LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SM6350 pinctrl bindings
@ 2021-08-28 17:23 Konrad Dybcio
  2021-08-28 17:23 ` [PATCH v3 2/2] pinctrl: qcom: Add SM6350 pinctrl driver Konrad Dybcio
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Konrad Dybcio @ 2021-08-28 17:23 UTC (permalink / raw)
  To: ~postmarketos/upstreaming
  Cc: martin.botka, angelogioacchino.delregno, marijn.suijten,
	jamipkettunen, Konrad Dybcio, Andy Gross, Bjorn Andersson,
	Linus Walleij, Rob Herring, linux-arm-msm, linux-gpio,
	devicetree, linux-kernel

Add device tree binding Documentation details for Qualcomm SM6350
pinctrl driver.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
Changes since v2:
- Tweak the regex to match gpio0-gpio157

 .../bindings/pinctrl/qcom,sm6350-pinctrl.yaml | 148 ++++++++++++++++++
 1 file changed, 148 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
new file mode 100644
index 000000000000..554992a681f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6350-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM6350 TLMM block
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer (TLMM) block found
+  in the SM6350 platform.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6350-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sm6350-tlmm-state"
+      - patternProperties:
+          ".*":
+            $ref: "#/$defs/qcom-sm6350-tlmm-state"
+
+$defs:
+  qcom-sm6350-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-7])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, atest_char2,
+                atest_char3, atest_tsens, atest_tsens2, atest_usb1, atest_usb10, atest_usb11,
+                atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21, atest_usb22,
+                atest_usb23, audio_ref, btfm_slimbus, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3,
+                cam_mclk4, cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+                cci_timer4, cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3,
+                dp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0, gp_pdm1, gp_pdm2, gpio,
+                gps_tx, ibi_i3c, jitter_bist, ldo_en, ldo_update, lpass_ext, m_voc, mclk,
+                mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, mi2s_1, mi2s_2,
+                mss_lte, nav_gpio, nav_pps, pa_indicator, pcie0_clk, phase_flag0, phase_flag1,
+                phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15,
+                phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
+                phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26,
+                phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31,
+                phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9,
+                pll_bist, pll_bypassnl, pll_reset, prng_rosc, qdss_cti, qdss_gpio, qdss_gpio0,
+                qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
+                qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6,
+                qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss,
+                qlink1_enable, qlink1_request, qlink1_wmss, qup00, qup01, qup02, qup10, qup11,
+                qup12, qup13_f1, qup13_f2, qup14, rffe0_clk, rffe0_data, rffe1_clk, rffe1_data,
+                rffe2_clk, rffe2_data, rffe3_clk, rffe3_data, rffe4_clk, rffe4_data, sd_write,
+                sdc1_tb, sdc2_tb, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
+                tsense_pwm2, uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
+                uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
+                wlan2_adc0, wlan2_adc1, ]
+
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        pinctrl@f100000 {
+                compatible = "qcom,sm6350-tlmm";
+                reg = <0x0f100000 0x300000>;
+                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                gpio-ranges = <&tlmm 0 0 157>;
+
+                gpio-wo-subnode-state {
+                        pins = "gpio1";
+                        function = "gpio";
+                };
+
+                uart-w-subnodes-state {
+                        rx {
+                                pins = "gpio25";
+                                function = "qup13_f2";
+                                bias-disable;
+                        };
+
+                        tx {
+                                pins = "gpio26";
+                                function = "qup13_f2";
+                                bias-disable;
+                        };
+                };
+        };
+...
-- 
2.33.0


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v3 2/2] pinctrl: qcom: Add SM6350 pinctrl driver
  2021-08-28 17:23 [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SM6350 pinctrl bindings Konrad Dybcio
@ 2021-08-28 17:23 ` Konrad Dybcio
  2021-09-13 17:23   ` Luca Weiss
  2021-08-28 18:07 ` [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SM6350 pinctrl bindings Bjorn Andersson
  2021-08-31 21:52 ` Rob Herring
  2 siblings, 1 reply; 6+ messages in thread
From: Konrad Dybcio @ 2021-08-28 17:23 UTC (permalink / raw)
  To: ~postmarketos/upstreaming
  Cc: martin.botka, angelogioacchino.delregno, marijn.suijten,
	jamipkettunen, Konrad Dybcio, Andy Gross, Bjorn Andersson,
	Linus Walleij, Rob Herring, linux-arm-msm, linux-gpio,
	devicetree, linux-kernel

This adds pincontrol driver for tlmm block found in SM6350 SoC

This patch is based on downstream copyleft code.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v2:
- Trim the forgotten-about comments
- Add Bjorn's r-b

 drivers/pinctrl/qcom/Kconfig          |    9 +
 drivers/pinctrl/qcom/Makefile         |    1 +
 drivers/pinctrl/qcom/pinctrl-sm6350.c | 1593 +++++++++++++++++++++++++
 3 files changed, 1603 insertions(+)
 create mode 100644 drivers/pinctrl/qcom/pinctrl-sm6350.c

diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index cad4e60df618..b16c90db8248 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -265,6 +265,15 @@ config PINCTRL_SM6125
 	 Qualcomm Technologies Inc TLMM block found on the Qualcomm
 	 Technologies Inc SM6125 platform.
 
