LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: linuxarm@huawei.com, mauro.chehab@huawei.com,
	Yu Chen <chenyu56@huawei.com>,
	John Stultz <john.stultz@linaro.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] dt-bindings: misc: add schema for USB hub on Kirin devices
Date: Fri, 13 Aug 2021 13:52:45 -0500	[thread overview]
Message-ID: <YRa/fURTp8QncIEZ@robh.at.kernel.org> (raw)
In-Reply-To: <d428b90bb655c7992e9e13fc50130ed223812d2d.1628159456.git.mchehab+huawei@kernel.org>

On Thu, Aug 05, 2021 at 12:31:00PM +0200, Mauro Carvalho Chehab wrote:
> From: Yu Chen <chenyu56@huawei.com>
> 
> This patch adds binding documentation to support USB HUB and
> USB data role switch of HiSilicon HiKey960 and HiKey970 boards.

Like PCIe, there's a standard way to describe USB devices in DT. Though 
PCI is easy compared to USB. :(

Also like PCIe on Hikey, I'm less than thrilled to define how this 
should look for a board that's generally not widely available or well 
supported.

> 
> [mchehab: updated OF names and added support for HiKey970]
> Signed-off-by: Yu Chen <chenyu56@huawei.com>
> Signed-off-by: John Stultz <john.stultz@linaro.org>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  .../bindings/misc/hisilicon,hikey-usb.yaml    | 95 +++++++++++++++++++
>  1 file changed, 95 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml
> 
> diff --git a/Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml b/Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml
> new file mode 100644
> index 000000000000..857f9bd802fe
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml
> @@ -0,0 +1,95 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2019 Linaro Ltd.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/misc/hisilicon,hikey-usb.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HiKey960/970 onboard USB GPIO Hub
> +
> +maintainers:
> +  - John Stultz <john.stultz@linaro.org>
> +
> +description: |
> +  Supports the onboard USB GPIO hub found on HiKey960/970.
> +  The HUB, which acts as a role-switch intermediary to detect the state of
> +  the USB-C port, to switch the hub into dual-role USB-C or host mode,
> +  which enables the onboard USB-A host ports.
> +
> +  Schematics about the hub can be found here:
> +    https://github.com/96boards/documentation/raw/master/consumer/hikey/hikey960/hardware-docs/HiKey960_Schematics.pdf
> +    https://www.96boards.org/documentation/consumer/hikey/hikey970/hardware-docs/files/hikey970-schematics.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - hisilicon,gpio_hubv1
> +      - hisilicon,kirin970_hikey_usbhub

s/_/-/

Why is one compatible pretty generic and the other very specific?

> +
> +  typec-vbus:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description: phandle to the typec-vbus gpio

If a GPIO, why is it not using a GPIO DT property?

> +
> +  otg-switch:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description: phandle to the otg-switch gpio

Ditto?

> +
> +  hub-vdd33-en:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description: phandle to the hub 3.3v power enablement gpio

GPIOs controlling a power rail should use a gpio-regulator.

> +
> +  hub_reset_en_gpio:

s/_/-/

And still, not a GPIO DT property...

> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: phandle to the hub reset gpio
> +
> +  usb-role-switch:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: Support role switch.
> +
> +  hub-vdd-supply:
> +    description: regulator for hub power
> +
> +  port:
> +    description: |
> +      any connector to the data bus of this controller should be modelled
> +      using the OF graph bindings specified, if the "usb-role-switch"
> +      property is used. Note for this driver, two ports are supported,
> +      the first being the endpoint that will be notified by this driver,
> +      and the second being the endpoint that notifies this driver of a
> +      role switch.

You're describing this in terms of driver connections rather than h/w 
connections.

But we've already got ways to describe the data connections. For 
starters, it should be a child of the USB host.

And how does all this tie in with the USB connector binding?

> +
> +
> +required:
> +  - compatible
> +  - typec-vbus
> +  - otg-switch
> +  - usb-role-switch
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    hisi_hikey_usb: hisi_hikey_usb {
> +        compatible = "hisilicon,gpio_hubv1";
> +        typec-vbus = <&gpio25 2 GPIO_ACTIVE_HIGH>;
> +        otg-switch = <&gpio25 6 GPIO_ACTIVE_HIGH>;
> +        hub-vdd33-en = <&gpio5 6 GPIO_ACTIVE_HIGH>;
> +        usb-role-switch;
> +
> +        port {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            hikey_usb_ep0: endpoint@0 {
> +                reg = <0>;
> +                remote-endpoint = <&dwc3_role_switch>;
> +            };
> +            hikey_usb_ep1: endpoint@1 {
> +                reg = <1>;
> +                remote-endpoint = <&rt1711h_ep>;
> +            };
> +        };
> +    };
> -- 
> 2.31.1
> 
> 

  reply	other threads:[~2021-08-13 18:52 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-05 10:31 Mauro Carvalho Chehab
2021-08-13 18:52 ` Rob Herring [this message]
2021-08-14  6:58   ` Mauro Carvalho Chehab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YRa/fURTp8QncIEZ@robh.at.kernel.org \
    --to=robh@kernel.org \
    --cc=chenyu56@huawei.com \
    --cc=devicetree@vger.kernel.org \
    --cc=john.stultz@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=mauro.chehab@huawei.com \
    --cc=mchehab+huawei@kernel.org \
    --subject='Re: [PATCH] dt-bindings: misc: add schema for USB hub on Kirin devices' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).