LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: shruthi.sanil@intel.com
Cc: daniel.lezcano@linaro.org, tglx@linutronix.de,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	andriy.shevchenko@linux.intel.com, kris.pan@linux.intel.com,
	mgross@linux.intel.com, srikanth.thokala@intel.com,
	lakshmi.bai.raja.subramanian@intel.com,
	mallikarjunappa.sangannavar@intel.com
Subject: Re: [PATCH v5 1/2] dt-bindings: timer: Add bindings for Intel Keem Bay SoC Timer
Date: Mon, 2 Aug 2021 16:43:40 -0600	[thread overview]
Message-ID: <YQh1HMMkJyO8g/RP@robh.at.kernel.org> (raw)
In-Reply-To: <20210729053937.20281-2-shruthi.sanil@intel.com>

On Thu, Jul 29, 2021 at 11:09:36AM +0530, shruthi.sanil@intel.com wrote:
> From: Shruthi Sanil <shruthi.sanil@intel.com>
> 
> Add Device Tree bindings for the Timer IP, which can be used as
> clocksource and clockevent device in the Intel Keem Bay SoC.
> 
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
> Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com>
> ---
>  .../bindings/timer/intel,keembay-timer.yaml   | 166 ++++++++++++++++++
>  1 file changed, 166 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml
> 
> diff --git a/Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml b/Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml
> new file mode 100644
> index 000000000000..b2eb2459d09b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml
> @@ -0,0 +1,166 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/timer/intel,keembay-timer.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Intel Keem Bay SoC Timers
> +
> +maintainers:
> +  - Shruthi Sanil <shruthi.sanil@intel.com>
> +
> +description: |
> +  The Intel Keem Bay timer driver supports 1 free running counter and 8 timers.
> +  Each timer is capable of generating inividual interrupt.
> +  Both the features are enabled through the timer general config register.
> +
> +  The parent node represents the common general configuration details and
> +  the child nodes represents the counter and timers.
> +
> +properties:

You need a 'compatible' here. Otherwise, how does one know what 
'reg' contains. Also, without it, this schema will never be applied.

> +  reg:
> +    description: General configuration register address and length.
> +    maxItems: 1
> +
> +  ranges: true
> +
> +  "#address-cells":
> +    const: 2
> +
> +  "#size-cells":
> +    const: 2
> +
> +required:
> +  - reg
> +  - ranges
> +  - "#address-cells"
> +  - "#size-cells"
> +
> +patternProperties:
> +  "^counter@[0-9a-f]+$":
> +    type: object
> +    description: Properties for Intel Keem Bay counter
> +
> +    properties:
> +      compatible:
> +        enum:
> +          - intel,keembay-counter
> +
> +      reg:
> +        maxItems: 1
> +
> +      clocks:
> +        maxItems: 1
> +
> +    required:
> +      - compatible
> +      - reg
> +      - clocks
> +
> +  "^timer@[0-9a-f]+$":
> +    type: object
> +    description: Properties for Intel Keem Bay timer
> +
> +    properties:
> +      compatible:
> +        enum:
> +          - intel,keembay-timer
> +
> +      reg:
> +        maxItems: 1
> +
> +      interrupts:
> +        maxItems: 1
> +
> +      clocks:
> +        maxItems: 1
> +
> +    required:
> +      - compatible
> +      - reg
> +      - interrupts
> +      - clocks
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #define KEEM_BAY_A53_TIM
> +
> +    soc {
> +        #address-cells = <0x2>;
> +        #size-cells = <0x2>;
> +
> +        gpt@20331000 {
> +            reg = <0x0 0x20331000 0x0 0xc>;
> +            ranges = <0x0 0x0 0x20330000 0xF0>;
> +            #address-cells = <0x1>;
> +            #size-cells = <0x1>;
> +
> +            counter@e8 {
> +                compatible = "intel,keembay-counter";
> +                reg = <0xe8 0x8>;
> +                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
> +            };
> +
> +            timer@10 {
> +                compatible = "intel,keembay-timer";
> +                reg = <0x10 0xc>;
> +                interrupts = <GIC_SPI 0x3 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
> +            };
> +
> +            timer@20 {
> +                compatible = "intel,keembay-timer";
> +                reg = <0x20 0xc>;
> +                interrupts = <GIC_SPI 0x4 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
> +            };
> +
> +            timer@30 {
> +                compatible = "intel,keembay-timer";
> +                reg = <0x30 0xc>;
> +                interrupts = <GIC_SPI 0x5 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
> +            };
> +
> +            timer@40 {
> +                compatible = "intel,keembay-timer";
> +                reg = <0x40 0xc>;
> +                interrupts = <GIC_SPI 0x6 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
> +            };
> +
> +            timer@50 {
> +                compatible = "intel,keembay-timer";
> +                reg = <0x50 0xc>;
> +                interrupts = <GIC_SPI 0x7 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
> +            };
> +
> +            timer@60 {
> +                compatible = "intel,keembay-timer";
> +                reg = <0x60 0xc>;
> +                interrupts = <GIC_SPI 0x8 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
> +            };
> +
> +            timer@70 {
> +                compatible = "intel,keembay-timer";
> +                reg = <0x70 0xc>;
> +                interrupts = <GIC_SPI 0x9 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
> +            };
> +
> +            timer@80 {
> +                compatible = "intel,keembay-timer";
> +                reg = <0x80 0xc>;
> +                interrupts = <GIC_SPI 0xa IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
> +            };
> +        };
> +    };
> +
> +...
> -- 
> 2.17.1
> 
> 

  reply	other threads:[~2021-08-02 22:43 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-29  5:39 [PATCH v5 0/2] Add the driver for Intel Keem Bay SoC timer block shruthi.sanil
2021-07-29  5:39 ` [PATCH v5 1/2] dt-bindings: timer: Add bindings for Intel Keem Bay SoC Timer shruthi.sanil
2021-08-02 22:43   ` Rob Herring [this message]
2021-08-04  5:25     ` Sanil, Shruthi
2021-08-04  7:38       ` Andy Shevchenko
2021-08-12 16:49         ` Sanil, Shruthi
2021-08-23  6:02           ` Sanil, Shruthi
2021-07-29  5:39 ` [PATCH v5 2/2] clocksource: Add Intel Keem Bay timer support shruthi.sanil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YQh1HMMkJyO8g/RP@robh.at.kernel.org \
    --to=robh@kernel.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kris.pan@linux.intel.com \
    --cc=lakshmi.bai.raja.subramanian@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mallikarjunappa.sangannavar@intel.com \
    --cc=mgross@linux.intel.com \
    --cc=shruthi.sanil@intel.com \
    --cc=srikanth.thokala@intel.com \
    --cc=tglx@linutronix.de \
    --subject='Re: [PATCH v5 1/2] dt-bindings: timer: Add bindings for Intel Keem Bay SoC Timer' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).