+config PINCTRL_SM6350
+	tristate "Qualcomm Technologies Inc SM6350 pin controller driver"
+	depends on GPIOLIB && OF
+	depends on PINCTRL_MSM
+	help
+	 This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+	 Qualcomm Technologies Inc TLMM block found on the Qualcomm
+	 Technologies Inc SM6350 platform.
+
 config PINCTRL_SM8150
 	tristate "Qualcomm Technologies Inc SM8150 pin controller driver"
 	depends on OF
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index d696fe2789bb..c76d3d6a93b2 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_PINCTRL_SDM660)   += pinctrl-sdm660.o
 obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o
 obj-$(CONFIG_PINCTRL_SDX55) += pinctrl-sdx55.o
 obj-$(CONFIG_PINCTRL_SM6125) += pinctrl-sm6125.o
+obj-$(CONFIG_PINCTRL_SM6350) += pinctrl-sm6350.o
 obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o
 obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
 obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
diff --git a/drivers/pinctrl/qcom/pinctrl-sm6350.c b/drivers/pinctrl/qcom/pinctrl-sm6350.c
new file mode 100644
index 000000000000..f9a3528fcc09
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-sm6350.c
@@ -0,0 +1,1593 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-msm.h"
+
+#define FUNCTION(fname)			                \
+	[msm_mux_##fname] = {		                \
+		.name = #fname,				\
+		.groups = fname##_groups,               \
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+	}
+
+#define REG_SIZE 0x1000
+#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9)	\
+	{					        \
+		.name = "gpio" #id,			\
+		.pins = gpio##id##_pins,		\
+		.npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins),	\
+		.funcs = (int[]){			\
+			msm_mux_gpio, /* gpio mode */	\
+			msm_mux_##f1,			\
+			msm_mux_##f2,			\
+			msm_mux_##f3,			\
+			msm_mux_##f4,			\
+			msm_mux_##f5,			\
+			msm_mux_##f6,			\
+			msm_mux_##f7,			\
+			msm_mux_##f8,			\
+			msm_mux_##f9			\
+		},				        \
+		.nfuncs = 10,				\
+		.ctl_reg = REG_SIZE * id,			\
+		.io_reg = 0x4 + REG_SIZE * id,		\
+		.intr_cfg_reg = 0x8 + REG_SIZE * id,		\
+		.intr_status_reg = 0xc + REG_SIZE * id,	\
+		.intr_target_reg = 0x8 + REG_SIZE * id,	\
+		.mux_bit = 2,			\
+		.pull_bit = 0,			\
+		.drv_bit = 6,			\
+		.oe_bit = 9,			\
+		.in_bit = 0,			\
+		.out_bit = 1,			\
+		.intr_enable_bit = 0,		\
+		.intr_status_bit = 0,		\
+		.intr_target_bit = 5,		\
+		.intr_target_kpss_val = 3,	\
+		.intr_raw_status_bit = 4,	\
+		.intr_polarity_bit = 1,		\
+		.intr_detection_bit = 2,	\
+		.intr_detection_width = 2,	\
+	}
+
+#define SDC_PINGROUP(pg_name, ctl, pull, drv)	\
+	{					        \
+		.name = #pg_name,			\
+		.pins = pg_name##_pins,			\
+		.npins = (unsigned int)ARRAY_SIZE(pg_name##_pins),	\
+		.ctl_reg = ctl,				\
+		.io_reg = 0,				\
+		.intr_cfg_reg = 0,			\
+		.intr_status_reg = 0,			\
+		.intr_target_reg = 0,			\
+		.mux_bit = -1,				\
+		.pull_bit = pull,			\
+		.drv_bit = drv,				\
+		.oe_bit = -1,				\
+		.in_bit = -1,				\
+		.out_bit = -1,				\
+		.intr_enable_bit = -1,			\
+		.intr_status_bit = -1,			\
+		.intr_target_bit = -1,			\
+		.intr_raw_status_bit = -1,		\
+		.intr_polarity_bit = -1,		\
+		.intr_detection_bit = -1,		\
+		.intr_detection_width = -1,		\
+	}
+
+#define UFS_RESET(pg_name, offset)				\
+	{					        \
+		.name = #pg_name,			\
+		.pins = pg_name##_pins,			\
+		.npins = (unsigned int)ARRAY_SIZE(pg_name##_pins),	\
+		.ctl_reg = offset,			\
+		.io_reg = offset + 0x4,			\
+		.intr_cfg_reg = 0,			\
+		.intr_status_reg = 0,			\
+		.intr_target_reg = 0,			\
+		.mux_bit = -1,				\
+		.pull_bit = 3,				\
+		.drv_bit = 0,				\
+		.oe_bit = -1,				\
+		.in_bit = -1,				\
+		.out_bit = 0,				\
+		.intr_enable_bit = -1,			\
+		.intr_status_bit = -1,			\
+		.intr_target_bit = -1,			\
+		.intr_raw_status_bit = -1,		\
+		.intr_polarity_bit = -1,		\
+		.intr_detection_bit = -1,		\
+		.intr_detection_width = -1,		\
+	}
+static const struct pinctrl_pin_desc sm6350_pins[] = {
+	PINCTRL_PIN(0, "GPIO_0"),
+	PINCTRL_PIN(1, "GPIO_1"),
+	PINCTRL_PIN(2, "GPIO_2"),
+	PINCTRL_PIN(3, "GPIO_3"),
+	PINCTRL_PIN(4, "GPIO_4"),
+	PINCTRL_PIN(5, "GPIO_5"),
+	PINCTRL_PIN(6, "GPIO_6"),
+	PINCTRL_PIN(7, "GPIO_7"),
+	PINCTRL_PIN(8, "GPIO_8"),
+	PINCTRL_PIN(9, "GPIO_9"),
+	PINCTRL_PIN(10, "GPIO_10"),
+	PINCTRL_PIN(11, "GPIO_11"),
+	PINCTRL_PIN(12, "GPIO_12"),
+	PINCTRL_PIN(13, "GPIO_13"),
+	PINCTRL_PIN(14, "GPIO_14"),
+	PINCTRL_PIN(15, "GPIO_15"),
+	PINCTRL_PIN(16, "GPIO_16"),
+	PINCTRL_PIN(17, "GPIO_17"),
+	PINCTRL_PIN(18, "GPIO_18"),
+	PINCTRL_PIN(19, "GPIO_19"),
+	PINCTRL_PIN(20, "GPIO_20"),
+	PINCTRL_PIN(21, "GPIO_21"),
+	PINCTRL_PIN(22, "GPIO_22"),
+	PINCTRL_PIN(23, "GPIO_23"),
+	PINCTRL_PIN(24, "GPIO_24"),
+	PINCTRL_PIN(25, "GPIO_25"),
+	PINCTRL_PIN(26, "GPIO_26"),
+	PINCTRL_PIN(27, "GPIO_27"),
+	PINCTRL_PIN(28, "GPIO_28"),
+	PINCTRL_PIN(29, "GPIO_29"),
+	PINCTRL_PIN(30, "GPIO_30"),
+	PINCTRL_PIN(31, "GPIO_31"),
+	PINCTRL_PIN(32, "GPIO_32"),
+	PINCTRL_PIN(33, "GPIO_33"),
+	PINCTRL_PIN(34, "GPIO_34"),
+	PINCTRL_PIN(35, "GPIO_35"),
+	PINCTRL_PIN(36, "GPIO_36"),
+	PINCTRL_PIN(37, "GPIO_37"),
+	PINCTRL_PIN(38, "GPIO_38"),
+	PINCTRL_PIN(39, "GPIO_39"),
+	PINCTRL_PIN(40, "GPIO_40"),
+	PINCTRL_PIN(41, "GPIO_41"),
+	PINCTRL_PIN(42, "GPIO_42"),
+	PINCTRL_PIN(43, "GPIO_43"),
+	PINCTRL_PIN(44, "GPIO_44"),
+	PINCTRL_PIN(45, "GPIO_45"),
+	PINCTRL_PIN(46, "GPIO_46"),
+	PINCTRL_PIN(47, "GPIO_47"),
+	PINCTRL_PIN(48, "GPIO_48"),
+	PINCTRL_PIN(49, "GPIO_49"),
+	PINCTRL_PIN(50, "GPIO_50"),
+	PINCTRL_PIN(51, "GPIO_51"),
+	PINCTRL_PIN(52, "GPIO_52"),
+	PINCTRL_PIN(53, "GPIO_53"),
+	PINCTRL_PIN(54, "GPIO_54"),
+	PINCTRL_PIN(55, "GPIO_55"),
+	PINCTRL_PIN(56, "GPIO_56"),
+	PINCTRL_PIN(57, "GPIO_57"),
+	PINCTRL_PIN(58, "GPIO_58"),
+	PINCTRL_PIN(59, "GPIO_59"),
+	PINCTRL_PIN(60, "GPIO_60"),
+	PINCTRL_PIN(61, "GPIO_61"),
+	PINCTRL_PIN(62, "GPIO_62"),
+	PINCTRL_PIN(63, "GPIO_63"),
+	PINCTRL_PIN(64, "GPIO_64"),
+	PINCTRL_PIN(65, "GPIO_65"),
+	PINCTRL_PIN(66, "GPIO_66"),
+	PINCTRL_PIN(67, "GPIO_67"),
+	PINCTRL_PIN(68, "GPIO_68"),
+	PINCTRL_PIN(69, "GPIO_69"),
+	PINCTRL_PIN(70, "GPIO_70"),
+	PINCTRL_PIN(71, "GPIO_71"),
+	PINCTRL_PIN(72, "GPIO_72"),
+	PINCTRL_PIN(73, "GPIO_73"),
+	PINCTRL_PIN(74, "GPIO_74"),
+	PINCTRL_PIN(75, "GPIO_75"),
+	PINCTRL_PIN(76, "GPIO_76"),
+	PINCTRL_PIN(77, "GPIO_77"),
+	PINCTRL_PIN(78, "GPIO_78"),
+	PINCTRL_PIN(79, "GPIO_79"),
+	PINCTRL_PIN(80, "GPIO_80"),
+	PINCTRL_PIN(81, "GPIO_81"),
+	PINCTRL_PIN(82, "GPIO_82"),
+	PINCTRL_PIN(83, "GPIO_83"),
+	PINCTRL_PIN(84, "GPIO_84"),
+	PINCTRL_PIN(85, "GPIO_85"),
+	PINCTRL_PIN(86, "GPIO_86"),
+	PINCTRL_PIN(87, "GPIO_87"),
+	PINCTRL_PIN(88, "GPIO_88"),
+	PINCTRL_PIN(89, "GPIO_89"),
+	PINCTRL_PIN(90, "GPIO_90"),
+	PINCTRL_PIN(91, "GPIO_91"),
+	PINCTRL_PIN(92, "GPIO_92"),
+	PINCTRL_PIN(93, "GPIO_93"),
+	PINCTRL_PIN(94, "GPIO_94"),
+	PINCTRL_PIN(95, "GPIO_95"),
+	PINCTRL_PIN(96, "GPIO_96"),
+	PINCTRL_PIN(97, "GPIO_97"),
+	PINCTRL_PIN(98, "GPIO_98"),
+	PINCTRL_PIN(99, "GPIO_99"),
+	PINCTRL_PIN(100, "GPIO_100"),
+	PINCTRL_PIN(101, "GPIO_101"),
+	PINCTRL_PIN(102, "GPIO_102"),
+	PINCTRL_PIN(103, "GPIO_103"),
+	PINCTRL_PIN(104, "GPIO_104"),
+	PINCTRL_PIN(105, "GPIO_105"),
+	PINCTRL_PIN(106, "GPIO_106"),
+	PINCTRL_PIN(107, "GPIO_107"),
+	PINCTRL_PIN(108, "GPIO_108"),
+	PINCTRL_PIN(109, "GPIO_109"),
+	PINCTRL_PIN(110, "GPIO_110"),
+	PINCTRL_PIN(111, "GPIO_111"),
+	PINCTRL_PIN(112, "GPIO_112"),
+	PINCTRL_PIN(113, "GPIO_113"),
+	PINCTRL_PIN(114, "GPIO_114"),
+	PINCTRL_PIN(115, "GPIO_115"),
+	PINCTRL_PIN(116, "GPIO_116"),
+	PINCTRL_PIN(117, "GPIO_117"),
+	PINCTRL_PIN(118, "GPIO_118"),
+	PINCTRL_PIN(119, "GPIO_119"),
+	PINCTRL_PIN(120, "GPIO_120"),
+	PINCTRL_PIN(121, "GPIO_121"),
+	PINCTRL_PIN(122, "GPIO_122"),
+	PINCTRL_PIN(123, "GPIO_123"),
+	PINCTRL_PIN(124, "GPIO_124"),
+	PINCTRL_PIN(125, "GPIO_125"),
+	PINCTRL_PIN(126, "GPIO_126"),
+	PINCTRL_PIN(127, "GPIO_127"),
+	PINCTRL_PIN(128, "GPIO_128"),
+	PINCTRL_PIN(129, "GPIO_129"),
+	PINCTRL_PIN(130, "GPIO_130"),
+	PINCTRL_PIN(131, "GPIO_131"),
+	PINCTRL_PIN(132, "GPIO_132"),
+	PINCTRL_PIN(133, "GPIO_133"),
+	PINCTRL_PIN(134, "GPIO_134"),
+	PINCTRL_PIN(135, "GPIO_135"),
+	PINCTRL_PIN(136, "GPIO_136"),
+	PINCTRL_PIN(137, "GPIO_137"),
+	PINCTRL_PIN(138, "GPIO_138"),
+	PINCTRL_PIN(139, "GPIO_139"),
+	PINCTRL_PIN(140, "GPIO_140"),
+	PINCTRL_PIN(141, "GPIO_141"),
+	PINCTRL_PIN(142, "GPIO_142"),
+	PINCTRL_PIN(143, "GPIO_143"),
+	PINCTRL_PIN(144, "GPIO_144"),
+	PINCTRL_PIN(145, "GPIO_145"),
+	PINCTRL_PIN(146, "GPIO_146"),
+	PINCTRL_PIN(147, "GPIO_147"),
+	PINCTRL_PIN(148, "GPIO_148"),
+	PINCTRL_PIN(149, "GPIO_149"),
+	PINCTRL_PIN(150, "GPIO_150"),
+	PINCTRL_PIN(151, "GPIO_151"),
+	PINCTRL_PIN(152, "GPIO_152"),
+	PINCTRL_PIN(153, "GPIO_153"),
+	PINCTRL_PIN(154, "GPIO_154"),
+	PINCTRL_PIN(155, "GPIO_155"),
+	PINCTRL_PIN(156, "SDC1_RCLK"),
+	PINCTRL_PIN(157, "SDC1_CLK"),
+	PINCTRL_PIN(158, "SDC1_CMD"),
+	PINCTRL_PIN(159, "SDC1_DATA"),
+	PINCTRL_PIN(160, "SDC2_CLK"),
+	PINCTRL_PIN(161, "SDC2_CMD"),
+	PINCTRL_PIN(162, "SDC2_DATA"),
+	PINCTRL_PIN(163, "UFS_RESET"),
+};
+
+#define DECLARE_MSM_GPIO_PINS(pin) \
+	static const unsigned int gpio##pin##_pins[] = { pin }
+DECLARE_MSM_GPIO_PINS(0);
+DECLARE_MSM_GPIO_PINS(1);
+DECLARE_MSM_GPIO_PINS(2);
+DECLARE_MSM_GPIO_PINS(3);
+DECLARE_MSM_GPIO_PINS(4);
+DECLARE_MSM_GPIO_PINS(5);
+DECLARE_MSM_GPIO_PINS(6);
+DECLARE_MSM_GPIO_PINS(7);
+DECLARE_MSM_GPIO_PINS(8);
+DECLARE_MSM_GPIO_PINS(9);
+DECLARE_MSM_GPIO_PINS(10);
+DECLARE_MSM_GPIO_PINS(11);
+DECLARE_MSM_GPIO_PINS(12);
+DECLARE_MSM_GPIO_PINS(13);
+DECLARE_MSM_GPIO_PINS(14);
+DECLARE_MSM_GPIO_PINS(15);
+DECLARE_MSM_GPIO_PINS(16);
+DECLARE_MSM_GPIO_PINS(17);
+DECLARE_MSM_GPIO_PINS(18);
+DECLARE_MSM_GPIO_PINS(19);
+DECLARE_MSM_GPIO_PINS(20);
+DECLARE_MSM_GPIO_PINS(21);
+DECLARE_MSM_GPIO_PINS(22);
+DECLARE_MSM_GPIO_PINS(23);
+DECLARE_MSM_GPIO_PINS(24);
+DECLARE_MSM_GPIO_PINS(25);
+DECLARE_MSM_GPIO_PINS(26);
+DECLARE_MSM_GPIO_PINS(27);
+DECLARE_MSM_GPIO_PINS(28);
+DECLARE_MSM_GPIO_PINS(29);
+DECLARE_MSM_GPIO_PINS(30);
+DECLARE_MSM_GPIO_PINS(31);
+DECLARE_MSM_GPIO_PINS(32);
+DECLARE_MSM_GPIO_PINS(33);
+DECLARE_MSM_GPIO_PINS(34);
+DECLARE_MSM_GPIO_PINS(35);
+DECLARE_MSM_GPIO_PINS(36);
+DECLARE_MSM_GPIO_PINS(37);
+DECLARE_MSM_GPIO_PINS(38);
+DECLARE_MSM_GPIO_PINS(39);
+DECLARE_MSM_GPIO_PINS(40);
+DECLARE_MSM_GPIO_PINS(41);
+DECLARE_MSM_GPIO_PINS(42);
+DECLARE_MSM_GPIO_PINS(43);
+DECLARE_MSM_GPIO_PINS(44);
+DECLARE_MSM_GPIO_PINS(45);
+DECLARE_MSM_GPIO_PINS(46);
+DECLARE_MSM_GPIO_PINS(47);
+DECLARE_MSM_GPIO_PINS(48);
+DECLARE_MSM_GPIO_PINS(49);
+DECLARE_MSM_GPIO_PINS(50);
+DECLARE_MSM_GPIO_PINS(51);
+DECLARE_MSM_GPIO_PINS(52);
+DECLARE_MSM_GPIO_PINS(53);
+DECLARE_MSM_GPIO_PINS(54);
+DECLARE_MSM_GPIO_PINS(55);
+DECLARE_MSM_GPIO_PINS(56);
+DECLARE_MSM_GPIO_PINS(57);
+DECLARE_MSM_GPIO_PINS(58);
+DECLARE_MSM_GPIO_PINS(59);
+DECLARE_MSM_GPIO_PINS(60);
+DECLARE_MSM_GPIO_PINS(61);
+DECLARE_MSM_GPIO_PINS(62);
+DECLARE_MSM_GPIO_PINS(63);
+DECLARE_MSM_GPIO_PINS(64);
+DECLARE_MSM_GPIO_PINS(65);
+DECLARE_MSM_GPIO_PINS(66);
+DECLARE_MSM_GPIO_PINS(67);
+DECLARE_MSM_GPIO_PINS(68);
+DECLARE_MSM_GPIO_PINS(69);
+DECLARE_MSM_GPIO_PINS(70);
+DECLARE_MSM_GPIO_PINS(71);
+DECLARE_MSM_GPIO_PINS(72);
+DECLARE_MSM_GPIO_PINS(73);
+DECLARE_MSM_GPIO_PINS(74);
+DECLARE_MSM_GPIO_PINS(75);
+DECLARE_MSM_GPIO_PINS(76);
+DECLARE_MSM_GPIO_PINS(77);
+DECLARE_MSM_GPIO_PINS(78);
+DECLARE_MSM_GPIO_PINS(79);
+DECLARE_MSM_GPIO_PINS(80);
+DECLARE_MSM_GPIO_PINS(81);
+DECLARE_MSM_GPIO_PINS(82);
+DECLARE_MSM_GPIO_PINS(83);
+DECLARE_MSM_GPIO_PINS(84);
+DECLARE_MSM_GPIO_PINS(85);
+DECLARE_MSM_GPIO_PINS(86);
+DECLARE_MSM_GPIO_PINS(87);
+DECLARE_MSM_GPIO_PINS(88);
+DECLARE_MSM_GPIO_PINS(89);
+DECLARE_MSM_GPIO_PINS(90);
+DECLARE_MSM_GPIO_PINS(91);
+DECLARE_MSM_GPIO_PINS(92);
+DECLARE_MSM_GPIO_PINS(93);
+DECLARE_MSM_GPIO_PINS(94);
+DECLARE_MSM_GPIO_PINS(95);
+DECLARE_MSM_GPIO_PINS(96);
+DECLARE_MSM_GPIO_PINS(97);
+DECLARE_MSM_GPIO_PINS(98);
+DECLARE_MSM_GPIO_PINS(99);
+DECLARE_MSM_GPIO_PINS(100);
+DECLARE_MSM_GPIO_PINS(101);
+DECLARE_MSM_GPIO_PINS(102);
+DECLARE_MSM_GPIO_PINS(103);
+DECLARE_MSM_GPIO_PINS(104);
+DECLARE_MSM_GPIO_PINS(105);
+DECLARE_MSM_GPIO_PINS(106);
+DECLARE_MSM_GPIO_PINS(107);
+DECLARE_MSM_GPIO_PINS(108);
+DECLARE_MSM_GPIO_PINS(109);
+DECLARE_MSM_GPIO_PINS(110);
+DECLARE_MSM_GPIO_PINS(111);
+DECLARE_MSM_GPIO_PINS(112);
+DECLARE_MSM_GPIO_PINS(113);
