LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Matthias Kaehlcke <mka@chromium.org>
To: Sankeerth Billakanti <sbillaka@codeaurora.org>
Cc: dri-devel@lists.freedesktop.org, linux-arm-msm@vger.kernel.org,
	freedreno@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	robdclark@gmail.com, seanpaul@chromium.org, swboyd@chromium.org,
	kalyan_t@codeaurora.org, abhinavk@codeaurora.org,
	dianders@chromium.org, khsieh@codeaurora.org,
	mkrishn@codeaurora.org
Subject: Re: [PATCH v1 1/2] drm/msm/dp: Add support for SC7280 eDP
Date: Mon, 16 Aug 2021 10:51:58 -0700	[thread overview]
Message-ID: <YRqlvuBPlcm/0r4s@google.com> (raw)
In-Reply-To: <1628726882-27841-2-git-send-email-sbillaka@codeaurora.org>

On Thu, Aug 12, 2021 at 05:38:01AM +0530, Sankeerth Billakanti wrote:
> The eDP controller on SC7280 is similar to the eDP/DP controllers
> supported by the current driver implementation.
> 
> SC7280 supports one EDP and one DP controller which can operate
> concurrently.
> 
> The following are some required changes for the sc7280 sink:
> 1. Additional gpio configuration for backlight and pwm via pmic.
> 2. ASSR support programming on the sink.
> 3. SSC support programming on the sink.
> 
> Signed-off-by: Sankeerth Billakanti <sbillaka@codeaurora.org>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c |  4 ++--
>  drivers/gpu/drm/msm/dp/dp_ctrl.c               | 19 +++++++++++++++
>  drivers/gpu/drm/msm/dp/dp_display.c            | 32 ++++++++++++++++++++++++--
>  drivers/gpu/drm/msm/dp/dp_parser.c             | 31 +++++++++++++++++++++++++
>  drivers/gpu/drm/msm/dp/dp_parser.h             |  5 ++++
>  5 files changed, 87 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index b131fd37..1096c44 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -856,9 +856,9 @@ static const struct dpu_intf_cfg sm8150_intf[] = {
>  };
>  
>  static const struct dpu_intf_cfg sc7280_intf[] = {
> -	INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
> +	INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, 1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
>  	INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> -	INTF_BLK("intf_5", INTF_5, 0x39000, INTF_EDP, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
> +	INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
>  };
>  
>  /*************************************************************
> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> index d2569da..06d5a2d 100644
> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> @@ -1244,7 +1244,9 @@ static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl,
>  		struct dp_cr_status *cr, int *training_step)
>  {
>  	int ret = 0;
> +	u8 *dpcd = ctrl->panel->dpcd;
>  	u8 encoding = DP_SET_ANSI_8B10B;
> +	u8 ssc = 0, assr = 0;
>  	struct dp_link_info link_info = {0};
>  
>  	dp_ctrl_config_ctrl(ctrl);
> @@ -1254,9 +1256,21 @@ static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl,
>  	link_info.capabilities = DP_LINK_CAP_ENHANCED_FRAMING;
>  
>  	dp_aux_link_configure(ctrl->aux, &link_info);
> +
> +	if (dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5) {
> +		ssc = DP_SPREAD_AMP_0_5;
> +		drm_dp_dpcd_write(ctrl->aux, DP_DOWNSPREAD_CTRL, &ssc, 1);
> +	}
> +
>  	drm_dp_dpcd_write(ctrl->aux, DP_MAIN_LINK_CHANNEL_CODING_SET,
>  				&encoding, 1);
>  
> +	if (dpcd[DP_EDP_CONFIGURATION_CAP] & DP_ALTERNATE_SCRAMBLER_RESET_CAP) {
> +		assr = DP_ALTERNATE_SCRAMBLER_RESET_ENABLE;
> +		drm_dp_dpcd_write(ctrl->aux, DP_EDP_CONFIGURATION_SET,
> +				&assr, 1);
> +	}
> +
>  	ret = dp_ctrl_link_train_1(ctrl, cr, training_step);
>  	if (ret) {
>  		DRM_ERROR("link training #1 failed. ret=%d\n", ret);
> @@ -1328,9 +1342,11 @@ static int dp_ctrl_enable_mainlink_clocks(struct dp_ctrl_private *ctrl)
>  	struct dp_io *dp_io = &ctrl->parser->io;
>  	struct phy *phy = dp_io->phy;
>  	struct phy_configure_opts_dp *opts_dp = &dp_io->phy_opts.dp;
> +	u8 *dpcd = ctrl->panel->dpcd;
>  
>  	opts_dp->lanes = ctrl->link->link_params.num_lanes;
>  	opts_dp->link_rate = ctrl->link->link_params.rate / 100;
> +	opts_dp->ssc = dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5;
>  	dp_ctrl_set_clock_rate(ctrl, DP_CTRL_PM, "ctrl_link",
>  					ctrl->link->link_params.rate * 1000);
>  
> @@ -1760,6 +1776,9 @@ int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl)
>  	ctrl->link->link_params.num_lanes = ctrl->panel->link_info.num_lanes;
>  	ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock;
>  
> +	if (ctrl->dp_ctrl.pixel_rate == 0)
> +		return -EINVAL;
> +
>  	DRM_DEBUG_DP("rate=%d, num_lanes=%d, pixel_rate=%d\n",
>  		ctrl->link->link_params.rate,
>  		ctrl->link->link_params.num_lanes, ctrl->dp_ctrl.pixel_rate);
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index ee5bf64..a772290 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -117,8 +117,36 @@ struct dp_display_private {
>  	struct dp_audio *audio;
>  };
>  
> +struct msm_dp_config {
> +	phys_addr_t io_start[3];
> +	size_t num_dp;
> +};
> +
> +static const struct msm_dp_config sc7180_dp_cfg = {
> +	.io_start = { 0x0ae90000 },
> +	.num_dp = 1,
> +};
> +
> +static const struct msm_dp_config sc8180x_dp_cfg = {
> +	.io_start = { 0xae90000, 0xae98000, 0 },
> +	.num_dp = 3,
> +};
> +
> +static const struct msm_dp_config sc8180x_edp_cfg = {
> +	.io_start = { 0, 0, 0xae9a000 },
> +	.num_dp = 3,
> +};
> +
> +static const struct msm_dp_config sc7280_edp_cfg = {
> +	.io_start = { 0xaea0000, 0 },
> +	.num_dp = 2,
> +};

