LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Reinhard Speyerer <rspmn@arcor.de>
To: Slark Xiao <slark_xiao@163.com>
Cc: johan@kernel.org, gregkh@linuxfoundation.org,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] [V2,1/1]USB: serial: option: add Foxconn T77W175 composition 0x901d
Date: Mon, 16 Aug 2021 11:04:00 +0200 [thread overview]
Message-ID: <YRoqAJmGBpV/OuZL@arcor.de> (raw)
In-Reply-To: <20210816035404.4210-1-slark_xiao@163.com>
On Mon, Aug 16, 2021 at 11:54:04AM +0800, Slark Xiao wrote:
> Foxconn SDX55 T77W175 device is working in PCIe mode normally.
> You can find the PCIe support in drivers/bus/mhi/pci_generic.c file.
> But in some scenario, we need to capture the memory dump once it crashed.
> So a diag port under USB driver is needed.
>
> Only interface 0 is used:
> jbd@jbd-ThinkPad-P1-Gen-4:~$ lsusb | grep 05c6
> Bus 003 Device 010: ID 05c6:901d Qualcomm, Inc. Generic Mobile Broadband Adapter
> jbd@jbd-ThinkPad-P1-Gen-4:~$ lsusb -t | grep "Dev 10"
> |__ Port 7: Dev 10, If 0, Class=Vendor Specific Class, Driver=option, 480M
>
> Signed-off-by: Slark Xiao <slark_xiao@163.com>
> ---
> drivers/usb/serial/option.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> index 039450069ca4..c275f489c1cc 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -2068,6 +2068,7 @@ static const struct usb_device_id option_ids[] = {
> .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
> { USB_DEVICE(0x0489, 0xe0b5), /* Foxconn T77W968 ESIM */
> .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
> + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x901d) }, /* Foxconn T77W175 PCIE+USB mode*/
> { USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 (IOT version) */
> .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
> { USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */
> --
> 2.25.1
>
>
Hi Slark,
since this entry uses the Qualcomm USB VID it would be a good idea to make
the option driver only bind to the DIAG interface in case other UE vendors
have the ADB interface provided by this composition enabled:
$ sed 30q 901D
#!/bin/sh
#
# Copyright (c) 2014,2017-2018, The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# * Neither the name of The Linux Foundation nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE DISCLAIMED. IN NO
# EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# DESCRIPTION: DIAG + ADB
echo "Switching to composition number 0x901D" > /dev/kmsg
[Ideally these compositions would also be available via kernel.org and/or
codeaura.org but so far I have been unable to find them there.]
Regards,
Reinhard
next prev parent reply other threads:[~2021-08-16 9:06 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-16 3:54 Slark Xiao
2021-08-16 9:04 ` Reinhard Speyerer [this message]
2021-08-16 9:17 ` Slark Xiao
2021-08-16 9:20 ` Greg KH
2021-08-16 9:25 ` Slark Xiao
2021-08-16 11:17 ` Greg KH
2021-08-17 2:27 ` Slark Xiao
2021-08-17 6:33 ` Greg KH
2021-08-17 6:51 ` Slark Xiao
2021-08-16 15:47 ` Reinhard Speyerer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YRoqAJmGBpV/OuZL@arcor.de \
--to=rspmn@arcor.de \
--cc=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=slark_xiao@163.com \
--subject='Re: [PATCH] [V2,1/1]USB: serial: option: add Foxconn T77W175 composition 0x901d' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).