+DECLARE_MSM_GPIO_PINS(114);
+DECLARE_MSM_GPIO_PINS(115);
+DECLARE_MSM_GPIO_PINS(116);
+DECLARE_MSM_GPIO_PINS(117);
+DECLARE_MSM_GPIO_PINS(118);
+DECLARE_MSM_GPIO_PINS(119);
+DECLARE_MSM_GPIO_PINS(120);
+DECLARE_MSM_GPIO_PINS(121);
+DECLARE_MSM_GPIO_PINS(122);
+DECLARE_MSM_GPIO_PINS(123);
+DECLARE_MSM_GPIO_PINS(124);
+DECLARE_MSM_GPIO_PINS(125);
+DECLARE_MSM_GPIO_PINS(126);
+DECLARE_MSM_GPIO_PINS(127);
+DECLARE_MSM_GPIO_PINS(128);
+DECLARE_MSM_GPIO_PINS(129);
+DECLARE_MSM_GPIO_PINS(130);
+DECLARE_MSM_GPIO_PINS(131);
+DECLARE_MSM_GPIO_PINS(132);
+DECLARE_MSM_GPIO_PINS(133);
+DECLARE_MSM_GPIO_PINS(134);
+DECLARE_MSM_GPIO_PINS(135);
+DECLARE_MSM_GPIO_PINS(136);
+DECLARE_MSM_GPIO_PINS(137);
+DECLARE_MSM_GPIO_PINS(138);
+DECLARE_MSM_GPIO_PINS(139);
+DECLARE_MSM_GPIO_PINS(140);
+DECLARE_MSM_GPIO_PINS(141);
+DECLARE_MSM_GPIO_PINS(142);
+DECLARE_MSM_GPIO_PINS(143);
+DECLARE_MSM_GPIO_PINS(144);
+DECLARE_MSM_GPIO_PINS(145);
+DECLARE_MSM_GPIO_PINS(146);
+DECLARE_MSM_GPIO_PINS(147);
+DECLARE_MSM_GPIO_PINS(148);
+DECLARE_MSM_GPIO_PINS(149);
+DECLARE_MSM_GPIO_PINS(150);
+DECLARE_MSM_GPIO_PINS(151);
+DECLARE_MSM_GPIO_PINS(152);
+DECLARE_MSM_GPIO_PINS(153);
+DECLARE_MSM_GPIO_PINS(154);
+DECLARE_MSM_GPIO_PINS(155);
+
+static const unsigned int sdc1_rclk_pins[] = { 156 };
+static const unsigned int sdc1_clk_pins[] = { 157 };
+static const unsigned int sdc1_cmd_pins[] = { 158 };
+static const unsigned int sdc1_data_pins[] = { 159 };
+static const unsigned int sdc2_clk_pins[] = { 160 };
+static const unsigned int sdc2_cmd_pins[] = { 161 };
+static const unsigned int sdc2_data_pins[] = { 162 };
+static const unsigned int ufs_reset_pins[] = { 163 };
+
+enum sm6350_functions {
+	msm_mux_adsp_ext,
+	msm_mux_agera_pll,
+	msm_mux_atest_char,
+	msm_mux_atest_char0,
+	msm_mux_atest_char1,
+	msm_mux_atest_char2,
+	msm_mux_atest_char3,
+	msm_mux_atest_tsens,
+	msm_mux_atest_tsens2,
+	msm_mux_atest_usb1,
+	msm_mux_atest_usb10,
+	msm_mux_atest_usb11,
+	msm_mux_atest_usb12,
+	msm_mux_atest_usb13,
+	msm_mux_atest_usb2,
+	msm_mux_atest_usb20,
+	msm_mux_atest_usb21,
+	msm_mux_atest_usb22,
+	msm_mux_atest_usb23,
+	msm_mux_audio_ref,
+	msm_mux_btfm_slimbus,
+	msm_mux_cam_mclk0,
+	msm_mux_cam_mclk1,
+	msm_mux_cam_mclk2,
+	msm_mux_cam_mclk3,
+	msm_mux_cam_mclk4,
+	msm_mux_cci_async,
+	msm_mux_cci_i2c,
+	msm_mux_cci_timer0,
+	msm_mux_cci_timer1,
+	msm_mux_cci_timer2,
+	msm_mux_cci_timer3,
+	msm_mux_cci_timer4,
+	msm_mux_cri_trng,
+	msm_mux_dbg_out,
+	msm_mux_ddr_bist,
+	msm_mux_ddr_pxi0,
+	msm_mux_ddr_pxi1,
+	msm_mux_ddr_pxi2,
+	msm_mux_ddr_pxi3,
+	msm_mux_dp_hot,
+	msm_mux_edp_lcd,
+	msm_mux_gcc_gp1,
+	msm_mux_gcc_gp2,
+	msm_mux_gcc_gp3,
+	msm_mux_gp_pdm0,
+	msm_mux_gp_pdm1,
+	msm_mux_gp_pdm2,
+	msm_mux_gpio,
+	msm_mux_gps_tx,
+	msm_mux_ibi_i3c,
+	msm_mux_jitter_bist,
+	msm_mux_ldo_en,
+	msm_mux_ldo_update,
+	msm_mux_lpass_ext,
+	msm_mux_m_voc,
+	msm_mux_mclk,
+	msm_mux_mdp_vsync,
+	msm_mux_mdp_vsync0,
+	msm_mux_mdp_vsync1,
+	msm_mux_mdp_vsync2,
+	msm_mux_mdp_vsync3,
+	msm_mux_mi2s_0,
+	msm_mux_mi2s_1,
+	msm_mux_mi2s_2,
+	msm_mux_mss_lte,
+	msm_mux_nav_gpio,
+	msm_mux_nav_pps,
+	msm_mux_pa_indicator,
+	msm_mux_pcie0_clk,
+	msm_mux_phase_flag0,
+	msm_mux_phase_flag1,
+	msm_mux_phase_flag10,
+	msm_mux_phase_flag11,
+	msm_mux_phase_flag12,
+	msm_mux_phase_flag13,
+	msm_mux_phase_flag14,
+	msm_mux_phase_flag15,
+	msm_mux_phase_flag16,
+	msm_mux_phase_flag17,
+	msm_mux_phase_flag18,
+	msm_mux_phase_flag19,
+	msm_mux_phase_flag2,
+	msm_mux_phase_flag20,
+	msm_mux_phase_flag21,
+	msm_mux_phase_flag22,
+	msm_mux_phase_flag23,
+	msm_mux_phase_flag24,
+	msm_mux_phase_flag25,
+	msm_mux_phase_flag26,
+	msm_mux_phase_flag27,
+	msm_mux_phase_flag28,
+	msm_mux_phase_flag29,
+	msm_mux_phase_flag3,
+	msm_mux_phase_flag30,
+	msm_mux_phase_flag31,
+	msm_mux_phase_flag4,
+	msm_mux_phase_flag5,
+	msm_mux_phase_flag6,
+	msm_mux_phase_flag7,
+	msm_mux_phase_flag8,
+	msm_mux_phase_flag9,
+	msm_mux_pll_bist,
+	msm_mux_pll_bypassnl,
+	msm_mux_pll_reset,
+	msm_mux_prng_rosc,
+	msm_mux_qdss_cti,
+	msm_mux_qdss_gpio,
+	msm_mux_qdss_gpio0,
+	msm_mux_qdss_gpio1,
+	msm_mux_qdss_gpio10,
+	msm_mux_qdss_gpio11,
+	msm_mux_qdss_gpio12,
+	msm_mux_qdss_gpio13,
+	msm_mux_qdss_gpio14,
+	msm_mux_qdss_gpio15,
+	msm_mux_qdss_gpio2,
+	msm_mux_qdss_gpio3,
+	msm_mux_qdss_gpio4,
+	msm_mux_qdss_gpio5,
+	msm_mux_qdss_gpio6,
+	msm_mux_qdss_gpio7,
+	msm_mux_qdss_gpio8,
+	msm_mux_qdss_gpio9,
+	msm_mux_qlink0_enable,
+	msm_mux_qlink0_request,
+	msm_mux_qlink0_wmss,
+	msm_mux_qlink1_enable,
+	msm_mux_qlink1_request,
+	msm_mux_qlink1_wmss,
+	msm_mux_qup00,
+	msm_mux_qup01,
+	msm_mux_qup02,
+	msm_mux_qup10,
+	msm_mux_qup11,
+	msm_mux_qup12,
+	msm_mux_qup13_f1,
+	msm_mux_qup13_f2,
+	msm_mux_qup14,
+	msm_mux_rffe0_clk,
+	msm_mux_rffe0_data,
+	msm_mux_rffe1_clk,
+	msm_mux_rffe1_data,
+	msm_mux_rffe2_clk,
+	msm_mux_rffe2_data,
+	msm_mux_rffe3_clk,
+	msm_mux_rffe3_data,
+	msm_mux_rffe4_clk,
+	msm_mux_rffe4_data,
+	msm_mux_sd_write,
+	msm_mux_sdc1_tb,
+	msm_mux_sdc2_tb,
+	msm_mux_sp_cmu,
+	msm_mux_tgu_ch0,
+	msm_mux_tgu_ch1,
+	msm_mux_tgu_ch2,
+	msm_mux_tgu_ch3,
+	msm_mux_tsense_pwm1,
+	msm_mux_tsense_pwm2,
+	msm_mux_uim1_clk,
+	msm_mux_uim1_data,
+	msm_mux_uim1_present,
+	msm_mux_uim1_reset,
+	msm_mux_uim2_clk,
+	msm_mux_uim2_data,
+	msm_mux_uim2_present,
+	msm_mux_uim2_reset,
+	msm_mux_usb_phy,
+	msm_mux_vfr_1,
+	msm_mux_vsense_trigger,
+	msm_mux_wlan1_adc0,
+	msm_mux_wlan1_adc1,
+	msm_mux_wlan2_adc0,
+	msm_mux_wlan2_adc1,
+	msm_mux__,
+};
+
+static const char * const ibi_i3c_groups[] = {
+	"gpio0", "gpio1",
+};
+static const char * const gpio_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+	"gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
+	"gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
+	"gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
+	"gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+	"gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+	"gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
+	"gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
+	"gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
+	"gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
+	"gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
+	"gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
+	"gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91",
+	"gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98",
+	"gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104",
+	"gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110",
+	"gpio111", "gpio112", "gpio113", "gpio114", "gpio115", "gpio116",
+	"gpio117", "gpio118", "gpio119", "gpio120", "gpio121", "gpio122",
+	"gpio123", "gpio124", "gpio125", "gpio126", "gpio127", "gpio128",
+	"gpio129", "gpio130", "gpio131", "gpio132", "gpio133", "gpio134",
+	"gpio135", "gpio136", "gpio137", "gpio138", "gpio139", "gpio140",
+	"gpio141", "gpio142", "gpio143", "gpio144", "gpio145", "gpio146",
+	"gpio147", "gpio148", "gpio149", "gpio150", "gpio151", "gpio152",
+	"gpio153", "gpio154", "gpio155",
+};
+static const char * const cri_trng_groups[] = {
+	"gpio0", "gpio1", "gpio2",
+};
+static const char * const qup00_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3",
+};
+static const char * const cci_i2c_groups[] = {
+	"gpio2", "gpio3", "gpio39", "gpio40", "gpio41", "gpio42", "gpio43",
+	"gpio44",
+};
+static const char * const qdss_cti_groups[] = {
+	"gpio2", "gpio3", "gpio6", "gpio7", "gpio61", "gpio62", "gpio86",
+	"gpio87",
+};
+static const char * const sp_cmu_groups[] = {
+	"gpio3",
+};
+static const char * const dbg_out_groups[] = {
+	"gpio3",
+};
+static const char * const qup14_groups[] = {
+	"gpio4", "gpio4", "gpio5", "gpio5",
+};
+static const char * const sdc1_tb_groups[] = {
+	"gpio4",
+};
+static const char * const sdc2_tb_groups[] = {
+	"gpio5",
+};
+static const char * const mdp_vsync_groups[] = {
+	"gpio6", "gpio23", "gpio24", "gpio27", "gpio28",
+};
+static const char * const gp_pdm1_groups[] = {
+	"gpio8", "gpio52",
+};
+static const char * const qdss_gpio_groups[] = {
+	"gpio8", "gpio9", "gpio63", "gpio64",
+};
+static const char * const m_voc_groups[] = {
+	"gpio12",
+};
+static const char * const dp_hot_groups[] = {
+	"gpio12", "gpio118",
+};
+static const char * const phase_flag0_groups[] = {
+	"gpio12",
+};
+static const char * const qup10_groups[] = {
+	"gpio13", "gpio14", "gpio15", "gpio16", "gpio17",
+};
+static const char * const pll_bypassnl_groups[] = {
+	"gpio13",
+};
+static const char * const pll_reset_groups[] = {
+	"gpio14",
+};
+static const char * const phase_flag1_groups[] = {
+	"gpio17",
+};
+static const char * const phase_flag2_groups[] = {
+	"gpio18",
+};
+static const char * const qup12_groups[] = {
+	"gpio19", "gpio19", "gpio20", "gpio20",
+};
+static const char * const ddr_bist_groups[] = {
+	"gpio19", "gpio20", "gpio21", "gpio22",
+};
+static const char * const gcc_gp2_groups[] = {
+	"gpio21",
+};
+static const char * const gcc_gp3_groups[] = {
+	"gpio22",
+};
+static const char * const edp_lcd_groups[] = {
+	"gpio23",
+};
+static const char * const qup13_f1_groups[] = {
+	"gpio25", "gpio26",
+};
+static const char * const qup13_f2_groups[] = {
+	"gpio25", "gpio26",
+};
+static const char * const qup11_groups[] = {
+	"gpio27", "gpio27", "gpio28", "gpio28",
+};
+static const char * const pll_bist_groups[] = {
+	"gpio27",
+};
+static const char * const qdss_gpio14_groups[] = {
+	"gpio27", "gpio36",
+};
+static const char * const qdss_gpio15_groups[] = {
+	"gpio28", "gpio37",
+};
+static const char * const cam_mclk0_groups[] = {
+	"gpio29",
+};
+static const char * const cam_mclk1_groups[] = {
+	"gpio30",
+};
+static const char * const cam_mclk2_groups[] = {
+	"gpio31",
+};
+static const char * const cam_mclk3_groups[] = {
+	"gpio32",
+};
+static const char * const cam_mclk4_groups[] = {
+	"gpio33",
+};
+static const char * const cci_timer0_groups[] = {
+	"gpio34",
+};
+static const char * const phase_flag3_groups[] = {
+	"gpio34",
+};
+static const char * const qdss_gpio12_groups[] = {
+	"gpio34", "gpio52",
+};
+static const char * const cci_timer1_groups[] = {
+	"gpio35",
+};
+static const char * const cci_async_groups[] = {
+	"gpio35", "gpio36", "gpio48", "gpio52", "gpio53",
+};
+static const char * const phase_flag4_groups[] = {
+	"gpio35",
+};
+static const char * const qdss_gpio13_groups[] = {
+	"gpio35", "gpio53",
+};
+static const char * const cci_timer2_groups[] = {
+	"gpio36",
+};
+static const char * const phase_flag5_groups[] = {
+	"gpio36",
+};
+static const char * const cci_timer3_groups[] = {
+	"gpio37",
+};
+static const char * const gp_pdm0_groups[] = {
+	"gpio37", "gpio68",
+};
+static const char * const phase_flag6_groups[] = {
+	"gpio37",
+};
+static const char * const cci_timer4_groups[] = {
+	"gpio38",
+};
+static const char * const phase_flag7_groups[] = {
+	"gpio38",
+};
+static const char * const qdss_gpio2_groups[] = {
+	"gpio38", "gpio41",
+};
+static const char * const phase_flag8_groups[] = {
+	"gpio39",
+};
+static const char * const qdss_gpio0_groups[] = {
+	"gpio39", "gpio65",
+};
+static const char * const phase_flag9_groups[] = {
+	"gpio40",
+};
+static const char * const qdss_gpio1_groups[] = {
+	"gpio40", "gpio66",
+};
+static const char * const phase_flag10_groups[] = {
+	"gpio41",
+};
+static const char * const phase_flag11_groups[] = {
+	"gpio42",
+};
+static const char * const qdss_gpio3_groups[] = {
+	"gpio42", "gpio47",
+};
+static const char * const phase_flag12_groups[] = {
+	"gpio43",
+};
+static const char * const qdss_gpio4_groups[] = {
+	"gpio43", "gpio88",
+};
+static const char * const phase_flag13_groups[] = {
+	"gpio44",
+};
+static const char * const qdss_gpio5_groups[] = {
+	"gpio44", "gpio89",
+};
+static const char * const qup02_groups[] = {
+	"gpio45", "gpio46", "gpio48", "gpio56", "gpio57",
+};
+static const char * const phase_flag14_groups[] = {
+	"gpio45",
+};
+static const char * const qdss_gpio6_groups[] = {
+	"gpio45", "gpio90",
+};
+static const char * const phase_flag15_groups[] = {
+	"gpio46",
+};
+static const char * const qdss_gpio7_groups[] = {
+	"gpio46", "gpio91",
+};
+static const char * const mdp_vsync0_groups[] = {
+	"gpio47",
+};
+static const char * const phase_flag16_groups[] = {
+	"gpio47",
+};
+static const char * const mdp_vsync1_groups[] = {
+	"gpio48",
+};
