrapped);
 }
 
 static int sh_cmt_clocksource_enable(struct clocksource *cs)
@@ -696,7 +702,7 @@ static int sh_cmt_register_clocksource(struct sh_cmt_channel *ch,
 	cs->disable = sh_cmt_clocksource_disable;
 	cs->suspend = sh_cmt_clocksource_suspend;
 	cs->resume = sh_cmt_clocksource_resume;
-	cs->mask = CLOCKSOURCE_MASK(sizeof(u64) * 8);
+	cs->mask = CLOCKSOURCE_MASK(ch->cmt->info->width);
 	cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
 
 	dev_info(&ch->cmt->pdev->dev, "ch%u: used as clock source\n",
-- 
2.31.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2021-08-26 16:25 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-22 12:34 [PATCH] clocksource: sh_cmt: Fix wrong setting if don't request IRQ for clock source channel Niklas Söderlund
2021-06-10 12:45 ` Daniel Lezcano
2021-06-11  7:56   ` Niklas Söderlund
2021-08-11 14:06     ` Wolfram Sang
2021-08-26 16:25 ` [tip: timers/core] clocksource/drivers/sh_cmt: " tip-bot2 for Phong Hoang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).