This data isn't used anywhere, is there some patch missing?

And in case it is used (at some point), shouldn't at least the 'io_start'
addresses be specified in the device tree rather than the driver?

> +
>  static const struct of_device_id dp_dt_match[] = {
> -	{.compatible = "qcom,sc7180-dp"},
> +	{ .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_cfg },
> +	{ .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_cfg },
> +	{ .compatible = "qcom,sc8180x-edp", .data = &sc8180x_edp_cfg },
> +	{ .compatible = "qcom,sc7280-edp", .data = &sc7280_edp_cfg },
>  	{}
>  };
>  
> @@ -1408,7 +1436,7 @@ void msm_dp_irq_postinstall(struct msm_dp *dp_display)
>  
>  	dp_hpd_event_setup(dp);
>  
> -	dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 100);
> +	dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 1);
>  }
>  
>  void msm_dp_debugfs_init(struct msm_dp *dp_display, struct drm_minor *minor)
> diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c b/drivers/gpu/drm/msm/dp/dp_parser.c
> index 0519dd3..c05fc0a 100644
> --- a/drivers/gpu/drm/msm/dp/dp_parser.c
> +++ b/drivers/gpu/drm/msm/dp/dp_parser.c
> @@ -248,6 +248,33 @@ static int dp_parser_clock(struct dp_parser *parser)
>  	return 0;
>  }
>  
> +static int dp_parser_gpio(struct dp_parser *parser)
> +{
> +	struct device *dev = &parser->pdev->dev;
> +	int ret;
> +
> +	parser->panel_bklt_gpio = devm_gpiod_get(dev, "panel-bklt",
> +			GPIOD_OUT_HIGH);
> +	if (IS_ERR(parser->panel_bklt_gpio)) {
> +		ret = PTR_ERR(parser->panel_bklt_gpio);
> +		parser->panel_bklt_gpio = NULL;
> +		DRM_ERROR("%s: cannot get panel-bklt gpio, %d\n", __func__, ret);
> +		goto fail;
> +	}
> +
> +	parser->panel_pwm_gpio = devm_gpiod_get(dev, "panel-pwm", GPIOD_OUT_HIGH);
> +	if (IS_ERR(parser->panel_pwm_gpio)) {
> +		ret = PTR_ERR(parser->panel_pwm_gpio);
> +		parser->panel_pwm_gpio = NULL;
> +		DRM_ERROR("%s: cannot get panel-pwm gpio, %d\n", __func__, ret);
> +		goto fail;
> +	}

Just setting the GPIOs to high on initialization and then leaving them
unattended doesn't look right. I saw Stephen already pointed towards
drivers/video/backlight/pwm_bl.c.

> +
> +	DRM_INFO("gpio on");
> +fail:
> +	return 0;

This function always returns 0, either the return type should be void, or it
should return a different value in the error case

> +}
> +
>  static int dp_parser_parse(struct dp_parser *parser)
>  {
>  	int rc = 0;
> @@ -269,6 +296,10 @@ static int dp_parser_parse(struct dp_parser *parser)
>  	if (rc)
>  		return rc;
>  
> +	rc = dp_parser_gpio(parser);
> +	if (rc)
> +		return rc;

The function never returns a non-zero value (see above).

  parent reply	other threads:[~2021-08-16 17:52 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-12  0:08 [PATCH v1 0/2] Add support for eDP on SC7280 Sankeerth Billakanti
2021-08-12  0:08 ` [PATCH v1 1/2] drm/msm/dp: Add support for SC7280 eDP Sankeerth Billakanti
2021-08-12  0:41   ` Stephen Boyd
2021-08-13  0:28     ` sbillaka
2021-08-25 23:11       ` Bjorn Andersson
2021-08-16 17:51   ` Matthias Kaehlcke [this message]
2021-09-14  3:53   ` Stephen Boyd
2021-08-12  0:08 ` [PATCH v1 2/2] dt-bindings: Add SC7280 compatible string Sankeerth Billakanti
2021-08-12  0:31   ` Stephen Boyd
2021-08-16 18:01   ` Matthias Kaehlcke
2021-08-24 23:07   ` Doug Anderson
2021-08-25 17:50   ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YRqlvuBPlcm/0r4s@google.com \
    --to=mka@chromium.org \
    --cc=abhinavk@codeaurora.org \
    --cc=dianders@chromium.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=kalyan_t@codeaurora.org \
    --cc=khsieh@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mkrishn@codeaurora.org \
    --cc=robdclark@gmail.com \
    --cc=sbillaka@codeaurora.org \
    --cc=seanpaul@chromium.org \
    --cc=swboyd@chromium.org \
    --subject='Re: [PATCH v1 1/2] drm/msm/dp: Add support for SC7280 eDP' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).