+static const char * const gcc_gp1_groups[] = {
+	"gpio48", "gpio58",
+};
+static const char * const phase_flag17_groups[] = {
+	"gpio48",
+};
+static const char * const qdss_gpio8_groups[] = {
+	"gpio48", "gpio92",
+};
+static const char * const vfr_1_groups[] = {
+	"gpio49",
+};
+static const char * const phase_flag18_groups[] = {
+	"gpio49",
+};
+static const char * const qdss_gpio9_groups[] = {
+	"gpio49", "gpio93",
+};
+static const char * const phase_flag19_groups[] = {
+	"gpio50",
+};
+static const char * const qdss_gpio10_groups[] = {
+	"gpio50", "gpio56",
+};
+static const char * const phase_flag20_groups[] = {
+	"gpio51",
+};
+static const char * const qdss_gpio11_groups[] = {
+	"gpio51", "gpio57",
+};
+static const char * const phase_flag21_groups[] = {
+	"gpio52",
+};
+static const char * const phase_flag22_groups[] = {
+	"gpio53",
+};
+static const char * const mdp_vsync2_groups[] = {
+	"gpio56",
+};
+static const char * const phase_flag23_groups[] = {
+	"gpio56",
+};
+static const char * const mdp_vsync3_groups[] = {
+	"gpio57",
+};
+static const char * const gp_pdm2_groups[] = {
+	"gpio57",
+};
+static const char * const phase_flag24_groups[] = {
+	"gpio57",
+};
+static const char * const audio_ref_groups[] = {
+	"gpio60",
+};
+static const char * const lpass_ext_groups[] = {
+	"gpio60", "gpio93",
+};
+static const char * const mi2s_2_groups[] = {
+	"gpio60", "gpio72", "gpio73", "gpio74",
+};
+static const char * const phase_flag25_groups[] = {
+	"gpio60",
+};
+static const char * const qup01_groups[] = {
+	"gpio61", "gpio62", "gpio63", "gpio64",
+};
+static const char * const tgu_ch0_groups[] = {
+	"gpio61",
+};
+static const char * const phase_flag26_groups[] = {
+	"gpio61",
+};
+static const char * const tgu_ch1_groups[] = {
+	"gpio62",
+};
+static const char * const phase_flag27_groups[] = {
+	"gpio62",
+};
+static const char * const tgu_ch2_groups[] = {
+	"gpio63",
+};
+static const char * const phase_flag28_groups[] = {
+	"gpio63",
+};
+static const char * const tgu_ch3_groups[] = {
+	"gpio64",
+};
+static const char * const phase_flag29_groups[] = {
+	"gpio64",
+};
+static const char * const mss_lte_groups[] = {
+	"gpio65", "gpio66",
+};
+static const char * const btfm_slimbus_groups[] = {
+	"gpio67", "gpio68", "gpio86", "gpio87",
+};
+static const char * const mi2s_1_groups[] = {
+	"gpio67", "gpio68", "gpio86", "gpio87",
+};
+static const char * const phase_flag30_groups[] = {
+	"gpio67",
+};
+static const char * const phase_flag31_groups[] = {
+	"gpio68",
+};
+static const char * const uim2_data_groups[] = {
+	"gpio75",
+};
+static const char * const uim2_clk_groups[] = {
+	"gpio76",
+};
+static const char * const uim2_reset_groups[] = {
+	"gpio77",
+};
+static const char * const uim2_present_groups[] = {
+	"gpio78",
+};
+static const char * const uim1_data_groups[] = {
+	"gpio79",
+};
+static const char * const uim1_clk_groups[] = {
+	"gpio80",
+};
+static const char * const uim1_reset_groups[] = {
+	"gpio81",
+};
+static const char * const uim1_present_groups[] = {
+	"gpio82",
+};
+static const char * const atest_usb1_groups[] = {
+	"gpio83",
+};
+static const char * const atest_usb10_groups[] = {
+	"gpio84",
+};
+static const char * const sd_write_groups[] = {
+	"gpio85",
+};
+static const char * const atest_usb11_groups[] = {
+	"gpio85",
+};
+static const char * const atest_usb12_groups[] = {
+	"gpio86",
+};
+static const char * const ddr_pxi0_groups[] = {
+	"gpio86", "gpio90",
+};
+static const char * const adsp_ext_groups[] = {
+	"gpio87",
+};
+static const char * const atest_usb13_groups[] = {
+	"gpio87",
+};
+static const char * const ddr_pxi1_groups[] = {
+	"gpio87", "gpio91",
+};
+static const char * const mi2s_0_groups[] = {
+	"gpio88", "gpio89", "gpio90", "gpio91",
+};
+static const char * const atest_usb2_groups[] = {
+	"gpio88",
+};
+static const char * const ddr_pxi2_groups[] = {
+	"gpio88", "gpio92",
+};
+static const char * const tsense_pwm1_groups[] = {
+	"gpio88",
+};
+static const char * const tsense_pwm2_groups[] = {
+	"gpio88",
+};
+static const char * const agera_pll_groups[] = {
+	"gpio89",
+};
+static const char * const vsense_trigger_groups[] = {
+	"gpio89",
+};
+static const char * const atest_usb20_groups[] = {
+	"gpio89",
+};
+static const char * const ddr_pxi3_groups[] = {
+	"gpio89", "gpio93",
+};
+static const char * const jitter_bist_groups[] = {
+	"gpio90",
+};
+static const char * const wlan1_adc0_groups[] = {
+	"gpio90",
+};
+static const char * const atest_usb21_groups[] = {
+	"gpio90",
+};
+static const char * const wlan2_adc0_groups[] = {
+	"gpio91",
+};
+static const char * const atest_usb22_groups[] = {
+	"gpio91",
+};
+static const char * const atest_tsens_groups[] = {
+	"gpio92",
+};
+static const char * const wlan1_adc1_groups[] = {
+	"gpio92",
+};
+static const char * const atest_usb23_groups[] = {
+	"gpio92",
+};
+static const char * const mclk_groups[] = {
+	"gpio93",
+};
+static const char * const atest_tsens2_groups[] = {
+	"gpio93",
+};
+static const char * const wlan2_adc1_groups[] = {
+	"gpio93",
+};
+static const char * const ldo_en_groups[] = {
+	"gpio95",
+};
+static const char * const atest_char_groups[] = {
+	"gpio95",
+};
+static const char * const ldo_update_groups[] = {
+	"gpio96",
+};
+static const char * const atest_char0_groups[] = {
+	"gpio96",
+};
+static const char * const prng_rosc_groups[] = {
+	"gpio97",
+};
+static const char * const atest_char1_groups[] = {
+	"gpio97",
+};
+static const char * const atest_char2_groups[] = {
+	"gpio98",
+};
+static const char * const atest_char3_groups[] = {
+	"gpio99",
+};
+static const char * const nav_gpio_groups[] = {
+	"gpio101", "gpio102",
+};
+static const char * const nav_pps_groups[] = {
+	"gpio101", "gpio101", "gpio102", "gpio102",
+};
+static const char * const gps_tx_groups[] = {
+	"gpio101", "gpio102", "gpio107", "gpio108",
+};
+static const char * const qlink0_wmss_groups[] = {
+	"gpio103",
+};
+static const char * const qlink0_request_groups[] = {
+	"gpio104",
+};
+static const char * const qlink0_enable_groups[] = {
+	"gpio105",
+};
+static const char * const qlink1_wmss_groups[] = {
+	"gpio106",
+};
+static const char * const qlink1_request_groups[] = {
+	"gpio107",
+};
+static const char * const qlink1_enable_groups[] = {
+	"gpio108",
+};
+static const char * const rffe0_data_groups[] = {
+	"gpio109",
+};
+static const char * const rffe0_clk_groups[] = {
+	"gpio110",
+};
+static const char * const rffe1_data_groups[] = {
+	"gpio111",
+};
+static const char * const rffe1_clk_groups[] = {
+	"gpio112",
+};
+static const char * const rffe2_data_groups[] = {
+	"gpio113",
+};
+static const char * const rffe2_clk_groups[] = {
+	"gpio114",
+};
+static const char * const rffe3_data_groups[] = {
+	"gpio115",
+};
+static const char * const rffe3_clk_groups[] = {
+	"gpio116",
+};
+static const char * const rffe4_data_groups[] = {
+	"gpio117",
+};
+static const char * const rffe4_clk_groups[] = {
+	"gpio118",
+};
+static const char * const pa_indicator_groups[] = {
+	"gpio118",
+};
+static const char * const pcie0_clk_groups[] = {
+	"gpio122",
+};
+static const char * const usb_phy_groups[] = {
+	"gpio124",
+};
+
+static const struct msm_function sm6350_functions[] = {
+	FUNCTION(adsp_ext),
+	FUNCTION(agera_pll),
+	FUNCTION(atest_char),
+	FUNCTION(atest_char0),
+	FUNCTION(atest_char1),
+	FUNCTION(atest_char2),
+	FUNCTION(atest_char3),
+	FUNCTION(atest_tsens),
+	FUNCTION(atest_tsens2),
+	FUNCTION(atest_usb1),
+	FUNCTION(atest_usb10),
+	FUNCTION(atest_usb11),
+	FUNCTION(atest_usb12),
+	FUNCTION(atest_usb13),
+	FUNCTION(atest_usb2),
+	FUNCTION(atest_usb20),
+	FUNCTION(atest_usb21),
+	FUNCTION(atest_usb22),
+	FUNCTION(atest_usb23),
+	FUNCTION(audio_ref),
+	FUNCTION(btfm_slimbus),
+	FUNCTION(cam_mclk0),
+	FUNCTION(cam_mclk1),
+	FUNCTION(cam_mclk2),
+	FUNCTION(cam_mclk3),
+	FUNCTION(cam_mclk4),
+	FUNCTION(cci_async),
+	FUNCTION(cci_i2c),
+	FUNCTION(cci_timer0),
+	FUNCTION(cci_timer1),
+	FUNCTION(cci_timer2),
+	FUNCTION(cci_timer3),
+	FUNCTION(cci_timer4),
+	FUNCTION(cri_trng),
+	FUNCTION(dbg_out),
+	FUNCTION(ddr_bist),
+	FUNCTION(ddr_pxi0),
+	FUNCTION(ddr_pxi1),
+	FUNCTION(ddr_pxi2),
+	FUNCTION(ddr_pxi3),
+	FUNCTION(dp_hot),
+	FUNCTION(edp_lcd),
+	FUNCTION(gcc_gp1),
+	FUNCTION(gcc_gp2),
+	FUNCTION(gcc_gp3),
+	FUNCTION(gp_pdm0),
+	FUNCTION(gp_pdm1),
+	FUNCTION(gp_pdm2),
+	FUNCTION(gpio),
+	FUNCTION(gps_tx),
+	FUNCTION(ibi_i3c),
+	FUNCTION(jitter_bist),
+	FUNCTION(ldo_en),
+	FUNCTION(ldo_update),
+	FUNCTION(lpass_ext),
+	FUNCTION(m_voc),
+	FUNCTION(mclk),
+	FUNCTION(mdp_vsync),
+	FUNCTION(mdp_vsync0),
+	FUNCTION(mdp_vsync1),
+	FUNCTION(mdp_vsync2),
+	FUNCTION(mdp_vsync3),
+	FUNCTION(mi2s_0),
+	FUNCTION(mi2s_1),
+	FUNCTION(mi2s_2),
+	FUNCTION(mss_lte),
+	FUNCTION(nav_gpio),
+	FUNCTION(nav_pps),
+	FUNCTION(pa_indicator),
+	FUNCTION(pcie0_clk),
+	FUNCTION(phase_flag0),
+	FUNCTION(phase_flag1),
+	FUNCTION(phase_flag10),
+	FUNCTION(phase_flag11),
+	FUNCTION(phase_flag12),
+	FUNCTION(phase_flag13),
+	FUNCTION(phase_flag14),
+	FUNCTION(phase_flag15),
+	FUNCTION(phase_flag16),
+	FUNCTION(phase_flag17),
+	FUNCTION(phase_flag18),
+	FUNCTION(phase_flag19),
+	FUNCTION(phase_flag2),
+	FUNCTION(phase_flag20),
+	FUNCTION(phase_flag21),
+	FUNCTION(phase_flag22),
+	FUNCTION(phase_flag23),
+	FUNCTION(phase_flag24),
+	FUNCTION(phase_flag25),
+	FUNCTION(phase_flag26),
+	FUNCTION(phase_flag27),
+	FUNCTION(phase_flag28),
+	FUNCTION(phase_flag29),
+	FUNCTION(phase_flag3),
+	FUNCTION(phase_flag30),
+	FUNCTION(phase_flag31),
+	FUNCTION(phase_flag4),
+	FUNCTION(phase_flag5),
+	FUNCTION(phase_flag6),
+	FUNCTION(phase_flag7),
+	FUNCTION(phase_flag8),
+	FUNCTION(phase_flag9),
+	FUNCTION(pll_bist),
+	FUNCTION(pll_bypassnl),
+	FUNCTION(pll_reset),
+	FUNCTION(prng_rosc),
+	FUNCTION(qdss_cti),
+	FUNCTION(qdss_gpio),
+	FUNCTION(qdss_gpio0),
+	FUNCTION(qdss_gpio1),
+	FUNCTION(qdss_gpio10),
+	FUNCTION(qdss_gpio11),
+	FUNCTION(qdss_gpio12),
+	FUNCTION(qdss_gpio13),
+	FUNCTION(qdss_gpio14),
+	FUNCTION(qdss_gpio15),
+	FUNCTION(qdss_gpio2),
+	FUNCTION(qdss_gpio3),
+	FUNCTION(qdss_gpio4),
+	FUNCTION(qdss_gpio5),
+	FUNCTION(qdss_gpio6),
+	FUNCTION(qdss_gpio7),
+	FUNCTION(qdss_gpio8),
+	FUNCTION(qdss_gpio9),
+	FUNCTION(qlink0_enable),
+	FUNCTION(qlink0_request),
+	FUNCTION(qlink0_wmss),
+	FUNCTION(qlink1_enable),
+	FUNCTION(qlink1_request),
+	FUNCTION(qlink1_wmss),
+	FUNCTION(qup00),
+	FUNCTION(qup01),
+	FUNCTION(qup02),
+	FUNCTION(qup10),
+	FUNCTION(qup11),
+	FUNCTION(qup12),
+	FUNCTION(qup13_f1),
+	FUNCTION(qup13_f2),
+	FUNCTION(qup14),
+	FUNCTION(rffe0_clk),
+	FUNCTION(rffe0_data),
+	FUNCTION(rffe1_clk),
+	FUNCTION(rffe1_data),
+	FUNCTION(rffe2_clk),
+	FUNCTION(rffe2_data),
+	FUNCTION(rffe3_clk),
+	FUNCTION(rffe3_data),
+	FUNCTION(rffe4_clk),
+	FUNCTION(rffe4_data),
+	FUNCTION(sd_write),
+	FUNCTION(sdc1_tb),
+	FUNCTION(sdc2_tb),
+	FUNCTION(sp_cmu),
+	FUNCTION(tgu_ch0),
+	FUNCTION(tgu_ch1),
+	FUNCTION(tgu_ch2),
+	FUNCTION(tgu_ch3),
+	FUNCTION(tsense_pwm1),
+	FUNCTION(tsense_pwm2),
+	FUNCTION(uim1_clk),
+	FUNCTION(uim1_data),
+	FUNCTION(uim1_present),
+	FUNCTION(uim1_reset),
+	FUNCTION(uim2_clk),
+	FUNCTION(uim2_data),
+	FUNCTION(uim2_present),
+	FUNCTION(uim2_reset),
+	FUNCTION(usb_phy),
+	FUNCTION(vfr_1),
+	FUNCTION(vsense_trigger),
+	FUNCTION(wlan1_adc0),
+	FUNCTION(wlan1_adc1),
+	FUNCTION(wlan2_adc0),
+	FUNCTION(wlan2_adc1),
+};
+
+/*
+ * Every pin is maintained as a single group, and missing or non-existing pin
+ * would be maintained as dummy group to synchronize pin group index with
+ * pin descriptor registered with pinctrl core.
+ * Clients would not be able to request these dummy pin groups.
+ */
+static const struct msm_pingroup sm6350_groups[] = {
+	[0] = PINGROUP(0, ibi_i3c, qup00, cri_trng, _, _, _, _, _, _),
+	[1] = PINGROUP(1, ibi_i3c, qup00, cri_trng, _, _, _, _, _, _),
+	[2] = PINGROUP(2, qup00, cci_i2c, cri_trng, qdss_cti, _, _, _, _, _),
+	[3] = PINGROUP(3, qup00, cci_i2c, sp_cmu, dbg_out, qdss_cti, _, _, _, _),
+	[4] = PINGROUP(4, qup14, qup14, sdc1_tb, _, _, _, _, _, _),
+	[5] = PINGROUP(5, qup14, qup14, sdc2_tb, _, _, _, _, _, _),
+	[6] = PINGROUP(6, mdp_vsync, qdss_cti, _, _, _, _, _, _, _),
+	[7] = PINGROUP(7, qdss_cti, _, _, _, _, _, _, _, _),
+	[8] = PINGROUP(8, gp_pdm1, qdss_gpio, _, _, _, _, _, _, _),
+	[9] = PINGROUP(9, qdss_gpio, _, _, _, _, _, _, _, _),
