Re: [PATCH 2/8] dt-bindings: serial: fsl-linflexuart: convert to json-schema format

[Rob Herring <robh@kernel.org>]

On Fri, Aug 13, 2021 at 07:43:17PM +0800, Chester Lin wrote:
> On Fri, Aug 13, 2021 at 01:28:40PM +0200, Krzysztof Kozlowski wrote:
> > On 13/08/2021 13:11, Chester Lin wrote:
> > > Hi Andreas,
> > > 
> > > On Thu, Aug 12, 2021 at 06:04:44PM +0200, Andreas Färber wrote:
> > >> On 05.08.21 08:54, Chester Lin wrote:
> > >>> Convert the FSL LINFlexD UART binding to json-schema.
> > >>>
> > >>> Signed-off-by: Chester Lin <clin@suse.com>
> > >>> ---
> > >>>  .../bindings/serial/fsl,s32-linflexuart.txt   | 22 ---------
> > >>>  .../bindings/serial/fsl,s32-linflexuart.yaml  | 48 +++++++++++++++++++
> > >>>  2 files changed, 48 insertions(+), 22 deletions(-)
> > >>>  delete mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt
> > >>>  create mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
> > >>
> > >> Thanks for your effort, Chester.
> > >>
> > >>> diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt
> > >>> deleted file mode 100644
> > >>> index f1bbe0826be5..000000000000
> > >>> --- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt
> > >>> +++ /dev/null
> > >>> @@ -1,22 +0,0 @@
> > >>> -* Freescale LINFlexD UART
> > >>> -
> > >>> -The LINFlexD controller implements several LIN protocol versions, as well as
> > >>> -support for full-duplex UART communication through 8-bit and 9-bit frames.
> > >>> -
> > >>> -See chapter 47 ("LINFlexD") in the reference manual[1].
> > >>> -
> > >>> -Required properties:
> > >>> -- compatible :
> > >>> -  - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which
> > >>> -    is compatible with the one integrated on S32V234 SoC
> > >>> -- reg : Address and length of the register set for the device
> > >>> -- interrupts : Should contain uart interrupt
> > >>> -
> > >>> -Example:
> > >>> -uart0: serial@40053000 {
> > >>> -	compatible = "fsl,s32v234-linflexuart";
> > >>> -	reg = <0x0 0x40053000 0x0 0x1000>;
> > >>> -	interrupts = <0 59 4>;
> > >>> -};
> > >>> -
> > >>> -[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM
> > >>> diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
> > >>> new file mode 100644
> > >>> index 000000000000..acfe34706ccb
> > >>> --- /dev/null
> > >>> +++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
> > >>> @@ -0,0 +1,48 @@
> > >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > >>
> > >> Since this is dual-licensed and BSD-2-Clause would seem compatible with
> > >> GPLv3, this could probably be s/GPL-2.0-only/GPL-2.0-or-later/ ? Not a
> > >> blocker.
> > > 
> > > There's no license identifier in the original file so it's not a problem to
> > > choose "GPL-2.0-or-later".
> > 
> > That is not entirely correct. If there is no explicit license in the
> > file, it's kernel's default so GPL-2.0-only. You cannot relicense
> > derivative work without getting permission from authors and copyright
> > holders.
> > 
> > However if you did not copy the text/description from original bindings,
> > your work won't be derivative so you can relicense it.
> > 
> 
> Sorry for my misunderstanding and thanks for the reminder.

TBC, please try and get permission to relicense. The single author was 
from NXP so changing the license here just needs the okay from any NXP 
employee.

But use 'GPL-2.0-only' not 'GPL-2.0-or-later' please. As gregkh says,
are you okay with GPLv4, v5, etc.?

Rob