LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Linux PCI <linux-pci@vger.kernel.org>,
	Linux ACPI <linux-acpi@vger.kernel.org>,
	Linux PM <linux-pm@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>,
	Bjorn Helgaas <helgaas@kernel.org>,
	Kai-Heng Feng <kai.heng.feng@canonical.com>,
	Utkarsh H Patel <utkarsh.h.patel@intel.com>,
	Koba Ko <koba.ko@canonical.com>
Subject: Re: [RFT][PATCH] PCI: PM: Add special case handling for PCIe device wakeup
Date: Tue, 27 Jul 2021 13:55:51 +0300	[thread overview]
Message-ID: <YP/mN6kSwMPWW+Mn@lahna> (raw)
In-Reply-To: <5475468.DvuYhMxLoT@kreacher>

Hi Rafael,

On Mon, Jul 12, 2021 at 07:06:47PM +0200, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> Some PCIe devices only support PME (Power Management Event) from
> D3cold.  One example is the ASMedia xHCI controller:
> 
>  11:00.0 USB controller: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller (prog-if 30 [XHCI])
>    ...
>    Capabilities: [78] Power Management version 3
>            Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
>            Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> 
> In those cases, if the device is expected to generate wakeup events
> from its final power state, pci_target_state() returns D0, which
> prevents the PCIe port the device is connected to from entering any
> low-power states too.  However, if the device were allowed to go into
> D3hot, its parent PCIe port would also be able to go into D3 and if
> it goes into D3cold, it would cause the endpoint device to end up in
> D3cold too (as per the PCI PM spec v1.2, Table 6-1), in which case
> the endpoint would be able to signal PME.  This means that the system
> could be put into a lower-power configuration without sacrificing the
> the given device's ability to generate PME.
> 
> In order to avoid missing that opportunity, extend pci_pme_capable()
> to check the device's parent in the special case when the target
> state is D3hot and the device can only signal PME from D3cold and
> update pci_target_state() to return the current target state if
> pci_pme_capable() returns 'true' for it.

Thanks a lot for this!

I tried the patch and unfortunately it does not solve the issue but I
think I know what the problem is, see below.

> Link: https://lore.kernel.org/linux-pm/20210617123653.58640-1-mika.westerberg@linux.intel.com
> Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> Reported-by: Utkarsh H Patel <utkarsh.h.patel@intel.com>
> Reported-by: Koba Ko <koba.ko@canonical.com>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
> 
> Hi,
> 
> Anyone who can reproduce the problem described in the changelog,
> please test the patch and let me know the result.
> 
> Thanks!
> 
> ---
>  drivers/pci/pci.c |   38 ++++++++++++++++++++++++++------------
>  1 file changed, 26 insertions(+), 12 deletions(-)
> 
> Index: linux-pm/drivers/pci/pci.c
> ===================================================================
> --- linux-pm.orig/drivers/pci/pci.c
> +++ linux-pm/drivers/pci/pci.c
> @@ -2298,10 +2298,29 @@ void pci_pme_wakeup_bus(struct pci_bus *
>   */
>  bool pci_pme_capable(struct pci_dev *dev, pci_power_t state)
>  {
> +	struct pci_dev *parent;
> +
>  	if (!dev->pm_cap)
>  		return false;
>  
> -	return !!(dev->pme_support & (1 << state));
> +	if (dev->pme_support & (1 << state))
> +		return true;
> +
> +	/*
> +	 * Special case: The target state is D3hot and the device only supports
> +	 * signaling PME from D3cold, but it is a PCIe device whose parent port
> +	 * can go into D3cold.  In that case, if the device is allowed to go
> +	 * into D3hot, the parent port can go into D3cold which will cause the
> +	 * device to end up in D3cold, so it will be able to signal PME from the
> +	 * final state.
> +	 */
> +	if (state != PCI_D3hot || !(dev->pme_support & (1 << PCI_D3cold)))
> +		return false;
> +
> +	parent = dev->bus->self;
> +	return pci_bridge_d3_possible(parent) &&
> +		platform_pci_power_manageable(parent) &&

Here. We cannot assume that the parent has ACPI node either. For
instance when PCIe is tunneled over TBT/USB4 there can be several PCIe
switches between the problem endpoint and the root port (which has the
ACPI node of course). I think the safe assumption is to check for the
root port and whether platform_pci_power_manageable() returns true for
it but I may be missing something.

> +		platform_pci_choose_state(parent) == PCI_D3cold;
>  }
>  EXPORT_SYMBOL(pci_pme_capable);
>  
> @@ -2595,17 +2614,12 @@ static pci_power_t pci_target_state(stru
>  	if (dev->current_state == PCI_D3cold)
>  		target_state = PCI_D3cold;
>  
> -	if (wakeup) {
> -		/*
> -		 * Find the deepest state from which the device can generate
> -		 * PME#.
> -		 */
> -		if (dev->pme_support) {
> -			while (target_state
> -			      && !(dev->pme_support & (1 << target_state)))
> -				target_state--;
> -		}
> -	}
> +	if (!wakeup || !dev->pme_support || pci_pme_capable(dev, target_state))
> +		return target_state;
> +
> +	/* Find the deepest state from which the device can generate PME#. */
> +	while (target_state && !(dev->pme_support & (1 << target_state)))
> +		target_state--;
>  
>  	return target_state;
>  }
> 
> 

  reply	other threads:[~2021-07-27 10:56 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-12 17:06 Rafael J. Wysocki
2021-07-27 10:55 ` Mika Westerberg [this message]
2021-07-27 13:18   ` Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YP/mN6kSwMPWW+Mn@lahna \
    --to=mika.westerberg@linux.intel.com \
    --cc=helgaas@kernel.org \
    --cc=kai.heng.feng@canonical.com \
    --cc=koba.ko@canonical.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=utkarsh.h.patel@intel.com \
    --subject='Re: [RFT][PATCH] PCI: PM: Add special case handling for PCIe device wakeup' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).