+	[10] = PINGROUP(10, _, _, _, _, _, _, _, _, _),
+	[11] = PINGROUP(11, _, _, _, _, _, _, _, _, _),
+	[12] = PINGROUP(12, m_voc, dp_hot, _, phase_flag0, _, _, _, _, _),
+	[13] = PINGROUP(13, qup10, pll_bypassnl, _, _, _, _, _, _, _),
+	[14] = PINGROUP(14, qup10, pll_reset, _, _, _, _, _, _, _),
+	[15] = PINGROUP(15, qup10, _, _, _, _, _, _, _, _),
+	[16] = PINGROUP(16, qup10, _, _, _, _, _, _, _, _),
+	[17] = PINGROUP(17, _, phase_flag1, qup10, _, _, _, _, _, _),
+	[18] = PINGROUP(18, _, phase_flag2, _, _, _, _, _, _, _),
+	[19] = PINGROUP(19, qup12, qup12, ddr_bist, _, _, _, _, _, _),
+	[20] = PINGROUP(20, qup12, qup12, ddr_bist, _, _, _, _, _, _),
+	[21] = PINGROUP(21, gcc_gp2, ddr_bist, _, _, _, _, _, _, _),
+	[22] = PINGROUP(22, gcc_gp3, ddr_bist, _, _, _, _, _, _, _),
+	[23] = PINGROUP(23, mdp_vsync, edp_lcd, _, _, _, _, _, _, _),
+	[24] = PINGROUP(24, mdp_vsync, _, _, _, _, _, _, _, _),
+	[25] = PINGROUP(25, qup13_f1, qup13_f2, _, _, _, _, _, _, _),
+	[26] = PINGROUP(26, qup13_f1, qup13_f2, _, _, _, _, _, _, _),
+	[27] = PINGROUP(27, qup11, qup11, mdp_vsync, pll_bist, _, qdss_gpio14, _, _, _),
+	[28] = PINGROUP(28, qup11, qup11, mdp_vsync, _, qdss_gpio15, _, _, _, _),
+	[29] = PINGROUP(29, cam_mclk0, _, _, _, _, _, _, _, _),
+	[30] = PINGROUP(30, cam_mclk1, _, _, _, _, _, _, _, _),
+	[31] = PINGROUP(31, cam_mclk2, _, _, _, _, _, _, _, _),
+	[32] = PINGROUP(32, cam_mclk3, _, _, _, _, _, _, _, _),
+	[33] = PINGROUP(33, cam_mclk4, _, _, _, _, _, _, _, _),
+	[34] = PINGROUP(34, cci_timer0, _, phase_flag3, qdss_gpio12, _, _, _, _, _),
+	[35] = PINGROUP(35, cci_timer1, cci_async, _, phase_flag4, qdss_gpio13, _, _, _, _),
+	[36] = PINGROUP(36, cci_timer2, cci_async, _, phase_flag5, qdss_gpio14, _, _, _, _),
+	[37] = PINGROUP(37, cci_timer3, gp_pdm0, _, phase_flag6, qdss_gpio15, _, _, _, _),
+	[38] = PINGROUP(38, cci_timer4, _, phase_flag7, qdss_gpio2, _, _, _, _, _),
+	[39] = PINGROUP(39, cci_i2c, _, phase_flag8, qdss_gpio0, _, _, _, _, _),
+	[40] = PINGROUP(40, cci_i2c, _, phase_flag9, qdss_gpio1, _, _, _, _, _),
+	[41] = PINGROUP(41, cci_i2c, _, phase_flag10, qdss_gpio2, _, _, _, _, _),
+	[42] = PINGROUP(42, cci_i2c, _, phase_flag11, qdss_gpio3, _, _, _, _, _),
+	[43] = PINGROUP(43, cci_i2c, _, phase_flag12, qdss_gpio4, _, _, _, _, _),
+	[44] = PINGROUP(44, cci_i2c, _, phase_flag13, qdss_gpio5, _, _, _, _, _),
+	[45] = PINGROUP(45, qup02, _, phase_flag14, qdss_gpio6, _, _, _, _, _),
+	[46] = PINGROUP(46, qup02, _, phase_flag15, qdss_gpio7, _, _, _, _, _),
+	[47] = PINGROUP(47, mdp_vsync0, _, phase_flag16, qdss_gpio3, _, _, _, _, _),
+	[48] = PINGROUP(48, cci_async, mdp_vsync1, gcc_gp1, _, phase_flag17, qdss_gpio8, qup02, _, _),
+	[49] = PINGROUP(49, vfr_1, _, phase_flag18, qdss_gpio9, _, _, _, _, _),
+	[50] = PINGROUP(50, _, phase_flag19, qdss_gpio10, _, _, _, _, _, _),
+	[51] = PINGROUP(51, _, phase_flag20, qdss_gpio11, _, _, _, _, _, _),
+	[52] = PINGROUP(52, cci_async, gp_pdm1, _, phase_flag21, qdss_gpio12, _, _, _, _),
+	[53] = PINGROUP(53, cci_async, _, phase_flag22, qdss_gpio13, _, _, _, _, _),
+	[54] = PINGROUP(54, _, _, _, _, _, _, _, _, _),
+	[55] = PINGROUP(55, _, _, _, _, _, _, _, _, _),
+	[56] = PINGROUP(56, qup02, mdp_vsync2, _, phase_flag23, qdss_gpio10, _, _, _, _),
+	[57] = PINGROUP(57, qup02, mdp_vsync3, gp_pdm2, _, phase_flag24, qdss_gpio11, _, _, _),
+	[58] = PINGROUP(58, gcc_gp1, _, _, _, _, _, _, _, _),
+	[59] = PINGROUP(59, _, _, _, _, _, _, _, _, _),
+	[60] = PINGROUP(60, audio_ref, lpass_ext, mi2s_2, _, phase_flag25, _, _, _, _),
+	[61] = PINGROUP(61, qup01, tgu_ch0, _, phase_flag26, qdss_cti, _, _, _, _),
+	[62] = PINGROUP(62, qup01, tgu_ch1, _, phase_flag27, qdss_cti, _, _, _, _),
+	[63] = PINGROUP(63, qup01, tgu_ch2, _, phase_flag28, qdss_gpio, _, _, _, _),
+	[64] = PINGROUP(64, qup01, tgu_ch3, _, phase_flag29, qdss_gpio, _, _, _, _),
+	[65] = PINGROUP(65, mss_lte, _, qdss_gpio0, _, _, _, _, _, _),
+	[66] = PINGROUP(66, mss_lte, _, qdss_gpio1, _, _, _, _, _, _),
+	[67] = PINGROUP(67, btfm_slimbus, mi2s_1, _, phase_flag30, _, _, _, _, _),
+	[68] = PINGROUP(68, btfm_slimbus, mi2s_1, gp_pdm0, _, phase_flag31, _, _, _, _),
+	[69] = PINGROUP(69, _, _, _, _, _, _, _, _, _),
+	[70] = PINGROUP(70, _, _, _, _, _, _, _, _, _),
+	[71] = PINGROUP(71, _, _, _, _, _, _, _, _, _),
+	[72] = PINGROUP(72, mi2s_2, _, _, _, _, _, _, _, _),
+	[73] = PINGROUP(73, mi2s_2, _, _, _, _, _, _, _, _),
+	[74] = PINGROUP(74, mi2s_2, _, _, _, _, _, _, _, _),
+	[75] = PINGROUP(75, uim2_data, _, _, _, _, _, _, _, _),
+	[76] = PINGROUP(76, uim2_clk, _, _, _, _, _, _, _, _),
+	[77] = PINGROUP(77, uim2_reset, _, _, _, _, _, _, _, _),
+	[78] = PINGROUP(78, uim2_present, _, _, _, _, _, _, _, _),
+	[79] = PINGROUP(79, uim1_data, _, _, _, _, _, _, _, _),
+	[80] = PINGROUP(80, uim1_clk, _, _, _, _, _, _, _, _),
+	[81] = PINGROUP(81, uim1_reset, _, _, _, _, _, _, _, _),
+	[82] = PINGROUP(82, uim1_present, _, _, _, _, _, _, _, _),
+	[83] = PINGROUP(83, atest_usb1, _, _, _, _, _, _, _, _),
+	[84] = PINGROUP(84, _, atest_usb10, _, _, _, _, _, _, _),
+	[85] = PINGROUP(85, sd_write, _, atest_usb11, _, _, _, _, _, _),
+	[86] = PINGROUP(86, btfm_slimbus, mi2s_1, _, qdss_cti, atest_usb12, ddr_pxi0, _, _, _),
+	[87] = PINGROUP(87, btfm_slimbus, mi2s_1, adsp_ext, _, qdss_cti, atest_usb13, ddr_pxi1, _, _),
+	[88] = PINGROUP(88, mi2s_0, _, qdss_gpio4, _, atest_usb2, ddr_pxi2,
+			tsense_pwm1, tsense_pwm2, _),
+	[89] = PINGROUP(89, mi2s_0, agera_pll, _, qdss_gpio5, _,
+			vsense_trigger, atest_usb20, ddr_pxi3, _),
+	[90] = PINGROUP(90, mi2s_0, jitter_bist, _, qdss_gpio6, _,
+			wlan1_adc0, atest_usb21, ddr_pxi0, _),
+	[91] = PINGROUP(91, mi2s_0, _, qdss_gpio7, _, wlan2_adc0,
+			atest_usb22, ddr_pxi1, _, _),
+	[92] = PINGROUP(92, _, qdss_gpio8, atest_tsens, wlan1_adc1,
+			atest_usb23, ddr_pxi2, _, _, _),
+	[93] = PINGROUP(93, mclk, lpass_ext, _, qdss_gpio9, atest_tsens2,
+			wlan2_adc1, ddr_pxi3, _, _),
+	[94] = PINGROUP(94, _, _, _, _, _, _, _, _, _),
+	[95] = PINGROUP(95, ldo_en, _, atest_char, _, _, _, _, _, _),
+	[96] = PINGROUP(96, ldo_update, _, atest_char0, _, _, _, _, _, _),
+	[97] = PINGROUP(97, prng_rosc, _, atest_char1, _, _, _, _, _, _),
+	[98] = PINGROUP(98, _, atest_char2, _, _, _, _, _, _, _),
+	[99] = PINGROUP(99, _, atest_char3, _, _, _, _, _, _, _),
+	[100] = PINGROUP(100, _, _, _, _, _, _, _, _, _),
+	[101] = PINGROUP(101, nav_gpio, nav_pps, nav_pps, gps_tx, _, _, _, _, _),
+	[102] = PINGROUP(102, nav_gpio, nav_pps, nav_pps, gps_tx, _, _, _, _, _),
+	[103] = PINGROUP(103, qlink0_wmss, _, _, _, _, _, _, _, _),
+	[104] = PINGROUP(104, qlink0_request, _, _, _, _, _, _, _, _),
+	[105] = PINGROUP(105, qlink0_enable, _, _, _, _, _, _, _, _),
+	[106] = PINGROUP(106, qlink1_wmss, _, _, _, _, _, _, _, _),
+	[107] = PINGROUP(107, qlink1_request, gps_tx, _, _, _, _, _, _, _),
+	[108] = PINGROUP(108, qlink1_enable, gps_tx, _, _, _, _, _, _, _),
+	[109] = PINGROUP(109, rffe0_data, _, _, _, _, _, _, _, _),
+	[110] = PINGROUP(110, rffe0_clk, _, _, _, _, _, _, _, _),
+	[111] = PINGROUP(111, rffe1_data, _, _, _, _, _, _, _, _),
+	[112] = PINGROUP(112, rffe1_clk, _, _, _, _, _, _, _, _),
+	[113] = PINGROUP(113, rffe2_data, _, _, _, _, _, _, _, _),
+	[114] = PINGROUP(114, rffe2_clk, _, _, _, _, _, _, _, _),
+	[115] = PINGROUP(115, rffe3_data, _, _, _, _, _, _, _, _),
+	[116] = PINGROUP(116, rffe3_clk, _, _, _, _, _, _, _, _),
+	[117] = PINGROUP(117, rffe4_data, _, _, _, _, _, _, _, _),
+	[118] = PINGROUP(118, rffe4_clk, _, pa_indicator, dp_hot, _, _, _, _, _),
+	[119] = PINGROUP(119, _, _, _, _, _, _, _, _, _),
+	[120] = PINGROUP(120, _, _, _, _, _, _, _, _, _),
+	[121] = PINGROUP(121, _, _, _, _, _, _, _, _, _),
+	[122] = PINGROUP(122, pcie0_clk, _, _, _, _, _, _, _, _),
+	[123] = PINGROUP(123, _, _, _, _, _, _, _, _, _),
+	[124] = PINGROUP(124, usb_phy, _, _, _, _, _, _, _, _),
+	[125] = PINGROUP(125, _, _, _, _, _, _, _, _, _),
+	[126] = PINGROUP(126, _, _, _, _, _, _, _, _, _),
+	[127] = PINGROUP(127, _, _, _, _, _, _, _, _, _),
+	[128] = PINGROUP(128, _, _, _, _, _, _, _, _, _),
+	[129] = PINGROUP(129, _, _, _, _, _, _, _, _, _),
+	[130] = PINGROUP(130, _, _, _, _, _, _, _, _, _),
+	[131] = PINGROUP(131, _, _, _, _, _, _, _, _, _),
+	[132] = PINGROUP(132, _, _, _, _, _, _, _, _, _),
+	[133] = PINGROUP(133, _, _, _, _, _, _, _, _, _),
+	[134] = PINGROUP(134, _, _, _, _, _, _, _, _, _),
+	[135] = PINGROUP(135, _, _, _, _, _, _, _, _, _),
+	[136] = PINGROUP(136, _, _, _, _, _, _, _, _, _),
+	[137] = PINGROUP(137, _, _, _, _, _, _, _, _, _),
+	[138] = PINGROUP(138, _, _, _, _, _, _, _, _, _),
+	[139] = PINGROUP(139, _, _, _, _, _, _, _, _, _),
+	[140] = PINGROUP(140, _, _, _, _, _, _, _, _, _),
+	[141] = PINGROUP(141, _, _, _, _, _, _, _, _, _),
+	[142] = PINGROUP(142, _, _, _, _, _, _, _, _, _),
+	[143] = PINGROUP(143, _, _, _, _, _, _, _, _, _),
+	[144] = PINGROUP(144, _, _, _, _, _, _, _, _, _),
+	[145] = PINGROUP(145, _, _, _, _, _, _, _, _, _),
+	[146] = PINGROUP(146, _, _, _, _, _, _, _, _, _),
+	[147] = PINGROUP(147, _, _, _, _, _, _, _, _, _),
+	[148] = PINGROUP(148, _, _, _, _, _, _, _, _, _),
+	[149] = PINGROUP(149, _, _, _, _, _, _, _, _, _),
+	[150] = PINGROUP(150, _, _, _, _, _, _, _, _, _),
+	[151] = PINGROUP(151, _, _, _, _, _, _, _, _, _),
+	[152] = PINGROUP(152, _, _, _, _, _, _, _, _, _),
+	[153] = PINGROUP(153, _, _, _, _, _, _, _, _, _),
+	[154] = PINGROUP(154, _, _, _, _, _, _, _, _, _),
+	[155] = PINGROUP(155, _, _, _, _, _, _, _, _, _),
+	[156] = UFS_RESET(ufs_reset, 0xae000),
+	[157] = SDC_PINGROUP(sdc1_rclk, 0xa1000, 15, 0),
+	[158] = SDC_PINGROUP(sdc1_clk, 0xa0000, 13, 6),
+	[159] = SDC_PINGROUP(sdc1_cmd, 0xa0000, 11, 3),
+	[160] = SDC_PINGROUP(sdc1_data, 0xa0000, 9, 0),
+	[161] = SDC_PINGROUP(sdc2_clk, 0xa2000, 14, 6),
+	[162] = SDC_PINGROUP(sdc2_cmd, 0xa2000, 11, 3),
+	[163] = SDC_PINGROUP(sdc2_data, 0xa2000, 9, 0),
+};
+
+static const struct msm_gpio_wakeirq_map sm6350_pdc_map[] = {
+	{ 3, 126 }, { 4, 151 }, { 7, 58 }, { 8, 113 }, { 9, 66 }, { 11, 106 },
+	{ 12, 59 }, { 13, 112 }, { 16, 73 }, { 17, 74 }, { 18, 75 }, { 19, 76 },
+	{ 21, 130 }, { 22, 96 }, { 23, 146 }, { 24, 114 }, { 25, 83 },
+	{ 27, 84 }, { 28, 85 }, { 34, 147 }, { 35, 92 }, { 36, 93 }, { 37, 94 },
+	{ 38, 68 }, { 48, 100 }, { 50, 57 }, { 51, 81 }, { 52, 80 }, { 53, 69 },
+	{ 54, 71 }, { 55, 70 }, { 57, 152 }, { 58, 115 }, { 59, 116 }, { 60, 117 },
+	{ 61, 118 }, { 62, 119 }, { 64, 121 }, { 66, 127 }, { 67, 128 },
+	{ 69, 60 }, { 73, 78 }, { 78, 135 }, { 82, 138 }, { 83, 140 },
+	{ 84, 141 }, { 85, 98 }, { 87, 88 }, { 88, 107 }, { 89, 109 },
+	{ 90, 110 }, { 91, 111 }, { 92, 149 }, { 93, 101 }, { 94, 61 },
+	{ 95, 65 }, { 96, 95 }, { 97, 72 }, { 98, 145 }, { 99, 150 },
+	{ 100, 108 }, { 104, 129 }, { 107, 131 }, { 110, 132 }, { 112, 133 },
+	{ 114, 134 }, { 116, 136 }, { 118, 137 }, { 122, 97 }, { 123, 99 },
+	{ 124, 148 }, { 125, 82 }, { 128, 144 }, { 129, 86 }, { 131, 87 },
+	{ 133, 142 }, { 134, 143 }, { 136, 102 }, { 137, 91 }, { 138, 77 },
+	{ 139, 79 }, { 140, 90 }, { 142, 103 }, { 144, 105 }, { 147, 104 },
+	{ 153, 120 }, { 155, 67 }
+};
+
+static const struct msm_pinctrl_soc_data sm6350_pinctrl = {
+	.pins = sm6350_pins,
+	.npins = ARRAY_SIZE(sm6350_pins),
+	.functions = sm6350_functions,
+	.nfunctions = ARRAY_SIZE(sm6350_functions),
+	.groups = sm6350_groups,
+	.ngroups = ARRAY_SIZE(sm6350_groups),
+	.ngpios = 157,
+	.wakeirq_map = sm6350_pdc_map,
+	.nwakeirq_map = ARRAY_SIZE(sm6350_pdc_map),
+	.wakeirq_dual_edge_errata = true,
+};
+
+static int sm6350_pinctrl_probe(struct platform_device *pdev)
+{
+	return msm_pinctrl_probe(pdev, &sm6350_pinctrl);
+}
+
+static const struct of_device_id sm6350_pinctrl_of_match[] = {
+	{ .compatible = "qcom,sm6350-tlmm", },
+	{ },
+};
+
+static struct platform_driver sm6350_pinctrl_driver = {
+	.driver = {
+		.name = "sm6350-pinctrl",
+		.of_match_table = sm6350_pinctrl_of_match,
+	},
+	.probe = sm6350_pinctrl_probe,
+	.remove = msm_pinctrl_remove,
+};
+
+static int __init sm6350_pinctrl_init(void)
+{
+	return platform_driver_register(&sm6350_pinctrl_driver);
+}
+arch_initcall(sm6350_pinctrl_init);
+
+static void __exit sm6350_pinctrl_exit(void)
+{
+	platform_driver_unregister(&sm6350_pinctrl_driver);
+}
+module_exit(sm6350_pinctrl_exit);
+
+MODULE_DESCRIPTION("QTI sm6350 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, sm6350_pinctrl_of_match);
-- 
2.33.0


