LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* Re: [PATCH] rtc: Disable alarm irq if alarm is enabled and alarm time is less than or equal to current time
       [not found] <BN6PR02MB33324335E951F54DA1B00667E1D69@BN6PR02MB3332.namprd02.prod.outlook.com>
@ 2021-09-10 19:05 ` Alexandre Belloni
       [not found]   ` <9c817836-64d6-1452-189f-2783c4138ace@quicinc.com>
  0 siblings, 1 reply; 2+ messages in thread
From: Alexandre Belloni @ 2021-09-10 19:05 UTC (permalink / raw)
  To: jianbin zhang (QUIC); +Cc: a.zummo, linux-kernel, linux-rtc

Hello,

Please format your patch properly.

On 10/09/2021 08:36:03+0000, jianbin zhang (QUIC) wrote:
> If device is booted up by rtc alarm, the alarm irq  will still be enabled and the alarm time is less than current rtc time before any alarm is set or canceled .
> 
> If device is shut down this time, it will boot up automatically as the alarm irq is enabled and alarm time is less than current rtc time.
> 
> 
> 
> For the situation that the alarm time and rtc time are equal to boot up the device, we expect irq to be false until another alarm is reconfigured, then irq becomes true again.
> 
> 
> 
> So disable alarm irq if alarm is enabled and alarm time is less than or equal to current rtc time.
> 

You should probably fix your driver instead of messing with the core.
From what I understand, you have:

 1/ set the alarm
 2/ shutdown
 3/ alarm happens, the device boots
 4/ shutdown
 5/ alarm irq is still set, device boots again

At step 3, your driver has to acknowledge and clear the irq

> Signed-off-by: Jinlong Mao   <jinlmao@codeaurora.org<mailto:jinlmao@codeaurora.org>>
> 
> Signed-off-by: Jianbin Zhang <quic_jianbinz@quicinc.com<mailto:quic_jianbinz@quicinc.com>>
> 
> ---
> 
> drivers/rtc/interface.c | 20 ++++++++++++--------
> 
> 1 file changed, 12 insertions(+), 8 deletions(-)
> 
> 
> 
> diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index 9a2bd4947007..69ac54a50542 100644
> 
> --- a/drivers/rtc/interface.c
> 
> +++ b/drivers/rtc/interface.c
> 
> @@ -479,6 +479,15 @@ int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)  }  EXPORT_SYMBOL_GPL(rtc_set_alarm);
> 
> +static void rtc_alarm_disable(struct rtc_device *rtc) {
> 
> +             if (!rtc->ops || !test_bit(RTC_FEATURE_ALARM, rtc->features) || !rtc->ops->alarm_irq_enable)
> 
> +                             return;
> 
> +
> 
> +             rtc->ops->alarm_irq_enable(rtc->dev.parent, false);
> 
> +             trace_rtc_alarm_irq_enable(0, 0);
> 
> +}
> 
> +
> 
> /* Called once per device from rtc_device_register */  int rtc_initialize_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)  { @@ -506,6 +515,9 @@ int rtc_initialize_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
> 
>                                rtc->aie_timer.enabled = 1;
> 
>                                timerqueue_add(&rtc->timerqueue, &rtc->aie_timer.node);
> 
>                                trace_rtc_timer_enqueue(&rtc->aie_timer);
> 
> +             } else if (alarm->enabled && (rtc_tm_to_ktime(now) >=
> 
> +                                             rtc->aie_timer.node.expires)) {
> 
> +                             rtc_alarm_disable(rtc);
> 
>                }
> 
>                mutex_unlock(&rtc->ops_lock);
> 
>                return err;
> 
> @@ -827,14 +839,6 @@ static int rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer)
> 
>                return 0;
> 
> }
> 
> -static void rtc_alarm_disable(struct rtc_device *rtc) -{
> 
> -              if (!rtc->ops || !test_bit(RTC_FEATURE_ALARM, rtc->features) || !rtc->ops->alarm_irq_enable)
> 
> -                              return;
> 
> -
> 
> -              rtc->ops->alarm_irq_enable(rtc->dev.parent, false);
> 
> -              trace_rtc_alarm_irq_enable(0, 0);
> 
> -}
> 
>  /**
> 
>   * rtc_timer_remove - Removes a rtc_timer from the rtc_device timerqueue
> 
> --
> 
> 2.17.1
> 

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH] rtc: Disable alarm irq if alarm is enabled and alarm time is less than or equal to current time
       [not found]   ` <9c817836-64d6-1452-189f-2783c4138ace@quicinc.com>
@ 2021-09-14 21:54     ` Alexandre Belloni
  0 siblings, 0 replies; 2+ messages in thread
From: Alexandre Belloni @ 2021-09-14 21:54 UTC (permalink / raw)
  To: jianbin zhang; +Cc: a.zummo, linux-kernel, linux-rtc

On 14/09/2021 10:50:33+0800, jianbin zhang wrote:
> 
> On 9/11/21 3:05 AM, Alexandre Belloni wrote:
> > Hello,
> > 
> > Please format your patch properly.
> 
> I am so sorry for bothering you because of the patch format. I test the patch format in the local and
> 
> the format works well. Such case will not occur.
> 
> > > If device is booted up by rtc alarm, the alarm irq  will still be enabled and the alarm time is less than current rtc time before any alarm is set or canceled .
> > > 
> > > If device is shut down this time, it will boot up automatically as the alarm irq is enabled and alarm time is less than current rtc time.
> > > 
> > > 
> > > 
> > > For the situation that the alarm time and rtc time are equal to boot up the device, we expect irq to be false until another alarm is reconfigured, then irq becomes true again.
> > > 
> > > 
> > > 
> > > So disable alarm irq if alarm is enabled and alarm time is less than or equal to current rtc time.
> > > 
> > You should probably fix your driver instead of messing with the core.
> >  From what I understand, you have:
> > 
> >   1/ set the alarm
> >   2/ shutdown
> >   3/ alarm happens, the device boots
> >   4/ shutdown
> >   5/ alarm irq is still set, device boots again
> > 
> > At step 3, your driver has to acknowledge and clear the irq
> 
> Thanks for great reviewing.
> 1/Yeah, the steps you understand are right.
> 2/In fact I met the issue when using the core rtc driver.That means I do not have a private driver on the issue.
> 

Well, the core isn't a driver, which driver are you using?


-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2021-09-14 21:55 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <BN6PR02MB33324335E951F54DA1B00667E1D69@BN6PR02MB3332.namprd02.prod.outlook.com>
2021-09-10 19:05 ` [PATCH] rtc: Disable alarm irq if alarm is enabled and alarm time is less than or equal to current time Alexandre Belloni
     [not found]   ` <9c817836-64d6-1452-189f-2783c4138ace@quicinc.com>
2021-09-14 21:54     ` Alexandre Belloni

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).