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SM6350 pinctrl bindings
  2021-08-28 17:23 [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SM6350 pinctrl bindings Konrad Dybcio
  2021-08-28 17:23 ` [PATCH v3 2/2] pinctrl: qcom: Add SM6350 pinctrl driver Konrad Dybcio
@ 2021-08-28 18:07 ` Bjorn Andersson
  2021-08-31 21:52 ` Rob Herring
  2 siblings, 0 replies; 6+ messages in thread
From: Bjorn Andersson @ 2021-08-28 18:07 UTC (permalink / raw)
  To: Konrad Dybcio
  Cc: ~postmarketos/upstreaming, martin.botka,
	angelogioacchino.delregno, marijn.suijten, jamipkettunen,
	Andy Gross, Linus Walleij, Rob Herring, linux-arm-msm,
	linux-gpio, devicetree, linux-kernel

On Sat 28 Aug 12:23 CDT 2021, Konrad Dybcio wrote:

> Add device tree binding Documentation details for Qualcomm SM6350
> pinctrl driver.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
> Changes since v2:
> - Tweak the regex to match gpio0-gpio157
> 
>  .../bindings/pinctrl/qcom,sm6350-pinctrl.yaml | 148 ++++++++++++++++++
>  1 file changed, 148 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
> new file mode 100644
> index 000000000000..554992a681f3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
> @@ -0,0 +1,148 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6350-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. SM6350 TLMM block
> +
> +maintainers:
> +  - Konrad Dybcio <konrad.dybcio@somainline.org>
> +
> +description: |
> +  This binding describes the Top Level Mode Multiplexer (TLMM) block found
> +  in the SM6350 platform.
> +
> +allOf:
> +  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: qcom,sm6350-tlmm
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts: true
> +  interrupt-controller: true
> +  '#interrupt-cells': true
> +  gpio-controller: true
> +  gpio-reserved-ranges: true
> +  '#gpio-cells': true
> +  gpio-ranges: true
> +  wakeup-parent: true
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +patternProperties:
> +  '-state$':
> +    oneOf:
> +      - $ref: "#/$defs/qcom-sm6350-tlmm-state"
> +      - patternProperties:
> +          ".*":
> +            $ref: "#/$defs/qcom-sm6350-tlmm-state"
> +
> +$defs:
> +  qcom-sm6350-tlmm-state:
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
> +
> +    properties:
> +      pins:
> +        description:
> +          List of gpio pins affected by the properties specified in this
> +          subnode.
> +        items:
> +          oneOf:
> +            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-7])$"
> +            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
> +        minItems: 1
> +        maxItems: 36
> +
> +      function:
> +        description:
> +          Specify the alternative function to be configured for the specified
> +          pins.
> +
> +        enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, atest_char2,
> +                atest_char3, atest_tsens, atest_tsens2, atest_usb1, atest_usb10, atest_usb11,
> +                atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21, atest_usb22,
> +                atest_usb23, audio_ref, btfm_slimbus, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3,
> +                cam_mclk4, cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
> +                cci_timer4, cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3,
> +                dp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0, gp_pdm1, gp_pdm2, gpio,
> +                gps_tx, ibi_i3c, jitter_bist, ldo_en, ldo_update, lpass_ext, m_voc, mclk,
> +                mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, mi2s_1, mi2s_2,
> +                mss_lte, nav_gpio, nav_pps, pa_indicator, pcie0_clk, phase_flag0, phase_flag1,
> +                phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15,
> +                phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
> +                phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26,
> +                phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31,
> +                phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9,
> +                pll_bist, pll_bypassnl, pll_reset, prng_rosc, qdss_cti, qdss_gpio, qdss_gpio0,
> +                qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
> +                qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6,
> +                qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss,
> +                qlink1_enable, qlink1_request, qlink1_wmss, qup00, qup01, qup02, qup10, qup11,
> +                qup12, qup13_f1, qup13_f2, qup14, rffe0_clk, rffe0_data, rffe1_clk, rffe1_data,
> +                rffe2_clk, rffe2_data, rffe3_clk, rffe3_data, rffe4_clk, rffe4_data, sd_write,
> +                sdc1_tb, sdc2_tb, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
> +                tsense_pwm2, uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
> +                uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
> +                wlan2_adc0, wlan2_adc1, ]
> +
> +
> +      bias-disable: true
> +      bias-pull-down: true
> +      bias-pull-up: true
> +      drive-strength: true
> +      input-enable: true
> +      output-high: true
> +      output-low: true
> +
> +    required:
> +      - pins
> +      - function
> +
> +    additionalProperties: false
> +
> +examples:
> +  - |
> +        #include <dt-bindings/interrupt-controller/arm-gic.h>
> +        pinctrl@f100000 {
> +                compatible = "qcom,sm6350-tlmm";
> +                reg = <0x0f100000 0x300000>;
> +                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +                gpio-controller;
> +                #gpio-cells = <2>;
> +                interrupt-controller;
> +                #interrupt-cells = <2>;
> +                gpio-ranges = <&tlmm 0 0 157>;
> +
> +                gpio-wo-subnode-state {
> +                        pins = "gpio1";
> +                        function = "gpio";
> +                };
> +
> +                uart-w-subnodes-state {
> +                        rx {
> +                                pins = "gpio25";
> +                                function = "qup13_f2";
> +                                bias-disable;
> +                        };
> +
> +                        tx {
> +                                pins = "gpio26";
> +                                function = "qup13_f2";
> +                                bias-disable;
> +                        };
> +                };
> +        };
> +...
> -- 
> 2.33.0
> 

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SM6350 pinctrl bindings
  2021-08-28 17:23 [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SM6350 pinctrl bindings Konrad Dybcio
  2021-08-28 17:23 ` [PATCH v3 2/2] pinctrl: qcom: Add SM6350 pinctrl driver Konrad Dybcio
  2021-08-28 18:07 ` [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SM6350 pinctrl bindings Bjorn Andersson
@ 2021-08-31 21:52 ` Rob Herring
  2 siblings, 0 replies; 6+ messages in thread
From: Rob Herring @ 2021-08-31 21:52 UTC (permalink / raw)
  To: Konrad Dybcio
  Cc: Bjorn Andersson, ~postmarketos/upstreaming, devicetree,
	Rob Herring, marijn.suijten, linux-arm-msm, martin.botka,
	angelogioacchino.delregno, linux-gpio, Linus Walleij,
	linux-kernel, Andy Gross, jamipkettunen

On Sat, 28 Aug 2021 19:23:13 +0200, Konrad Dybcio wrote:
> Add device tree binding Documentation details for Qualcomm SM6350
> pinctrl driver.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
> ---
> Changes since v2:
> - Tweak the regex to match gpio0-gpio157
> 
>  .../bindings/pinctrl/qcom,sm6350-pinctrl.yaml | 148 ++++++++++++++++++
>  1 file changed, 148 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v3 2/2] pinctrl: qcom: Add SM6350 pinctrl driver
  2021-08-28 17:23 ` [PATCH v3 2/2] pinctrl: qcom: Add SM6350 pinctrl driver Konrad Dybcio
@ 2021-09-13 17:23   ` Luca Weiss
  2021-09-14  9:56     ` Konrad Dybcio
  0 siblings, 1 reply; 6+ messages in thread
From: Luca Weiss @ 2021-09-13 17:23 UTC (permalink / raw)
  To: ~postmarketos/upstreaming
  Cc: martin.botka, angelogioacchino.delregno, marijn.suijten,
	jamipkettunen, Konrad Dybcio, Andy Gross, Bjorn Andersson,
	Linus Walleij, Rob Herring, linux-arm-msm, linux-gpio,
	devicetree, linux-kernel, Konrad Dybcio

Hi Konrad,

based on other reviews on the mailing list/IRC I have some comments here

On Samstag, 28. August 2021 19:23:14 CEST Konrad Dybcio wrote:
> This adds pincontrol driver for tlmm block found in SM6350 SoC
> 
> This patch is based on downstream copyleft code.
> 
> Reviewed-by: AngeloGioacchino Del Regno
> <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio
> <konrad.dybcio@somainline.org>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> Changes since v2:
> - Trim the forgotten-about comments
> - Add Bjorn's r-b
> 
>  drivers/pinctrl/qcom/Kconfig          |    9 +
>  drivers/pinctrl/qcom/Makefile         |    1 +
>  drivers/pinctrl/qcom/pinctrl-sm6350.c | 1593 +++++++++++++++++++++++++
>  3 files changed, 1603 insertions(+)
>  create mode 100644 drivers/pinctrl/qcom/pinctrl-sm6350.c
> 
[SNIP]
>
> +DECLARE_MSM_GPIO_PINS(128);
> +DECLARE_MSM_GPIO_PINS(129);
> +DECLARE_MSM_GPIO_PINS(130);
> +DECLARE_MSM_GPIO_PINS(131);
> +DECLARE_MSM_GPIO_PINS(132);
> +DECLARE_MSM_GPIO_PINS(133);
> +DECLARE_MSM_GPIO_PINS(134);
> +DECLARE_MSM_GPIO_PINS(135);
> +DECLARE_MSM_GPIO_PINS(136);
> +DECLARE_MSM_GPIO_PINS(137);
> +DECLARE_MSM_GPIO_PINS(138);
> +DECLARE_MSM_GPIO_PINS(139);
> +DECLARE_MSM_GPIO_PINS(140);
> +DECLARE_MSM_GPIO_PINS(141);
> +DECLARE_MSM_GPIO_PINS(142);
> +DECLARE_MSM_GPIO_PINS(143);
> +DECLARE_MSM_GPIO_PINS(144);
> +DECLARE_MSM_GPIO_PINS(145);
> +DECLARE_MSM_GPIO_PINS(146);
> +DECLARE_MSM_GPIO_PINS(147);
> +DECLARE_MSM_GPIO_PINS(148);
> +DECLARE_MSM_GPIO_PINS(149);
> +DECLARE_MSM_GPIO_PINS(150);
> +DECLARE_MSM_GPIO_PINS(151);
> +DECLARE_MSM_GPIO_PINS(152);
> +DECLARE_MSM_GPIO_PINS(153);
> +DECLARE_MSM_GPIO_PINS(154);
> +DECLARE_MSM_GPIO_PINS(155);
> +
> +static const unsigned int sdc1_rclk_pins[] = { 156 };
> +static const unsigned int sdc1_clk_pins[] = { 157 };
> +static const unsigned int sdc1_cmd_pins[] = { 158 };
> +static const unsigned int sdc1_data_pins[] = { 159 };
> +static const unsigned int sdc2_clk_pins[] = { 160 };
> +static const unsigned int sdc2_cmd_pins[] = { 161 };
> +static const unsigned int sdc2_data_pins[] = { 162 };
> +static const unsigned int ufs_reset_pins[] = { 163 };

All these numbers don't match anymore after moving ufs_reset to 156

(ref: https://lore.kernel.org/lkml/YNTYvKYDWFxUcb+Y@yoga/ )

> +
> +enum sm6350_functions {
> +	msm_mux_adsp_ext,
> +	msm_mux_agera_pll,
> +	msm_mux_atest_char,
> +	msm_mux_atest_char0,
> +	msm_mux_atest_char1,
> +	msm_mux_atest_char2,
> +	msm_mux_atest_char3,
> +	msm_mux_atest_tsens,
> +	msm_mux_atest_tsens2,
> +	msm_mux_atest_usb1,
> +	msm_mux_atest_usb10,
> +	msm_mux_atest_usb11,
> +	msm_mux_atest_usb12,
> +	msm_mux_atest_usb13,
> +	msm_mux_atest_usb2,
> +	msm_mux_atest_usb20,
> +	msm_mux_atest_usb21,
> +	msm_mux_atest_usb22,
> +	msm_mux_atest_usb23,

Bjorn mentioned to merge all the atest_usb* functions into a single one.

> +	msm_mux_audio_ref,
> +	msm_mux_btfm_slimbus,
> +	msm_mux_cam_mclk0,
> +	msm_mux_cam_mclk1,
> +	msm_mux_cam_mclk2,
> +	msm_mux_cam_mclk3,
> +	msm_mux_cam_mclk4,
> +	msm_mux_cci_async,
> +	msm_mux_cci_i2c,
> +	msm_mux_cci_timer0,
> +	msm_mux_cci_timer1,
> +	msm_mux_cci_timer2,
> +	msm_mux_cci_timer3,
> +	msm_mux_cci_timer4,
> +	msm_mux_cri_trng,
> +	msm_mux_dbg_out,
> +	msm_mux_ddr_bist,
> +	msm_mux_ddr_pxi0,
> +	msm_mux_ddr_pxi1,
> +	msm_mux_ddr_pxi2,
> +	msm_mux_ddr_pxi3,
> +	msm_mux_dp_hot,
> +	msm_mux_edp_lcd,
> +	msm_mux_gcc_gp1,
> +	msm_mux_gcc_gp2,
> +	msm_mux_gcc_gp3,
> +	msm_mux_gp_pdm0,
> +	msm_mux_gp_pdm1,
> +	msm_mux_gp_pdm2,
> +	msm_mux_gpio,
> +	msm_mux_gps_tx,
> +	msm_mux_ibi_i3c,
> +	msm_mux_jitter_bist,
> +	msm_mux_ldo_en,
> +	msm_mux_ldo_update,
> +	msm_mux_lpass_ext,
> +	msm_mux_m_voc,
> +	msm_mux_mclk,
> +	msm_mux_mdp_vsync,
> +	msm_mux_mdp_vsync0,
> +	msm_mux_mdp_vsync1,
> +	msm_mux_mdp_vsync2,
> +	msm_mux_mdp_vsync3,
> +	msm_mux_mi2s_0,
> +	msm_mux_mi2s_1,
> +	msm_mux_mi2s_2,
> +	msm_mux_mss_lte,
> +	msm_mux_nav_gpio,
> +	msm_mux_nav_pps,
> +	msm_mux_pa_indicator,
> +	msm_mux_pcie0_clk,
> +	msm_mux_phase_flag0,
> +	msm_mux_phase_flag1,
> +	msm_mux_phase_flag10,
> +	msm_mux_phase_flag11,
> +	msm_mux_phase_flag12,
> +	msm_mux_phase_flag13,
> +	msm_mux_phase_flag14,
> +	msm_mux_phase_flag15,
> +	msm_mux_phase_flag16,
> +	msm_mux_phase_flag17,
> +	msm_mux_phase_flag18,
> +	msm_mux_phase_flag19,
> +	msm_mux_phase_flag2,
> +	msm_mux_phase_flag20,
> +	msm_mux_phase_flag21,
> +	msm_mux_phase_flag22,
> +	msm_mux_phase_flag23,
> +	msm_mux_phase_flag24,
> +	msm_mux_phase_flag25,
> +	msm_mux_phase_flag26,
> +	msm_mux_phase_flag27,
> +	msm_mux_phase_flag28,
> +	msm_mux_phase_flag29,
> +	msm_mux_phase_flag3,
> +	msm_mux_phase_flag30,
> +	msm_mux_phase_flag31,
> +	msm_mux_phase_flag4,
> +	msm_mux_phase_flag5,
> +	msm_mux_phase_flag6,
> +	msm_mux_phase_flag7,
> +	msm_mux_phase_flag8,
> +	msm_mux_phase_flag9,

.. and all the phase_flag* ones.

> +	msm_mux_pll_bist,
> +	msm_mux_pll_bypassnl,
> +	msm_mux_pll_reset,
> +	msm_mux_prng_rosc,
> +	msm_mux_qdss_cti,
> +	msm_mux_qdss_gpio,
> +	msm_mux_qdss_gpio0,
> +	msm_mux_qdss_gpio1,
> +	msm_mux_qdss_gpio10,
> +	msm_mux_qdss_gpio11,
> +	msm_mux_qdss_gpio12,
> +	msm_mux_qdss_gpio13,
> +	msm_mux_qdss_gpio14,
> +	msm_mux_qdss_gpio15,
> +	msm_mux_qdss_gpio2,
> +	msm_mux_qdss_gpio3,
> +	msm_mux_qdss_gpio4,
> +	msm_mux_qdss_gpio5,
> +	msm_mux_qdss_gpio6,
> +	msm_mux_qdss_gpio7,
> +	msm_mux_qdss_gpio8,
> +	msm_mux_qdss_gpio9,
> +	msm_mux_qlink0_enable,
> +	msm_mux_qlink0_request,
> +	msm_mux_qlink0_wmss,
> +	msm_mux_qlink1_enable,
> +	msm_mux_qlink1_request,
> +	msm_mux_qlink1_wmss,
> +	msm_mux_qup00,
> +	msm_mux_qup01,
> +	msm_mux_qup02,
> +	msm_mux_qup10,
> +	msm_mux_qup11,
> +	msm_mux_qup12,
> +	msm_mux_qup13_f1,
> +	msm_mux_qup13_f2,
> +	msm_mux_qup14,
> +	msm_mux_rffe0_clk,
> +	msm_mux_rffe0_data,
> +	msm_mux_rffe1_clk,
> +	msm_mux_rffe1_data,
> +	msm_mux_rffe2_clk,
> +	msm_mux_rffe2_data,
> +	msm_mux_rffe3_clk,
> +	msm_mux_rffe3_data,
> +	msm_mux_rffe4_clk,
> +	msm_mux_rffe4_data,
> +	msm_mux_sd_write,
> +	msm_mux_sdc1_tb,
> +	msm_mux_sdc2_tb,
> +	msm_mux_sp_cmu,
> +	msm_mux_tgu_ch0,
> +	msm_mux_tgu_ch1,
> +	msm_mux_tgu_ch2,
> +	msm_mux_tgu_ch3,
> +	msm_mux_tsense_pwm1,
> +	msm_mux_tsense_pwm2,
> +	msm_mux_uim1_clk,
> +	msm_mux_uim1_data,
> +	msm_mux_uim1_present,
> +	msm_mux_uim1_reset,

maybe even uim1_* into uim1?

> +	msm_mux_uim2_clk,
> +	msm_mux_uim2_data,
> +	msm_mux_uim2_present,
> +	msm_mux_uim2_reset,

.. and uim2?

> +	msm_mux_usb_phy,
> +	msm_mux_vfr_1,
> +	msm_mux_vsense_trigger,
> +	msm_mux_wlan1_adc0,
> +	msm_mux_wlan1_adc1,
> +	msm_mux_wlan2_adc0,
> +	msm_mux_wlan2_adc1,
> +	msm_mux__,
> +};
> +
>
[SNIP]
>
> +
> +static const struct msm_pinctrl_soc_data sm6350_pinctrl = {
> +	.pins = sm6350_pins,
> +	.npins = ARRAY_SIZE(sm6350_pins),
> +	.functions = sm6350_functions,
> +	.nfunctions = ARRAY_SIZE(sm6350_functions),
> +	.groups = sm6350_groups,
> +	.ngroups = ARRAY_SIZE(sm6350_groups),
> +	.ngpios = 157,
> +	.wakeirq_map = sm6350_pdc_map,
> +	.nwakeirq_map = ARRAY_SIZE(sm6350_pdc_map),
> +	.wakeirq_dual_edge_errata = true,
> +};
> +
> +static int sm6350_pinctrl_probe(struct platform_device *pdev)
> +{
> +	return msm_pinctrl_probe(pdev, &sm6350_pinctrl);
> +}
> +
> +static const struct of_device_id sm6350_pinctrl_of_match[] = {
> +	{ .compatible = "qcom,sm6350-tlmm", },
> +	{ },

No need for a trailing comma here ;)

> +};
> +
> +static struct platform_driver sm6350_pinctrl_driver = {
> +	.driver = {
> +		.name = "sm6350-pinctrl",
> +		.of_match_table = sm6350_pinctrl_of_match,
> +	},
> +	.probe = sm6350_pinctrl_probe,
> +	.remove = msm_pinctrl_remove,
> +};
> +
> +static int __init sm6350_pinctrl_init(void)
> +{
> +	return platform_driver_register(&sm6350_pinctrl_driver);
> +}
> +arch_initcall(sm6350_pinctrl_init);
> +
> +static void __exit sm6350_pinctrl_exit(void)
> +{
> +	platform_driver_unregister(&sm6350_pinctrl_driver);
> +}
> +module_exit(sm6350_pinctrl_exit);
> +
> +MODULE_DESCRIPTION("QTI sm6350 pinctrl driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DEVICE_TABLE(of, sm6350_pinctrl_of_match);

Some/most(?) newer drivers also use the name tlmm instead of pinctrl in the 
function names and in the .name of the driver.

Regards,
Luca



^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v3 2/2] pinctrl: qcom: Add SM6350 pinctrl driver
  2021-09-13 17:23   ` Luca Weiss
@ 2021-09-14  9:56     ` Konrad Dybcio
  0 siblings, 0 replies; 6+ messages in thread
From: Konrad Dybcio @ 2021-09-14  9:56 UTC (permalink / raw)
  To: Luca Weiss, ~postmarketos/upstreaming
  Cc: martin.botka, angelogioacchino.delregno, marijn.suijten,
	jamipkettunen, Andy Gross, Bjorn Andersson, Linus Walleij,
	Rob Herring, linux-arm-msm, linux-gpio, devicetree, linux-kernel


On 13.09.2021 19:23, Luca Weiss wrote:
> Hi Konrad,
>
> based on other reviews on the mailing list/IRC 

Sorry, I wasn't very active for a while:)


> I have some comments here

>
> On Samstag, 28. August 2021 19:23:14 CEST Konrad Dybcio wrote:
>> This adds pincontrol driver for tlmm block found in SM6350 SoC
>>
>> This patch is based on downstream copyleft code.
>>
>> Reviewed-by: AngeloGioacchino Del Regno
>> <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio
>> <konrad.dybcio@somainline.org>
>> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>> ---
>> Changes since v2:
>> - Trim the forgotten-about comments
>> - Add Bjorn's r-b
>>
>>  drivers/pinctrl/qcom/Kconfig          |    9 +
>>  drivers/pinctrl/qcom/Makefile         |    1 +
>>  drivers/pinctrl/qcom/pinctrl-sm6350.c | 1593 +++++++++++++++++++++++++
>>  3 files changed, 1603 insertions(+)
>>  create mode 100644 drivers/pinctrl/qcom/pinctrl-sm6350.c
>>
> [SNIP]
>> +DECLARE_MSM_GPIO_PINS(128);
>> +DECLARE_MSM_GPIO_PINS(129);
>> +DECLARE_MSM_GPIO_PINS(130);
>> +DECLARE_MSM_GPIO_PINS(131);
>> +DECLARE_MSM_GPIO_PINS(132);
>> +DECLARE_MSM_GPIO_PINS(133);
>> +DECLARE_MSM_GPIO_PINS(134);
>> +DECLARE_MSM_GPIO_PINS(135);
>> +DECLARE_MSM_GPIO_PINS(136);
>> +DECLARE_MSM_GPIO_PINS(137);
>> +DECLARE_MSM_GPIO_PINS(138);
>> +DECLARE_MSM_GPIO_PINS(139);
>> +DECLARE_MSM_GPIO_PINS(140);
>> +DECLARE_MSM_GPIO_PINS(141);
>> +DECLARE_MSM_GPIO_PINS(142);
>> +DECLARE_MSM_GPIO_PINS(143);
>> +DECLARE_MSM_GPIO_PINS(144);
>> +DECLARE_MSM_GPIO_PINS(145);
>> +DECLARE_MSM_GPIO_PINS(146);
>> +DECLARE_MSM_GPIO_PINS(147);
>> +DECLARE_MSM_GPIO_PINS(148);
>> +DECLARE_MSM_GPIO_PINS(149);
>> +DECLARE_MSM_GPIO_PINS(150);
>> +DECLARE_MSM_GPIO_PINS(151);
>> +DECLARE_MSM_GPIO_PINS(152);
>> +DECLARE_MSM_GPIO_PINS(153);
>> +DECLARE_MSM_GPIO_PINS(154);
>> +DECLARE_MSM_GPIO_PINS(155);
>> +
>> +static const unsigned int sdc1_rclk_pins[] = { 156 };
>> +static const unsigned int sdc1_clk_pins[] = { 157 };
>> +static const unsigned int sdc1_cmd_pins[] = { 158 };
>> +static const unsigned int sdc1_data_pins[] = { 159 };
>> +static const unsigned int sdc2_clk_pins[] = { 160 };
>> +static const unsigned int sdc2_cmd_pins[] = { 161 };
>> +static const unsigned int sdc2_data_pins[] = { 162 };
>> +static const unsigned int ufs_reset_pins[] = { 163 };
> All these numbers don't match anymore after moving ufs_reset to 156
>
> (ref: https://lore.kernel.org/lkml/YNTYvKYDWFxUcb+Y@yoga/ )

Good catch, thanks!


>
>> +
>> +enum sm6350_functions {
>> +	msm_mux_adsp_ext,
>> +	msm_mux_agera_pll,
>> +	msm_mux_atest_char,
>> +	msm_mux_atest_char0,
>> +	msm_mux_atest_char1,
>> +	msm_mux_atest_char2,
>> +	msm_mux_atest_char3,
>> +	msm_mux_atest_tsens,
>> +	msm_mux_atest_tsens2,
>> +	msm_mux_atest_usb1,
>> +	msm_mux_atest_usb10,
>> +	msm_mux_atest_usb11,
>> +	msm_mux_atest_usb12,
>> +	msm_mux_atest_usb13,
>> +	msm_mux_atest_usb2,
>> +	msm_mux_atest_usb20,
>> +	msm_mux_atest_usb21,
>> +	msm_mux_atest_usb22,
>> +	msm_mux_atest_usb23,
> Bjorn mentioned to merge all the atest_usb* functions into a single one.

Will do.



>
>> +	msm_mux_audio_ref,
>> +	msm_mux_btfm_slimbus,
>> +	msm_mux_cam_mclk0,
>> +	msm_mux_cam_mclk1,
>> +	msm_mux_cam_mclk2,
>> +	msm_mux_cam_mclk3,
>> +	msm_mux_cam_mclk4,
>> +	msm_mux_cci_async,
>> +	msm_mux_cci_i2c,
>> +	msm_mux_cci_timer0,
>> +	msm_mux_cci_timer1,
>> +	msm_mux_cci_timer2,
>> +	msm_mux_cci_timer3,
>> +	msm_mux_cci_timer4,
>> +	msm_mux_cri_trng,
>> +	msm_mux_dbg_out,
>> +	msm_mux_ddr_bist,
>> +	msm_mux_ddr_pxi0,
>> +	msm_mux_ddr_pxi1,
>> +	msm_mux_ddr_pxi2,
>> +	msm_mux_ddr_pxi3,
>> +	msm_mux_dp_hot,
>> +	msm_mux_edp_lcd,
>> +	msm_mux_gcc_gp1,
>> +	msm_mux_gcc_gp2,
>> +	msm_mux_gcc_gp3,
>> +	msm_mux_gp_pdm0,
>> +	msm_mux_gp_pdm1,
>> +	msm_mux_gp_pdm2,
>> +	msm_mux_gpio,
>> +	msm_mux_gps_tx,
>> +	msm_mux_ibi_i3c,
>> +	msm_mux_jitter_bist,
>> +	msm_mux_ldo_en,
>> +	msm_mux_ldo_update,
>> +	msm_mux_lpass_ext,
>> +	msm_mux_m_voc,
>> +	msm_mux_mclk,
>> +	msm_mux_mdp_vsync,
>> +	msm_mux_mdp_vsync0,
>> +	msm_mux_mdp_vsync1,
>> +	msm_mux_mdp_vsync2,
>> +	msm_mux_mdp_vsync3,
>> +	msm_mux_mi2s_0,
>> +	msm_mux_mi2s_1,
>> +	msm_mux_mi2s_2,
>> +	msm_mux_mss_lte,
>> +	msm_mux_nav_gpio,
>> +	msm_mux_nav_pps,
>> +	msm_mux_pa_indicator,
>> +	msm_mux_pcie0_clk,
>> +	msm_mux_phase_flag0,
>> +	msm_mux_phase_flag1,
>> +	msm_mux_phase_flag10,
>> +	msm_mux_phase_flag11,
>> +	msm_mux_phase_flag12,
>> +	msm_mux_phase_flag13,
>> +	msm_mux_phase_flag14,
>> +	msm_mux_phase_flag15,
>> +	msm_mux_phase_flag16,
>> +	msm_mux_phase_flag17,
>> +	msm_mux_phase_flag18,
>> +	msm_mux_phase_flag19,
>> +	msm_mux_phase_flag2,
>> +	msm_mux_phase_flag20,
>> +	msm_mux_phase_flag21,
>> +	msm_mux_phase_flag22,
>> +	msm_mux_phase_flag23,
>> +	msm_mux_phase_flag24,
>> +	msm_mux_phase_flag25,
>> +	msm_mux_phase_flag26,
>> +	msm_mux_phase_flag27,
>> +	msm_mux_phase_flag28,
>> +	msm_mux_phase_flag29,
>> +	msm_mux_phase_flag3,
>> +	msm_mux_phase_flag30,
>> +	msm_mux_phase_flag31,
>> +	msm_mux_phase_flag4,
>> +	msm_mux_phase_flag5,
>> +	msm_mux_phase_flag6,
>> +	msm_mux_phase_flag7,
>> +	msm_mux_phase_flag8,
>> +	msm_mux_phase_flag9,
> .. and all the phase_flag* ones.

Sure


>
>> +	msm_mux_pll_bist,
>> +	msm_mux_pll_bypassnl,
>> +	msm_mux_pll_reset,
>> +	msm_mux_prng_rosc,
>> +	msm_mux_qdss_cti,
>> +	msm_mux_qdss_gpio,
>> +	msm_mux_qdss_gpio0,
>> +	msm_mux_qdss_gpio1,
>> +	msm_mux_qdss_gpio10,
>> +	msm_mux_qdss_gpio11,
>> +	msm_mux_qdss_gpio12,
>> +	msm_mux_qdss_gpio13,
>> +	msm_mux_qdss_gpio14,
>> +	msm_mux_qdss_gpio15,
>> +	msm_mux_qdss_gpio2,
>> +	msm_mux_qdss_gpio3,
>> +	msm_mux_qdss_gpio4,
>> +	msm_mux_qdss_gpio5,
>> +	msm_mux_qdss_gpio6,
>> +	msm_mux_qdss_gpio7,
>> +	msm_mux_qdss_gpio8,
>> +	msm_mux_qdss_gpio9,
>> +	msm_mux_qlink0_enable,
>> +	msm_mux_qlink0_request,
>> +	msm_mux_qlink0_wmss,
>> +	msm_mux_qlink1_enable,
>> +	msm_mux_qlink1_request,
>> +	msm_mux_qlink1_wmss,
>> +	msm_mux_qup00,
>> +	msm_mux_qup01,
>> +	msm_mux_qup02,
>> +	msm_mux_qup10,
>> +	msm_mux_qup11,
>> +	msm_mux_qup12,
>> +	msm_mux_qup13_f1,
>> +	msm_mux_qup13_f2,
>> +	msm_mux_qup14,
>> +	msm_mux_rffe0_clk,
>> +	msm_mux_rffe0_data,
>> +	msm_mux_rffe1_clk,
>> +	msm_mux_rffe1_data,
>> +	msm_mux_rffe2_clk,
>> +	msm_mux_rffe2_data,
>> +	msm_mux_rffe3_clk,
>> +	msm_mux_rffe3_data,
>> +	msm_mux_rffe4_clk,
>> +	msm_mux_rffe4_data,
>> +	msm_mux_sd_write,
>> +	msm_mux_sdc1_tb,
>> +	msm_mux_sdc2_tb,
>> +	msm_mux_sp_cmu,
>> +	msm_mux_tgu_ch0,
>> +	msm_mux_tgu_ch1,
>> +	msm_mux_tgu_ch2,
>> +	msm_mux_tgu_ch3,
>> +	msm_mux_tsense_pwm1,
>> +	msm_mux_tsense_pwm2,
>> +	msm_mux_uim1_clk,
>> +	msm_mux_uim1_data,
>> +	msm_mux_uim1_present,
>> +	msm_mux_uim1_reset,
> maybe even uim1_* into uim1?

Not sure about these ones though..


>
>> +	msm_mux_uim2_clk,
>> +	msm_mux_uim2_data,
>> +	msm_mux_uim2_present,
>> +	msm_mux_uim2_reset,
> .. and uim2?

Ditto


>> +	msm_mux_usb_phy,
>> +	msm_mux_vfr_1,
>> +	msm_mux_vsense_trigger,
>> +	msm_mux_wlan1_adc0,
>> +	msm_mux_wlan1_adc1,
>> +	msm_mux_wlan2_adc0,
>> +	msm_mux_wlan2_adc1,
>> +	msm_mux__,
>> +};
>> +
>>
> [SNIP]
>> +
>> +static const struct msm_pinctrl_soc_data sm6350_pinctrl = {
>> +	.pins = sm6350_pins,
>> +	.npins = ARRAY_SIZE(sm6350_pins),
>> +	.functions = sm6350_functions,
>> +	.nfunctions = ARRAY_SIZE(sm6350_functions),
>> +	.groups = sm6350_groups,
>> +	.ngroups = ARRAY_SIZE(sm6350_groups),
>> +	.ngpios = 157,
>> +	.wakeirq_map = sm6350_pdc_map,
>> +	.nwakeirq_map = ARRAY_SIZE(sm6350_pdc_map),
>> +	.wakeirq_dual_edge_errata = true,
>> +};
>> +
>> +static int sm6350_pinctrl_probe(struct platform_device *pdev)
>> +{
>> +	return msm_pinctrl_probe(pdev, &sm6350_pinctrl);
>> +}
>> +
>> +static const struct of_device_id sm6350_pinctrl_of_match[] = {
>> +	{ .compatible = "qcom,sm6350-tlmm", },
>> +	{ },
> No need for a trailing comma here ;)

Heh, true


>
>> +};
>> +
>> +static struct platform_driver sm6350_pinctrl_driver = {
>> +	.driver = {
>> +		.name = "sm6350-pinctrl",
>> +		.of_match_table = sm6350_pinctrl_of_match,
>> +	},
>> +	.probe = sm6350_pinctrl_probe,
>> +	.remove = msm_pinctrl_remove,
>> +};
>> +
>> +static int __init sm6350_pinctrl_init(void)
>> +{
>> +	return platform_driver_register(&sm6350_pinctrl_driver);
>> +}
>> +arch_initcall(sm6350_pinctrl_init);
>> +
>> +static void __exit sm6350_pinctrl_exit(void)
>> +{
>> +	platform_driver_unregister(&sm6350_pinctrl_driver);
>> +}
>> +module_exit(sm6350_pinctrl_exit);
>> +
>> +MODULE_DESCRIPTION("QTI sm6350 pinctrl driver");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_DEVICE_TABLE(of, sm6350_pinctrl_of_match);
> Some/most(?) newer drivers also use the name tlmm instead of pinctrl in the 
> function names and in the .name of the driver.

I can do the same for consistency.


Konrad

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2021-09-14  9:56 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-28 17:23 [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SM6350 pinctrl bindings Konrad Dybcio
2021-08-28 17:23 ` [PATCH v3 2/2] pinctrl: qcom: Add SM6350 pinctrl driver Konrad Dybcio
2021-09-13 17:23   ` Luca Weiss
2021-09-14  9:56     ` Konrad Dybcio
2021-08-28 18:07 ` [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SM6350 pinctrl bindings Bjorn Andersson
2021-08-31 21:52 ` Rob Herring

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).